linux/arch/mips/pci/pci-xlp.c

249 lines
6.7 KiB
C

/*
* Copyright (c) 2003-2012 Broadcom Corporation
* All Rights Reserved
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the Broadcom
* license below:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/msi.h>
#include <linux/mm.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/console.h>
#include <asm/io.h>
#include <asm/netlogic/interrupt.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlp-hal/iomap.h>
#include <asm/netlogic/xlp-hal/pic.h>
#include <asm/netlogic/xlp-hal/xlp.h>
#include <asm/netlogic/xlp-hal/pcibus.h>
#include <asm/netlogic/xlp-hal/bridge.h>
static void *pci_config_base;
#define pci_cfg_addr(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
/* PCI ops */
static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn,
int where)
{
u32 data;
u32 *cfgaddr;
cfgaddr = (u32 *)(pci_config_base +
pci_cfg_addr(bus->number, devfn, where & ~3));
data = *cfgaddr;
return data;
}
static inline void pci_cfg_write_32bit(struct pci_bus *bus, unsigned int devfn,
int where, u32 data)
{
u32 *cfgaddr;
cfgaddr = (u32 *)(pci_config_base +
pci_cfg_addr(bus->number, devfn, where & ~3));
*cfgaddr = data;
}
static int nlm_pcibios_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
u32 data;
if ((size == 2) && (where & 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
else if ((size == 4) && (where & 3))
return PCIBIOS_BAD_REGISTER_NUMBER;
data = pci_cfg_read_32bit(bus, devfn, where);
if (size == 1)
*val = (data >> ((where & 3) << 3)) & 0xff;
else if (size == 2)
*val = (data >> ((where & 3) << 3)) & 0xffff;
else
*val = data;
return PCIBIOS_SUCCESSFUL;
}
static int nlm_pcibios_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
u32 data;
if ((size == 2) && (where & 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
else if ((size == 4) && (where & 3))
return PCIBIOS_BAD_REGISTER_NUMBER;
data = pci_cfg_read_32bit(bus, devfn, where);
if (size == 1)
data = (data & ~(0xff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
else if (size == 2)
data = (data & ~(0xffff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
else
data = val;
pci_cfg_write_32bit(bus, devfn, where, data);
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops nlm_pci_ops = {
.read = nlm_pcibios_read,
.write = nlm_pcibios_write
};
static struct resource nlm_pci_mem_resource = {
.name = "XLP PCI MEM",
.start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */
.end = 0xdfffffffUL,
.flags = IORESOURCE_MEM,
};
static struct resource nlm_pci_io_resource = {
.name = "XLP IO MEM",
.start = 0x14000000UL, /* 64MB PCI IO @ 0x1000_0000 */
.end = 0x17ffffffUL,
.flags = IORESOURCE_IO,
};
struct pci_controller nlm_pci_controller = {
.index = 0,
.pci_ops = &nlm_pci_ops,
.mem_resource = &nlm_pci_mem_resource,
.mem_offset = 0x00000000UL,
.io_resource = &nlm_pci_io_resource,
.io_offset = 0x00000000UL,
};
static int get_irq_vector(const struct pci_dev *dev)
{
/*
* For XLP PCIe, there is an IRQ per Link, find out which
* link the device is on to assign interrupts
*/
if (dev->bus->self == NULL)
return 0;
switch (dev->bus->self->devfn) {
case 0x8:
return PIC_PCIE_LINK_0_IRQ;
case 0x9:
return PIC_PCIE_LINK_1_IRQ;
case 0xa:
return PIC_PCIE_LINK_2_IRQ;
case 0xb:
return PIC_PCIE_LINK_3_IRQ;
}
WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
return 0;
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return get_irq_vector(dev);
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
static int xlp_enable_pci_bswap(void)
{
uint64_t pciebase, sysbase;
int node, i;
u32 reg;
/* Chip-0 so node set to 0 */
node = 0;
sysbase = nlm_get_bridge_regbase(node);
/*
* Enable byte swap in hardware. Program each link's PCIe SWAP regions
* from the link's address ranges.
*/
for (i = 0; i < 4; i++) {
pciebase = nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, i));
if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff)
continue;
reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_BASE0 + i);
nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_BASE, reg);
reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_LIMIT0 + i);
nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_LIM,
reg | 0xfff);
reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_BASE0 + i);
nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_BASE, reg);
reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_LIMIT0 + i);
nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff);
}
return 0;
}
static int __init pcibios_init(void)
{
/* Firmware assigns PCI resources */
pci_set_flags(PCI_PROBE_ONLY);
pci_config_base = ioremap(XLP_DEFAULT_PCI_ECFG_BASE, 64 << 20);
/* Extend IO port for memory mapped io */
ioport_resource.start = 0;
ioport_resource.end = ~0;
xlp_enable_pci_bswap();
set_io_port_base(CKSEG1);
nlm_pci_controller.io_map_base = CKSEG1;
register_pci_controller(&nlm_pci_controller);
pr_info("XLP PCIe Controller %pR%pR.\n", &nlm_pci_io_resource,
&nlm_pci_mem_resource);
return 0;
}
arch_initcall(pcibios_init);