mirror of https://gitee.com/openkylin/linux.git
3657 lines
103 KiB
C
3657 lines
103 KiB
C
/*
|
|
* file_storage.c -- File-backed USB Storage Gadget, for USB development
|
|
*
|
|
* Copyright (C) 2003-2008 Alan Stern
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The names of the above-listed copyright holders may not be used
|
|
* to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") as published by the Free Software
|
|
* Foundation, either version 2 of that License or (at your option) any
|
|
* later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
|
|
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
|
|
/*
|
|
* The File-backed Storage Gadget acts as a USB Mass Storage device,
|
|
* appearing to the host as a disk drive or as a CD-ROM drive. In addition
|
|
* to providing an example of a genuinely useful gadget driver for a USB
|
|
* device, it also illustrates a technique of double-buffering for increased
|
|
* throughput. Last but not least, it gives an easy way to probe the
|
|
* behavior of the Mass Storage drivers in a USB host.
|
|
*
|
|
* Backing storage is provided by a regular file or a block device, specified
|
|
* by the "file" module parameter. Access can be limited to read-only by
|
|
* setting the optional "ro" module parameter. (For CD-ROM emulation,
|
|
* access is always read-only.) The gadget will indicate that it has
|
|
* removable media if the optional "removable" module parameter is set.
|
|
*
|
|
* The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI),
|
|
* and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected
|
|
* by the optional "transport" module parameter. It also supports the
|
|
* following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
|
|
* UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
|
|
* the optional "protocol" module parameter. In addition, the default
|
|
* Vendor ID, Product ID, release number and serial number can be overridden.
|
|
*
|
|
* There is support for multiple logical units (LUNs), each of which has
|
|
* its own backing file. The number of LUNs can be set using the optional
|
|
* "luns" module parameter (anywhere from 1 to 8), and the corresponding
|
|
* files are specified using comma-separated lists for "file" and "ro".
|
|
* The default number of LUNs is taken from the number of "file" elements;
|
|
* it is 1 if "file" is not given. If "removable" is not set then a backing
|
|
* file must be specified for each LUN. If it is set, then an unspecified
|
|
* or empty backing filename means the LUN's medium is not loaded. Ideally
|
|
* each LUN would be settable independently as a disk drive or a CD-ROM
|
|
* drive, but currently all LUNs have to be the same type. The CD-ROM
|
|
* emulation includes a single data track and no audio tracks; hence there
|
|
* need be only one backing file per LUN.
|
|
*
|
|
* Requirements are modest; only a bulk-in and a bulk-out endpoint are
|
|
* needed (an interrupt-out endpoint is also needed for CBI). The memory
|
|
* requirement amounts to two 16K buffers, size configurable by a parameter.
|
|
* Support is included for both full-speed and high-speed operation.
|
|
*
|
|
* Note that the driver is slightly non-portable in that it assumes a
|
|
* single memory/DMA buffer will be useable for bulk-in, bulk-out, and
|
|
* interrupt-in endpoints. With most device controllers this isn't an
|
|
* issue, but there may be some with hardware restrictions that prevent
|
|
* a buffer from being used by more than one endpoint.
|
|
*
|
|
* Module options:
|
|
*
|
|
* file=filename[,filename...]
|
|
* Required if "removable" is not set, names of
|
|
* the files or block devices used for
|
|
* backing storage
|
|
* serial=HHHH... Required serial number (string of hex chars)
|
|
* ro=b[,b...] Default false, booleans for read-only access
|
|
* removable Default false, boolean for removable media
|
|
* luns=N Default N = number of filenames, number of
|
|
* LUNs to support
|
|
* nofua=b[,b...] Default false, booleans for ignore FUA flag
|
|
* in SCSI WRITE(10,12) commands
|
|
* stall Default determined according to the type of
|
|
* USB device controller (usually true),
|
|
* boolean to permit the driver to halt
|
|
* bulk endpoints
|
|
* cdrom Default false, boolean for whether to emulate
|
|
* a CD-ROM drive
|
|
* transport=XXX Default BBB, transport name (CB, CBI, or BBB)
|
|
* protocol=YYY Default SCSI, protocol name (RBC, 8020 or
|
|
* ATAPI, QIC, UFI, 8070, or SCSI;
|
|
* also 1 - 6)
|
|
* vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID
|
|
* product=0xPPPP Default 0xa4a5 (FSG), USB Product ID
|
|
* release=0xRRRR Override the USB release number (bcdDevice)
|
|
* buflen=N Default N=16384, buffer size used (will be
|
|
* rounded down to a multiple of
|
|
* PAGE_CACHE_SIZE)
|
|
*
|
|
* If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro",
|
|
* "removable", "luns", "nofua", "stall", and "cdrom" options are available;
|
|
* default values are used for everything else.
|
|
*
|
|
* The pathnames of the backing files and the ro settings are available in
|
|
* the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
|
|
* the gadget's sysfs directory. If the "removable" option is set, writing to
|
|
* these files will simulate ejecting/loading the medium (writing an empty
|
|
* line means eject) and adjusting a write-enable tab. Changes to the ro
|
|
* setting are not allowed when the medium is loaded or if CD-ROM emulation
|
|
* is being used.
|
|
*
|
|
* This gadget driver is heavily based on "Gadget Zero" by David Brownell.
|
|
* The driver's SCSI command interface was based on the "Information
|
|
* technology - Small Computer System Interface - 2" document from
|
|
* X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
|
|
* <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception
|
|
* is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
|
|
* "Universal Serial Bus Mass Storage Class UFI Command Specification"
|
|
* document, Revision 1.0, December 14, 1998, available at
|
|
* <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
|
|
*/
|
|
|
|
|
|
/*
|
|
* Driver Design
|
|
*
|
|
* The FSG driver is fairly straightforward. There is a main kernel
|
|
* thread that handles most of the work. Interrupt routines field
|
|
* callbacks from the controller driver: bulk- and interrupt-request
|
|
* completion notifications, endpoint-0 events, and disconnect events.
|
|
* Completion events are passed to the main thread by wakeup calls. Many
|
|
* ep0 requests are handled at interrupt time, but SetInterface,
|
|
* SetConfiguration, and device reset requests are forwarded to the
|
|
* thread in the form of "exceptions" using SIGUSR1 signals (since they
|
|
* should interrupt any ongoing file I/O operations).
|
|
*
|
|
* The thread's main routine implements the standard command/data/status
|
|
* parts of a SCSI interaction. It and its subroutines are full of tests
|
|
* for pending signals/exceptions -- all this polling is necessary since
|
|
* the kernel has no setjmp/longjmp equivalents. (Maybe this is an
|
|
* indication that the driver really wants to be running in userspace.)
|
|
* An important point is that so long as the thread is alive it keeps an
|
|
* open reference to the backing file. This will prevent unmounting
|
|
* the backing file's underlying filesystem and could cause problems
|
|
* during system shutdown, for example. To prevent such problems, the
|
|
* thread catches INT, TERM, and KILL signals and converts them into
|
|
* an EXIT exception.
|
|
*
|
|
* In normal operation the main thread is started during the gadget's
|
|
* fsg_bind() callback and stopped during fsg_unbind(). But it can also
|
|
* exit when it receives a signal, and there's no point leaving the
|
|
* gadget running when the thread is dead. So just before the thread
|
|
* exits, it deregisters the gadget driver. This makes things a little
|
|
* tricky: The driver is deregistered at two places, and the exiting
|
|
* thread can indirectly call fsg_unbind() which in turn can tell the
|
|
* thread to exit. The first problem is resolved through the use of the
|
|
* REGISTERED atomic bitflag; the driver will only be deregistered once.
|
|
* The second problem is resolved by having fsg_unbind() check
|
|
* fsg->state; it won't try to stop the thread if the state is already
|
|
* FSG_STATE_TERMINATED.
|
|
*
|
|
* To provide maximum throughput, the driver uses a circular pipeline of
|
|
* buffer heads (struct fsg_buffhd). In principle the pipeline can be
|
|
* arbitrarily long; in practice the benefits don't justify having more
|
|
* than 2 stages (i.e., double buffering). But it helps to think of the
|
|
* pipeline as being a long one. Each buffer head contains a bulk-in and
|
|
* a bulk-out request pointer (since the buffer can be used for both
|
|
* output and input -- directions always are given from the host's
|
|
* point of view) as well as a pointer to the buffer and various state
|
|
* variables.
|
|
*
|
|
* Use of the pipeline follows a simple protocol. There is a variable
|
|
* (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
|
|
* At any time that buffer head may still be in use from an earlier
|
|
* request, so each buffer head has a state variable indicating whether
|
|
* it is EMPTY, FULL, or BUSY. Typical use involves waiting for the
|
|
* buffer head to be EMPTY, filling the buffer either by file I/O or by
|
|
* USB I/O (during which the buffer head is BUSY), and marking the buffer
|
|
* head FULL when the I/O is complete. Then the buffer will be emptied
|
|
* (again possibly by USB I/O, during which it is marked BUSY) and
|
|
* finally marked EMPTY again (possibly by a completion routine).
|
|
*
|
|
* A module parameter tells the driver to avoid stalling the bulk
|
|
* endpoints wherever the transport specification allows. This is
|
|
* necessary for some UDCs like the SuperH, which cannot reliably clear a
|
|
* halt on a bulk endpoint. However, under certain circumstances the
|
|
* Bulk-only specification requires a stall. In such cases the driver
|
|
* will halt the endpoint and set a flag indicating that it should clear
|
|
* the halt in software during the next device reset. Hopefully this
|
|
* will permit everything to work correctly. Furthermore, although the
|
|
* specification allows the bulk-out endpoint to halt when the host sends
|
|
* too much data, implementing this would cause an unavoidable race.
|
|
* The driver will always use the "no-stall" approach for OUT transfers.
|
|
*
|
|
* One subtle point concerns sending status-stage responses for ep0
|
|
* requests. Some of these requests, such as device reset, can involve
|
|
* interrupting an ongoing file I/O operation, which might take an
|
|
* arbitrarily long time. During that delay the host might give up on
|
|
* the original ep0 request and issue a new one. When that happens the
|
|
* driver should not notify the host about completion of the original
|
|
* request, as the host will no longer be waiting for it. So the driver
|
|
* assigns to each ep0 request a unique tag, and it keeps track of the
|
|
* tag value of the request associated with a long-running exception
|
|
* (device-reset, interface-change, or configuration-change). When the
|
|
* exception handler is finished, the status-stage response is submitted
|
|
* only if the current ep0 request tag is equal to the exception request
|
|
* tag. Thus only the most recently received ep0 request will get a
|
|
* status-stage response.
|
|
*
|
|
* Warning: This driver source file is too long. It ought to be split up
|
|
* into a header file plus about 3 separate .c files, to handle the details
|
|
* of the Gadget, USB Mass Storage, and SCSI protocols.
|
|
*/
|
|
|
|
|
|
/* #define VERBOSE_DEBUG */
|
|
/* #define DUMP_MSGS */
|
|
|
|
|
|
#include <linux/blkdev.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/dcache.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/file.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kref.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/limits.h>
|
|
#include <linux/module.h>
|
|
#include <linux/rwsem.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/string.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/utsname.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
|
|
#include "gadget_chips.h"
|
|
|
|
|
|
|
|
/*
|
|
* Kbuild is not very cooperative with respect to linking separately
|
|
* compiled library objects into one module. So for now we won't use
|
|
* separate compilation ... ensuring init/exit sections work to shrink
|
|
* the runtime footprint, and giving us at least some parts of what
|
|
* a "gcc --combine ... part1.c part2.c part3.c ... " build would.
|
|
*/
|
|
#include "usbstring.c"
|
|
#include "config.c"
|
|
#include "epautoconf.c"
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#define DRIVER_DESC "File-backed Storage Gadget"
|
|
#define DRIVER_NAME "g_file_storage"
|
|
#define DRIVER_VERSION "1 September 2010"
|
|
|
|
static char fsg_string_manufacturer[64];
|
|
static const char fsg_string_product[] = DRIVER_DESC;
|
|
static const char fsg_string_config[] = "Self-powered";
|
|
static const char fsg_string_interface[] = "Mass Storage";
|
|
|
|
|
|
#include "storage_common.c"
|
|
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_AUTHOR("Alan Stern");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
|
|
/*
|
|
* This driver assumes self-powered hardware and has no way for users to
|
|
* trigger remote wakeup. It uses autoconfiguration to select endpoints
|
|
* and endpoint addresses.
|
|
*/
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
/* Encapsulate the module parameter settings */
|
|
|
|
static struct {
|
|
char *file[FSG_MAX_LUNS];
|
|
char *serial;
|
|
int ro[FSG_MAX_LUNS];
|
|
int nofua[FSG_MAX_LUNS];
|
|
unsigned int num_filenames;
|
|
unsigned int num_ros;
|
|
unsigned int num_nofuas;
|
|
unsigned int nluns;
|
|
|
|
int removable;
|
|
int can_stall;
|
|
int cdrom;
|
|
|
|
char *transport_parm;
|
|
char *protocol_parm;
|
|
unsigned short vendor;
|
|
unsigned short product;
|
|
unsigned short release;
|
|
unsigned int buflen;
|
|
|
|
int transport_type;
|
|
char *transport_name;
|
|
int protocol_type;
|
|
char *protocol_name;
|
|
|
|
} mod_data = { // Default values
|
|
.transport_parm = "BBB",
|
|
.protocol_parm = "SCSI",
|
|
.removable = 0,
|
|
.can_stall = 1,
|
|
.cdrom = 0,
|
|
.vendor = FSG_VENDOR_ID,
|
|
.product = FSG_PRODUCT_ID,
|
|
.release = 0xffff, // Use controller chip type
|
|
.buflen = 16384,
|
|
};
|
|
|
|
|
|
module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
|
|
S_IRUGO);
|
|
MODULE_PARM_DESC(file, "names of backing files or devices");
|
|
|
|
module_param_named(serial, mod_data.serial, charp, S_IRUGO);
|
|
MODULE_PARM_DESC(serial, "USB serial number");
|
|
|
|
module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
|
|
MODULE_PARM_DESC(ro, "true to force read-only");
|
|
|
|
module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
|
|
S_IRUGO);
|
|
MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
|
|
|
|
module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
|
|
MODULE_PARM_DESC(luns, "number of LUNs");
|
|
|
|
module_param_named(removable, mod_data.removable, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(removable, "true to simulate removable media");
|
|
|
|
module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
|
|
|
|
module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
|
|
|
|
/* In the non-TEST version, only the module parameters listed above
|
|
* are available. */
|
|
#ifdef CONFIG_USB_FILE_STORAGE_TEST
|
|
|
|
module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO);
|
|
MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)");
|
|
|
|
module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO);
|
|
MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, "
|
|
"8070, or SCSI)");
|
|
|
|
module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO);
|
|
MODULE_PARM_DESC(vendor, "USB Vendor ID");
|
|
|
|
module_param_named(product, mod_data.product, ushort, S_IRUGO);
|
|
MODULE_PARM_DESC(product, "USB Product ID");
|
|
|
|
module_param_named(release, mod_data.release, ushort, S_IRUGO);
|
|
MODULE_PARM_DESC(release, "USB release number");
|
|
|
|
module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
|
|
MODULE_PARM_DESC(buflen, "I/O buffer size");
|
|
|
|
#endif /* CONFIG_USB_FILE_STORAGE_TEST */
|
|
|
|
|
|
/*
|
|
* These definitions will permit the compiler to avoid generating code for
|
|
* parts of the driver that aren't used in the non-TEST version. Even gcc
|
|
* can recognize when a test of a constant expression yields a dead code
|
|
* path.
