openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/s390/char/tape_34xx.c

1345 lines
37 KiB
C
Raw Blame History

/*
* drivers/s390/char/tape_34xx.c
* tape device discipline for 3480/3490 tapes.
*
* Copyright IBM Corp. 2001, 2009
* Author(s): Carsten Otte <cotte@de.ibm.com>
* Tuan Ngo-Anh <ngoanh@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
#define KMSG_COMPONENT "tape_34xx"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bio.h>
#include <linux/workqueue.h>
#define TAPE_DBF_AREA tape_34xx_dbf
#include "tape.h"
#include "tape_std.h"
/*
* Pointer to debug area.
*/
debug_info_t *TAPE_DBF_AREA = NULL;
EXPORT_SYMBOL(TAPE_DBF_AREA);
#define TAPE34XX_FMT_3480 0
#define TAPE34XX_FMT_3480_2_XF 1
#define TAPE34XX_FMT_3480_XF 2
struct tape_34xx_block_id {
unsigned int wrap : 1;
unsigned int segment : 7;
unsigned int format : 2;
unsigned int block : 22;
};
/*
* A list of block ID's is used to faster seek blocks.
*/
struct tape_34xx_sbid {
struct list_head list;
struct tape_34xx_block_id bid;
};
static void tape_34xx_delete_sbid_from(struct tape_device *, int);
/*
* Medium sense for 34xx tapes. There is no 'real' medium sense call.
* So we just do a normal sense.
*/
static int
tape_34xx_medium_sense(struct tape_device *device)
{
struct tape_request *request;
unsigned char *sense;
int rc;
request = tape_alloc_request(1, 32);
if (IS_ERR(request)) {
DBF_EXCEPTION(6, "MSEN fail\n");
return PTR_ERR(request);
}
request->op = TO_MSEN;
tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata);
rc = tape_do_io_interruptible(device, request);
if (request->rc == 0) {
sense = request->cpdata;
/*
* This isn't quite correct. But since INTERVENTION_REQUIRED
* means that the drive is 'neither ready nor on-line' it is
* only slightly inaccurate to say there is no tape loaded if
* the drive isn't online...
*/
if (sense[0] & SENSE_INTERVENTION_REQUIRED)
tape_med_state_set(device, MS_UNLOADED);
else
tape_med_state_set(device, MS_LOADED);
if (sense[1] & SENSE_WRITE_PROTECT)
device->tape_generic_status |= GMT_WR_PROT(~0);
else
device->tape_generic_status &= ~GMT_WR_PROT(~0);
} else {
DBF_EVENT(4, "tape_34xx: medium sense failed with rc=%d\n",
request->rc);
}
tape_free_request(request);
return rc;
}
struct tape_34xx_work {
struct tape_device *device;
enum tape_op op;
struct work_struct work;
};
/*
* These functions are currently used only to schedule a medium_sense for
* later execution. This is because we get an interrupt whenever a medium
* is inserted but cannot call tape_do_io* from an interrupt context.
* Maybe that's useful for other actions we want to start from the
* interrupt handler.
*/
static void
tape_34xx_work_handler(struct work_struct *work)
{
struct tape_34xx_work *p =
container_of(work, struct tape_34xx_work, work);
struct tape_device *device = p->device;
switch(p->op) {
case TO_MSEN:
tape_34xx_medium_sense(device);
break;
default:
DBF_EVENT(3, "T34XX: internal error: unknown work\n");
}
tape_put_device(device);
kfree(p);
}
static int
tape_34xx_schedule_work(struct tape_device *device, enum tape_op op)
{
struct tape_34xx_work *p;
if ((p = kzalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
return -ENOMEM;
INIT_WORK(&p->work, tape_34xx_work_handler);
p->device = tape_get_device(device);
p->op = op;
schedule_work(&p->work);
return 0;
}
/*
* Done Handler is called when dev stat = DEVICE-END (successful operation)
*/
static inline int
tape_34xx_done(struct tape_request *request)
{
DBF_EVENT(6, "%s done\n", tape_op_verbose[request->op]);
switch (request->op) {
case TO_DSE:
case TO_RUN:
case TO_WRI:
case TO_WTM:
case TO_ASSIGN:
case TO_UNASSIGN:
tape_34xx_delete_sbid_from(request->device, 0);
break;
default:
;
}
return TAPE_IO_SUCCESS;
}
static inline int
tape_34xx_erp_failed(struct tape_request *request, int rc)
{
DBF_EVENT(3, "Error recovery failed for %s (RC=%d)\n",
tape_op_verbose[request->op], rc);
return rc;
}
static inline int
tape_34xx_erp_succeeded(struct tape_request *request)
{
DBF_EVENT(3, "Error Recovery successful for %s\n",
tape_op_verbose[request->op]);
return tape_34xx_done(request);
}
static inline int
tape_34xx_erp_retry(struct tape_request *request)
{
DBF_EVENT(3, "xerp retr %s\n", tape_op_verbose[request->op]);
return TAPE_IO_RETRY;
}
/*
* This function is called, when no request is outstanding and we get an
* interrupt
*/
static int
tape_34xx_unsolicited_irq(struct tape_device *device, struct irb *irb)
{
if (irb->scsw.cmd.dstat == 0x85) { /* READY */
/* A medium was inserted in the drive. */
DBF_EVENT(6, "xuud med\n");
tape_34xx_delete_sbid_from(device, 0);
tape_34xx_schedule_work(device, TO_MSEN);
} else {
DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
tape_dump_sense_dbf(device, NULL, irb);
}
return TAPE_IO_SUCCESS;
}
/*
* Read Opposite Error Recovery Function:
* Used, when Read Forward does not work
*/
static int
tape_34xx_erp_read_opposite(struct tape_device *device,
struct tape_request *request)
{
if (request->op == TO_RFO) {
/*
* We did read forward, but the data could not be read
* *correctly*. We transform the request to a read backward
* and try again.
