mirror of https://gitee.com/openkylin/linux.git
103 lines
3.4 KiB
Plaintext
103 lines
3.4 KiB
Plaintext
Dialog Semiconductor DA7218 Audio Codec bindings
|
|
|
|
DA7218 is an audio codec with HP detect feature.
|
|
|
|
======
|
|
|
|
Required properties:
|
|
- compatible : Should be "dlg,da7217" or "dlg,da7218"
|
|
- reg: Specifies the I2C slave address
|
|
|
|
- VDD-supply: VDD power supply for the device
|
|
- VDDMIC-supply: VDDMIC power supply for the device
|
|
- VDDIO-supply: VDDIO power supply for the device
|
|
(See Documentation/devicetree/bindings/regulator/regulator.txt for further
|
|
information relating to regulators)
|
|
|
|
Optional properties:
|
|
- interrupts: IRQ line info for DA7218 chip.
|
|
(See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
|
|
further information relating to interrupt properties)
|
|
- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
|
|
interrupt is to be used to wake system, otherwise "irq" should be used.
|
|
- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
|
|
|
|
- clocks : phandle and clock specifier for codec MCLK.
|
|
- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
|
|
|
|
- dlg,micbias1-lvl-millivolt : Voltage (mV) for Mic Bias 1
|
|
[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
|
|
- dlg,micbias2-lvl-millivolt : Voltage (mV) for Mic Bias 2
|
|
[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
|
|
- dlg,mic1-amp-in-sel : Mic1 input source type
|
|
["diff", "se_p", "se_n"]
|
|
- dlg,mic2-amp-in-sel : Mic2 input source type
|
|
["diff", "se_p", "se_n"]
|
|
- dlg,dmic1-data-sel : DMIC1 channel select based on clock edge.
|
|
["lrise_rfall", "lfall_rrise"]
|
|
- dlg,dmic1-samplephase : When to sample audio from DMIC1.
|
|
["on_clkedge", "between_clkedge"]
|
|
- dlg,dmic1-clkrate-hz : DMic1 clock frequency (Hz).
|
|
[<1500000>, <3000000>]
|
|
- dlg,dmic2-data-sel : DMic2 channel select based on clock edge.
|
|
["lrise_rfall", "lfall_rrise"]
|
|
- dlg,dmic2-samplephase : When to sample audio from DMic2.
|
|
["on_clkedge", "between_clkedge"]
|
|
- dlg,dmic2-clkrate-hz : DMic2 clock frequency (Hz).
|
|
[<1500000>, <3000000>]
|
|
- dlg,hp-diff-single-supply : Boolean flag, use single supply for HP
|
|
(DA7217 only)
|
|
|
|
======
|
|
|
|
Optional Child node - 'da7218_hpldet' (DA7218 only):
|
|
|
|
Optional properties:
|
|
- dlg,jack-rate-us : Time between jack detect measurements (us)
|
|
[<5>, <10>, <20>, <40>, <80>, <160>, <320>, <640>]
|
|
- dlg,jack-debounce : Number of debounce measurements taken for jack detect
|
|
[<0>, <2>, <3>, <4>]
|
|
- dlg,jack-threshold-pct : Threshold level for jack detection (% of VDD)
|
|
[<84>, <88>, <92>, <96>]
|
|
- dlg,comp-inv : Boolean flag, invert comparator output
|
|
- dlg,hyst : Boolean flag, enable hysteresis
|
|
- dlg,discharge : Boolean flag, auto discharge of Mic Bias on jack removal
|
|
|
|
======
|
|
|
|
Example:
|
|
|
|
codec: da7218@1a {
|
|
compatible = "dlg,da7218";
|
|
reg = <0x1a>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
wakeup-source;
|
|
|
|
VDD-supply = <®_audio>;
|
|
VDDMIC-supply = <®_audio>;
|
|
VDDIO-supply = <®_audio>;
|
|
|
|
clocks = <&clks 201>;
|
|
clock-names = "mclk";
|
|
|
|
dlg,micbias1-lvl-millivolt = <2600>;
|
|
dlg,micbias2-lvl-millivolt = <2600>;
|
|
dlg,mic1-amp-in-sel = "diff";
|
|
dlg,mic2-amp-in-sel = "diff";
|
|
|
|
dlg,dmic1-data-sel = "lrise_rfall";
|
|
dlg,dmic1-samplephase = "on_clkedge";
|
|
dlg,dmic1-clkrate-hz = <3000000>;
|
|
dlg,dmic2-data-sel = "lrise_rfall";
|
|
dlg,dmic2-samplephase = "on_clkedge";
|
|
dlg,dmic2-clkrate-hz = <3000000>;
|
|
|
|
da7218_hpldet {
|
|
dlg,jack-rate-us = <40>;
|
|
dlg,jack-debounce = <2>;
|
|
dlg,jack-threshold-pct = <84>;
|
|
dlg,hyst;
|
|
};
|
|
};
|