|
|
*/
|
|
|
|
#ifdef CONFIG_USB_FILE_STORAGE_TEST
|
|
|
|
#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK)
|
|
#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI)
|
|
#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI)
|
|
|
|
#else
|
|
|
|
#define transport_is_bbb() 1
|
|
#define transport_is_cbi() 0
|
|
#define protocol_is_scsi() 1
|
|
|
|
#endif /* CONFIG_USB_FILE_STORAGE_TEST */
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
struct fsg_dev {
|
|
/* lock protects: state, all the req_busy's, and cbbuf_cmnd */
|
|
spinlock_t lock;
|
|
struct usb_gadget *gadget;
|
|
|
|
/* filesem protects: backing files in use */
|
|
struct rw_semaphore filesem;
|
|
|
|
/* reference counting: wait until all LUNs are released */
|
|
struct kref ref;
|
|
|
|
struct usb_ep *ep0; // Handy copy of gadget->ep0
|
|
struct usb_request *ep0req; // For control responses
|
|
unsigned int ep0_req_tag;
|
|
const char *ep0req_name;
|
|
|
|
struct usb_request *intreq; // For interrupt responses
|
|
int intreq_busy;
|
|
struct fsg_buffhd *intr_buffhd;
|
|
|
|
unsigned int bulk_out_maxpacket;
|
|
enum fsg_state state; // For exception handling
|
|
unsigned int exception_req_tag;
|
|
|
|
u8 config, new_config;
|
|
|
|
unsigned int running : 1;
|
|
unsigned int bulk_in_enabled : 1;
|
|
unsigned int bulk_out_enabled : 1;
|
|
unsigned int intr_in_enabled : 1;
|
|
unsigned int phase_error : 1;
|
|
unsigned int short_packet_received : 1;
|
|
unsigned int bad_lun_okay : 1;
|
|
|
|
unsigned long atomic_bitflags;
|
|
#define REGISTERED 0
|
|
#define IGNORE_BULK_OUT 1
|
|
#define SUSPENDED 2
|
|
|
|
struct usb_ep *bulk_in;
|
|
struct usb_ep *bulk_out;
|
|
struct usb_ep *intr_in;
|
|
|
|
struct fsg_buffhd *next_buffhd_to_fill;
|
|
struct fsg_buffhd *next_buffhd_to_drain;
|
|
|
|
int thread_wakeup_needed;
|
|
struct completion thread_notifier;
|
|
struct task_struct *thread_task;
|
|
|
|
int cmnd_size;
|
|
u8 cmnd[MAX_COMMAND_SIZE];
|
|
enum data_direction data_dir;
|
|
u32 data_size;
|
|
u32 data_size_from_cmnd;
|
|
u32 tag;
|
|
unsigned int lun;
|
|
u32 residue;
|
|
u32 usb_amount_left;
|
|
|
|
/* The CB protocol offers no way for a host to know when a command
|
|
* has completed. As a result the next command may arrive early,
|
|
* and we will still have to handle it. For that reason we need
|
|
* a buffer to store new commands when using CB (or CBI, which
|
|
* does not oblige a host to wait for command completion either). */
|
|
int cbbuf_cmnd_size;
|
|
u8 cbbuf_cmnd[MAX_COMMAND_SIZE];
|
|
|
|
unsigned int nluns;
|
|
struct fsg_lun *luns;
|
|
struct fsg_lun *curlun;
|
|
/* Must be the last entry */
|
|
struct fsg_buffhd buffhds[];
|
|
};
|
|
|
|
typedef void (*fsg_routine_t)(struct fsg_dev *);
|
|
|
|
static int exception_in_progress(struct fsg_dev *fsg)
|
|
{
|
|
return (fsg->state > FSG_STATE_IDLE);
|
|
}
|
|
|
|
/* Make bulk-out requests be divisible by the maxpacket size */
|
|
static void set_bulk_out_req_length(struct fsg_dev *fsg,
|
|
struct fsg_buffhd *bh, unsigned int length)
|
|
{
|
|
unsigned int rem;
|
|
|
|
bh->bulk_out_intended_length = length;
|
|
rem = length % fsg->bulk_out_maxpacket;
|
|
if (rem > 0)
|
|
length += fsg->bulk_out_maxpacket - rem;
|
|
bh->outreq->length = length;
|
|
}
|
|
|
|
static struct fsg_dev *the_fsg;
|
|
static struct usb_gadget_driver fsg_driver;
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
|
|
{
|
|
const char *name;
|
|
|
|
if (ep == fsg->bulk_in)
|
|
name = "bulk-in";
|
|
else if (ep == fsg->bulk_out)
|
|
name = "bulk-out";
|
|
else
|
|
name = ep->name;
|
|
DBG(fsg, "%s set halt\n", name);
|
|
return usb_ep_set_halt(ep);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* DESCRIPTORS ... most are static, but strings and (full) configuration
|
|
* descriptors are built on demand. Also the (static) config and interface
|
|
* descriptors are adjusted during fsg_bind().
|
|
*/
|
|
|
|
/* There is only one configuration. */
|
|
#define CONFIG_VALUE 1
|
|
|
|
static struct usb_device_descriptor
|
|
device_desc = {
|
|
.bLength = sizeof device_desc,
|
|
.bDescriptorType = USB_DT_DEVICE,
|
|
|
|
.bcdUSB = cpu_to_le16(0x0200),
|
|
.bDeviceClass = USB_CLASS_PER_INTERFACE,
|
|
|
|
/* The next three values can be overridden by module parameters */
|
|
.idVendor = cpu_to_le16(FSG_VENDOR_ID),
|
|
.idProduct = cpu_to_le16(FSG_PRODUCT_ID),
|
|
.bcdDevice = cpu_to_le16(0xffff),
|
|
|
|
.iManufacturer = FSG_STRING_MANUFACTURER,
|
|
.iProduct = FSG_STRING_PRODUCT,
|
|
.iSerialNumber = FSG_STRING_SERIAL,
|
|
.bNumConfigurations = 1,
|
|
};
|
|
|
|
static struct usb_config_descriptor
|
|
config_desc = {
|
|
.bLength = sizeof config_desc,
|
|
.bDescriptorType = USB_DT_CONFIG,
|
|
|
|
/* wTotalLength computed by usb_gadget_config_buf() */
|
|
.bNumInterfaces = 1,
|
|
.bConfigurationValue = CONFIG_VALUE,
|
|
.iConfiguration = FSG_STRING_CONFIG,
|
|
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
|
|
.bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
|
|
};
|
|
|
|
|
|
static struct usb_qualifier_descriptor
|
|
dev_qualifier = {
|
|
.bLength = sizeof dev_qualifier,
|
|
.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
|
|
|
|
.bcdUSB = cpu_to_le16(0x0200),
|
|
.bDeviceClass = USB_CLASS_PER_INTERFACE,
|
|
|
|
.bNumConfigurations = 1,
|
|
};
|
|
|
|
static int populate_bos(struct fsg_dev *fsg, u8 *buf)
|
|
{
|
|
memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
|
|
buf += USB_DT_BOS_SIZE;
|
|
|
|
memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
|
|
buf += USB_DT_USB_EXT_CAP_SIZE;
|
|
|
|
memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
|
|
|
|
return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
|
|
+ USB_DT_USB_EXT_CAP_SIZE;
|
|
}
|
|
|
|
/*
|
|
* Config descriptors must agree with the code that sets configurations
|
|
* and with code managing interfaces and their altsettings. They must
|
|
* also handle different speeds and other-speed requests.
|
|
*/
|
|
static int populate_config_buf(struct usb_gadget *gadget,
|
|
u8 *buf, u8 type, unsigned index)
|
|
{
|
|
enum usb_device_speed speed = gadget->speed;
|
|
int len;
|
|
const struct usb_descriptor_header **function;
|
|
|
|
if (index > 0)
|
|
return -EINVAL;
|
|
|
|
if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
|
|
speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
|
|
function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH
|
|
? (const struct usb_descriptor_header **)fsg_hs_function
|
|
: (const struct usb_descriptor_header **)fsg_fs_function;
|
|
|
|
/* for now, don't advertise srp-only devices */
|
|
if (!gadget_is_otg(gadget))
|
|
function++;
|
|
|
|
len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
|
|
((struct usb_config_descriptor *) buf)->bDescriptorType = type;
|
|
return len;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* These routines may be called in process context or in_irq */
|
|
|
|
/* Caller must hold fsg->lock */
|
|
static void wakeup_thread(struct fsg_dev *fsg)
|
|
{
|
|
/* Tell the main thread that something has happened */
|
|
fsg->thread_wakeup_needed = 1;
|
|
if (fsg->thread_task)
|
|
wake_up_process(fsg->thread_task);
|
|
}
|
|
|
|
|
|
static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* Do nothing if a higher-priority exception is already in progress.
|
|
* If a lower-or-equal priority exception is in progress, preempt it
|
|
* and notify the main thread by sending it a signal. */
|
|
spin_lock_irqsave(&fsg->lock, flags);
|
|
if (fsg->state <= new_state) {
|
|
fsg->exception_req_tag = fsg->ep0_req_tag;
|
|
fsg->state = new_state;
|
|
if (fsg->thread_task)
|
|
send_sig_info(SIGUSR1, SEND_SIG_FORCED,
|
|
fsg->thread_task);
|
|
}
|
|
spin_unlock_irqrestore(&fsg->lock, flags);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* The disconnect callback and ep0 routines. These always run in_irq,
|
|
* except that ep0_queue() is called in the main thread to acknowledge
|
|
* completion of various requests: set config, set interface, and
|
|
* Bulk-only device reset. */
|
|
|
|
static void fsg_disconnect(struct usb_gadget *gadget)
|
|
{
|
|
struct fsg_dev *fsg = get_gadget_data(gadget);
|
|
|
|
DBG(fsg, "disconnect or port reset\n");
|
|
raise_exception(fsg, FSG_STATE_DISCONNECT);
|
|
}
|
|
|
|
|
|
static int ep0_queue(struct fsg_dev *fsg)
|
|
{
|
|
int rc;
|
|
|
|
rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
|
|
if (rc != 0 && rc != -ESHUTDOWN) {
|
|
|
|
/* We can't do much more than wait for a reset */
|
|
WARNING(fsg, "error in submission: %s --> %d\n",
|
|
fsg->ep0->name, rc);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct fsg_dev *fsg = ep->driver_data;
|
|
|
|
if (req->actual > 0)
|
|
dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
|
|
if (req->status || req->actual != req->length)
|
|
DBG(fsg, "%s --> %d, %u/%u\n", __func__,
|
|
req->status, req->actual, req->length);
|
|
if (req->status == -ECONNRESET) // Request was cancelled
|
|
usb_ep_fifo_flush(ep);
|
|
|
|
if (req->status == 0 && req->context)
|
|
((fsg_routine_t) (req->context))(fsg);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Bulk and interrupt endpoint completion handlers.
|
|
* These always run in_irq. */
|
|
|
|
static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct fsg_dev *fsg = ep->driver_data;
|
|
struct fsg_buffhd *bh = req->context;
|
|
|
|
if (req->status || req->actual != req->length)
|
|
DBG(fsg, "%s --> %d, %u/%u\n", __func__,
|
|
req->status, req->actual, req->length);
|
|
if (req->status == -ECONNRESET) // Request was cancelled
|
|
usb_ep_fifo_flush(ep);
|
|
|
|
/* Hold the lock while we update the request and buffer states */
|
|
smp_wmb();
|
|
spin_lock(&fsg->lock);
|
|
bh->inreq_busy = 0;
|
|
bh->state = BUF_STATE_EMPTY;
|
|
wakeup_thread(fsg);
|
|
spin_unlock(&fsg->lock);
|
|
}
|
|
|
|
static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct fsg_dev *fsg = ep->driver_data;
|
|
struct fsg_buffhd *bh = req->context;
|
|
|
|
dump_msg(fsg, "bulk-out", req->buf, req->actual);
|
|
if (req->status || req->actual != bh->bulk_out_intended_length)
|
|
DBG(fsg, "%s --> %d, %u/%u\n", __func__,
|
|
req->status, req->actual,
|
|
bh->bulk_out_intended_length);
|
|
if (req->status == -ECONNRESET) // Request was cancelled
|
|
usb_ep_fifo_flush(ep);
|
|
|
|
/* Hold the lock while we update the request and buffer states */
|
|
smp_wmb();
|
|
spin_lock(&fsg->lock);
|
|
bh->outreq_busy = 0;
|
|
bh->state = BUF_STATE_FULL;
|
|
wakeup_thread(fsg);
|
|
spin_unlock(&fsg->lock);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_USB_FILE_STORAGE_TEST
|
|
static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
struct fsg_dev *fsg = ep->driver_data;
|
|
struct fsg_buffhd *bh = req->context;
|
|
|
|
if (req->status || req->actual != req->length)
|
|
DBG(fsg, "%s --> %d, %u/%u\n", __func__,
|
|
req->status, req->actual, req->length);
|
|
if (req->status == -ECONNRESET) // Request was cancelled
|
|
usb_ep_fifo_flush(ep);
|
|
|
|
/* Hold the lock while we update the request and buffer states */
|
|
smp_wmb();
|
|
spin_lock(&fsg->lock);
|
|
fsg->intreq_busy = 0;
|
|
bh->state = BUF_STATE_EMPTY;
|
|
wakeup_thread(fsg);
|
|
spin_unlock(&fsg->lock);
|
|
}
|
|
|
|
#else
|
|
static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{}
|
|
#endif /* CONFIG_USB_FILE_STORAGE_TEST */
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Ep0 class-specific handlers. These always run in_irq. */
|
|
|
|
#ifdef CONFIG_USB_FILE_STORAGE_TEST
|
|
static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
struct usb_request *req = fsg->ep0req;
|
|
static u8 cbi_reset_cmnd[6] = {
|
|
SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff};
|
|
|
|
/* Error in command transfer? */
|
|
if (req->status || req->length != req->actual ||
|
|
req->actual < 6 || req->actual > MAX_COMMAND_SIZE) {
|
|
|
|
/* Not all controllers allow a protocol stall after
|
|
* receiving control-out data, but we'll try anyway. */
|
|
fsg_set_halt(fsg, fsg->ep0);
|
|
return; // Wait for reset
|
|
}
|
|
|
|
/* Is it the special reset command? */
|
|
if (req->actual >= sizeof cbi_reset_cmnd &&
|
|
memcmp(req->buf, cbi_reset_cmnd,
|
|
sizeof cbi_reset_cmnd) == 0) {
|
|
|
|
/* Raise an exception to stop the current operation
|
|
* and reinitialize our state. */
|
|
DBG(fsg, "cbi reset request\n");
|
|
raise_exception(fsg, FSG_STATE_RESET);
|
|
return;
|
|
}
|
|
|
|
VDBG(fsg, "CB[I] accept device-specific command\n");
|
|
spin_lock(&fsg->lock);
|
|
|
|
/* Save the command for later */
|
|
if (fsg->cbbuf_cmnd_size)
|
|
WARNING(fsg, "CB[I] overwriting previous command\n");
|
|
fsg->cbbuf_cmnd_size = req->actual;
|
|
memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
|
|
|
|
wakeup_thread(fsg);
|
|
spin_unlock(&fsg->lock);
|
|
}
|
|
|
|
#else
|
|
static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{}
|
|
#endif /* CONFIG_USB_FILE_STORAGE_TEST */
|
|
|
|
|
|
static int class_setup_req(struct fsg_dev *fsg,
|
|
const struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct usb_request *req = fsg->ep0req;
|
|
int value = -EOPNOTSUPP;
|
|
u16 w_index = le16_to_cpu(ctrl->wIndex);
|
|
u16 w_value = le16_to_cpu(ctrl->wValue);
|
|
u16 w_length = le16_to_cpu(ctrl->wLength);
|
|
|
|
if (!fsg->config)
|
|
return value;
|
|
|
|
/* Handle Bulk-only class-specific requests */