*/
tape_std_read_backward(device, request);
return tape_34xx_erp_retry(request);
}
/*
* We tried to read forward and backward, but hat no
* success -> failed.
*/
return tape_34xx_erp_failed(request, -EIO);
}
static int
tape_34xx_erp_bug(struct tape_device *device, struct tape_request *request,
struct irb *irb, int no)
{
if (request->op != TO_ASSIGN) {
dev_err(&device->cdev->dev, "An unexpected condition %d "
"occurred in tape error recovery\n", no);
tape_dump_sense_dbf(device, request, irb);
}
return tape_34xx_erp_failed(request, -EIO);
}
/*
* Handle data overrun between cu and drive. The channel speed might
* be too slow.
*/
static int
tape_34xx_erp_overrun(struct tape_device *device, struct tape_request *request,
struct irb *irb)
{
if (irb->ecw[3] == 0x40) {
dev_warn (&device->cdev->dev, "A data overrun occurred between"
" the control unit and tape unit\n");
return tape_34xx_erp_failed(request, -EIO);
}
return tape_34xx_erp_bug(device, request, irb, -1);
}
/*
* Handle record sequence error.
*/
static int
tape_34xx_erp_sequence(struct tape_device *device,
struct tape_request *request, struct irb *irb)
{
if (irb->ecw[3] == 0x41) {
/*
* cu detected incorrect block-id sequence on tape.
*/
dev_warn (&device->cdev->dev, "The block ID sequence on the "
"tape is incorrect\n");
return tape_34xx_erp_failed(request, -EIO);
}
/*
* Record sequence error bit is set, but erpa does not
* show record sequence error.
*/
return tape_34xx_erp_bug(device, request, irb, -2);
}
/*
* This function analyses the tape's sense-data in case of a unit-check.
* If possible, it tries to recover from the error. Else the user is
* informed about the problem.
*/
static int
tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
struct irb *irb)
{
int inhibit_cu_recovery;
__u8* sense;
inhibit_cu_recovery = (*device->modeset_byte & 0x80) ? 1 : 0;
sense = irb->ecw;
#ifdef CONFIG_S390_TAPE_BLOCK
if (request->op == TO_BLOCK) {
/*
* Recovery for block device requests. Set the block_position
* to something invalid and retry.
*/
device->blk_data.block_position = -1;
if (request->retries-- <= 0)
return tape_34xx_erp_failed(request, -EIO);
else
return tape_34xx_erp_retry(request);
}
#endif
if (
sense[0] & SENSE_COMMAND_REJECT &&
sense[1] & SENSE_WRITE_PROTECT
) {
if (
request->op == TO_DSE ||
request->op == TO_WRI ||
request->op == TO_WTM
) {
/* medium is write protected */
return tape_34xx_erp_failed(request, -EACCES);
} else {
return tape_34xx_erp_bug(device, request, irb, -3);
}
}
/*
* Special cases for various tape-states when reaching
* end of recorded area
*
* FIXME: Maybe a special case of the special case:
* sense[0] == SENSE_EQUIPMENT_CHECK &&
* sense[1] == SENSE_DRIVE_ONLINE &&
* sense[3] == 0x47 (Volume Fenced)
*
* This was caused by continued FSF or FSR after an
* 'End Of Data'.
*/
if ((
sense[0] == SENSE_DATA_CHECK ||
sense[0] == SENSE_EQUIPMENT_CHECK ||
sense[0] == SENSE_EQUIPMENT_CHECK + SENSE_DEFERRED_UNIT_CHECK
) && (
sense[1] == SENSE_DRIVE_ONLINE ||
sense[1] == SENSE_BEGINNING_OF_TAPE + SENSE_WRITE_MODE
)) {
switch (request->op) {
/*
* sense[0] == SENSE_DATA_CHECK &&
* sense[1] == SENSE_DRIVE_ONLINE
* sense[3] == 0x36 (End Of Data)
*
* Further seeks might return a 'Volume Fenced'.
