openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/iio
History
Peter Rosin 08f3ffce6e iio: imu: inv_mpu6050: inform the i2c mux core about how it is used 
The i2c mux core can then take appropriate action depending on if it is
used for an actual i2c mux, or for an arbitrator or gate. In this case
it is used as a gate.

This will make devicetree bindings simpler when they are eventually
added.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
 		2016-11-12 14:44:45 +00:00
..
accel iio: accel: st_accel: add support to lng2dm 2016-11-01 18:50:02 +00:00
adc iio:adc: ad7766: testing the wrong variable in probe 2016-11-12 14:35:21 +00:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio: add resource managed triggered buffer init helpers 2016-09-04 15:42:46 +01:00
chemical iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value 2016-10-23 22:18:27 +01:00
common iio: cros_ec_sensors_core: fix unsigned compared less than zero on status 2016-11-12 14:38:38 +00:00
counter iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
dac iio: dac: mcp4725: fix odd_ptr_err.cocci warnings 2016-10-23 19:34:27 +01:00
dummy iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio: gyro: mpu3050: add I2C dependency 2016-11-08 20:29:33 +00:00
health First round of IIO new device support, features and cleanups for the 4.8 cycle. 2016-06-09 09:15:58 -07:00
humidity iio: si7020: Add devicetree support and trivial bindings 2016-11-01 18:49:53 +00:00
imu iio: imu: inv_mpu6050: inform the i2c mux core about how it is used 2016-11-12 14:44:45 +00:00
light iio: light: ltr501: claim direct mode during raw writes 2016-10-23 19:34:08 +01:00
magnetometer iio: magnetometer: ak8974: small endianness fixes 2016-10-03 21:30:00 +01:00
orientation
…
potentiometer iio: potentiometer: Fix typo in Kconfig 2016-07-03 12:40:01 +01:00
potentiostat iio: potentiostat: add LMP91000 support 2016-09-27 20:33:03 +01:00
pressure First round of IIO new device support, features and cleanups for the 4.10 cycle. 2016-10-24 11:34:22 +02:00
proximity iio: proximity: pulsedlight-lidar-lite-v2: cleanup power management 2016-10-23 19:34:26 +01:00
temperature Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle 2016-11-07 09:14:03 +01:00
trigger iio:trigger: Experimental kthread tight loop trigger (thread only) 2016-06-03 13:18:44 +01:00
Kconfig iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
Makefile iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
iio_core_trigger.h
…
industrialio-buffer.c iio: Use kmalloc_array() in iio_scan_mask_set() 2016-09-24 16:35:24 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c iio: Implement counter channel type and info constants 2016-10-01 17:06:02 +01:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio:trigger: Add helper function to verify that a trigger belongs to the same device 2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: inkern: add iio_read_channel_offset helper 2016-09-27 20:33:02 +01:00