|
|
if (transport_is_bbb()) {
|
|
switch (ctrl->bRequest) {
|
|
|
|
case USB_BULK_RESET_REQUEST:
|
|
if (ctrl->bRequestType != (USB_DIR_OUT |
|
|
USB_TYPE_CLASS | USB_RECIP_INTERFACE))
|
|
break;
|
|
if (w_index != 0 || w_value != 0 || w_length != 0) {
|
|
value = -EDOM;
|
|
break;
|
|
}
|
|
|
|
/* Raise an exception to stop the current operation
|
|
* and reinitialize our state. */
|
|
DBG(fsg, "bulk reset request\n");
|
|
raise_exception(fsg, FSG_STATE_RESET);
|
|
value = DELAYED_STATUS;
|
|
break;
|
|
|
|
case USB_BULK_GET_MAX_LUN_REQUEST:
|
|
if (ctrl->bRequestType != (USB_DIR_IN |
|
|
USB_TYPE_CLASS | USB_RECIP_INTERFACE))
|
|
break;
|
|
if (w_index != 0 || w_value != 0 || w_length != 1) {
|
|
value = -EDOM;
|
|
break;
|
|
}
|
|
VDBG(fsg, "get max LUN\n");
|
|
*(u8 *) req->buf = fsg->nluns - 1;
|
|
value = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Handle CBI class-specific requests */
|
|
else {
|
|
switch (ctrl->bRequest) {
|
|
|
|
case USB_CBI_ADSC_REQUEST:
|
|
if (ctrl->bRequestType != (USB_DIR_OUT |
|
|
USB_TYPE_CLASS | USB_RECIP_INTERFACE))
|
|
break;
|
|
if (w_index != 0 || w_value != 0) {
|
|
value = -EDOM;
|
|
break;
|
|
}
|
|
if (w_length > MAX_COMMAND_SIZE) {
|
|
value = -EOVERFLOW;
|
|
break;
|
|
}
|
|
value = w_length;
|
|
fsg->ep0req->context = received_cbi_adsc;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (value == -EOPNOTSUPP)
|
|
VDBG(fsg,
|
|
"unknown class-specific control req "
|
|
"%02x.%02x v%04x i%04x l%u\n",
|
|
ctrl->bRequestType, ctrl->bRequest,
|
|
le16_to_cpu(ctrl->wValue), w_index, w_length);
|
|
return value;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Ep0 standard request handlers. These always run in_irq. */
|
|
|
|
static int standard_setup_req(struct fsg_dev *fsg,
|
|
const struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct usb_request *req = fsg->ep0req;
|
|
int value = -EOPNOTSUPP;
|
|
u16 w_index = le16_to_cpu(ctrl->wIndex);
|
|
u16 w_value = le16_to_cpu(ctrl->wValue);
|
|
|
|
/* Usually this just stores reply data in the pre-allocated ep0 buffer,
|
|
* but config change events will also reconfigure hardware. */
|
|
switch (ctrl->bRequest) {
|
|
|
|
case USB_REQ_GET_DESCRIPTOR:
|
|
if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
|
|
USB_RECIP_DEVICE))
|
|
break;
|
|
switch (w_value >> 8) {
|
|
|
|
case USB_DT_DEVICE:
|
|
VDBG(fsg, "get device descriptor\n");
|
|
device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
|
|
value = sizeof device_desc;
|
|
memcpy(req->buf, &device_desc, value);
|
|
break;
|
|
case USB_DT_DEVICE_QUALIFIER:
|
|
VDBG(fsg, "get device qualifier\n");
|
|
if (!gadget_is_dualspeed(fsg->gadget) ||
|
|
fsg->gadget->speed == USB_SPEED_SUPER)
|
|
break;
|
|
/*
|
|
* Assume ep0 uses the same maxpacket value for both
|
|
* speeds
|
|
*/
|
|
dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
|
|
value = sizeof dev_qualifier;
|
|
memcpy(req->buf, &dev_qualifier, value);
|
|
break;
|
|
|
|
case USB_DT_OTHER_SPEED_CONFIG:
|
|
VDBG(fsg, "get other-speed config descriptor\n");
|
|
if (!gadget_is_dualspeed(fsg->gadget) ||
|
|
fsg->gadget->speed == USB_SPEED_SUPER)
|
|
break;
|
|
goto get_config;
|
|
case USB_DT_CONFIG:
|
|
VDBG(fsg, "get configuration descriptor\n");
|
|
get_config:
|
|
value = populate_config_buf(fsg->gadget,
|
|
req->buf,
|
|
w_value >> 8,
|
|
w_value & 0xff);
|
|
break;
|
|
|
|
case USB_DT_STRING:
|
|
VDBG(fsg, "get string descriptor\n");
|
|
|
|
/* wIndex == language code */
|
|
value = usb_gadget_get_string(&fsg_stringtab,
|
|
w_value & 0xff, req->buf);
|
|
break;
|
|
|
|
case USB_DT_BOS:
|
|
VDBG(fsg, "get bos descriptor\n");
|
|
|
|
if (gadget_is_superspeed(fsg->gadget))
|
|
value = populate_bos(fsg, req->buf);
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
/* One config, two speeds */
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
|
|
USB_RECIP_DEVICE))
|
|
break;
|
|
VDBG(fsg, "set configuration\n");
|
|
if (w_value == CONFIG_VALUE || w_value == 0) {
|
|
fsg->new_config = w_value;
|
|
|
|
/* Raise an exception to wipe out previous transaction
|
|
* state (queued bufs, etc) and set the new config. */
|
|
raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
|
|
value = DELAYED_STATUS;
|
|
}
|
|
break;
|
|
case USB_REQ_GET_CONFIGURATION:
|
|
if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
|
|
USB_RECIP_DEVICE))
|
|
break;
|
|
VDBG(fsg, "get configuration\n");
|
|
*(u8 *) req->buf = fsg->config;
|
|
value = 1;
|
|
break;
|
|
|
|
case USB_REQ_SET_INTERFACE:
|
|
if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
|
|
USB_RECIP_INTERFACE))
|
|
break;
|
|
if (fsg->config && w_index == 0) {
|
|
|
|
/* Raise an exception to wipe out previous transaction
|
|
* state (queued bufs, etc) and install the new
|
|
* interface altsetting. */
|
|
raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
|
|
value = DELAYED_STATUS;
|
|
}
|
|
break;
|
|
case USB_REQ_GET_INTERFACE:
|
|
if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
|
|
USB_RECIP_INTERFACE))
|
|
break;
|
|
if (!fsg->config)
|
|
break;
|
|
if (w_index != 0) {
|
|
value = -EDOM;
|
|
break;
|
|
}
|
|
VDBG(fsg, "get interface\n");
|
|
*(u8 *) req->buf = 0;
|
|
value = 1;
|
|
break;
|
|
|
|
default:
|
|
VDBG(fsg,
|
|
"unknown control req %02x.%02x v%04x i%04x l%u\n",
|
|
ctrl->bRequestType, ctrl->bRequest,
|
|
w_value, w_index, le16_to_cpu(ctrl->wLength));
|
|
}
|
|
|
|
return value;
|
|
}
|
|
|
|
|
|
static int fsg_setup(struct usb_gadget *gadget,
|
|
const struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct fsg_dev *fsg = get_gadget_data(gadget);
|
|
int rc;
|
|
int w_length = le16_to_cpu(ctrl->wLength);
|
|
|
|
++fsg->ep0_req_tag; // Record arrival of a new request
|
|
fsg->ep0req->context = NULL;
|
|
fsg->ep0req->length = 0;
|
|
dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
|
|
|
|
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
|
|
rc = class_setup_req(fsg, ctrl);
|
|
else
|
|
rc = standard_setup_req(fsg, ctrl);
|
|
|
|
/* Respond with data/status or defer until later? */
|
|
if (rc >= 0 && rc != DELAYED_STATUS) {
|
|
rc = min(rc, w_length);
|
|
fsg->ep0req->length = rc;
|
|
fsg->ep0req->zero = rc < w_length;
|
|
fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
|
|
"ep0-in" : "ep0-out");
|
|
rc = ep0_queue(fsg);
|
|
}
|
|
|
|
/* Device either stalls (rc < 0) or reports success */
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* All the following routines run in process context */
|
|
|
|
|
|
/* Use this for bulk or interrupt transfers, not ep0 */
|
|
static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
|
|
struct usb_request *req, int *pbusy,
|
|
enum fsg_buffer_state *state)
|
|
{
|
|
int rc;
|
|
|
|
if (ep == fsg->bulk_in)
|
|
dump_msg(fsg, "bulk-in", req->buf, req->length);
|
|
else if (ep == fsg->intr_in)
|
|
dump_msg(fsg, "intr-in", req->buf, req->length);
|
|
|
|
spin_lock_irq(&fsg->lock);
|
|
*pbusy = 1;
|
|
*state = BUF_STATE_BUSY;
|
|
spin_unlock_irq(&fsg->lock);
|
|
rc = usb_ep_queue(ep, req, GFP_KERNEL);
|
|
if (rc != 0) {
|
|
*pbusy = 0;
|
|
*state = BUF_STATE_EMPTY;
|
|
|
|
/* We can't do much more than wait for a reset */
|
|
|
|
/* Note: currently the net2280 driver fails zero-length
|
|
* submissions if DMA is enabled. */
|
|
if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
|
|
req->length == 0))
|
|
WARNING(fsg, "error in submission: %s --> %d\n",
|
|
ep->name, rc);
|
|
}
|
|
}
|
|
|
|
|
|
static int sleep_thread(struct fsg_dev *fsg)
|
|
{
|
|
int rc = 0;
|
|
|
|
/* Wait until a signal arrives or we are woken up */
|
|
for (;;) {
|
|
try_to_freeze();
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
if (signal_pending(current)) {
|
|
rc = -EINTR;
|
|
break;
|
|
}
|
|
if (fsg->thread_wakeup_needed)
|
|
break;
|
|
schedule();
|
|
}
|
|
__set_current_state(TASK_RUNNING);
|
|
fsg->thread_wakeup_needed = 0;
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int do_read(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
u32 lba;
|
|
struct fsg_buffhd *bh;
|
|
int rc;
|
|
u32 amount_left;
|
|
loff_t file_offset, file_offset_tmp;
|
|
unsigned int amount;
|
|
ssize_t nread;
|
|
|
|
/* Get the starting Logical Block Address and check that it's
|
|
* not too big */
|
|
if (fsg->cmnd[0] == READ_6)
|
|
lba = get_unaligned_be24(&fsg->cmnd[1]);
|
|
else {
|
|
lba = get_unaligned_be32(&fsg->cmnd[2]);
|
|
|
|
/* We allow DPO (Disable Page Out = don't save data in the
|
|
* cache) and FUA (Force Unit Access = don't read from the
|
|
* cache), but we don't implement them. */
|
|
if ((fsg->cmnd[1] & ~0x18) != 0) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
if (lba >= curlun->num_sectors) {
|
|
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
return -EINVAL;
|
|
}
|
|
file_offset = ((loff_t) lba) << curlun->blkbits;
|
|
|
|
/* Carry out the file reads */
|
|
amount_left = fsg->data_size_from_cmnd;
|
|
if (unlikely(amount_left == 0))
|
|
return -EIO; // No default reply
|
|
|
|
for (;;) {
|
|
|
|
/* Figure out how much we need to read:
|
|
* Try to read the remaining amount.
|
|
* But don't read more than the buffer size.
|
|
* And don't try to read past the end of the file.
|
|
*/
|
|
amount = min((unsigned int) amount_left, mod_data.buflen);
|
|
amount = min((loff_t) amount,
|
|
curlun->file_length - file_offset);
|
|
|
|
/* Wait for the next buffer to become available */
|
|
bh = fsg->next_buffhd_to_fill;
|
|
while (bh->state != BUF_STATE_EMPTY) {
|
|
rc = sleep_thread(fsg);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
/* If we were asked to read past the end of file,
|
|
* end with an empty buffer. */
|
|
if (amount == 0) {
|
|
curlun->sense_data =
|
|
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
curlun->sense_data_info = file_offset >> curlun->blkbits;
|
|
curlun->info_valid = 1;
|
|
bh->inreq->length = 0;
|
|
bh->state = BUF_STATE_FULL;
|
|
break;
|
|
}
|
|
|
|
/* Perform the read */
|
|
file_offset_tmp = file_offset;
|
|
nread = vfs_read(curlun->filp,
|
|
(char __user *) bh->buf,
|
|
amount, &file_offset_tmp);
|
|
VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
|
|
(unsigned long long) file_offset,
|
|
(int) nread);
|
|
if (signal_pending(current))
|
|
return -EINTR;
|
|
|
|
if (nread < 0) {
|
|
LDBG(curlun, "error in file read: %d\n",
|
|
(int) nread);
|
|
nread = 0;
|
|
} else if (nread < amount) {
|
|
LDBG(curlun, "partial file read: %d/%u\n",
|
|
(int) nread, amount);
|
|
nread = round_down(nread, curlun->blksize);
|
|
}
|
|
file_offset += nread;
|
|
amount_left -= nread;
|
|
fsg->residue -= nread;
|
|
|
|
/* Except at the end of the transfer, nread will be
|
|
* equal to the buffer size, which is divisible by the
|
|
* bulk-in maxpacket size.
|
|
*/
|
|
bh->inreq->length = nread;
|
|
bh->state = BUF_STATE_FULL;
|
|
|
|
/* If an error occurred, report it and its position */
|
|
if (nread < amount) {
|
|
curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
|
|
curlun->sense_data_info = file_offset >> curlun->blkbits;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
|
|
if (amount_left == 0)
|
|
break; // No more left to read
|
|
|
|
/* Send this buffer and go read some more */
|
|
bh->inreq->zero = 0;
|
|
start_transfer(fsg, fsg->bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state);
|
|
fsg->next_buffhd_to_fill = bh->next;
|
|
}
|
|
|
|
return -EIO; // No default reply
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int do_write(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
u32 lba;
|
|
struct fsg_buffhd *bh;
|
|
int get_some_more;
|
|
u32 amount_left_to_req, amount_left_to_write;
|
|
loff_t usb_offset, file_offset, file_offset_tmp;
|
|
unsigned int amount;
|
|
ssize_t nwritten;
|
|
int rc;
|
|
|
|
if (curlun->ro) {
|
|
curlun->sense_data = SS_WRITE_PROTECTED;
|
|
return -EINVAL;
|
|
}
|
|
spin_lock(&curlun->filp->f_lock);
|
|
curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait
|
|
spin_unlock(&curlun->filp->f_lock);
|
|
|
|
/* Get the starting Logical Block Address and check that it's
|
|
* not too big */
|
|
if (fsg->cmnd[0] == WRITE_6)
|
|
lba = get_unaligned_be24(&fsg->cmnd[1]);
|
|
else {
|
|
lba = get_unaligned_be32(&fsg->cmnd[2]);
|
|
|
|
/* We allow DPO (Disable Page Out = don't save data in the
|
|
* cache) and FUA (Force Unit Access = write directly to the
|
|
* medium). We don't implement DPO; we implement FUA by
|
|
* performing synchronous output. */
|
|
if ((fsg->cmnd[1] & ~0x18) != 0) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
/* FUA */
|
|
if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
|
|
spin_lock(&curlun->filp->f_lock);
|
|
curlun->filp->f_flags |= O_DSYNC;
|
|
spin_unlock(&curlun->filp->f_lock);
|
|
}
|
|
}
|
|
if (lba >= curlun->num_sectors) {
|
|
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Carry out the file writes */
|
|
get_some_more = 1;
|
|
file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
|
|
amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
|
|
|
|
while (amount_left_to_write > 0) {
|
|
|
|
/* Queue a request for more data from the host */
|
|
bh = fsg->next_buffhd_to_fill;
|
|
if (bh->state == BUF_STATE_EMPTY && get_some_more) {
|
|
|
|
/* Figure out how much we want to get:
|
|
* Try to get the remaining amount,
|
|
* but not more than the buffer size.
