mirror of https://gitee.com/openkylin/linux.git
203 lines
7.4 KiB
C
203 lines
7.4 KiB
C
/* drivers/char/ser_a2232.h */
|
|
|
|
/* $Id: ser_a2232.h,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */
|
|
|
|
/* Linux serial driver for the Amiga A2232 board */
|
|
|
|
/* This driver is MAINTAINED. Before applying any changes, please contact
|
|
* the author.
|
|
*/
|
|
|
|
/* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de>
|
|
* alias The A2232 driver project <A2232@gmx.net>
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#ifndef _SER_A2232_H_
|
|
#define _SER_A2232_H_
|
|
|
|
/*
|
|
How many boards are to be supported at maximum;
|
|
"up to five A2232 Multiport Serial Cards may be installed in a
|
|
single Amiga 2000" states the A2232 User's Guide. If you have
|
|
more slots available, you might want to change the value below.
|
|
*/
|
|
#define MAX_A2232_BOARDS 5
|
|
|
|
#ifndef A2232_NORMAL_MAJOR
|
|
/* This allows overriding on the compiler commandline, or in a "major.h"
|
|
include or something like that */
|
|
#define A2232_NORMAL_MAJOR 224 /* /dev/ttyY* */
|
|
#define A2232_CALLOUT_MAJOR 225 /* /dev/cuy* */
|
|
#endif
|
|
|
|
/* Some magic is always good - Who knows :) */
|
|
#define A2232_MAGIC 0x000a2232
|
|
|
|
/* A2232 port structure to keep track of the
|
|
status of every single line used */
|
|
struct a2232_port{
|
|
struct gs_port gs;
|
|
unsigned int which_a2232;
|
|
unsigned int which_port_on_a2232;
|
|
short disable_rx;
|
|
short throttle_input;
|
|
short cd_status;
|
|
};
|
|
|
|
#define NUMLINES 7 /* number of lines per board */
|
|
#define A2232_IOBUFLEN 256 /* number of bytes per buffer */
|
|
#define A2232_IOBUFLENMASK 0xff /* mask for maximum number of bytes */
|
|
|
|
|
|
#define A2232_UNKNOWN 0 /* crystal not known */
|
|
#define A2232_NORMAL 1 /* normal A2232 (1.8432 MHz oscillator) */
|
|
#define A2232_TURBO 2 /* turbo A2232 (3.6864 MHz oscillator) */
|
|
|
|
|
|
struct a2232common {
|
|
char Crystal; /* normal (1) or turbo (2) board? */
|
|
u_char Pad_a;
|
|
u_char TimerH; /* timer value after speed check */
|
|
u_char TimerL;
|
|
u_char CDHead; /* head pointer for CD message queue */
|
|
u_char CDTail; /* tail pointer for CD message queue */
|
|
u_char CDStatus;
|
|
u_char Pad_b;
|
|
};
|
|
|
|
struct a2232status {
|
|
u_char InHead; /* input queue head */
|
|
u_char InTail; /* input queue tail */
|
|
u_char OutDisable; /* disables output */
|
|
u_char OutHead; /* output queue head */
|
|
u_char OutTail; /* output queue tail */
|
|
u_char OutCtrl; /* soft flow control character to send */
|
|
u_char OutFlush; /* flushes output buffer */
|
|
u_char Setup; /* causes reconfiguration */
|
|
u_char Param; /* parameter byte - see A2232PARAM */
|
|
u_char Command; /* command byte - see A2232CMD */
|
|
u_char SoftFlow; /* enables xon/xoff flow control */
|
|
/* private 65EC02 fields: */
|
|
u_char XonOff; /* stores XON/XOFF enable/disable */
|
|
};
|
|
|
|
#define A2232_MEMPAD1 \
|
|
(0x0200 - NUMLINES * sizeof(struct a2232status) - \
|
|
sizeof(struct a2232common))
|
|
#define A2232_MEMPAD2 (0x2000 - NUMLINES * A2232_IOBUFLEN - A2232_IOBUFLEN)
|
|
|
|
struct a2232memory {
|
|
struct a2232status Status[NUMLINES]; /* 0x0000-0x006f status areas */
|
|
struct a2232common Common; /* 0x0070-0x0077 common flags */
|
|
u_char Dummy1[A2232_MEMPAD1]; /* 0x00XX-0x01ff */
|
|
u_char OutBuf[NUMLINES][A2232_IOBUFLEN];/* 0x0200-0x08ff output bufs */
|
|
u_char InBuf[NUMLINES][A2232_IOBUFLEN]; /* 0x0900-0x0fff input bufs */
|
|
u_char InCtl[NUMLINES][A2232_IOBUFLEN]; /* 0x1000-0x16ff control data */
|
|
u_char CDBuf[A2232_IOBUFLEN]; /* 0x1700-0x17ff CD event buffer */
|
|
u_char Dummy2[A2232_MEMPAD2]; /* 0x1800-0x2fff */
|
|
u_char Code[0x1000]; /* 0x3000-0x3fff code area */