*/
case TO_FSF:
case TO_FSB:
/* Trying to seek beyond end of recorded area */
return tape_34xx_erp_failed(request, -ENOSPC);
case TO_BSB:
return tape_34xx_erp_retry(request);
/*
* sense[0] == SENSE_DATA_CHECK &&
* sense[1] == SENSE_DRIVE_ONLINE &&
* sense[3] == 0x36 (End Of Data)
*/
case TO_LBL:
/* Block could not be located. */
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case TO_RFO:
/* Read beyond end of recorded area -> 0 bytes read */
return tape_34xx_erp_failed(request, 0);
/*
* sense[0] == SENSE_EQUIPMENT_CHECK &&
* sense[1] == SENSE_DRIVE_ONLINE &&
* sense[3] == 0x38 (Physical End Of Volume)
*/
case TO_WRI:
/* Writing at physical end of volume */
return tape_34xx_erp_failed(request, -ENOSPC);
default:
return tape_34xx_erp_failed(request, 0);
}
}
/* Sensing special bits */
if (sense[0] & SENSE_BUS_OUT_CHECK)
return tape_34xx_erp_retry(request);
if (sense[0] & SENSE_DATA_CHECK) {
/*
* hardware failure, damaged tape or improper
* operating conditions
*/
switch (sense[3]) {
case 0x23:
/* a read data check occurred */
if ((sense[2] & SENSE_TAPE_SYNC_MODE) ||
inhibit_cu_recovery)
// data check is not permanent, may be
// recovered. We always use async-mode with
// cu-recovery, so this should *never* happen.
return tape_34xx_erp_bug(device, request,
irb, -4);
/* data check is permanent, CU recovery has failed */
dev_warn (&device->cdev->dev, "A read error occurred "
"that cannot be recovered\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x25:
// a write data check occurred
if ((sense[2] & SENSE_TAPE_SYNC_MODE) ||
inhibit_cu_recovery)
// data check is not permanent, may be
// recovered. We always use async-mode with
// cu-recovery, so this should *never* happen.
return tape_34xx_erp_bug(device, request,
irb, -5);
// data check is permanent, cu-recovery has failed
dev_warn (&device->cdev->dev, "A write error on the "
"tape cannot be recovered\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x26:
/* Data Check (read opposite) occurred. */
return tape_34xx_erp_read_opposite(device, request);
case 0x28:
/* ID-Mark at tape start couldn't be written */
dev_warn (&device->cdev->dev, "Writing the ID-mark "
"failed\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x31:
/* Tape void. Tried to read beyond end of device. */
dev_warn (&device->cdev->dev, "Reading the tape beyond"
" the end of the recorded area failed\n");
return tape_34xx_erp_failed(request, -ENOSPC);
case 0x41:
/* Record sequence error. */
dev_warn (&device->cdev->dev, "The tape contains an "
"incorrect block ID sequence\n");
return tape_34xx_erp_failed(request, -EIO);
default:
/* all data checks for 3480 should result in one of
* the above erpa-codes. For 3490, other data-check
* conditions do exist. */
if (device->cdev->id.driver_info == tape_3480)
return tape_34xx_erp_bug(device, request,
irb, -6);
}
}
if (sense[0] & SENSE_OVERRUN)
return tape_34xx_erp_overrun(device, request, irb);
if (sense[1] & SENSE_RECORD_SEQUENCE_ERR)
return tape_34xx_erp_sequence(device, request, irb);
/* Sensing erpa codes */
switch (sense[3]) {
case 0x00:
/* Unit check with erpa code 0. Report and ignore. */
return TAPE_IO_SUCCESS;
case 0x21:
/*
* Data streaming not operational. CU will switch to
* interlock mode. Reissue the command.
*/
return tape_34xx_erp_retry(request);
case 0x22:
/*
* Path equipment check. Might be drive adapter error, buffer
* error on the lower interface, internal path not usable,
* or error during cartridge load.
*/
dev_warn (&device->cdev->dev, "A path equipment check occurred"
" for the tape device\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x24:
/*
* Load display check. Load display was command was issued,
* but the drive is displaying a drive check message. Can
* be threated as "device end".
*/
return tape_34xx_erp_succeeded(request);
case 0x27:
/*
* Command reject. May indicate illegal channel program or
* buffer over/underrun. Since all channel programs are
* issued by this driver and ought be correct, we assume a
* over/underrun situation and retry the channel program.
*/
return tape_34xx_erp_retry(request);
case 0x29:
/*
* Function incompatible. Either the tape is idrc compressed
* but the hardware isn't capable to do idrc, or a perform
* subsystem func is issued and the CU is not on-line.
*/
return tape_34xx_erp_failed(request, -EIO);
case 0x2a:
/*
* Unsolicited environmental data. An internal counter
* overflows, we can ignore this and reissue the cmd.
*/
return tape_34xx_erp_retry(request);
case 0x2b:
/*
* Environmental data present. Indicates either unload
* completed ok or read buffered log command completed ok.
*/
if (request->op == TO_RUN) {
/* Rewind unload completed ok. */
tape_med_state_set(device, MS_UNLOADED);
return tape_34xx_erp_succeeded(request);
}
/* tape_34xx doesn't use read buffered log commands. */
return tape_34xx_erp_bug(device, request, irb, sense[3]);
case 0x2c:
/*
* Permanent equipment check. CU has tried recovery, but
* did not succeed.