|
|
*/
|
|
amount = min(amount_left_to_req, mod_data.buflen);
|
|
|
|
/* Beyond the end of the backing file? */
|
|
if (usb_offset >= curlun->file_length) {
|
|
get_some_more = 0;
|
|
curlun->sense_data =
|
|
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
curlun->sense_data_info = usb_offset >> curlun->blkbits;
|
|
curlun->info_valid = 1;
|
|
continue;
|
|
}
|
|
|
|
/* Get the next buffer */
|
|
usb_offset += amount;
|
|
fsg->usb_amount_left -= amount;
|
|
amount_left_to_req -= amount;
|
|
if (amount_left_to_req == 0)
|
|
get_some_more = 0;
|
|
|
|
/* Except at the end of the transfer, amount will be
|
|
* equal to the buffer size, which is divisible by
|
|
* the bulk-out maxpacket size.
|
|
*/
|
|
set_bulk_out_req_length(fsg, bh, amount);
|
|
start_transfer(fsg, fsg->bulk_out, bh->outreq,
|
|
&bh->outreq_busy, &bh->state);
|
|
fsg->next_buffhd_to_fill = bh->next;
|
|
continue;
|
|
}
|
|
|
|
/* Write the received data to the backing file */
|
|
bh = fsg->next_buffhd_to_drain;
|
|
if (bh->state == BUF_STATE_EMPTY && !get_some_more)
|
|
break; // We stopped early
|
|
if (bh->state == BUF_STATE_FULL) {
|
|
smp_rmb();
|
|
fsg->next_buffhd_to_drain = bh->next;
|
|
bh->state = BUF_STATE_EMPTY;
|
|
|
|
/* Did something go wrong with the transfer? */
|
|
if (bh->outreq->status != 0) {
|
|
curlun->sense_data = SS_COMMUNICATION_FAILURE;
|
|
curlun->sense_data_info = file_offset >> curlun->blkbits;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
|
|
amount = bh->outreq->actual;
|
|
if (curlun->file_length - file_offset < amount) {
|
|
LERROR(curlun,
|
|
"write %u @ %llu beyond end %llu\n",
|
|
amount, (unsigned long long) file_offset,
|
|
(unsigned long long) curlun->file_length);
|
|
amount = curlun->file_length - file_offset;
|
|
}
|
|
|
|
/* Don't accept excess data. The spec doesn't say
|
|
* what to do in this case. We'll ignore the error.
|
|
*/
|
|
amount = min(amount, bh->bulk_out_intended_length);
|
|
|
|
/* Don't write a partial block */
|
|
amount = round_down(amount, curlun->blksize);
|
|
if (amount == 0)
|
|
goto empty_write;
|
|
|
|
/* Perform the write */
|
|
file_offset_tmp = file_offset;
|
|
nwritten = vfs_write(curlun->filp,
|
|
(char __user *) bh->buf,
|
|
amount, &file_offset_tmp);
|
|
VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
|
|
(unsigned long long) file_offset,
|
|
(int) nwritten);
|
|
if (signal_pending(current))
|
|
return -EINTR; // Interrupted!
|
|
|
|
if (nwritten < 0) {
|
|
LDBG(curlun, "error in file write: %d\n",
|
|
(int) nwritten);
|
|
nwritten = 0;
|
|
} else if (nwritten < amount) {
|
|
LDBG(curlun, "partial file write: %d/%u\n",
|
|
(int) nwritten, amount);
|
|
nwritten = round_down(nwritten, curlun->blksize);
|
|
}
|
|
file_offset += nwritten;
|
|
amount_left_to_write -= nwritten;
|
|
fsg->residue -= nwritten;
|
|
|
|
/* If an error occurred, report it and its position */
|
|
if (nwritten < amount) {
|
|
curlun->sense_data = SS_WRITE_ERROR;
|
|
curlun->sense_data_info = file_offset >> curlun->blkbits;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
|
|
empty_write:
|
|
/* Did the host decide to stop early? */
|
|
if (bh->outreq->actual < bh->bulk_out_intended_length) {
|
|
fsg->short_packet_received = 1;
|
|
break;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/* Wait for something to happen */
|
|
rc = sleep_thread(fsg);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
return -EIO; // No default reply
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int do_synchronize_cache(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
int rc;
|
|
|
|
/* We ignore the requested LBA and write out all file's
|
|
* dirty data buffers. */
|
|
rc = fsg_lun_fsync_sub(curlun);
|
|
if (rc)
|
|
curlun->sense_data = SS_WRITE_ERROR;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void invalidate_sub(struct fsg_lun *curlun)
|
|
{
|
|
struct file *filp = curlun->filp;
|
|
struct inode *inode = filp->f_path.dentry->d_inode;
|
|
unsigned long rc;
|
|
|
|
rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
|
|
VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
|
|
}
|
|
|
|
static int do_verify(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
u32 lba;
|
|
u32 verification_length;
|
|
struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
|
|
loff_t file_offset, file_offset_tmp;
|
|
u32 amount_left;
|
|
unsigned int amount;
|
|
ssize_t nread;
|
|
|
|
/* Get the starting Logical Block Address and check that it's
|
|
* not too big */
|
|
lba = get_unaligned_be32(&fsg->cmnd[2]);
|
|
if (lba >= curlun->num_sectors) {
|
|
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* We allow DPO (Disable Page Out = don't save data in the
|
|
* cache) but we don't implement it. */
|
|
if ((fsg->cmnd[1] & ~0x10) != 0) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
verification_length = get_unaligned_be16(&fsg->cmnd[7]);
|
|
if (unlikely(verification_length == 0))
|
|
return -EIO; // No default reply
|
|
|
|
/* Prepare to carry out the file verify */
|
|
amount_left = verification_length << curlun->blkbits;
|
|
file_offset = ((loff_t) lba) << curlun->blkbits;
|
|
|
|
/* Write out all the dirty buffers before invalidating them */
|
|
fsg_lun_fsync_sub(curlun);
|
|
if (signal_pending(current))
|
|
return -EINTR;
|
|
|
|
invalidate_sub(curlun);
|
|
if (signal_pending(current))
|
|
return -EINTR;
|
|
|
|
/* Just try to read the requested blocks */
|
|
while (amount_left > 0) {
|
|
|
|
/* Figure out how much we need to read:
|
|
* Try to read the remaining amount, but not more than
|
|
* the buffer size.
|
|
* And don't try to read past the end of the file.
|
|
*/
|
|
amount = min((unsigned int) amount_left, mod_data.buflen);
|
|
amount = min((loff_t) amount,
|
|
curlun->file_length - file_offset);
|
|
if (amount == 0) {
|
|
curlun->sense_data =
|
|
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
curlun->sense_data_info = file_offset >> curlun->blkbits;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
|
|
/* Perform the read */
|
|
file_offset_tmp = file_offset;
|
|
nread = vfs_read(curlun->filp,
|
|
(char __user *) bh->buf,
|
|
amount, &file_offset_tmp);
|
|
VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
|
|
(unsigned long long) file_offset,
|
|
(int) nread);
|
|
if (signal_pending(current))
|
|
return -EINTR;
|
|
|
|
if (nread < 0) {
|
|
LDBG(curlun, "error in file verify: %d\n",
|
|
(int) nread);
|
|
nread = 0;
|
|
} else if (nread < amount) {
|
|
LDBG(curlun, "partial file verify: %d/%u\n",
|
|
(int) nread, amount);
|
|
nread = round_down(nread, curlun->blksize);
|
|
}
|
|
if (nread == 0) {
|
|
curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
|
|
curlun->sense_data_info = file_offset >> curlun->blkbits;
|
|
curlun->info_valid = 1;
|
|
break;
|
|
}
|
|
file_offset += nread;
|
|
amount_left -= nread;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
static char vendor_id[] = "Linux ";
|
|
static char product_disk_id[] = "File-Stor Gadget";
|
|
static char product_cdrom_id[] = "File-CD Gadget ";
|
|
|
|
if (!fsg->curlun) { // Unsupported LUNs are okay
|
|
fsg->bad_lun_okay = 1;
|
|
memset(buf, 0, 36);
|
|
buf[0] = 0x7f; // Unsupported, no device-type
|
|
buf[4] = 31; // Additional length
|
|
return 36;
|
|
}
|
|
|
|
memset(buf, 0, 8);
|
|
buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK);
|
|
if (mod_data.removable)
|
|
buf[1] = 0x80;
|
|
buf[2] = 2; // ANSI SCSI level 2
|
|
buf[3] = 2; // SCSI-2 INQUIRY data format
|
|
buf[4] = 31; // Additional length
|
|
// No special options
|
|
sprintf(buf + 8, "%-8s%-16s%04x", vendor_id,
|
|
(mod_data.cdrom ? product_cdrom_id :
|
|
product_disk_id),
|
|
mod_data.release);
|
|
return 36;
|
|
}
|
|
|
|
|
|
static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
u8 *buf = (u8 *) bh->buf;
|
|
u32 sd, sdinfo;
|
|
int valid;
|
|
|
|
/*
|
|
* From the SCSI-2 spec., section 7.9 (Unit attention condition):
|
|
*
|
|
* If a REQUEST SENSE command is received from an initiator
|
|
* with a pending unit attention condition (before the target
|
|
* generates the contingent allegiance condition), then the
|
|
* target shall either:
|
|
* a) report any pending sense data and preserve the unit
|
|
* attention condition on the logical unit, or,
|
|
* b) report the unit attention condition, may discard any
|
|
* pending sense data, and clear the unit attention
|
|
* condition on the logical unit for that initiator.
|
|
*
|
|
* FSG normally uses option a); enable this code to use option b).
|
|
*/
|
|
#if 0
|
|
if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
|
|
curlun->sense_data = curlun->unit_attention_data;
|
|
curlun->unit_attention_data = SS_NO_SENSE;
|
|
}
|
|
#endif
|
|
|
|
if (!curlun) { // Unsupported LUNs are okay
|
|
fsg->bad_lun_okay = 1;
|
|
sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
|
|
sdinfo = 0;
|
|
valid = 0;
|
|
} else {
|
|
sd = curlun->sense_data;
|
|
sdinfo = curlun->sense_data_info;
|
|
valid = curlun->info_valid << 7;
|
|
curlun->sense_data = SS_NO_SENSE;
|
|
curlun->sense_data_info = 0;
|
|
curlun->info_valid = 0;
|
|
}
|
|
|
|
memset(buf, 0, 18);
|
|
buf[0] = valid | 0x70; // Valid, current error
|
|
buf[2] = SK(sd);
|
|
put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */
|
|
buf[7] = 18 - 8; // Additional sense length
|
|
buf[12] = ASC(sd);
|
|
buf[13] = ASCQ(sd);
|
|
return 18;
|
|
}
|
|
|
|
|
|
static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
|
|
int pmi = fsg->cmnd[8];
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
/* Check the PMI and LBA fields */
|
|
if (pmi > 1 || (pmi == 0 && lba != 0)) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
|
|
/* Max logical block */
|
|
put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */
|
|
return 8;
|
|
}
|
|
|
|
|
|
static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
int msf = fsg->cmnd[1] & 0x02;
|
|
u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
if (lba >= curlun->num_sectors) {
|
|
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(buf, 0, 8);
|
|
buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */
|
|
store_cdrom_address(&buf[4], msf, lba);
|
|
return 8;
|
|
}
|
|
|
|
|
|
static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
int msf = fsg->cmnd[1] & 0x02;
|
|
int start_track = fsg->cmnd[6];
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */
|
|
start_track > 1) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(buf, 0, 20);
|
|
buf[1] = (20-2); /* TOC data length */
|
|
buf[2] = 1; /* First track number */
|
|
buf[3] = 1; /* Last track number */
|
|
buf[5] = 0x16; /* Data track, copying allowed */
|
|
buf[6] = 0x01; /* Only track is number 1 */
|
|
store_cdrom_address(&buf[8], msf, 0);
|
|
|
|
buf[13] = 0x16; /* Lead-out track is data */
|
|
buf[14] = 0xAA; /* Lead-out track number */
|
|
store_cdrom_address(&buf[16], msf, curlun->num_sectors);
|
|
return 20;
|
|
}
|
|
|
|
|
|
static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
int mscmnd = fsg->cmnd[0];
|
|
u8 *buf = (u8 *) bh->buf;
|
|
u8 *buf0 = buf;
|
|
int pc, page_code;
|
|
int changeable_values, all_pages;
|
|
int valid_page = 0;
|
|
int len, limit;
|
|
|
|
if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
pc = fsg->cmnd[2] >> 6;
|
|
page_code = fsg->cmnd[2] & 0x3f;
|
|
if (pc == 3) {
|
|
curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
|
|
return -EINVAL;
|
|
}
|
|
changeable_values = (pc == 1);
|
|
all_pages = (page_code == 0x3f);
|
|
|
|
/* Write the mode parameter header. Fixed values are: default
|
|
* medium type, no cache control (DPOFUA), and no block descriptors.
