openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/Documentation/devicetree/bindings/mmc/mmc-controller.yaml

395 lines
12 KiB
YAML
Raw Blame History

# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/mmc-controller.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MMC Controller Generic Binding
maintainers:
- Ulf Hansson <ulf.hansson@linaro.org>
description: |
These properties are common to multiple MMC host controllers. Any host
that requires the respective functionality should implement them using
these definitions.
It is possible to assign a fixed index mmcN to an MMC host controller
(and the corresponding mmcblkN devices) by defining an alias in the
/aliases device tree node.
properties:
$nodename:
pattern: "^mmc(@.*)?$"
"#address-cells":
const: 1
description: |
The cell is the slot ID if a function subnode is used.
"#size-cells":
const: 0
# Card Detection.
# If none of these properties are supplied, the host native card
# detect will be used. Only one of them should be provided.
broken-cd:
$ref: /schemas/types.yaml#/definitions/flag
description:
There is no card detection available; polling must be used.
cd-gpios:
description:
The card detection will be done using the GPIO provided.
non-removable:
$ref: /schemas/types.yaml#/definitions/flag
description:
Non-removable slot (like eMMC); assume always present.
# *NOTE* on CD and WP polarity. To use common for all SD/MMC host
# controllers line polarity properties, we have to fix the meaning
# of the "normal" and "inverted" line levels. We choose to follow
# the SDHCI standard, which specifies both those lines as "active
# low." Therefore, using the "cd-inverted" property means, that the
# CD line is active high, i.e. it is high, when a card is
# inserted. Similar logic applies to the "wp-inverted" property.
#
# CD and WP lines can be implemented on the hardware in one of two
# ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or
# as dedicated pins. Polarity of dedicated pins can be specified,
# using *-inverted properties. GPIO polarity can also be specified
# using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the
# latter case. We choose to use the XOR logic for GPIO CD and WP
# lines. This means, the two properties are "superimposed," for
# example leaving the GPIO_ACTIVE_LOW flag clear and specifying the
# respective *-inverted property property results in a
# double-inversion and actually means the "normal" line polarity is
# in effect.
wp-inverted:
$ref: /schemas/types.yaml#/definitions/flag
description:
The Write Protect line polarity is inverted.
cd-inverted:
$ref: /schemas/types.yaml#/definitions/flag
description:
The CD line polarity is inverted.
# Other properties
bus-width:
description:
Number of data lines.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 4, 8]
default: 1
max-frequency:
description:
Maximum operating frequency of the bus.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 400000
maximum: 200000000
disable-wp:
$ref: /schemas/types.yaml#/definitions/flag
description:
When set, no physical write-protect line is present. This
property should only be specified when the controller has a
dedicated write-protect detection logic. If a GPIO is always used
for the write-protect detection logic, it is sufficient to not
specify the wp-gpios property in the absence of a write-protect
line. Not used in combination with eMMC or SDIO.
wp-gpios:
description:
GPIO to use for the write-protect detection.
cd-debounce-delay-ms:
description:
Set delay time before detecting card after card insert
interrupt.
no-1-8-v:
$ref: /schemas/types.yaml#/definitions/flag
description:
When specified, denotes that 1.8V card voltage is not supported
on this system, even if the controller claims it.
cap-sd-highspeed:
$ref: /schemas/types.yaml#/definitions/flag
description:
SD high-speed timing is supported.
cap-mmc-highspeed:
$ref: /schemas/types.yaml#/definitions/flag
description:
MMC high-speed timing is supported.
sd-uhs-sdr12:
$ref: /schemas/types.yaml#/definitions/flag
description:
SD UHS SDR12 speed is supported.
sd-uhs-sdr25:
$ref: /schemas/types.yaml#/definitions/flag
description:
SD UHS SDR25 speed is supported.
sd-uhs-sdr50:
$ref: /schemas/types.yaml#/definitions/flag
description:
SD UHS SDR50 speed is supported.
sd-uhs-sdr104:
$ref: /schemas/types.yaml#/definitions/flag
description:
SD UHS SDR104 speed is supported.
sd-uhs-ddr50:
$ref: /schemas/types.yaml#/definitions/flag
description:
SD UHS DDR50 speed is supported.
cap-power-off-card:
$ref: /schemas/types.yaml#/definitions/flag
description:
Powering off the card is safe.
cap-mmc-hw-reset:
$ref: /schemas/types.yaml#/definitions/flag
description:
eMMC hardware reset is supported
cap-sdio-irq:
$ref: /schemas/types.yaml#/definitions/flag
description:
enable SDIO IRQ signalling on this interface
full-pwr-cycle:
$ref: /schemas/types.yaml#/definitions/flag
description:
Full power cycle of the card is supported.
full-pwr-cycle-in-suspend:
$ref: /schemas/types.yaml#/definitions/flag
description:
Full power cycle of the card in suspend is supported.
mmc-ddr-1_2v:
$ref: /schemas/types.yaml#/definitions/flag
description:
eMMC high-speed DDR mode (1.2V I/O) is supported.
mmc-ddr-1_8v:
$ref: /schemas/types.yaml#/definitions/flag
description:
eMMC high-speed DDR mode (1.8V I/O) is supported.