*/
return tape_34xx_erp_failed(request, -EIO);
case 0x2d:
/* Data security erase failure. */
if (request->op == TO_DSE)
return tape_34xx_erp_failed(request, -EIO);
/* Data security erase failure, but no such command issued. */
return tape_34xx_erp_bug(device, request, irb, sense[3]);
case 0x2e:
/*
* Not capable. This indicates either that the drive fails
* reading the format id mark or that that format specified
* is not supported by the drive.
*/
dev_warn (&device->cdev->dev, "The tape unit cannot process "
"the tape format\n");
return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
case 0x30:
/* The medium is write protected. */
dev_warn (&device->cdev->dev, "The tape medium is write-"
"protected\n");
return tape_34xx_erp_failed(request, -EACCES);
case 0x32:
// Tension loss. We cannot recover this, it's an I/O error.
dev_warn (&device->cdev->dev, "The tape does not have the "
"required tape tension\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x33:
/*
* Load Failure. The cartridge was not inserted correctly or
* the tape is not threaded correctly.
*/
dev_warn (&device->cdev->dev, "The tape unit failed to load"
" the cartridge\n");
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case 0x34:
/*
* Unload failure. The drive cannot maintain tape tension
* and control tape movement during an unload operation.
*/
dev_warn (&device->cdev->dev, "Automatic unloading of the tape"
" cartridge failed\n");
if (request->op == TO_RUN)
return tape_34xx_erp_failed(request, -EIO);
return tape_34xx_erp_bug(device, request, irb, sense[3]);
case 0x35:
/*
* Drive equipment check. One of the following:
* - cu cannot recover from a drive detected error
* - a check code message is shown on drive display
* - the cartridge loader does not respond correctly
* - a failure occurs during an index, load, or unload cycle
*/
dev_warn (&device->cdev->dev, "An equipment check has occurred"
" on the tape unit\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x36:
if (device->cdev->id.driver_info == tape_3490)
/* End of data. */
return tape_34xx_erp_failed(request, -EIO);
/* This erpa is reserved for 3480 */
return tape_34xx_erp_bug(device, request, irb, sense[3]);
case 0x37:
/*
* Tape length error. The tape is shorter than reported in
* the beginning-of-tape data.
*/
dev_warn (&device->cdev->dev, "The tape information states an"
" incorrect length\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x38:
/*
* Physical end of tape. A read/write operation reached
* the physical end of tape.
*/
if (request->op==TO_WRI ||
request->op==TO_DSE ||
request->op==TO_WTM)
return tape_34xx_erp_failed(request, -ENOSPC);
return tape_34xx_erp_failed(request, -EIO);
case 0x39:
/* Backward at Beginning of tape. */
return tape_34xx_erp_failed(request, -EIO);
case 0x3a:
/* Drive switched to not ready. */
dev_warn (&device->cdev->dev, "The tape unit is not ready\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x3b:
/* Manual rewind or unload. This causes an I/O error. */
dev_warn (&device->cdev->dev, "The tape medium has been "
"rewound or unloaded manually\n");
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case 0x42:
/*
* Degraded mode. A condition that can cause degraded
* performance is detected.
*/
dev_warn (&device->cdev->dev, "The tape subsystem is running "
"in degraded mode\n");
return tape_34xx_erp_retry(request);
case 0x43:
/* Drive not ready. */
tape_34xx_delete_sbid_from(device, 0);
tape_med_state_set(device, MS_UNLOADED);
/* Some commands commands are successful even in this case */
if (sense[1] & SENSE_DRIVE_ONLINE) {
switch(request->op) {
case TO_ASSIGN:
case TO_UNASSIGN:
case TO_DIS:
case TO_NOP:
return tape_34xx_done(request);
break;
default:
break;
}
}
return tape_34xx_erp_failed(request, -ENOMEDIUM);
case 0x44:
/* Locate Block unsuccessful. */
if (request->op != TO_BLOCK && request->op != TO_LBL)
/* No locate block was issued. */
return tape_34xx_erp_bug(device, request,
irb, sense[3]);
return tape_34xx_erp_failed(request, -EIO);
case 0x45:
/* The drive is assigned to a different channel path. */
dev_warn (&device->cdev->dev, "The tape unit is already "
"assigned\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x46:
/*
* Drive not on-line. Drive may be switched offline,
* the power supply may be switched off or
* the drive address may not be set correctly.
*/
dev_warn (&device->cdev->dev, "The tape unit is not online\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x47:
/* Volume fenced. CU reports volume integrity is lost. */
dev_warn (&device->cdev->dev, "The control unit has fenced "
"access to the tape volume\n");
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case 0x48:
/* Log sense data and retry request. */
return tape_34xx_erp_retry(request);
case 0x49:
/* Bus out check. A parity check error on the bus was found. */
dev_warn (&device->cdev->dev, "A parity error occurred on the "
"tape bus\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x4a:
/* Control unit erp failed. */
dev_warn (&device->cdev->dev, "I/O error recovery failed on "
"the tape control unit\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x4b:
/*
* CU and drive incompatible. The drive requests micro-program
* patches, which are not available on the CU.