|
|
* The only variable value is the WriteProtect bit. We will fill in
|
|
* the mode data length later. */
|
|
memset(buf, 0, 8);
|
|
if (mscmnd == MODE_SENSE) {
|
|
buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
|
|
buf += 4;
|
|
limit = 255;
|
|
} else { // MODE_SENSE_10
|
|
buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
|
|
buf += 8;
|
|
limit = 65535; // Should really be mod_data.buflen
|
|
}
|
|
|
|
/* No block descriptors */
|
|
|
|
/* The mode pages, in numerical order. The only page we support
|
|
* is the Caching page. */
|
|
if (page_code == 0x08 || all_pages) {
|
|
valid_page = 1;
|
|
buf[0] = 0x08; // Page code
|
|
buf[1] = 10; // Page length
|
|
memset(buf+2, 0, 10); // None of the fields are changeable
|
|
|
|
if (!changeable_values) {
|
|
buf[2] = 0x04; // Write cache enable,
|
|
// Read cache not disabled
|
|
// No cache retention priorities
|
|
put_unaligned_be16(0xffff, &buf[4]);
|
|
/* Don't disable prefetch */
|
|
/* Minimum prefetch = 0 */
|
|
put_unaligned_be16(0xffff, &buf[8]);
|
|
/* Maximum prefetch */
|
|
put_unaligned_be16(0xffff, &buf[10]);
|
|
/* Maximum prefetch ceiling */
|
|
}
|
|
buf += 12;
|
|
}
|
|
|
|
/* Check that a valid page was requested and the mode data length
|
|
* isn't too long. */
|
|
len = buf - buf0;
|
|
if (!valid_page || len > limit) {
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Store the mode data length */
|
|
if (mscmnd == MODE_SENSE)
|
|
buf0[0] = len - 1;
|
|
else
|
|
put_unaligned_be16(len - 2, buf0);
|
|
return len;
|
|
}
|
|
|
|
|
|
static int do_start_stop(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
int loej, start;
|
|
|
|
if (!mod_data.removable) {
|
|
curlun->sense_data = SS_INVALID_COMMAND;
|
|
return -EINVAL;
|
|
}
|
|
|
|
// int immed = fsg->cmnd[1] & 0x01;
|
|
loej = fsg->cmnd[4] & 0x02;
|
|
start = fsg->cmnd[4] & 0x01;
|
|
|
|
#ifdef CONFIG_USB_FILE_STORAGE_TEST
|
|
if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed
|
|
(fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!start) {
|
|
|
|
/* Are we allowed to unload the media? */
|
|
if (curlun->prevent_medium_removal) {
|
|
LDBG(curlun, "unload attempt prevented\n");
|
|
curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
|
|
return -EINVAL;
|
|
}
|
|
if (loej) { // Simulate an unload/eject
|
|
up_read(&fsg->filesem);
|
|
down_write(&fsg->filesem);
|
|
fsg_lun_close(curlun);
|
|
up_write(&fsg->filesem);
|
|
down_read(&fsg->filesem);
|
|
}
|
|
} else {
|
|
|
|
/* Our emulation doesn't support mounting; the medium is
|
|
* available for use as soon as it is loaded. */
|
|
if (!fsg_lun_is_open(curlun)) {
|
|
curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int do_prevent_allow(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
int prevent;
|
|
|
|
if (!mod_data.removable) {
|
|
curlun->sense_data = SS_INVALID_COMMAND;
|
|
return -EINVAL;
|
|
}
|
|
|
|
prevent = fsg->cmnd[4] & 0x01;
|
|
if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (curlun->prevent_medium_removal && !prevent)
|
|
fsg_lun_fsync_sub(curlun);
|
|
curlun->prevent_medium_removal = prevent;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int do_read_format_capacities(struct fsg_dev *fsg,
|
|
struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
u8 *buf = (u8 *) bh->buf;
|
|
|
|
buf[0] = buf[1] = buf[2] = 0;
|
|
buf[3] = 8; // Only the Current/Maximum Capacity Descriptor
|
|
buf += 4;
|
|
|
|
put_unaligned_be32(curlun->num_sectors, &buf[0]);
|
|
/* Number of blocks */
|
|
put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */
|
|
buf[4] = 0x02; /* Current capacity */
|
|
return 12;
|
|
}
|
|
|
|
|
|
static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
|
|
/* We don't support MODE SELECT */
|
|
curlun->sense_data = SS_INVALID_COMMAND;
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
|
|
{
|
|
int rc;
|
|
|
|
rc = fsg_set_halt(fsg, fsg->bulk_in);
|
|
if (rc == -EAGAIN)
|
|
VDBG(fsg, "delayed bulk-in endpoint halt\n");
|
|
while (rc != 0) {
|
|
if (rc != -EAGAIN) {
|
|
WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
|
|
rc = 0;
|
|
break;
|
|
}
|
|
|
|
/* Wait for a short time and then try again */
|
|
if (msleep_interruptible(100) != 0)
|
|
return -EINTR;
|
|
rc = usb_ep_set_halt(fsg->bulk_in);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
|
|
{
|
|
int rc;
|
|
|
|
DBG(fsg, "bulk-in set wedge\n");
|
|
rc = usb_ep_set_wedge(fsg->bulk_in);
|
|
if (rc == -EAGAIN)
|
|
VDBG(fsg, "delayed bulk-in endpoint wedge\n");
|
|
while (rc != 0) {
|
|
if (rc != -EAGAIN) {
|
|
WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
|
|
rc = 0;
|
|
break;
|
|
}
|
|
|
|
/* Wait for a short time and then try again */
|
|
if (msleep_interruptible(100) != 0)
|
|
return -EINTR;
|
|
rc = usb_ep_set_wedge(fsg->bulk_in);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int throw_away_data(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_buffhd *bh;
|
|
u32 amount;
|
|
int rc;
|
|
|
|
while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
|
|
fsg->usb_amount_left > 0) {
|
|
|
|
/* Throw away the data in a filled buffer */
|
|
if (bh->state == BUF_STATE_FULL) {
|
|
smp_rmb();
|
|
bh->state = BUF_STATE_EMPTY;
|
|
fsg->next_buffhd_to_drain = bh->next;
|
|
|
|
/* A short packet or an error ends everything */
|
|
if (bh->outreq->actual < bh->bulk_out_intended_length ||
|
|
bh->outreq->status != 0) {
|
|
raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
|
|
return -EINTR;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/* Try to submit another request if we need one */
|
|
bh = fsg->next_buffhd_to_fill;
|
|
if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
|
|
amount = min(fsg->usb_amount_left,
|
|
(u32) mod_data.buflen);
|
|
|
|
/* Except at the end of the transfer, amount will be
|
|
* equal to the buffer size, which is divisible by
|
|
* the bulk-out maxpacket size.
|
|
*/
|
|
set_bulk_out_req_length(fsg, bh, amount);
|
|
start_transfer(fsg, fsg->bulk_out, bh->outreq,
|
|
&bh->outreq_busy, &bh->state);
|
|
fsg->next_buffhd_to_fill = bh->next;
|
|
fsg->usb_amount_left -= amount;
|
|
continue;
|
|
}
|
|
|
|
/* Otherwise wait for something to happen */
|
|
rc = sleep_thread(fsg);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int finish_reply(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
|
|
int rc = 0;
|
|
|
|
switch (fsg->data_dir) {
|
|
case DATA_DIR_NONE:
|
|
break; // Nothing to send
|
|
|
|
/* If we don't know whether the host wants to read or write,
|
|
* this must be CB or CBI with an unknown command. We mustn't
|
|
* try to send or receive any data. So stall both bulk pipes
|
|
* if we can and wait for a reset. */
|
|
case DATA_DIR_UNKNOWN:
|
|
if (mod_data.can_stall) {
|
|
fsg_set_halt(fsg, fsg->bulk_out);
|
|
rc = halt_bulk_in_endpoint(fsg);
|
|
}
|
|
break;
|
|
|
|
/* All but the last buffer of data must have already been sent */
|
|
case DATA_DIR_TO_HOST:
|
|
if (fsg->data_size == 0)
|
|
; // Nothing to send
|
|
|
|
/* If there's no residue, simply send the last buffer */
|
|
else if (fsg->residue == 0) {
|
|
bh->inreq->zero = 0;
|
|
start_transfer(fsg, fsg->bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state);
|
|
fsg->next_buffhd_to_fill = bh->next;
|
|
}
|
|
|
|
/* There is a residue. For CB and CBI, simply mark the end
|
|
* of the data with a short packet. However, if we are
|
|
* allowed to stall, there was no data at all (residue ==
|
|
* data_size), and the command failed (invalid LUN or
|
|
* sense data is set), then halt the bulk-in endpoint
|
|
* instead. */
|
|
else if (!transport_is_bbb()) {
|
|
if (mod_data.can_stall &&
|
|
fsg->residue == fsg->data_size &&
|
|
(!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) {
|
|
bh->state = BUF_STATE_EMPTY;
|
|
rc = halt_bulk_in_endpoint(fsg);
|
|
} else {
|
|
bh->inreq->zero = 1;
|
|
start_transfer(fsg, fsg->bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state);
|
|
fsg->next_buffhd_to_fill = bh->next;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For Bulk-only, mark the end of the data with a short
|
|
* packet. If we are allowed to stall, halt the bulk-in
|
|
* endpoint. (Note: This violates the Bulk-Only Transport
|
|
* specification, which requires us to pad the data if we
|
|
* don't halt the endpoint. Presumably nobody will mind.)
|
|
*/
|
|
else {
|
|
bh->inreq->zero = 1;
|
|
start_transfer(fsg, fsg->bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state);
|
|
fsg->next_buffhd_to_fill = bh->next;
|
|
if (mod_data.can_stall)
|
|
rc = halt_bulk_in_endpoint(fsg);
|
|
}
|
|
break;
|
|
|
|
/* We have processed all we want from the data the host has sent.
|
|
* There may still be outstanding bulk-out requests. */
|
|
case DATA_DIR_FROM_HOST:
|
|
if (fsg->residue == 0)
|
|
; // Nothing to receive
|
|
|
|
/* Did the host stop sending unexpectedly early? */
|
|
else if (fsg->short_packet_received) {
|
|
raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
|
|
rc = -EINTR;
|
|
}
|
|
|
|
/* We haven't processed all the incoming data. Even though
|
|
* we may be allowed to stall, doing so would cause a race.
|
|
* The controller may already have ACK'ed all the remaining
|
|
* bulk-out packets, in which case the host wouldn't see a
|
|
* STALL. Not realizing the endpoint was halted, it wouldn't
|
|
* clear the halt -- leading to problems later on. */
|
|
#if 0
|
|
else if (mod_data.can_stall) {
|
|
fsg_set_halt(fsg, fsg->bulk_out);
|
|
raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
|
|
rc = -EINTR;
|
|
}
|
|
#endif
|
|
|
|
/* We can't stall. Read in the excess data and throw it
|
|
* all away. */
|
|
else
|
|
rc = throw_away_data(fsg);
|
|
break;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int send_status(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_lun *curlun = fsg->curlun;
|
|
struct fsg_buffhd *bh;
|
|
int rc;
|
|
u8 status = USB_STATUS_PASS;
|
|
u32 sd, sdinfo = 0;
|
|
|
|
/* Wait for the next buffer to become available */
|
|
bh = fsg->next_buffhd_to_fill;
|
|
while (bh->state != BUF_STATE_EMPTY) {
|
|
rc = sleep_thread(fsg);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
if (curlun) {
|
|
sd = curlun->sense_data;
|
|
sdinfo = curlun->sense_data_info;
|
|
} else if (fsg->bad_lun_okay)
|
|
sd = SS_NO_SENSE;
|
|
else
|
|
sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
|
|
|
|
if (fsg->phase_error) {
|
|
DBG(fsg, "sending phase-error status\n");
|
|
status = USB_STATUS_PHASE_ERROR;
|
|
sd = SS_INVALID_COMMAND;
|
|
} else if (sd != SS_NO_SENSE) {
|
|
DBG(fsg, "sending command-failure status\n");
|
|
status = USB_STATUS_FAIL;
|
|
VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
|
|
" info x%x\n",
|
|
SK(sd), ASC(sd), ASCQ(sd), sdinfo);
|
|
}
|
|
|
|
if (transport_is_bbb()) {
|
|
struct bulk_cs_wrap *csw = bh->buf;
|
|
|
|
/* Store and send the Bulk-only CSW */
|
|
csw->Signature = cpu_to_le32(USB_BULK_CS_SIG);
|
|
csw->Tag = fsg->tag;
|
|
csw->Residue = cpu_to_le32(fsg->residue);
|
|
csw->Status = status;
|
|
|
|
bh->inreq->length = USB_BULK_CS_WRAP_LEN;
|
|
bh->inreq->zero = 0;
|
|
start_transfer(fsg, fsg->bulk_in, bh->inreq,
|
|
&bh->inreq_busy, &bh->state);
|
|
|
|
} else if (mod_data.transport_type == USB_PR_CB) {
|
|
|
|
/* Control-Bulk transport has no status phase! */
|
|
return 0;
|
|
|
|
} else { // USB_PR_CBI
|
|
struct interrupt_data *buf = bh->buf;
|
|
|
|
/* Store and send the Interrupt data. UFI sends the ASC
|
|
* and ASCQ bytes. Everything else sends a Type (which
|
|
* is always 0) and the status Value. */
|
|
if (mod_data.protocol_type == USB_SC_UFI) {
|
|
buf->bType = ASC(sd);
|
|
buf->bValue = ASCQ(sd);
|
|
} else {
|
|
buf->bType = 0;
|
|
buf->bValue = status;
|
|
}
|
|
fsg->intreq->length = CBI_INTERRUPT_DATA_LEN;
|
|
|
|
fsg->intr_buffhd = bh; // Point to the right buffhd
|
|
fsg->intreq->buf = bh->inreq->buf;
|
|
fsg->intreq->context = bh;
|
|
start_transfer(fsg, fsg->intr_in, fsg->intreq,
|
|
&fsg->intreq_busy, &bh->state);
|
|
}
|
|
|
|
fsg->next_buffhd_to_fill = bh->next;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Check whether the command is properly formed and whether its data size
|
|
* and direction agree with the values we already have. */
|
|
static int check_command(struct fsg_dev *fsg, int cmnd_size,
|
|
enum data_direction data_dir, unsigned int mask,
|
|
int needs_medium, const char *name)
|
|
{
|
|
int i;
|
|
int lun = fsg->cmnd[1] >> 5;
|
|
static const char dirletter[4] = {'u', 'o', 'i', 'n'};
|
|
char hdlen[20];
|
|
struct fsg_lun *curlun;
|
|
|
|
/* Adjust the expected cmnd_size for protocol encapsulation padding.
|
|
* Transparent SCSI doesn't pad. */
|
|
if (protocol_is_scsi())
|
|
;
|
|
|
|
/* There's some disagreement as to whether RBC pads commands or not.
|
|
* We'll play it safe and accept either form. */
|
|
else if (mod_data.protocol_type == USB_SC_RBC) {
|
|
if (fsg->cmnd_size == 12)
|
|
cmnd_size = 12;
|
|
|
|
/* All the other protocols pad to 12 bytes */
|
|
} else
|
|
cmnd_size = 12;
|
|
|
|
hdlen[0] = 0;
|
|
if (fsg->data_dir != DATA_DIR_UNKNOWN)
|
|
sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
|
|
fsg->data_size);
|
|
VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
|
|
name, cmnd_size, dirletter[(int) data_dir],
|
|
fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
|
|
|
|
/* We can't reply at all until we know the correct data direction
|
|
* and size. */
|
|
if (fsg->data_size_from_cmnd == 0)
|
|
data_dir = DATA_DIR_NONE;
|
|
if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI
|
|
fsg->data_dir = data_dir;
|
|
fsg->data_size = fsg->data_size_from_cmnd;
|
|
|
|
} else { // Bulk-only
|
|
if (fsg->data_size < fsg->data_size_from_cmnd) {
|
|
|
|
/* Host data size < Device data size is a phase error.
|
|
* Carry out the command, but only transfer as much
|
|
* as we are allowed. */
|
|
fsg->data_size_from_cmnd = fsg->data_size;
|
|
fsg->phase_error = 1;
|
|
}
|
|
}
|
|
fsg->residue = fsg->usb_amount_left = fsg->data_size;
|
|
|
|
/* Conflicting data directions is a phase error */
|
|
if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
|
|
fsg->phase_error = 1;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Verify the length of the command itself */
|
|
if (cmnd_size != fsg->cmnd_size) {
|
|
|
|
/* Special case workaround: There are plenty of buggy SCSI
|
|
* implementations. Many have issues with cbw->Length
|
|
* field passing a wrong command size. For those cases we
|
|
* always try to work around the problem by using the length
|
|
* sent by the host side provided it is at least as large
|
|
* as the correct command length.
|
|
* Examples of such cases would be MS-Windows, which issues
|
|
* REQUEST SENSE with cbw->Length == 12 where it should
|
|
* be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
|
|
* REQUEST SENSE with cbw->Length == 10 where it should
|
|
* be 6 as well.
