mirror of https://gitee.com/openkylin/linux.git
3553 lines
88 KiB
C
3553 lines
88 KiB
C
/*
|
|
* Intel Langwell USB Device Controller driver
|
|
* Copyright (C) 2008-2009, Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*/
|
|
|
|
|
|
/* #undef DEBUG */
|
|
/* #undef VERBOSE_DEBUG */
|
|
|
|
#if defined(CONFIG_USB_LANGWELL_OTG)
|
|
#define OTG_TRANSCEIVER
|
|
#endif
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/list.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/device.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "langwell_udc.h"
|
|
|
|
|
|
#define DRIVER_DESC "Intel Langwell USB Device Controller driver"
|
|
#define DRIVER_VERSION "16 May 2009"
|
|
|
|
static const char driver_name[] = "langwell_udc";
|
|
static const char driver_desc[] = DRIVER_DESC;
|
|
|
|
|
|
/* for endpoint 0 operations */
|
|
static const struct usb_endpoint_descriptor
|
|
langwell_ep0_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = 0,
|
|
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
|
|
.wMaxPacketSize = EP0_MAX_PKT_SIZE,
|
|
};
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
/* debugging */
|
|
|
|
#ifdef VERBOSE_DEBUG
|
|
static inline void print_all_registers(struct langwell_udc *dev)
|
|
{
|
|
int i;
|
|
|
|
/* Capability Registers */
|
|
dev_dbg(&dev->pdev->dev,
|
|
"Capability Registers (offset: 0x%04x, length: 0x%08x)\n",
|
|
CAP_REG_OFFSET, (u32)sizeof(struct langwell_cap_regs));
|
|
dev_dbg(&dev->pdev->dev, "caplength=0x%02x\n",
|
|
readb(&dev->cap_regs->caplength));
|
|
dev_dbg(&dev->pdev->dev, "hciversion=0x%04x\n",
|
|
readw(&dev->cap_regs->hciversion));
|
|
dev_dbg(&dev->pdev->dev, "hcsparams=0x%08x\n",
|
|
readl(&dev->cap_regs->hcsparams));
|
|
dev_dbg(&dev->pdev->dev, "hccparams=0x%08x\n",
|
|
readl(&dev->cap_regs->hccparams));
|
|
dev_dbg(&dev->pdev->dev, "dciversion=0x%04x\n",
|
|
readw(&dev->cap_regs->dciversion));
|
|
dev_dbg(&dev->pdev->dev, "dccparams=0x%08x\n",
|
|
readl(&dev->cap_regs->dccparams));
|
|
|
|
/* Operational Registers */
|
|
dev_dbg(&dev->pdev->dev,
|
|
"Operational Registers (offset: 0x%04x, length: 0x%08x)\n",
|
|
OP_REG_OFFSET, (u32)sizeof(struct langwell_op_regs));
|
|
dev_dbg(&dev->pdev->dev, "extsts=0x%08x\n",
|
|
readl(&dev->op_regs->extsts));
|
|
dev_dbg(&dev->pdev->dev, "extintr=0x%08x\n",
|
|
readl(&dev->op_regs->extintr));
|
|
dev_dbg(&dev->pdev->dev, "usbcmd=0x%08x\n",
|
|
readl(&dev->op_regs->usbcmd));
|
|
dev_dbg(&dev->pdev->dev, "usbsts=0x%08x\n",
|
|
readl(&dev->op_regs->usbsts));
|
|
dev_dbg(&dev->pdev->dev, "usbintr=0x%08x\n",
|
|
readl(&dev->op_regs->usbintr));
|
|
dev_dbg(&dev->pdev->dev, "frindex=0x%08x\n",
|
|
readl(&dev->op_regs->frindex));
|
|
dev_dbg(&dev->pdev->dev, "ctrldssegment=0x%08x\n",
|
|
readl(&dev->op_regs->ctrldssegment));
|
|
dev_dbg(&dev->pdev->dev, "deviceaddr=0x%08x\n",
|
|
readl(&dev->op_regs->deviceaddr));
|
|
dev_dbg(&dev->pdev->dev, "endpointlistaddr=0x%08x\n",
|
|
readl(&dev->op_regs->endpointlistaddr));
|
|
dev_dbg(&dev->pdev->dev, "ttctrl=0x%08x\n",
|
|
readl(&dev->op_regs->ttctrl));
|
|
dev_dbg(&dev->pdev->dev, "burstsize=0x%08x\n",
|
|
readl(&dev->op_regs->burstsize));
|
|
dev_dbg(&dev->pdev->dev, "txfilltuning=0x%08x\n",
|
|
readl(&dev->op_regs->txfilltuning));
|
|
dev_dbg(&dev->pdev->dev, "txttfilltuning=0x%08x\n",
|
|
readl(&dev->op_regs->txttfilltuning));
|
|