*/
dev_warn (&device->cdev->dev, "The tape unit requires a "
"firmware update\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x4c:
/*
* Recovered Check-One failure. Cu develops a hardware error,
* but is able to recover.
*/
return tape_34xx_erp_retry(request);
case 0x4d:
if (device->cdev->id.driver_info == tape_3490)
/*
* Resetting event received. Since the driver does
* not support resetting event recovery (which has to
* be handled by the I/O Layer), retry our command.
*/
return tape_34xx_erp_retry(request);
/* This erpa is reserved for 3480. */
return tape_34xx_erp_bug(device, request, irb, sense[3]);
case 0x4e:
if (device->cdev->id.driver_info == tape_3490) {
/*
* Maximum block size exceeded. This indicates, that
* the block to be written is larger than allowed for
* buffered mode.
*/
dev_warn (&device->cdev->dev, "The maximum block size"
" for buffered mode is exceeded\n");
return tape_34xx_erp_failed(request, -ENOBUFS);
}
/* This erpa is reserved for 3480. */
return tape_34xx_erp_bug(device, request, irb, sense[3]);
case 0x50:
/*
* Read buffered log (Overflow). CU is running in extended
* buffered log mode, and a counter overflows. This should
* never happen, since we're never running in extended
* buffered log mode.
*/
return tape_34xx_erp_retry(request);
case 0x51:
/*
* Read buffered log (EOV). EOF processing occurs while the
* CU is in extended buffered log mode. This should never
* happen, since we're never running in extended buffered
* log mode.
*/
return tape_34xx_erp_retry(request);
case 0x52:
/* End of Volume complete. Rewind unload completed ok. */
if (request->op == TO_RUN) {
tape_med_state_set(device, MS_UNLOADED);
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_succeeded(request);
}
return tape_34xx_erp_bug(device, request, irb, sense[3]);
case 0x53:
/* Global command intercept. */
return tape_34xx_erp_retry(request);
case 0x54:
/* Channel interface recovery (temporary). */
return tape_34xx_erp_retry(request);
case 0x55:
/* Channel interface recovery (permanent). */
dev_warn (&device->cdev->dev, "A channel interface error cannot be"
" recovered\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x56:
/* Channel protocol error. */
dev_warn (&device->cdev->dev, "A channel protocol error "
"occurred\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x57:
if (device->cdev->id.driver_info == tape_3480) {
/* Attention intercept. */
return tape_34xx_erp_retry(request);
} else {
/* Global status intercept. */
return tape_34xx_erp_retry(request);
}
case 0x5a:
/*
* Tape length incompatible. The tape inserted is too long,
* which could cause damage to the tape or the drive.
*/
dev_warn (&device->cdev->dev, "The tape unit does not support "
"the tape length\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x5b:
/* Format 3480 XF incompatible */
if (sense[1] & SENSE_BEGINNING_OF_TAPE)
/* The tape will get overwritten. */
return tape_34xx_erp_retry(request);
dev_warn (&device->cdev->dev, "The tape unit does not support"
" format 3480 XF\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x5c:
/* Format 3480-2 XF incompatible */
dev_warn (&device->cdev->dev, "The tape unit does not support tape "
"format 3480-2 XF\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x5d:
/* Tape length violation. */
dev_warn (&device->cdev->dev, "The tape unit does not support"
" the current tape length\n");
return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
case 0x5e:
/* Compaction algorithm incompatible. */
dev_warn (&device->cdev->dev, "The tape unit does not support"
" the compaction algorithm\n");
return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
/* The following erpas should have been covered earlier. */
case 0x23: /* Read data check. */
case 0x25: /* Write data check. */
case 0x26: /* Data check (read opposite). */
case 0x28: /* Write id mark check. */
case 0x31: /* Tape void. */
case 0x40: /* Overrun error. */
case 0x41: /* Record sequence error. */
/* All other erpas are reserved for future use. */
default:
return tape_34xx_erp_bug(device, request, irb, sense[3]);
}
}
/*
* 3480/3490 interrupt handler
*/
static int
tape_34xx_irq(struct tape_device *device, struct tape_request *request,
struct irb *irb)
{
if (request == NULL)
return tape_34xx_unsolicited_irq(device, irb);
if ((irb->scsw.cmd.dstat & DEV_STAT_UNIT_EXCEP) &&
(irb->scsw.cmd.dstat & DEV_STAT_DEV_END) &&
(request->op == TO_WRI)) {
/* Write at end of volume */
return tape_34xx_erp_failed(request, -ENOSPC);
}
if (irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK)
return tape_34xx_unit_check(device, request, irb);
if (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) {
/*
* A unit exception occurs on skipping over a tapemark block.