mmc-ddr-3_3v:
$ref: /schemas/types.yaml#/definitions/flag
description:
eMMC high-speed DDR mode (3.3V I/O) is supported.
mmc-hs200-1_2v:
$ref: /schemas/types.yaml#/definitions/flag
description:
eMMC HS200 mode (1.2V I/O) is supported.
mmc-hs200-1_8v:
$ref: /schemas/types.yaml#/definitions/flag
description:
eMMC HS200 mode (1.8V I/O) is supported.
mmc-hs400-1_2v:
$ref: /schemas/types.yaml#/definitions/flag
description:
eMMC HS400 mode (1.2V I/O) is supported.
mmc-hs400-1_8v:
$ref: /schemas/types.yaml#/definitions/flag
description:
eMMC HS400 mode (1.8V I/O) is supported.
mmc-hs400-enhanced-strobe:
$ref: /schemas/types.yaml#/definitions/flag
description:
eMMC HS400 enhanced strobe mode is supported
dsr:
description:
Value the card Driver Stage Register (DSR) should be programmed
with.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 0xffff
no-sdio:
$ref: /schemas/types.yaml#/definitions/flag
description:
Controller is limited to send SDIO commands during
initialization.
no-sd:
$ref: /schemas/types.yaml#/definitions/flag
description:
Controller is limited to send SD commands during initialization.
no-mmc:
$ref: /schemas/types.yaml#/definitions/flag
description:
Controller is limited to send MMC commands during
initialization.
fixed-emmc-driver-type:
description:
For non-removable eMMC, enforce this driver type. The value is
the driver type as specified in the eMMC specification (table
206 in spec version 5.1)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 4
post-power-on-delay-ms:
description:
It was invented for MMC pwrseq-simple which could be referred to
mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
waiting for I/O signalling and card power supply to be stable,
regardless of whether pwrseq-simple is used. Default to 10ms if
no available.
$ref: /schemas/types.yaml#/definitions/uint32
default: 10
supports-cqe:
$ref: /schemas/types.yaml#/definitions/flag
description:
The presence of this property indicates that the corresponding
MMC host controller supports HW command queue feature.
disable-cqe-dcmd:
$ref: /schemas/types.yaml#/definitions/flag
description:
The presence of this property indicates that the MMC
controller\'s command queue engine (CQE) does not support direct
commands (DCMDs).
keep-power-in-suspend:
$ref: /schemas/types.yaml#/definitions/flag
description:
SDIO only. Preserves card power during a suspend/resume cycle.
# Deprecated: enable-sdio-wakeup
wakeup-source:
$ref: /schemas/types.yaml#/definitions/flag
description:
SDIO only. Enables wake up of host system on SDIO IRQ assertion.
vmmc-supply:
description:
Supply for the card power
vqmmc-supply:
description:
Supply for the bus IO line power
mmc-pwrseq:
$ref: /schemas/types.yaml#/definitions/phandle
description:
System-on-Chip designs may specify a specific MMC power
sequence. To successfully detect an (e)MMC/SD/SDIO card, that
power sequence must be maintained while initializing the card.
patternProperties:
"^.*@[0-9]+$":
type: object
description: |
On embedded systems the cards connected to a host may need
additional properties. These can be specified in subnodes to the
host controller node. The subnodes are identified by the
standard \'reg\' property. Which information exactly can be
specified depends on the bindings for the SDIO function driver
for the subnode, as specified by the compatible string.
properties:
compatible:
description: |
Name of SDIO function following generic names recommended
practice
reg:
items:
- minimum: 0
maximum: 7
description:
Must contain the SDIO function number of the function this
subnode describes. A value of 0 denotes the memory SD
function, values from 1 to 7 denote the SDIO functions.
broken-hpi:
$ref: /schemas/types.yaml#/definitions/flag
description:
Use this to indicate that the mmc-card has a broken hpi
implementation, and that hpi should not be used.
required:
- reg
"^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 2
maxItems: 2
items:
minimum: 0
maximum: 359
description:
Set the clock (phase) delays which are to be configured in the
controller while switching to particular speed mode. These values
are in pair of degrees.
dependencies:
cd-debounce-delay-ms: [ cd-gpios ]
fixed-emmc-driver-type: [ non-removable ]
additionalProperties: true
examples:
- |
mmc@ab000000 {
compatible = "sdhci";
reg = <0xab000000 0x200>;
interrupts = <23>;
bus-width = <4>;
cd-gpios = <&gpio 69 0>;
cd-inverted;
wp-gpios = <&gpio 70 0>;
max-frequency = <50000000>;
keep-power-in-suspend;
wakeup-source;
mmc-pwrseq = <&sdhci0_pwrseq>;
clk-phase-sd-hs = <63>, <72>;
};
- |
mmc3: mmc@1c12000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1c12000 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vmmc3>;
bus-width = <4>;
non-removable;
mmc-pwrseq = <&sdhci0_pwrseq>;
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm43xx-fmac";
interrupt-parent = <&pio>;
interrupts = <10 8>;
interrupt-names = "host-wake";
};
};
Reference in New Issue View Git Blame Copy Permalink