|
|
*/
|
|
if (cmnd_size <= fsg->cmnd_size) {
|
|
DBG(fsg, "%s is buggy! Expected length %d "
|
|
"but we got %d\n", name,
|
|
cmnd_size, fsg->cmnd_size);
|
|
cmnd_size = fsg->cmnd_size;
|
|
} else {
|
|
fsg->phase_error = 1;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Check that the LUN values are consistent */
|
|
if (transport_is_bbb()) {
|
|
if (fsg->lun != lun)
|
|
DBG(fsg, "using LUN %d from CBW, "
|
|
"not LUN %d from CDB\n",
|
|
fsg->lun, lun);
|
|
} else
|
|
fsg->lun = lun; // Use LUN from the command
|
|
|
|
/* Check the LUN */
|
|
if (fsg->lun < fsg->nluns) {
|
|
fsg->curlun = curlun = &fsg->luns[fsg->lun];
|
|
if (fsg->cmnd[0] != REQUEST_SENSE) {
|
|
curlun->sense_data = SS_NO_SENSE;
|
|
curlun->sense_data_info = 0;
|
|
curlun->info_valid = 0;
|
|
}
|
|
} else {
|
|
fsg->curlun = curlun = NULL;
|
|
fsg->bad_lun_okay = 0;
|
|
|
|
/* INQUIRY and REQUEST SENSE commands are explicitly allowed
|
|
* to use unsupported LUNs; all others may not. */
|
|
if (fsg->cmnd[0] != INQUIRY &&
|
|
fsg->cmnd[0] != REQUEST_SENSE) {
|
|
DBG(fsg, "unsupported LUN %d\n", fsg->lun);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* If a unit attention condition exists, only INQUIRY and
|
|
* REQUEST SENSE commands are allowed; anything else must fail. */
|
|
if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
|
|
fsg->cmnd[0] != INQUIRY &&
|
|
fsg->cmnd[0] != REQUEST_SENSE) {
|
|
curlun->sense_data = curlun->unit_attention_data;
|
|
curlun->unit_attention_data = SS_NO_SENSE;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check that only command bytes listed in the mask are non-zero */
|
|
fsg->cmnd[1] &= 0x1f; // Mask away the LUN
|
|
for (i = 1; i < cmnd_size; ++i) {
|
|
if (fsg->cmnd[i] && !(mask & (1 << i))) {
|
|
if (curlun)
|
|
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* If the medium isn't mounted and the command needs to access
|
|
* it, return an error. */
|
|
if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
|
|
curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int do_scsi_command(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_buffhd *bh;
|
|
int rc;
|
|
int reply = -EINVAL;
|
|
int i;
|
|
static char unknown[16];
|
|
|
|
dump_cdb(fsg);
|
|
|
|
/* Wait for the next buffer to become available for data or status */
|
|
bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
|
|
while (bh->state != BUF_STATE_EMPTY) {
|
|
rc = sleep_thread(fsg);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
fsg->phase_error = 0;
|
|
fsg->short_packet_received = 0;
|
|
|
|
down_read(&fsg->filesem); // We're using the backing file
|
|
switch (fsg->cmnd[0]) {
|
|
|
|
case INQUIRY:
|
|
fsg->data_size_from_cmnd = fsg->cmnd[4];
|
|
if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
|
|
(1<<4), 0,
|
|
"INQUIRY")) == 0)
|
|
reply = do_inquiry(fsg, bh);
|
|
break;
|
|
|
|
case MODE_SELECT:
|
|
fsg->data_size_from_cmnd = fsg->cmnd[4];
|
|
if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
|
|
(1<<1) | (1<<4), 0,
|
|
"MODE SELECT(6)")) == 0)
|
|
reply = do_mode_select(fsg, bh);
|
|
break;
|
|
|
|
case MODE_SELECT_10:
|
|
fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
|
|
(1<<1) | (3<<7), 0,
|
|
"MODE SELECT(10)")) == 0)
|
|
reply = do_mode_select(fsg, bh);
|
|
break;
|
|
|
|
case MODE_SENSE:
|
|
fsg->data_size_from_cmnd = fsg->cmnd[4];
|
|
if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
|
|
(1<<1) | (1<<2) | (1<<4), 0,
|
|
"MODE SENSE(6)")) == 0)
|
|
reply = do_mode_sense(fsg, bh);
|
|
break;
|
|
|
|
case MODE_SENSE_10:
|
|
fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
|
|
(1<<1) | (1<<2) | (3<<7), 0,
|
|
"MODE SENSE(10)")) == 0)
|
|
reply = do_mode_sense(fsg, bh);
|
|
break;
|
|
|
|
case ALLOW_MEDIUM_REMOVAL:
|
|
fsg->data_size_from_cmnd = 0;
|
|
if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
|
|
(1<<4), 0,
|
|
"PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
|
|
reply = do_prevent_allow(fsg);
|
|
break;
|
|
|
|
case READ_6:
|
|
i = fsg->cmnd[4];
|
|
fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
|
|
if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
|
|
(7<<1) | (1<<4), 1,
|
|
"READ(6)")) == 0)
|
|
reply = do_read(fsg);
|
|
break;
|
|
|
|
case READ_10:
|
|
fsg->data_size_from_cmnd =
|
|
get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
|
|
(1<<1) | (0xf<<2) | (3<<7), 1,
|
|
"READ(10)")) == 0)
|
|
reply = do_read(fsg);
|
|
break;
|
|
|
|
case READ_12:
|
|
fsg->data_size_from_cmnd =
|
|
get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
|
|
if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
|
|
(1<<1) | (0xf<<2) | (0xf<<6), 1,
|
|
"READ(12)")) == 0)
|
|
reply = do_read(fsg);
|
|
break;
|
|
|
|
case READ_CAPACITY:
|
|
fsg->data_size_from_cmnd = 8;
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
|
|
(0xf<<2) | (1<<8), 1,
|
|
"READ CAPACITY")) == 0)
|
|
reply = do_read_capacity(fsg, bh);
|
|
break;
|
|
|
|
case READ_HEADER:
|
|
if (!mod_data.cdrom)
|
|
goto unknown_cmnd;
|
|
fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
|
|
(3<<7) | (0x1f<<1), 1,
|
|
"READ HEADER")) == 0)
|
|
reply = do_read_header(fsg, bh);
|
|
break;
|
|
|
|
case READ_TOC:
|
|
if (!mod_data.cdrom)
|
|
goto unknown_cmnd;
|
|
fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
|
|
(7<<6) | (1<<1), 1,
|
|
"READ TOC")) == 0)
|
|
reply = do_read_toc(fsg, bh);
|
|
break;
|
|
|
|
case READ_FORMAT_CAPACITIES:
|
|
fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
|
|
(3<<7), 1,
|
|
"READ FORMAT CAPACITIES")) == 0)
|
|
reply = do_read_format_capacities(fsg, bh);
|
|
break;
|
|
|
|
case REQUEST_SENSE:
|
|
fsg->data_size_from_cmnd = fsg->cmnd[4];
|
|
if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
|
|
(1<<4), 0,
|
|
"REQUEST SENSE")) == 0)
|
|
reply = do_request_sense(fsg, bh);
|
|
break;
|
|
|
|
case START_STOP:
|
|
fsg->data_size_from_cmnd = 0;
|
|
if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
|
|
(1<<1) | (1<<4), 0,
|
|
"START-STOP UNIT")) == 0)
|
|
reply = do_start_stop(fsg);
|
|
break;
|
|
|
|
case SYNCHRONIZE_CACHE:
|
|
fsg->data_size_from_cmnd = 0;
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
|
|
(0xf<<2) | (3<<7), 1,
|
|
"SYNCHRONIZE CACHE")) == 0)
|
|
reply = do_synchronize_cache(fsg);
|
|
break;
|
|
|
|
case TEST_UNIT_READY:
|
|
fsg->data_size_from_cmnd = 0;
|
|
reply = check_command(fsg, 6, DATA_DIR_NONE,
|
|
0, 1,
|
|
"TEST UNIT READY");
|
|
break;
|
|
|
|
/* Although optional, this command is used by MS-Windows. We
|
|
* support a minimal version: BytChk must be 0. */
|
|
case VERIFY:
|
|
fsg->data_size_from_cmnd = 0;
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
|
|
(1<<1) | (0xf<<2) | (3<<7), 1,
|
|
"VERIFY")) == 0)
|
|
reply = do_verify(fsg);
|
|
break;
|
|
|
|
case WRITE_6:
|
|
i = fsg->cmnd[4];
|
|
fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
|
|
if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
|
|
(7<<1) | (1<<4), 1,
|
|
"WRITE(6)")) == 0)
|
|
reply = do_write(fsg);
|
|
break;
|
|
|
|
case WRITE_10:
|
|
fsg->data_size_from_cmnd =
|
|
get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
|
|
if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
|
|
(1<<1) | (0xf<<2) | (3<<7), 1,
|
|
"WRITE(10)")) == 0)
|
|
reply = do_write(fsg);
|
|
break;
|
|
|
|
case WRITE_12:
|
|
fsg->data_size_from_cmnd =
|
|
get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
|
|
if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
|
|
(1<<1) | (0xf<<2) | (0xf<<6), 1,
|
|
"WRITE(12)")) == 0)
|
|
reply = do_write(fsg);
|
|
break;
|
|
|
|
/* Some mandatory commands that we recognize but don't implement.
|
|
* They don't mean much in this setting. It's left as an exercise
|
|
* for anyone interested to implement RESERVE and RELEASE in terms
|
|
* of Posix locks. */
|
|
case FORMAT_UNIT:
|
|
case RELEASE:
|
|
case RESERVE:
|
|
case SEND_DIAGNOSTIC:
|
|
// Fall through
|
|
|
|
default:
|
|
unknown_cmnd:
|
|
fsg->data_size_from_cmnd = 0;
|
|
sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
|
|
if ((reply = check_command(fsg, fsg->cmnd_size,
|
|
DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
|
|
fsg->curlun->sense_data = SS_INVALID_COMMAND;
|
|
reply = -EINVAL;
|
|
}
|
|
break;
|
|
}
|
|
up_read(&fsg->filesem);
|
|
|
|
if (reply == -EINTR || signal_pending(current))
|
|
return -EINTR;
|
|
|
|
/* Set up the single reply buffer for finish_reply() */
|
|
if (reply == -EINVAL)
|
|
reply = 0; // Error reply length
|
|
if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
|
|
reply = min((u32) reply, fsg->data_size_from_cmnd);
|
|
bh->inreq->length = reply;
|
|
bh->state = BUF_STATE_FULL;
|
|
fsg->residue -= reply;
|
|
} // Otherwise it's already set
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
|
|
{
|
|
struct usb_request *req = bh->outreq;
|
|
struct fsg_bulk_cb_wrap *cbw = req->buf;
|
|
|
|
/* Was this a real packet? Should it be ignored? */
|
|
if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
|
|
return -EINVAL;
|
|
|
|
/* Is the CBW valid? */
|
|
if (req->actual != USB_BULK_CB_WRAP_LEN ||
|
|
cbw->Signature != cpu_to_le32(
|
|
USB_BULK_CB_SIG)) {
|
|
DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
|
|
req->actual,
|
|
le32_to_cpu(cbw->Signature));
|
|
|
|
/* The Bulk-only spec says we MUST stall the IN endpoint
|
|
* (6.6.1), so it's unavoidable. It also says we must
|
|
* retain this state until the next reset, but there's
|
|
* no way to tell the controller driver it should ignore
|
|
* Clear-Feature(HALT) requests.
|
|
*
|
|
* We aren't required to halt the OUT endpoint; instead
|
|
* we can simply accept and discard any data received
|
|
* until the next reset. */
|
|
wedge_bulk_in_endpoint(fsg);
|
|
set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Is the CBW meaningful? */
|
|
if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG ||
|
|
cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
|
|
DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
|
|
"cmdlen %u\n",
|
|
cbw->Lun, cbw->Flags, cbw->Length);
|
|
|
|
/* We can do anything we want here, so let's stall the
|
|
* bulk pipes if we are allowed to. */
|
|
if (mod_data.can_stall) {
|
|
fsg_set_halt(fsg, fsg->bulk_out);
|
|
halt_bulk_in_endpoint(fsg);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Save the command for later */
|
|
fsg->cmnd_size = cbw->Length;
|
|
memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
|
|
if (cbw->Flags & USB_BULK_IN_FLAG)
|
|
fsg->data_dir = DATA_DIR_TO_HOST;
|
|
else
|
|
fsg->data_dir = DATA_DIR_FROM_HOST;
|
|
fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
|
|
if (fsg->data_size == 0)
|
|
fsg->data_dir = DATA_DIR_NONE;
|
|
fsg->lun = cbw->Lun;
|
|
fsg->tag = cbw->Tag;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int get_next_command(struct fsg_dev *fsg)
|
|
{
|
|
struct fsg_buffhd *bh;
|
|
int rc = 0;
|
|
|
|
if (transport_is_bbb()) {
|
|
|
|
/* Wait for the next buffer to become available */
|
|
bh = fsg->next_buffhd_to_fill;
|
|
while (bh->state != BUF_STATE_EMPTY) {
|
|
rc = sleep_thread(fsg);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
/* Queue a request to read a Bulk-only CBW */
|
|
set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
|
|
start_transfer(fsg, fsg->bulk_out, bh->outreq,
|
|
&bh->outreq_busy, &bh->state);
|
|
|
|
/* We will drain the buffer in software, which means we
|
|
* can reuse it for the next filling. No need to advance
|
|
* next_buffhd_to_fill. */
|
|
|
|
/* Wait for the CBW to arrive */
|
|
while (bh->state != BUF_STATE_FULL) {
|
|
rc = sleep_thread(fsg);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
smp_rmb();
|
|
rc = received_cbw(fsg, bh);
|
|
bh->state = BUF_STATE_EMPTY;
|
|
|
|
} else { // USB_PR_CB or USB_PR_CBI
|
|
|
|
/* Wait for the next command to arrive */
|
|
while (fsg->cbbuf_cmnd_size == 0) {
|
|
rc = sleep_thread(fsg);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
/* Is the previous status interrupt request still busy?
|
|
* The host is allowed to skip reading the status,
|
|
* so we must cancel it. */
|
|
if (fsg->intreq_busy)
|
|
usb_ep_dequeue(fsg->intr_in, fsg->intreq);
|
|
|
|
/* Copy the command and mark the buffer empty */
|
|
fsg->data_dir = DATA_DIR_UNKNOWN;
|
|
spin_lock_irq(&fsg->lock);
|
|
fsg->cmnd_size = fsg->cbbuf_cmnd_size;
|
|
memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
|
|
fsg->cbbuf_cmnd_size = 0;
|
|
spin_unlock_irq(&fsg->lock);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
|
|
const struct usb_endpoint_descriptor *d)
|
|
{
|
|
int rc;
|
|
|
|
ep->driver_data = fsg;
|
|
ep->desc = d;
|
|
rc = usb_ep_enable(ep);
|
|
if (rc)
|
|
ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
|
|
return rc;
|
|
}
|
|
|
|
static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
|
|
struct usb_request **preq)
|
|
{
|
|
*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
|
|
if (*preq)
|
|
return 0;
|
|
ERROR(fsg, "can't allocate request for %s\n", ep->name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Reset interface setting and re-init endpoint state (toggle etc).
|
|
* Call with altsetting < 0 to disable the interface. The only other
|
|
* available altsetting is 0, which enables the interface.