*/
if (irb->scsw.cmd.dstat & DEV_STAT_UNIT_EXCEP) {
if (request->op == TO_BSB || request->op == TO_FSB)
request->rescnt++;
else
DBF_EVENT(5, "Unit Exception!\n");
}
return tape_34xx_done(request);
}
DBF_EVENT(6, "xunknownirq\n");
tape_dump_sense_dbf(device, request, irb);
return TAPE_IO_STOP;
}
/*
* ioctl_overload
*/
static int
tape_34xx_ioctl(struct tape_device *device, unsigned int cmd, unsigned long arg)
{
if (cmd == TAPE390_DISPLAY) {
struct display_struct disp;
if (copy_from_user(&disp, (char __user *) arg, sizeof(disp)) != 0)
return -EFAULT;
return tape_std_display(device, &disp);
} else
return -EINVAL;
}
static inline void
tape_34xx_append_new_sbid(struct tape_34xx_block_id bid, struct list_head *l)
{
struct tape_34xx_sbid * new_sbid;
new_sbid = kmalloc(sizeof(*new_sbid), GFP_ATOMIC);
if (!new_sbid)
return;
new_sbid->bid = bid;
list_add(&new_sbid->list, l);
}
/*
* Build up the search block ID list. The block ID consists of a logical
* block number and a hardware specific part. The hardware specific part
* helps the tape drive to speed up searching for a specific block.
*/
static void
tape_34xx_add_sbid(struct tape_device *device, struct tape_34xx_block_id bid)
{
struct list_head * sbid_list;
struct tape_34xx_sbid * sbid;
struct list_head * l;
/*
* immediately return if there is no list at all or the block to add
* is located in segment 1 of wrap 0 because this position is used
* if no hardware position data is supplied.
*/
sbid_list = (struct list_head *) device->discdata;
if (!sbid_list || (bid.segment < 2 && bid.wrap == 0))
return;
/*
* Search the position where to insert the new entry. Hardware
* acceleration uses only the segment and wrap number. So we
* need only one entry for a specific wrap/segment combination.
* If there is a block with a lower number but the same hard-
* ware position data we just update the block number in the
* existing entry.
*/
list_for_each(l, sbid_list) {
sbid = list_entry(l, struct tape_34xx_sbid, list);
if (
(sbid->bid.segment == bid.segment) &&
(sbid->bid.wrap == bid.wrap)
) {
if (bid.block < sbid->bid.block)
sbid->bid = bid;
else return;
break;
}
/* Sort in according to logical block number. */
if (bid.block < sbid->bid.block) {
tape_34xx_append_new_sbid(bid, l->prev);
break;
}
}
/* List empty or new block bigger than last entry. */
if (l == sbid_list)
tape_34xx_append_new_sbid(bid, l->prev);
DBF_LH(4, "Current list is:\n");
list_for_each(l, sbid_list) {
sbid = list_entry(l, struct tape_34xx_sbid, list);
DBF_LH(4, "%d:%03d@%05d\n",
sbid->bid.wrap,
sbid->bid.segment,
sbid->bid.block
);
}
}
/*
* Delete all entries from the search block ID list that belong to tape blocks
* equal or higher than the given number.
*/
static void
tape_34xx_delete_sbid_from(struct tape_device *device, int from)
{
struct list_head * sbid_list;
struct tape_34xx_sbid * sbid;
struct list_head * l;
struct list_head * n;
sbid_list = (struct list_head *) device->discdata;
if (!sbid_list)
return;
list_for_each_safe(l, n, sbid_list) {
sbid = list_entry(l, struct tape_34xx_sbid, list);
if (sbid->bid.block >= from) {
DBF_LH(4, "Delete sbid %d:%03d@%05d\n",
sbid->bid.wrap,
sbid->bid.segment,
sbid->bid.block
);
list_del(l);
kfree(sbid);
}
}
}
/*
* Merge hardware position data into a block id.
*/
static void
tape_34xx_merge_sbid(
struct tape_device * device,
struct tape_34xx_block_id * bid
) {
struct tape_34xx_sbid * sbid;
struct tape_34xx_sbid * sbid_to_use;
struct list_head * sbid_list;
struct list_head * l;
sbid_list = (struct list_head *) device->discdata;
bid->wrap = 0;
bid->segment = 1;
if (!sbid_list || list_empty(sbid_list))
return;
sbid_to_use = NULL;
list_for_each(l, sbid_list) {
sbid = list_entry(l, struct tape_34xx_sbid, list);
if (sbid->bid.block >= bid->block)
break;
sbid_to_use = sbid;
}
if (sbid_to_use) {
bid->wrap = sbid_to_use->bid.wrap;
bid->segment = sbid_to_use->bid.segment;
DBF_LH(4, "Use %d:%03d@%05d for %05d\n",
sbid_to_use->bid.wrap,
sbid_to_use->bid.segment,
sbid_to_use->bid.block,
bid->block
);
}
}
static int
tape_34xx_setup_device(struct tape_device * device)
{
int rc;
struct list_head * discdata;
DBF_EVENT(6, "34xx device setup\n");
if ((rc = tape_std_assign(device)) == 0) {
if ((rc = tape_34xx_medium_sense(device)) != 0) {
DBF_LH(3, "34xx medium sense returned %d\n", rc);
}
}
discdata = kmalloc(sizeof(struct list_head), GFP_KERNEL);
if (discdata) {
INIT_LIST_HEAD(discdata);
device->discdata = discdata;
}
return rc;
}
static void
tape_34xx_cleanup_device(struct tape_device *device)
{
tape_std_unassign(device);
if (device->discdata) {
tape_34xx_delete_sbid_from(device, 0);
kfree(device->discdata);
device->discdata = NULL;
}
}
/*
* MTTELL: Tell block. Return the number of block relative to current file.