dev_dbg(&dev->pdev->dev, "ic_usb=0x%08x\n",
|
|
readl(&dev->op_regs->ic_usb));
|
|
dev_dbg(&dev->pdev->dev, "ulpi_viewport=0x%08x\n",
|
|
readl(&dev->op_regs->ulpi_viewport));
|
|
dev_dbg(&dev->pdev->dev, "configflag=0x%08x\n",
|
|
readl(&dev->op_regs->configflag));
|
|
dev_dbg(&dev->pdev->dev, "portsc1=0x%08x\n",
|
|
readl(&dev->op_regs->portsc1));
|
|
dev_dbg(&dev->pdev->dev, "devlc=0x%08x\n",
|
|
readl(&dev->op_regs->devlc));
|
|
dev_dbg(&dev->pdev->dev, "otgsc=0x%08x\n",
|
|
readl(&dev->op_regs->otgsc));
|
|
dev_dbg(&dev->pdev->dev, "usbmode=0x%08x\n",
|
|
readl(&dev->op_regs->usbmode));
|
|
dev_dbg(&dev->pdev->dev, "endptnak=0x%08x\n",
|
|
readl(&dev->op_regs->endptnak));
|
|
dev_dbg(&dev->pdev->dev, "endptnaken=0x%08x\n",
|
|
readl(&dev->op_regs->endptnaken));
|
|
dev_dbg(&dev->pdev->dev, "endptsetupstat=0x%08x\n",
|
|
readl(&dev->op_regs->endptsetupstat));
|
|
dev_dbg(&dev->pdev->dev, "endptprime=0x%08x\n",
|
|
readl(&dev->op_regs->endptprime));
|
|
dev_dbg(&dev->pdev->dev, "endptflush=0x%08x\n",
|
|
readl(&dev->op_regs->endptflush));
|
|
dev_dbg(&dev->pdev->dev, "endptstat=0x%08x\n",
|
|
readl(&dev->op_regs->endptstat));
|
|
dev_dbg(&dev->pdev->dev, "endptcomplete=0x%08x\n",
|
|
readl(&dev->op_regs->endptcomplete));
|
|
|
|
for (i = 0; i < dev->ep_max / 2; i++) {
|
|
dev_dbg(&dev->pdev->dev, "endptctrl[%d]=0x%08x\n",
|
|
i, readl(&dev->op_regs->endptctrl[i]));
|
|
}
|
|
}
|
|
#else
|
|
|
|
#define print_all_registers(dev) do { } while (0)
|
|
|
|
#endif /* VERBOSE_DEBUG */
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \
|
|
USB_DIR_IN) : (usb_endpoint_dir_in((ep)->desc)))
|
|
|
|
#define DIR_STRING(ep) (is_in(ep) ? "in" : "out")
|
|
|
|
|
|
static char *type_string(const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
switch (usb_endpoint_type(desc)) {
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
return "bulk";
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
return "iso";
|
|
case USB_ENDPOINT_XFER_INT:
|
|
return "int";
|
|
};
|
|
|
|
return "control";
|
|
}
|
|
|
|
|
|
/* configure endpoint control registers */
|
|
static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
|
|
unsigned char is_in, unsigned char ep_type)
|
|
{
|
|
struct langwell_udc *dev;
|
|
u32 endptctrl;
|
|
|
|
dev = ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
|
|
if (is_in) { /* TX */
|
|
if (ep_num)
|
|
endptctrl |= EPCTRL_TXR;
|
|
endptctrl |= EPCTRL_TXE;
|
|
endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
|
|
} else { /* RX */
|
|
if (ep_num)
|
|
endptctrl |= EPCTRL_RXR;
|
|
endptctrl |= EPCTRL_RXE;
|
|
endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
|
|
}
|
|
|
|
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* reset ep0 dQH and endptctrl */
|
|
static void ep0_reset(struct langwell_udc *dev)
|
|
{
|
|
struct langwell_ep *ep;
|
|
int i;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* ep0 in and out */
|
|
for (i = 0; i < 2; i++) {
|
|
ep = &dev->ep[i];
|
|
ep->dev = dev;
|
|
|
|
/* ep0 dQH */
|
|
ep->dqh = &dev->ep_dqh[i];
|
|
|
|
/* configure ep0 endpoint capabilities in dQH */
|
|
ep->dqh->dqh_ios = 1;
|
|
ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
|
|
|
|
/* enable ep0-in HW zero length termination select */
|
|
if (is_in(ep))
|
|
ep->dqh->dqh_zlt = 0;
|
|
ep->dqh->dqh_mult = 0;
|
|
|
|
ep->dqh->dtd_next = DTD_TERM;
