mirror of https://gitee.com/openkylin/linux.git
f9652d5cae
The names of the idle states in the output of cpupower monitor command are
truncated to 4 characters. On POWER9, this creates ambiguity as the states
are named "stop0", "stop1", etc.
root:~# cpupower monitor
|Idle_Stats
PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop
0| 0| 0| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 1.90
0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
This patch modifies the output to print the state name that results in a
legible output. The names will be printed with atmost 1 padding in left.
root:~# cpupower monitor
| Idle_Stats
PKG|CORE| CPU|snooze|stop0L| stop0|stop1L| stop1|stop2L| stop2
0| 0| 0| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.72
0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00
This patch does not affect the output for intel.
Output for intel before applying the patch:
root:~# cpupower monitor
|Idle_Stats
CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S | C9-S | C10-
0| 0.00| 0.14| 0.39| 0.35| 7.41| 0.00| 17.67| 1.01| 70.03
2| 0.00| 0.19| 0.47| 0.10| 6.50| 0.00| 29.66| 2.17| 58.07
1| 0.00| 0.11| 0.50| 1.50| 9.11| 0.18| 18.19| 0.40| 66.63
3| 0.00| 0.67| 0.42| 0.03| 5.84| 0.00| 12.58| 0.77| 77.14
Output for intel after applying the patch:
root:~# cpupower monitor
| Idle_Stats
CPU| POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S | C9-S | C10-
0| 0.03| 0.33| 1.01| 0.27| 3.03| 0.00| 19.18| 0.00| 71.24
2| 0.00| 1.58| 0.58| 0.42| 8.55| 0.09| 21.11| 0.99| 63.32
1| 0.00| 1.26| 0.88| 0.43| 9.00| 0.02| 7.78| 4.65| 71.91
3| 0.00| 0.30| 0.42| 0.06| 13.62| 0.21| 30.29| 0.00| 52.45
Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
||
|---|---|---|
| .. | ||
| bench | ||
| debug | ||
| lib | ||
| man | ||
| po | ||
| utils | ||
| .gitignore | ||
| Makefile | ||
| README | ||
| ToDo | ||
README
The cpupower package consists of the following elements:
requirements
------------
On x86 pciutils is needed at runtime (-lpci).
For compilation pciutils-devel (pci/pci.h) and a gcc version
providing cpuid.h is needed.
For both it's not explicitly checked for (yet).
libcpupower
----------
"libcpupower" is a library which offers a unified access method for userspace
tools and programs to the cpufreq core and drivers in the Linux kernel. This
allows for code reduction in userspace tools, a clean implementation of
the interaction to the cpufreq core, and support for both the sysfs and proc
interfaces [depending on configuration, see below].
compilation and installation
----------------------------
make
su
make install
should suffice on most systems. It builds libcpupower to put in
/usr/lib; cpupower, cpufreq-bench_plot.sh to put in /usr/bin; and
cpufreq-bench to put in /usr/sbin. If you want to set up the paths
differently and/or want to configure the package to your specific
needs, you need to open "Makefile" with an editor of your choice and
edit the block marked CONFIGURATION.
THANKS
------
Many thanks to Mattia Dongili who wrote the autotoolization and
libtoolization, the manpages and the italian language file for cpupower;
to Dave Jones for his feedback and his dump_psb tool; to Bruno Ducrot for his
powernow-k8-decode and intel_gsic tools as well as the french language file;
and to various others commenting on the previous (pre-)releases of
cpupower.
Dominik Brodowski