|
|
u_short InterruptAck; /* 0x4000 intr ack */
|
|
u_char Dummy3[0x3ffe]; /* 0x4002-0x7fff */
|
|
u_short Enable6502Reset; /* 0x8000 Stop board, */
|
|
/* 6502 RESET line held low */
|
|
u_char Dummy4[0x3ffe]; /* 0x8002-0xbfff */
|
|
u_short ResetBoard; /* 0xc000 reset board & run, */
|
|
/* 6502 RESET line held high */
|
|
};
|
|
|
|
#undef A2232_MEMPAD1
|
|
#undef A2232_MEMPAD2
|
|
|
|
#define A2232INCTL_CHAR 0 /* corresponding byte in InBuf is a character */
|
|
#define A2232INCTL_EVENT 1 /* corresponding byte in InBuf is an event */
|
|
|
|
#define A2232EVENT_Break 1 /* break set */
|
|
#define A2232EVENT_CarrierOn 2 /* carrier raised */
|
|
#define A2232EVENT_CarrierOff 3 /* carrier dropped */
|
|
#define A2232EVENT_Sync 4 /* don't know, defined in 2232.ax */
|
|
|
|
#define A2232CMD_Enable 0x1 /* enable/DTR bit */
|
|
#define A2232CMD_Close 0x2 /* close the device */
|
|
#define A2232CMD_Open 0xb /* open the device */
|
|
#define A2232CMD_CMask 0xf /* command mask */
|
|
#define A2232CMD_RTSOff 0x0 /* turn off RTS */
|
|
#define A2232CMD_RTSOn 0x8 /* turn on RTS */
|
|
#define A2232CMD_Break 0xd /* transmit a break */
|
|
#define A2232CMD_RTSMask 0xc /* mask for RTS stuff */
|
|
#define A2232CMD_NoParity 0x00 /* don't use parity */
|
|
#define A2232CMD_OddParity 0x20 /* odd parity */
|
|
#define A2232CMD_EvenParity 0x60 /* even parity */
|
|
#define A2232CMD_ParityMask 0xe0 /* parity mask */
|
|
|
|
#define A2232PARAM_B115200 0x0 /* baud rates */
|
|
#define A2232PARAM_B50 0x1
|
|
#define A2232PARAM_B75 0x2
|
|
#define A2232PARAM_B110 0x3
|
|
#define A2232PARAM_B134 0x4
|
|
#define A2232PARAM_B150 0x5
|
|
#define A2232PARAM_B300 0x6
|
|
#define A2232PARAM_B600 0x7
|
|
#define A2232PARAM_B1200 0x8
|
|
#define A2232PARAM_B1800 0x9
|
|
#define A2232PARAM_B2400 0xa
|
|
#define A2232PARAM_B3600 0xb
|
|
#define A2232PARAM_B4800 0xc
|
|
#define A2232PARAM_B7200 0xd
|
|
#define A2232PARAM_B9600 0xe
|
|
#define A2232PARAM_B19200 0xf
|
|
#define A2232PARAM_BaudMask 0xf /* baud rate mask */
|
|
#define A2232PARAM_RcvBaud 0x10 /* enable receive baud rate */
|
|
#define A2232PARAM_8Bit 0x00 /* numbers of bits */
|
|
#define A2232PARAM_7Bit 0x20
|
|
#define A2232PARAM_6Bit 0x40
|
|
#define A2232PARAM_5Bit 0x60
|
|
#define A2232PARAM_BitMask 0x60 /* numbers of bits mask */
|
|
|
|
|
|
/* Standard speeds tables, -1 means unavailable, -2 means 0 baud: switch off line */
|
|
#define A2232_BAUD_TABLE_NOAVAIL -1
|
|
#define A2232_BAUD_TABLE_NUM_RATES (18)
|
|
static int a2232_baud_table[A2232_BAUD_TABLE_NUM_RATES*3] = {
|
|
//Baud //Normal //Turbo
|
|
50, A2232PARAM_B50, A2232_BAUD_TABLE_NOAVAIL,
|
|
75, A2232PARAM_B75, A2232_BAUD_TABLE_NOAVAIL,
|
|
110, A2232PARAM_B110, A2232_BAUD_TABLE_NOAVAIL,
|
|
134, A2232PARAM_B134, A2232_BAUD_TABLE_NOAVAIL,
|
|
150, A2232PARAM_B150, A2232PARAM_B75,
|
|
200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL,
|
|
300, A2232PARAM_B300, A2232PARAM_B150,
|
|
600, A2232PARAM_B600, A2232PARAM_B300,
|
|
1200, A2232PARAM_B1200, A2232PARAM_B600,
|
|
1800, A2232PARAM_B1800, A2232_BAUD_TABLE_NOAVAIL,
|
|
2400, A2232PARAM_B2400, A2232PARAM_B1200,
|
|
4800, A2232PARAM_B4800, A2232PARAM_B2400,
|
|
9600, A2232PARAM_B9600, A2232PARAM_B4800,
|
|
19200, A2232PARAM_B19200, A2232PARAM_B9600,
|
|
38400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B19200,
|
|
57600, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL,
|
|
#ifdef A2232_SPEEDHACK
|
|
115200, A2232PARAM_B115200, A2232_BAUD_TABLE_NOAVAIL,
|
|
230400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B115200
|
|
#else
|
|
115200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL,
|
|
230400, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL
|
|
#endif
|
|
};
|
|
#endif
|