|
|
|
|
/* configure ep0 control registers */
|
|
ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
|
|
}
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* endpoints operations */
|
|
|
|
/* configure endpoint, making it usable */
|
|
static int langwell_ep_enable(struct usb_ep *_ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct langwell_udc *dev;
|
|
struct langwell_ep *ep;
|
|
u16 max = 0;
|
|
unsigned long flags;
|
|
int i, retval = 0;
|
|
unsigned char zlt, ios = 0, mult = 0;
|
|
|
|
ep = container_of(_ep, struct langwell_ep, ep);
|
|
dev = ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (!_ep || !desc || ep->desc
|
|
|| desc->bDescriptorType != USB_DT_ENDPOINT)
|
|
return -EINVAL;
|
|
|
|
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
|
|
return -ESHUTDOWN;
|
|
|
|
max = usb_endpoint_maxp(desc);
|
|
|
|
/*
|
|
* disable HW zero length termination select
|
|
* driver handles zero length packet through req->req.zero
|
|
*/
|
|
zlt = 1;
|
|
|
|
/*
|
|
* sanity check type, direction, address, and then
|
|
* initialize the endpoint capabilities fields in dQH
|
|
*/
|
|
switch (usb_endpoint_type(desc)) {
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
ios = 1;
|
|
break;
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
if ((dev->gadget.speed == USB_SPEED_HIGH
|
|
&& max != 512)
|
|
|| (dev->gadget.speed == USB_SPEED_FULL
|
|
&& max > 64)) {
|
|
goto done;
|
|
}
|
|
break;
|
|
case USB_ENDPOINT_XFER_INT:
|
|
if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
|
|
goto done;
|
|
|
|
switch (dev->gadget.speed) {
|
|
case USB_SPEED_HIGH:
|
|
if (max <= 1024)
|
|
break;
|
|
case USB_SPEED_FULL:
|
|
if (max <= 64)
|
|
break;
|
|
default:
|
|
if (max <= 8)
|
|
break;
|
|
goto done;
|
|
}
|
|
break;
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
if (strstr(ep->ep.name, "-bulk")
|
|
|| strstr(ep->ep.name, "-int"))
|
|
goto done;
|
|
|
|
switch (dev->gadget.speed) {
|
|
case USB_SPEED_HIGH:
|
|
if (max <= 1024)
|
|
break;
|
|
case USB_SPEED_FULL:
|
|
if (max <= 1023)
|
|
break;
|
|
default:
|
|
goto done;
|
|
}
|
|
/*
|
|
* FIXME:
|
|
* calculate transactions needed for high bandwidth iso
|
|
*/
|
|
mult = (unsigned char)(1 + ((max >> 11) & 0x03));
|
|
max = max & 0x8ff; /* bit 0~10 */
|
|
/* 3 transactions at most */
|
|
if (mult > 3)
|
|
goto done;
|
|
break;
|
|
default:
|
|
goto done;
|
|
}
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
ep->ep.maxpacket = max;
|
|
ep->desc = desc;
|
|
ep->stopped = 0;
|
|
ep->ep_num = usb_endpoint_num(desc);
|
|
|
|
/* ep_type */
|
|
ep->ep_type = usb_endpoint_type(desc);
|
|
|
|
/* configure endpoint control registers */
|
|
ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
|
|
|
|
/* configure endpoint capabilities in dQH */
|
|
i = ep->ep_num * 2 + is_in(ep);
|
|
ep->dqh = &dev->ep_dqh[i];
|
|
ep->dqh->dqh_ios = ios;
|
|
ep->dqh->dqh_mpl = cpu_to_le16(max);
|
|
ep->dqh->dqh_zlt = zlt;
|
|
ep->dqh->dqh_mult = mult;
|
|
ep->dqh->dtd_next = DTD_TERM;
|
|
|
|
dev_dbg(&dev->pdev->dev, "enabled %s (ep%d%s-%s), max %04x\n",
|
|
_ep->name,
|
|
ep->ep_num,
|
|
DIR_STRING(ep),
|
|
type_string(desc),
|
|
max);
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
done:
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* retire a request */
|
|
static void done(struct langwell_ep *ep, struct langwell_request *req,