*/
static int
tape_34xx_mttell(struct tape_device *device, int mt_count)
{
struct {
struct tape_34xx_block_id cbid;
struct tape_34xx_block_id dbid;
} __attribute__ ((packed)) block_id;
int rc;
rc = tape_std_read_block_id(device, (__u64 *) &block_id);
if (rc)
return rc;
tape_34xx_add_sbid(device, block_id.cbid);
return block_id.cbid.block;
}
/*
* MTSEEK: seek to the specified block.
*/
static int
tape_34xx_mtseek(struct tape_device *device, int mt_count)
{
struct tape_request *request;
struct tape_34xx_block_id * bid;
if (mt_count > 0x3fffff) {
DBF_EXCEPTION(6, "xsee parm\n");
return -EINVAL;
}
request = tape_alloc_request(3, 4);
if (IS_ERR(request))
return PTR_ERR(request);
/* setup ccws */
request->op = TO_LBL;
bid = (struct tape_34xx_block_id *) request->cpdata;
bid->format = (*device->modeset_byte & 0x08) ?
TAPE34XX_FMT_3480_XF : TAPE34XX_FMT_3480;
bid->block = mt_count;
tape_34xx_merge_sbid(device, bid);
tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
/* execute it */
return tape_do_io_free(device, request);
}
#ifdef CONFIG_S390_TAPE_BLOCK
/*
* Tape block read for 34xx.
*/
static struct tape_request *
tape_34xx_bread(struct tape_device *device, struct request *req)
{
struct tape_request *request;
struct ccw1 *ccw;
int count = 0;
unsigned off;
char *dst;
struct bio_vec *bv;
struct req_iterator iter;
struct tape_34xx_block_id * start_block;
DBF_EVENT(6, "xBREDid:");
/* Count the number of blocks for the request. */
rq_for_each_segment(bv, req, iter)
count += bv->bv_len >> (TAPEBLOCK_HSEC_S2B + 9);
/* Allocate the ccw request. */
request = tape_alloc_request(3+count+1, 8);
if (IS_ERR(request))
return request;
/* Setup ccws. */
request->op = TO_BLOCK;
start_block = (struct tape_34xx_block_id *) request->cpdata;
start_block->block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
DBF_EVENT(6, "start_block = %i\n", start_block->block);
ccw = request->cpaddr;
ccw = tape_ccw_cc(ccw, MODE_SET_DB, 1, device->modeset_byte);
/*
* We always setup a nop after the mode set ccw. This slot is
* used in tape_std_check_locate to insert a locate ccw if the
* current tape position doesn't match the start block to be read.
* The second nop will be filled with a read block id which is in
* turn used by tape_34xx_free_bread to populate the segment bid
* table.
*/
ccw = tape_ccw_cc(ccw, NOP, 0, NULL);
ccw = tape_ccw_cc(ccw, NOP, 0, NULL);
rq_for_each_segment(bv, req, iter) {
dst = kmap(bv->bv_page) + bv->bv_offset;
for (off = 0; off < bv->bv_len; off += TAPEBLOCK_HSEC_SIZE) {
ccw->flags = CCW_FLAG_CC;
ccw->cmd_code = READ_FORWARD;
ccw->count = TAPEBLOCK_HSEC_SIZE;
set_normalized_cda(ccw, (void*) __pa(dst));
ccw++;
dst += TAPEBLOCK_HSEC_SIZE;
}
}
ccw = tape_ccw_end(ccw, NOP, 0, NULL);
DBF_EVENT(6, "xBREDccwg\n");
return request;
}
static void
tape_34xx_free_bread (struct tape_request *request)
{
struct ccw1* ccw;
ccw = request->cpaddr;
if ((ccw + 2)->cmd_code == READ_BLOCK_ID) {
struct {
struct tape_34xx_block_id cbid;
struct tape_34xx_block_id dbid;
} __attribute__ ((packed)) *rbi_data;
rbi_data = request->cpdata;
if (request->device)
tape_34xx_add_sbid(request->device, rbi_data->cbid);
}
/* Last ccw is a nop and doesn't need clear_normalized_cda */
for (; ccw->flags & CCW_FLAG_CC; ccw++)
if (ccw->cmd_code == READ_FORWARD)
clear_normalized_cda(ccw);
tape_free_request(request);
}
/*
* check_locate is called just before the tape request is passed to
* the common io layer for execution. It has to check the current
* tape position and insert a locate ccw if it doesn't match the
* start block for the request.