|
|
*/
|
|
static int do_set_interface(struct fsg_dev *fsg, int altsetting)
|
|
{
|
|
int rc = 0;
|
|
int i;
|
|
const struct usb_endpoint_descriptor *d;
|
|
|
|
if (fsg->running)
|
|
DBG(fsg, "reset interface\n");
|
|
|
|
reset:
|
|
/* Deallocate the requests */
|
|
for (i = 0; i < fsg_num_buffers; ++i) {
|
|
struct fsg_buffhd *bh = &fsg->buffhds[i];
|
|
|
|
if (bh->inreq) {
|
|
usb_ep_free_request(fsg->bulk_in, bh->inreq);
|
|
bh->inreq = NULL;
|
|
}
|
|
if (bh->outreq) {
|
|
usb_ep_free_request(fsg->bulk_out, bh->outreq);
|
|
bh->outreq = NULL;
|
|
}
|
|
}
|
|
if (fsg->intreq) {
|
|
usb_ep_free_request(fsg->intr_in, fsg->intreq);
|
|
fsg->intreq = NULL;
|
|
}
|
|
|
|
/* Disable the endpoints */
|
|
if (fsg->bulk_in_enabled) {
|
|
usb_ep_disable(fsg->bulk_in);
|
|
fsg->bulk_in_enabled = 0;
|
|
}
|
|
if (fsg->bulk_out_enabled) {
|
|
usb_ep_disable(fsg->bulk_out);
|
|
fsg->bulk_out_enabled = 0;
|
|
}
|
|
if (fsg->intr_in_enabled) {
|
|
usb_ep_disable(fsg->intr_in);
|
|
fsg->intr_in_enabled = 0;
|
|
}
|
|
|
|
fsg->running = 0;
|
|
if (altsetting < 0 || rc != 0)
|
|
return rc;
|
|
|
|
DBG(fsg, "set interface %d\n", altsetting);
|
|
|
|
/* Enable the endpoints */
|
|
d = fsg_ep_desc(fsg->gadget,
|
|
&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
|
|
&fsg_ss_bulk_in_desc);
|
|
if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
|
|
goto reset;
|
|
fsg->bulk_in_enabled = 1;
|
|
|
|
d = fsg_ep_desc(fsg->gadget,
|
|
&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
|
|
&fsg_ss_bulk_out_desc);
|
|
if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
|
|
goto reset;
|
|
fsg->bulk_out_enabled = 1;
|
|
fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
|
|
clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
|
|
|
|
if (transport_is_cbi()) {
|
|
d = fsg_ep_desc(fsg->gadget,
|
|
&fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
|
|
&fsg_ss_intr_in_desc);
|
|
if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
|
|
goto reset;
|
|
fsg->intr_in_enabled = 1;
|
|
}
|
|
|
|
/* Allocate the requests */
|
|
for (i = 0; i < fsg_num_buffers; ++i) {
|
|
struct fsg_buffhd *bh = &fsg->buffhds[i];
|
|
|
|
if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
|
|
goto reset;
|
|
if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
|
|
goto reset;
|
|
bh->inreq->buf = bh->outreq->buf = bh->buf;
|
|
bh->inreq->context = bh->outreq->context = bh;
|
|
bh->inreq->complete = bulk_in_complete;
|
|
bh->outreq->complete = bulk_out_complete;
|
|
}
|
|
if (transport_is_cbi()) {
|
|
if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0)
|
|
goto reset;
|
|
fsg->intreq->complete = intr_in_complete;
|
|
}
|
|
|
|
fsg->running = 1;
|
|
for (i = 0; i < fsg->nluns; ++i)
|
|
fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*
|
|
* Change our operational configuration. This code must agree with the code
|
|
* that returns config descriptors, and with interface altsetting code.
|
|
*
|
|
* It's also responsible for power management interactions. Some
|
|
* configurations might not work with our current power sources.
|
|
* For now we just assume the gadget is always self-powered.
|
|
*/
|
|
static int do_set_config(struct fsg_dev *fsg, u8 new_config)
|
|
{
|
|
int rc = 0;
|
|
|
|
/* Disable the single interface */
|
|
if (fsg->config != 0) {
|
|
DBG(fsg, "reset config\n");
|
|
fsg->config = 0;
|
|
rc = do_set_interface(fsg, -1);
|
|
}
|
|
|
|
/* Enable the interface */
|
|
if (new_config != 0) {
|
|
fsg->config = new_config;
|
|
if ((rc = do_set_interface(fsg, 0)) != 0)
|
|
fsg->config = 0; // Reset on errors
|
|
else
|
|
INFO(fsg, "%s config #%d\n",
|
|
usb_speed_string(fsg->gadget->speed),
|
|
fsg->config);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void handle_exception(struct fsg_dev *fsg)
|
|
{
|
|
siginfo_t info;
|
|
int sig;
|
|
int i;
|
|
int num_active;
|
|
struct fsg_buffhd *bh;
|
|
enum fsg_state old_state;
|
|
u8 new_config;
|
|
struct fsg_lun *curlun;
|
|
unsigned int exception_req_tag;
|
|
int rc;
|
|
|
|
/* Clear the existing signals. Anything but SIGUSR1 is converted
|
|
* into a high-priority EXIT exception. */
|
|
for (;;) {
|
|
sig = dequeue_signal_lock(current, ¤t->blocked, &info);
|
|
if (!sig)
|
|
break;
|
|
if (sig != SIGUSR1) {
|
|
if (fsg->state < FSG_STATE_EXIT)
|
|
DBG(fsg, "Main thread exiting on signal\n");
|
|
raise_exception(fsg, FSG_STATE_EXIT);
|
|
}
|
|
}
|
|
|
|
/* Cancel all the pending transfers */
|
|
if (fsg->intreq_busy)
|
|
usb_ep_dequeue(fsg->intr_in, fsg->intreq);
|
|
for (i = 0; i < fsg_num_buffers; ++i) {
|
|
bh = &fsg->buffhds[i];
|
|
if (bh->inreq_busy)
|
|
usb_ep_dequeue(fsg->bulk_in, bh->inreq);
|
|
if (bh->outreq_busy)
|
|
usb_ep_dequeue(fsg->bulk_out, bh->outreq);
|
|
}
|
|
|
|
/* Wait until everything is idle */
|
|
for (;;) {
|
|
num_active = fsg->intreq_busy;
|
|
for (i = 0; i < fsg_num_buffers; ++i) {
|
|
bh = &fsg->buffhds[i];
|
|
num_active += bh->inreq_busy + bh->outreq_busy;
|
|
}
|
|
if (num_active == 0)
|
|
break;
|
|
if (sleep_thread(fsg))
|
|
return;
|
|
}
|
|
|
|
/* Clear out the controller's fifos */
|
|
if (fsg->bulk_in_enabled)
|
|
usb_ep_fifo_flush(fsg->bulk_in);
|
|
if (fsg->bulk_out_enabled)
|
|
usb_ep_fifo_flush(fsg->bulk_out);
|
|
if (fsg->intr_in_enabled)
|
|
usb_ep_fifo_flush(fsg->intr_in);
|
|
|
|
/* Reset the I/O buffer states and pointers, the SCSI
|
|
* state, and the exception. Then invoke the handler. */
|
|
spin_lock_irq(&fsg->lock);
|
|
|
|
for (i = 0; i < fsg_num_buffers; ++i) {
|
|
bh = &fsg->buffhds[i];
|
|
bh->state = BUF_STATE_EMPTY;
|
|
}
|
|
fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
|
|
&fsg->buffhds[0];
|
|
|
|
exception_req_tag = fsg->exception_req_tag;
|
|
new_config = fsg->new_config;
|
|
old_state = fsg->state;
|
|
|
|
if (old_state == FSG_STATE_ABORT_BULK_OUT)
|
|
fsg->state = FSG_STATE_STATUS_PHASE;
|
|
else {
|
|
for (i = 0; i < fsg->nluns; ++i) {
|
|
curlun = &fsg->luns[i];
|
|
curlun->prevent_medium_removal = 0;
|
|
curlun->sense_data = curlun->unit_attention_data =
|
|
SS_NO_SENSE;
|
|
curlun->sense_data_info = 0;
|
|
curlun->info_valid = 0;
|
|
}
|
|
fsg->state = FSG_STATE_IDLE;
|
|
}
|
|
spin_unlock_irq(&fsg->lock);
|
|
|
|
/* Carry out any extra actions required for the exception */
|
|
switch (old_state) {
|
|
default:
|
|
break;
|
|
|
|
case FSG_STATE_ABORT_BULK_OUT:
|
|
send_status(fsg);
|
|
spin_lock_irq(&fsg->lock);
|
|
if (fsg->state == FSG_STATE_STATUS_PHASE)
|
|
fsg->state = FSG_STATE_IDLE;
|
|
spin_unlock_irq(&fsg->lock);
|
|
break;
|
|
|
|
case FSG_STATE_RESET:
|
|
/* In case we were forced against our will to halt a
|
|
* bulk endpoint, clear the halt now. (The SuperH UDC
|
|
* requires this.) */
|
|
if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
|
|
usb_ep_clear_halt(fsg->bulk_in);
|
|
|
|
if (transport_is_bbb()) {
|
|
if (fsg->ep0_req_tag == exception_req_tag)
|
|
ep0_queue(fsg); // Complete the status stage
|
|
|
|
} else if (transport_is_cbi())
|
|
send_status(fsg); // Status by interrupt pipe
|
|
|
|
/* Technically this should go here, but it would only be
|
|
* a waste of time. Ditto for the INTERFACE_CHANGE and
|
|
* CONFIG_CHANGE cases. */
|
|
// for (i = 0; i < fsg->nluns; ++i)
|
|
// fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
|
|
break;
|
|
|
|
case FSG_STATE_INTERFACE_CHANGE:
|
|
rc = do_set_interface(fsg, 0);
|
|
if (fsg->ep0_req_tag != exception_req_tag)
|
|
break;
|
|
if (rc != 0) // STALL on errors
|
|
fsg_set_halt(fsg, fsg->ep0);
|
|
else // Complete the status stage
|
|
ep0_queue(fsg);
|
|
break;
|
|
|
|
case FSG_STATE_CONFIG_CHANGE:
|
|
rc = do_set_config(fsg, new_config);
|
|
if (fsg->ep0_req_tag != exception_req_tag)
|
|
break;
|
|
if (rc != 0) // STALL on errors
|
|
fsg_set_halt(fsg, fsg->ep0);
|
|
else // Complete the status stage
|
|
ep0_queue(fsg);
|
|
break;
|
|
|
|
case FSG_STATE_DISCONNECT:
|
|
for (i = 0; i < fsg->nluns; ++i)
|
|
fsg_lun_fsync_sub(fsg->luns + i);
|
|
do_set_config(fsg, 0); // Unconfigured state
|
|
break;
|
|
|
|
case FSG_STATE_EXIT:
|
|
case FSG_STATE_TERMINATED:
|
|
do_set_config(fsg, 0); // Free resources
|
|
spin_lock_irq(&fsg->lock);
|
|
fsg->state = FSG_STATE_TERMINATED; // Stop the thread
|
|
spin_unlock_irq(&fsg->lock);
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int fsg_main_thread(void *fsg_)
|
|
{
|
|
struct fsg_dev *fsg = fsg_;
|
|
|
|
/* Allow the thread to be killed by a signal, but set the signal mask
|
|
* to block everything but INT, TERM, KILL, and USR1. */
|
|
allow_signal(SIGINT);
|
|
allow_signal(SIGTERM);
|
|
allow_signal(SIGKILL);
|
|
allow_signal(SIGUSR1);
|
|
|
|
/* Allow the thread to be frozen */
|
|
set_freezable();
|
|
|
|
/* Arrange for userspace references to be interpreted as kernel
|
|
* pointers. That way we can pass a kernel pointer to a routine
|
|
* that expects a __user pointer and it will work okay. */
|
|
set_fs(get_ds());
|
|
|
|
/* The main loop */
|
|
while (fsg->state != FSG_STATE_TERMINATED) {
|
|
if (exception_in_progress(fsg) || signal_pending(current)) {
|
|
handle_exception(fsg);
|
|
continue;
|
|
}
|
|
|
|
if (!fsg->running) {
|
|
sleep_thread(fsg);
|
|
continue;
|
|
}
|
|
|
|
if (get_next_command(fsg))
|
|
continue;
|
|
|
|
spin_lock_irq(&fsg->lock);
|
|
if (!exception_in_progress(fsg))
|
|
fsg->state = FSG_STATE_DATA_PHASE;
|
|
spin_unlock_irq(&fsg->lock);
|
|
|
|
if (do_scsi_command(fsg) || finish_reply(fsg))
|
|
continue;
|
|
|
|
spin_lock_irq(&fsg->lock);
|
|
if (!exception_in_progress(fsg))
|
|
fsg->state = FSG_STATE_STATUS_PHASE;
|
|
spin_unlock_irq(&fsg->lock);
|
|
|
|
if (send_status(fsg))
|
|
continue;
|
|
|
|
spin_lock_irq(&fsg->lock);
|
|
if (!exception_in_progress(fsg))
|
|
fsg->state = FSG_STATE_IDLE;
|
|
spin_unlock_irq(&fsg->lock);
|
|
}
|
|
|
|
spin_lock_irq(&fsg->lock);
|
|
fsg->thread_task = NULL;
|
|
spin_unlock_irq(&fsg->lock);
|
|
|
|
/* If we are exiting because of a signal, unregister the
|
|
* gadget driver. */
|
|
if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
|
|
usb_gadget_unregister_driver(&fsg_driver);
|
|
|
|
/* Let the unbind and cleanup routines know the thread has exited */
|
|
complete_and_exit(&fsg->thread_notifier, 0);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
/* The write permissions and store_xxx pointers are set in fsg_bind() */
|
|
static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
|
|
static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
|
|
static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void fsg_release(struct kref *ref)
|
|
{
|
|
struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref);
|
|
|
|
kfree(fsg->luns);
|
|
kfree(fsg);
|
|
}
|
|
|
|
static void lun_release(struct device *dev)
|
|
{
|
|
struct rw_semaphore *filesem = dev_get_drvdata(dev);
|
|
struct fsg_dev *fsg =
|
|
container_of(filesem, struct fsg_dev, filesem);
|
|
|
|
kref_put(&fsg->ref, fsg_release);
|
|
}
|
|
|
|
static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
|
|
{
|
|
struct fsg_dev *fsg = get_gadget_data(gadget);
|
|
int i;
|
|
struct fsg_lun *curlun;
|
|
struct usb_request *req = fsg->ep0req;
|
|
|
|
DBG(fsg, "unbind\n");
|
|
clear_bit(REGISTERED, &fsg->atomic_bitflags);
|
|
|
|
/* If the thread isn't already dead, tell it to exit now */
|
|
if (fsg->state != FSG_STATE_TERMINATED) {
|
|
raise_exception(fsg, FSG_STATE_EXIT);
|
|
wait_for_completion(&fsg->thread_notifier);
|
|
|
|
/* The cleanup routine waits for this completion also */
|
|
complete(&fsg->thread_notifier);
|
|
}
|
|
|
|
/* Unregister the sysfs attribute files and the LUNs */
|
|
for (i = 0; i < fsg->nluns; ++i) {
|
|
curlun = &fsg->luns[i];
|
|
if (curlun->registered) {
|
|
device_remove_file(&curlun->dev, &dev_attr_nofua);
|
|
device_remove_file(&curlun->dev, &dev_attr_ro);
|
|
device_remove_file(&curlun->dev, &dev_attr_file);
|
|
fsg_lun_close(curlun);
|
|
device_unregister(&curlun->dev);
|
|
curlun->registered = 0;
|
|
}
|
|
}
|
|
|
|
/* Free the data buffers */
|
|
for (i = 0; i < fsg_num_buffers; ++i)
|
|
kfree(fsg->buffhds[i].buf);
|
|
|
|
/* Free the request and buffer for endpoint 0 */
|
|
if (req) {
|
|
kfree(req->buf);
|
|
usb_ep_free_request(fsg->ep0, req);
|
|
}
|
|
|
|
set_gadget_data(gadget, NULL);
|
|
}
|
|
|
|
|
|
static int __init check_parameters(struct fsg_dev *fsg)
|
|
{
|
|
int prot;
|
|
int gcnum;
|
|
|
|
/* Store the default values */
|
|
mod_data.transport_type = USB_PR_BULK;
|
|
mod_data.transport_name = "Bulk-only";
|
|
mod_data.protocol_type = USB_SC_SCSI;
|
|
mod_data.protocol_name = "Transparent SCSI";
|
|
|
|
/* Some peripheral controllers are known not to be able to
|
|
* halt bulk endpoints correctly. If one of them is present,
|
|
* disable stalls.