|
|
int status)
|
|
{
|
|
struct langwell_udc *dev = ep->dev;
|
|
unsigned stopped = ep->stopped;
|
|
struct langwell_dtd *curr_dtd, *next_dtd;
|
|
int i;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* remove the req from ep->queue */
|
|
list_del_init(&req->queue);
|
|
|
|
if (req->req.status == -EINPROGRESS)
|
|
req->req.status = status;
|
|
else
|
|
status = req->req.status;
|
|
|
|
/* free dTD for the request */
|
|
next_dtd = req->head;
|
|
for (i = 0; i < req->dtd_count; i++) {
|
|
curr_dtd = next_dtd;
|
|
if (i != req->dtd_count - 1)
|
|
next_dtd = curr_dtd->next_dtd_virt;
|
|
dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
|
|
}
|
|
|
|
if (req->mapped) {
|
|
dma_unmap_single(&dev->pdev->dev,
|
|
req->req.dma, req->req.length,
|
|
is_in(ep) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
|
|
req->req.dma = DMA_ADDR_INVALID;
|
|
req->mapped = 0;
|
|
} else
|
|
dma_sync_single_for_cpu(&dev->pdev->dev, req->req.dma,
|
|
req->req.length,
|
|
is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
|
|
|
|
if (status != -ESHUTDOWN)
|
|
dev_dbg(&dev->pdev->dev,
|
|
"complete %s, req %p, stat %d, len %u/%u\n",
|
|
ep->ep.name, &req->req, status,
|
|
req->req.actual, req->req.length);
|
|
|
|
/* don't modify queue heads during completion callback */
|
|
ep->stopped = 1;
|
|
|
|
spin_unlock(&dev->lock);
|
|
/* complete routine from gadget driver */
|
|
if (req->req.complete)
|
|
req->req.complete(&ep->ep, &req->req);
|
|
|
|
spin_lock(&dev->lock);
|
|
ep->stopped = stopped;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
static void langwell_ep_fifo_flush(struct usb_ep *_ep);
|
|
|
|
/* delete all endpoint requests, called with spinlock held */
|
|
static void nuke(struct langwell_ep *ep, int status)
|
|
{
|
|
/* called with spinlock held */
|
|
ep->stopped = 1;
|
|
|
|
/* endpoint fifo flush */
|
|
if (&ep->ep && ep->desc)
|
|
langwell_ep_fifo_flush(&ep->ep);
|
|
|
|
while (!list_empty(&ep->queue)) {
|
|
struct langwell_request *req = NULL;
|
|
req = list_entry(ep->queue.next, struct langwell_request,
|
|
queue);
|
|
done(ep, req, status);
|
|
}
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* endpoint is no longer usable */
|
|
static int langwell_ep_disable(struct usb_ep *_ep)
|
|
{
|
|
struct langwell_ep *ep;
|
|
unsigned long flags;
|
|
struct langwell_udc *dev;
|
|
int ep_num;
|
|
u32 endptctrl;
|
|
|
|
ep = container_of(_ep, struct langwell_ep, ep);
|
|
dev = ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (!_ep || !ep->desc)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/* disable endpoint control register */
|
|
ep_num = ep->ep_num;
|
|
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
|
|
if (is_in(ep))
|
|
endptctrl &= ~EPCTRL_TXE;
|
|
else
|
|
endptctrl &= ~EPCTRL_RXE;
|
|
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
|
|
|
|
/* nuke all pending requests (does flush) */
|
|
nuke(ep, -ESHUTDOWN);
|
|
|
|
ep->desc = NULL;
|
|
ep->stopped = 1;
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
dev_dbg(&dev->pdev->dev, "disabled %s\n", _ep->name);
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* allocate a request object to use with this endpoint */
|
|
static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct langwell_ep *ep;
|
|
struct langwell_udc *dev;
|
|
struct langwell_request *req = NULL;