*/
static void
tape_34xx_check_locate(struct tape_device *device, struct tape_request *request)
{
struct tape_34xx_block_id * start_block;
start_block = (struct tape_34xx_block_id *) request->cpdata;
if (start_block->block == device->blk_data.block_position)
return;
DBF_LH(4, "Block seek(%06d+%06d)\n", start_block->block, device->bof);
start_block->wrap = 0;
start_block->segment = 1;
start_block->format = (*device->modeset_byte & 0x08) ?
TAPE34XX_FMT_3480_XF :
TAPE34XX_FMT_3480;
start_block->block = start_block->block + device->bof;
tape_34xx_merge_sbid(device, start_block);
tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
tape_ccw_cc(request->cpaddr + 2, READ_BLOCK_ID, 8, request->cpdata);
}
#endif
/*
* List of 3480/3490 magnetic tape commands.
*/
static tape_mtop_fn tape_34xx_mtop[TAPE_NR_MTOPS] = {
[MTRESET] = tape_std_mtreset,
[MTFSF] = tape_std_mtfsf,
[MTBSF] = tape_std_mtbsf,
[MTFSR] = tape_std_mtfsr,
[MTBSR] = tape_std_mtbsr,
[MTWEOF] = tape_std_mtweof,
[MTREW] = tape_std_mtrew,
[MTOFFL] = tape_std_mtoffl,
[MTNOP] = tape_std_mtnop,
[MTRETEN] = tape_std_mtreten,
[MTBSFM] = tape_std_mtbsfm,
[MTFSFM] = tape_std_mtfsfm,
[MTEOM] = tape_std_mteom,
[MTERASE] = tape_std_mterase,
[MTRAS1] = NULL,
[MTRAS2] = NULL,
[MTRAS3] = NULL,
[MTSETBLK] = tape_std_mtsetblk,
[MTSETDENSITY] = NULL,
[MTSEEK] = tape_34xx_mtseek,
[MTTELL] = tape_34xx_mttell,
[MTSETDRVBUFFER] = NULL,
[MTFSS] = NULL,
[MTBSS] = NULL,
[MTWSM] = NULL,
[MTLOCK] = NULL,
[MTUNLOCK] = NULL,
[MTLOAD] = tape_std_mtload,
[MTUNLOAD] = tape_std_mtunload,
[MTCOMPRESSION] = tape_std_mtcompression,
[MTSETPART] = NULL,
[MTMKPART] = NULL
};
/*
* Tape discipline structure for 3480 and 3490.
*/
static struct tape_discipline tape_discipline_34xx = {
.owner = THIS_MODULE,
.setup_device = tape_34xx_setup_device,
.cleanup_device = tape_34xx_cleanup_device,
.process_eov = tape_std_process_eov,
.irq = tape_34xx_irq,
.read_block = tape_std_read_block,
.write_block = tape_std_write_block,
#ifdef CONFIG_S390_TAPE_BLOCK
.bread = tape_34xx_bread,
.free_bread = tape_34xx_free_bread,
.check_locate = tape_34xx_check_locate,
#endif
.ioctl_fn = tape_34xx_ioctl,
.mtop_array = tape_34xx_mtop
};
static struct ccw_device_id tape_34xx_ids[] = {
{ CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), .driver_info = tape_3480},
{ CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), .driver_info = tape_3490},
{ /* end of list */ },
};
static int
tape_34xx_online(struct ccw_device *cdev)
{
return tape_generic_online(
dev_get_drvdata(&cdev->dev),
&tape_discipline_34xx
);
}
static struct ccw_driver tape_34xx_driver = {
.name = "tape_34xx",
.owner = THIS_MODULE,
.ids = tape_34xx_ids,
.probe = tape_generic_probe,
.remove = tape_generic_remove,
.set_online = tape_34xx_online,
.set_offline = tape_generic_offline,
.freeze = tape_generic_pm_suspend,
};
static int
tape_34xx_init (void)
{
int rc;
TAPE_DBF_AREA = debug_register ( "tape_34xx", 2, 2, 4*sizeof(long));
debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view);
#ifdef DBF_LIKE_HELL
debug_set_level(TAPE_DBF_AREA, 6);
#endif
DBF_EVENT(3, "34xx init\n");
/* Register driver for 3480/3490 tapes. */
rc = ccw_driver_register(&tape_34xx_driver);
if (rc)
DBF_EVENT(3, "34xx init failed\n");
else
DBF_EVENT(3, "34xx registered\n");
return rc;
}
static void
tape_34xx_exit(void)
{
ccw_driver_unregister(&tape_34xx_driver);
debug_unregister(TAPE_DBF_AREA);
}
MODULE_DEVICE_TABLE(ccw, tape_34xx_ids);
MODULE_AUTHOR("(C) 2001-2002 IBM Deutschland Entwicklung GmbH");
MODULE_DESCRIPTION("Linux on zSeries channel attached 3480 tape device driver");
MODULE_LICENSE("GPL");
module_init(tape_34xx_init);
module_exit(tape_34xx_exit);
Reference in New Issue View Git Blame Copy Permalink