|
|
*/
|
|
if (gadget_is_at91(fsg->gadget))
|
|
mod_data.can_stall = 0;
|
|
|
|
if (mod_data.release == 0xffff) { // Parameter wasn't set
|
|
gcnum = usb_gadget_controller_number(fsg->gadget);
|
|
if (gcnum >= 0)
|
|
mod_data.release = 0x0300 + gcnum;
|
|
else {
|
|
WARNING(fsg, "controller '%s' not recognized\n",
|
|
fsg->gadget->name);
|
|
mod_data.release = 0x0399;
|
|
}
|
|
}
|
|
|
|
prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
|
|
|
|
#ifdef CONFIG_USB_FILE_STORAGE_TEST
|
|
if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) {
|
|
; // Use default setting
|
|
} else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) {
|
|
mod_data.transport_type = USB_PR_CB;
|
|
mod_data.transport_name = "Control-Bulk";
|
|
} else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) {
|
|
mod_data.transport_type = USB_PR_CBI;
|
|
mod_data.transport_name = "Control-Bulk-Interrupt";
|
|
} else {
|
|
ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 ||
|
|
prot == USB_SC_SCSI) {
|
|
; // Use default setting
|
|
} else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 ||
|
|
prot == USB_SC_RBC) {
|
|
mod_data.protocol_type = USB_SC_RBC;
|
|
mod_data.protocol_name = "RBC";
|
|
} else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 ||
|
|
strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 ||
|
|
prot == USB_SC_8020) {
|
|
mod_data.protocol_type = USB_SC_8020;
|
|
mod_data.protocol_name = "8020i (ATAPI)";
|
|
} else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 ||
|
|
prot == USB_SC_QIC) {
|
|
mod_data.protocol_type = USB_SC_QIC;
|
|
mod_data.protocol_name = "QIC-157";
|
|
} else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 ||
|
|
prot == USB_SC_UFI) {
|
|
mod_data.protocol_type = USB_SC_UFI;
|
|
mod_data.protocol_name = "UFI";
|
|
} else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 ||
|
|
prot == USB_SC_8070) {
|
|
mod_data.protocol_type = USB_SC_8070;
|
|
mod_data.protocol_name = "8070i";
|
|
} else {
|
|
ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mod_data.buflen &= PAGE_CACHE_MASK;
|
|
if (mod_data.buflen <= 0) {
|
|
ERROR(fsg, "invalid buflen\n");
|
|
return -ETOOSMALL;
|
|
}
|
|
|
|
#endif /* CONFIG_USB_FILE_STORAGE_TEST */
|
|
|
|
/* Serial string handling.
|
|
* On a real device, the serial string would be loaded
|
|
* from permanent storage. */
|
|
if (mod_data.serial) {
|
|
const char *ch;
|
|
unsigned len = 0;
|
|
|
|
/* Sanity check :
|
|
* The CB[I] specification limits the serial string to
|
|
* 12 uppercase hexadecimal characters.
|
|
* BBB need at least 12 uppercase hexadecimal characters,
|
|
* with a maximum of 126. */
|
|
for (ch = mod_data.serial; *ch; ++ch) {
|
|
++len;
|
|
if ((*ch < '0' || *ch > '9') &&
|
|
(*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
|
|
WARNING(fsg,
|
|
"Invalid serial string character: %c\n",
|
|
*ch);
|
|
goto no_serial;
|
|
}
|
|
}
|
|
if (len > 126 ||
|
|
(mod_data.transport_type == USB_PR_BULK && len < 12) ||
|
|
(mod_data.transport_type != USB_PR_BULK && len > 12)) {
|
|
WARNING(fsg, "Invalid serial string length!\n");
|
|
goto no_serial;
|
|
}
|
|
fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
|
|
} else {
|
|
WARNING(fsg, "No serial-number string provided!\n");
|
|
no_serial:
|
|
device_desc.iSerialNumber = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int __init fsg_bind(struct usb_gadget *gadget)
|
|
{
|
|
struct fsg_dev *fsg = the_fsg;
|
|
int rc;
|
|
int i;
|
|
struct fsg_lun *curlun;
|
|
struct usb_ep *ep;
|
|
struct usb_request *req;
|
|
char *pathbuf, *p;
|
|
|
|
fsg->gadget = gadget;
|
|
set_gadget_data(gadget, fsg);
|
|
fsg->ep0 = gadget->ep0;
|
|
fsg->ep0->driver_data = fsg;
|
|
|
|
if ((rc = check_parameters(fsg)) != 0)
|
|
goto out;
|
|
|
|
if (mod_data.removable) { // Enable the store_xxx attributes
|
|
dev_attr_file.attr.mode = 0644;
|
|
dev_attr_file.store = fsg_store_file;
|
|
if (!mod_data.cdrom) {
|
|
dev_attr_ro.attr.mode = 0644;
|
|
dev_attr_ro.store = fsg_store_ro;
|
|
}
|
|
}
|
|
|
|
/* Only for removable media? */
|
|
dev_attr_nofua.attr.mode = 0644;
|
|
dev_attr_nofua.store = fsg_store_nofua;
|
|
|
|
/* Find out how many LUNs there should be */
|
|
i = mod_data.nluns;
|
|
if (i == 0)
|
|
i = max(mod_data.num_filenames, 1u);
|
|
if (i > FSG_MAX_LUNS) {
|
|
ERROR(fsg, "invalid number of LUNs: %d\n", i);
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* Create the LUNs, open their backing files, and register the
|
|
* LUN devices in sysfs. */
|
|
fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL);
|
|
if (!fsg->luns) {
|
|
rc = -ENOMEM;
|
|
goto out;
|
|
}
|
|
fsg->nluns = i;
|
|
|
|
for (i = 0; i < fsg->nluns; ++i) {
|
|
curlun = &fsg->luns[i];
|
|
curlun->cdrom = !!mod_data.cdrom;
|
|
curlun->ro = mod_data.cdrom || mod_data.ro[i];
|
|
curlun->initially_ro = curlun->ro;
|
|
curlun->removable = mod_data.removable;
|
|
curlun->nofua = mod_data.nofua[i];
|
|
curlun->dev.release = lun_release;
|
|
curlun->dev.parent = &gadget->dev;
|
|
curlun->dev.driver = &fsg_driver.driver;
|
|
dev_set_drvdata(&curlun->dev, &fsg->filesem);
|
|
dev_set_name(&curlun->dev,"%s-lun%d",
|
|
dev_name(&gadget->dev), i);
|
|
|
|
kref_get(&fsg->ref);
|
|
rc = device_register(&curlun->dev);
|
|
if (rc) {
|
|
INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
|
|
put_device(&curlun->dev);
|
|
goto out;
|
|
}
|
|
curlun->registered = 1;
|
|
|
|
rc = device_create_file(&curlun->dev, &dev_attr_ro);
|
|
if (rc)
|
|
goto out;
|
|
rc = device_create_file(&curlun->dev, &dev_attr_nofua);
|
|
if (rc)
|
|
goto out;
|
|
rc = device_create_file(&curlun->dev, &dev_attr_file);
|
|
if (rc)
|
|
goto out;
|
|
|
|
if (mod_data.file[i] && *mod_data.file[i]) {
|
|
rc = fsg_lun_open(curlun, mod_data.file[i]);
|
|
if (rc)
|
|
goto out;
|
|
} else if (!mod_data.removable) {
|
|
ERROR(fsg, "no file given for LUN%d\n", i);
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Find all the endpoints we will use */
|
|
usb_ep_autoconfig_reset(gadget);
|
|
ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
|
|
if (!ep)
|
|
goto autoconf_fail;
|
|
ep->driver_data = fsg; // claim the endpoint
|
|
fsg->bulk_in = ep;
|
|
|
|
ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
|
|
if (!ep)
|
|
goto autoconf_fail;
|
|
ep->driver_data = fsg; // claim the endpoint
|
|
fsg->bulk_out = ep;
|
|
|
|
if (transport_is_cbi()) {
|
|
ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc);
|
|
if (!ep)
|
|
goto autoconf_fail;
|
|
ep->driver_data = fsg; // claim the endpoint
|
|
fsg->intr_in = ep;
|
|
}
|
|
|
|
/* Fix up the descriptors */
|
|
device_desc.idVendor = cpu_to_le16(mod_data.vendor);
|
|
device_desc.idProduct = cpu_to_le16(mod_data.product);
|
|
device_desc.bcdDevice = cpu_to_le16(mod_data.release);
|
|
|
|
i = (transport_is_cbi() ? 3 : 2); // Number of endpoints
|
|
fsg_intf_desc.bNumEndpoints = i;
|
|
fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type;
|
|
fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type;
|
|
fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
|
|
|
|
if (gadget_is_dualspeed(gadget)) {
|
|
fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
|
|
|
|
/* Assume endpoint addresses are the same for both speeds */
|
|
fsg_hs_bulk_in_desc.bEndpointAddress =
|
|
fsg_fs_bulk_in_desc.bEndpointAddress;
|
|
fsg_hs_bulk_out_desc.bEndpointAddress =
|
|
fsg_fs_bulk_out_desc.bEndpointAddress;
|
|
fsg_hs_intr_in_desc.bEndpointAddress =
|
|
fsg_fs_intr_in_desc.bEndpointAddress;
|
|
}
|
|
|
|
if (gadget_is_superspeed(gadget)) {
|
|
unsigned max_burst;
|
|
|
|
fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
|
|
|
|
/* Calculate bMaxBurst, we know packet size is 1024 */
|
|
max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
|
|
|
|
/* Assume endpoint addresses are the same for both speeds */
|
|
fsg_ss_bulk_in_desc.bEndpointAddress =
|
|
fsg_fs_bulk_in_desc.bEndpointAddress;
|
|
fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
|
|
|
|
fsg_ss_bulk_out_desc.bEndpointAddress =
|
|
fsg_fs_bulk_out_desc.bEndpointAddress;
|
|
fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
|
|
}
|
|
|
|
if (gadget_is_otg(gadget))
|
|
fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
|
|
|
|
rc = -ENOMEM;
|
|
|
|
/* Allocate the request and buffer for endpoint 0 */
|
|
fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
|
|
if (!req)
|
|
goto out;
|
|
req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL);
|
|
if (!req->buf)
|
|
goto out;
|
|
req->complete = ep0_complete;
|
|
|
|
/* Allocate the data buffers */
|
|
for (i = 0; i < fsg_num_buffers; ++i) {
|
|
struct fsg_buffhd *bh = &fsg->buffhds[i];
|
|
|
|
/* Allocate for the bulk-in endpoint. We assume that
|
|
* the buffer will also work with the bulk-out (and
|
|
* interrupt-in) endpoint. */
|
|
bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL);
|
|
if (!bh->buf)
|
|
goto out;
|
|
bh->next = bh + 1;
|
|
}
|
|
fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
|
|
|
|
/* This should reflect the actual gadget power source */
|
|
usb_gadget_set_selfpowered(gadget);
|
|
|
|
snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer,
|
|
"%s %s with %s",
|
|
init_utsname()->sysname, init_utsname()->release,
|
|
gadget->name);
|
|
|
|
fsg->thread_task = kthread_create(fsg_main_thread, fsg,
|
|
"file-storage-gadget");
|
|
if (IS_ERR(fsg->thread_task)) {
|
|
rc = PTR_ERR(fsg->thread_task);
|
|
goto out;
|
|
}
|
|
|
|
INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
|
|
INFO(fsg, "NOTE: This driver is deprecated. "
|
|
"Consider using g_mass_storage instead.\n");
|
|
INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
|
|
|
|
pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
|
|
for (i = 0; i < fsg->nluns; ++i) {
|
|
curlun = &fsg->luns[i];
|
|
if (fsg_lun_is_open(curlun)) {
|
|
p = NULL;
|
|
if (pathbuf) {
|
|
p = d_path(&curlun->filp->f_path,
|
|
pathbuf, PATH_MAX);
|
|
if (IS_ERR(p))
|
|
p = NULL;
|
|
}
|
|
LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
|
|
curlun->ro, curlun->nofua, (p ? p : "(error)"));
|
|
}
|
|
}
|
|
kfree(pathbuf);
|
|
|
|
DBG(fsg, "transport=%s (x%02x)\n",
|
|
mod_data.transport_name, mod_data.transport_type);
|
|
DBG(fsg, "protocol=%s (x%02x)\n",
|
|
mod_data.protocol_name, mod_data.protocol_type);
|
|
DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n",
|
|
mod_data.vendor, mod_data.product, mod_data.release);
|
|
DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n",
|
|
mod_data.removable, mod_data.can_stall,
|
|
mod_data.cdrom, mod_data.buflen);
|
|
DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task));
|
|
|
|
set_bit(REGISTERED, &fsg->atomic_bitflags);
|
|
|
|
/* Tell the thread to start working */
|
|
wake_up_process(fsg->thread_task);
|
|
return 0;
|
|
|
|
autoconf_fail:
|
|
ERROR(fsg, "unable to autoconfigure all endpoints\n");
|
|
rc = -ENOTSUPP;
|
|
|
|
out:
|
|
fsg->state = FSG_STATE_TERMINATED; // The thread is dead
|
|
fsg_unbind(gadget);
|
|
complete(&fsg->thread_notifier);
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void fsg_suspend(struct usb_gadget *gadget)
|
|
{
|
|
struct fsg_dev *fsg = get_gadget_data(gadget);
|
|
|
|
DBG(fsg, "suspend\n");
|
|
set_bit(SUSPENDED, &fsg->atomic_bitflags);
|
|
}
|
|
|
|
static void fsg_resume(struct usb_gadget *gadget)
|
|
{
|
|
struct fsg_dev *fsg = get_gadget_data(gadget);
|
|
|
|
DBG(fsg, "resume\n");
|
|
clear_bit(SUSPENDED, &fsg->atomic_bitflags);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct usb_gadget_driver fsg_driver = {
|
|
.speed = USB_SPEED_SUPER,
|
|
.function = (char *) fsg_string_product,
|
|
.unbind = fsg_unbind,
|
|
.disconnect = fsg_disconnect,
|
|
.setup = fsg_setup,
|
|
.suspend = fsg_suspend,
|
|
.resume = fsg_resume,
|
|
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
// .release = ...
|
|
// .suspend = ...
|
|
// .resume = ...
|
|
},
|
|
};
|
|
|
|
|
|
static int __init fsg_alloc(void)
|
|
{
|
|
struct fsg_dev *fsg;
|
|
|
|
fsg = kzalloc(sizeof *fsg +
|
|
fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
|
|
|
|
if (!fsg)
|
|
return -ENOMEM;
|
|
spin_lock_init(&fsg->lock);
|
|
init_rwsem(&fsg->filesem);
|
|
kref_init(&fsg->ref);
|
|
init_completion(&fsg->thread_notifier);
|
|
|
|
the_fsg = fsg;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int __init fsg_init(void)
|
|
{
|
|
int rc;
|
|
struct fsg_dev *fsg;
|
|
|
|
rc = fsg_num_buffers_validate();
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
if ((rc = fsg_alloc()) != 0)
|
|
return rc;
|
|
fsg = the_fsg;
|
|
if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0)
|
|
kref_put(&fsg->ref, fsg_release);
|
|
return rc;
|
|
}
|
|
module_init(fsg_init);
|
|
|
|
|
|
static void __exit fsg_cleanup(void)
|
|
{
|
|
struct fsg_dev *fsg = the_fsg;
|
|
|
|
/* Unregister the driver iff the thread hasn't already done so */
|
|
if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
|
|
usb_gadget_unregister_driver(&fsg_driver);
|
|
|
|
/* Wait for the thread to finish up */
|
|
wait_for_completion(&fsg->thread_notifier);
|
|
|
|
kref_put(&fsg->ref, fsg_release);
|
|
}
|
|
module_exit(fsg_cleanup);
|