|
|
|
|
if (!_ep)
|
|
return NULL;
|
|
|
|
ep = container_of(_ep, struct langwell_ep, ep);
|
|
dev = ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
req = kzalloc(sizeof(*req), gfp_flags);
|
|
if (!req)
|
|
return NULL;
|
|
|
|
req->req.dma = DMA_ADDR_INVALID;
|
|
INIT_LIST_HEAD(&req->queue);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "alloc request for %s\n", _ep->name);
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return &req->req;
|
|
}
|
|
|
|
|
|
/* free a request object */
|
|
static void langwell_free_request(struct usb_ep *_ep,
|
|
struct usb_request *_req)
|
|
{
|
|
struct langwell_ep *ep;
|
|
struct langwell_udc *dev;
|
|
struct langwell_request *req = NULL;
|
|
|
|
ep = container_of(_ep, struct langwell_ep, ep);
|
|
dev = ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (!_ep || !_req)
|
|
return;
|
|
|
|
req = container_of(_req, struct langwell_request, req);
|
|
WARN_ON(!list_empty(&req->queue));
|
|
|
|
if (_req)
|
|
kfree(req);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "free request for %s\n", _ep->name);
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* queue dTD and PRIME endpoint */
|
|
static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
|
|
{
|
|
u32 bit_mask, usbcmd, endptstat, dtd_dma;
|
|
u8 dtd_status;
|
|
int i;
|
|
struct langwell_dqh *dqh;
|
|
struct langwell_udc *dev;
|
|
|
|
dev = ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
i = ep->ep_num * 2 + is_in(ep);
|
|
dqh = &dev->ep_dqh[i];
|
|
|
|
if (ep->ep_num)
|
|
dev_vdbg(&dev->pdev->dev, "%s\n", ep->name);
|
|
else
|
|
/* ep0 */
|
|
dev_vdbg(&dev->pdev->dev, "%s-%s\n", ep->name, DIR_STRING(ep));
|
|
|
|
dev_vdbg(&dev->pdev->dev, "ep_dqh[%d] addr: 0x%p\n",
|
|
i, &(dev->ep_dqh[i]));
|
|
|
|
bit_mask = is_in(ep) ?
|
|
(1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
|
|
|
|
dev_vdbg(&dev->pdev->dev, "bit_mask = 0x%08x\n", bit_mask);
|
|
|
|
/* check if the pipe is empty */
|
|
if (!(list_empty(&ep->queue))) {
|
|
/* add dTD to the end of linked list */
|
|
struct langwell_request *lastreq;
|
|
lastreq = list_entry(ep->queue.prev,
|
|
struct langwell_request, queue);
|
|
|
|
lastreq->tail->dtd_next =
|
|
cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
|
|
|
|
/* read prime bit, if 1 goto out */
|
|
if (readl(&dev->op_regs->endptprime) & bit_mask)
|
|
goto out;
|
|
|
|
do {
|
|
/* set ATDTW bit in USBCMD */
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
|
|
|
|
/* read correct status bit */
|
|
endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
|
|
|
|
} while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
|
|
|
|
/* write ATDTW bit to 0 */
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
|
|
|
|
if (endptstat)
|
|
goto out;
|
|
}
|
|
|
|
/* write dQH next pointer and terminate bit to 0 */
|
|
dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
|
|
dqh->dtd_next = cpu_to_le32(dtd_dma);
|
|
|
|
/* clear active and halt bit */
|
|
dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
|
|
dqh->dtd_status &= dtd_status;
|
|
dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
|
|
|
|
/* ensure that updates to the dQH will occur before priming */
|
|
wmb();
|
|
|
|
/* write 1 to endptprime register to PRIME endpoint */
|
|
bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
|
|
dev_vdbg(&dev->pdev->dev, "endprime bit_mask = 0x%08x\n", bit_mask);
|
|
writel(bit_mask, &dev->op_regs->endptprime);
|
|
out:
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* fill in the dTD structure to build a transfer descriptor */
|
|
static struct langwell_dtd *build_dtd(struct langwell_request *req,
|
|
unsigned *length, dma_addr_t *dma, int *is_last)
|
|
{
|
|
u32 buf_ptr;
|
|
struct langwell_dtd *dtd;
|
|
struct langwell_udc *dev;
|
|
int i;
|
|
|
|
dev = req->ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* the maximum transfer length, up to 16k bytes */
|
|
*length = min(req->req.length - req->req.actual,
|
|
(unsigned)DTD_MAX_TRANSFER_LENGTH);
|
|
|
|
/* create dTD dma_pool resource */
|
|
dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
|
|
if (dtd == NULL)
|
|
return dtd;
|
|
dtd->dtd_dma = *dma;
|
|
|
|
/* initialize buffer page pointers */
|
|
buf_ptr = (u32)(req->req.dma + req->req.actual);
|
|
for (i = 0; i < 5; i++)
|
|
dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
|
|
|
|
req->req.actual += *length;
|
|
|
|
/* fill in total bytes with transfer size */
|
|
dtd->dtd_total = cpu_to_le16(*length);
|
|
dev_vdbg(&dev->pdev->dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
|
|
|
|
/* set is_last flag if req->req.zero is set or not */
|
|
if (req->req.zero) {
|
|
if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
|
|
*is_last = 1;
|
|
else
|
|
*is_last = 0;
|
|
} else if (req->req.length == req->req.actual) {
|
|
*is_last = 1;
|
|
} else
|
|
*is_last = 0;
|
|
|
|
if (*is_last == 0)
|
|
dev_vdbg(&dev->pdev->dev, "multi-dtd request!\n");
|
|
|
|
/* set interrupt on complete bit for the last dTD */
|
|
if (*is_last && !req->req.no_interrupt)
|
|
dtd->dtd_ioc = 1;
|
|
|
|
/* set multiplier override 0 for non-ISO and non-TX endpoint */
|
|
dtd->dtd_multo = 0;
|
|
|
|
/* set the active bit of status field to 1 */
|
|
dtd->dtd_status = DTD_STS_ACTIVE;
|
|
dev_vdbg(&dev->pdev->dev, "dtd->dtd_status = 0x%02x\n",
|
|
dtd->dtd_status);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "length = %d, dma addr= 0x%08x\n",
|
|
*length, (int)*dma);
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return dtd;
|
|
}
|
|
|
|
|
|
/* generate dTD linked list for a request */
|
|
static int req_to_dtd(struct langwell_request *req)
|
|
{
|
|
unsigned count;
|
|
int is_last, is_first = 1;
|
|
struct langwell_dtd *dtd, *last_dtd = NULL;
|
|
struct langwell_udc *dev;
|
|
dma_addr_t dma;
|
|
|
|
dev = req->ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
do {
|
|
dtd = build_dtd(req, &count, &dma, &is_last);
|
|
if (dtd == NULL)
|
|
return -ENOMEM;
|
|
|
|
if (is_first) {
|
|
is_first = 0;
|
|
req->head = dtd;
|
|
} else {
|
|
last_dtd->dtd_next = cpu_to_le32(dma);
|
|
last_dtd->next_dtd_virt = dtd;
|
|
}
|
|
last_dtd = dtd;
|
|
req->dtd_count++;
|
|
} while (!is_last);
|
|
|
|
/* set terminate bit to 1 for the last dTD */
|
|
dtd->dtd_next = DTD_TERM;
|
|
|
|
req->tail = dtd;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* queue (submits) an I/O requests to an endpoint */
|
|
static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct langwell_request *req;
|
|
struct langwell_ep *ep;
|
|
struct langwell_udc *dev;
|
|
unsigned long flags;
|
|
int is_iso = 0, zlflag = 0;
|
|
|
|
/* always require a cpu-view buffer */
|
|
req = container_of(_req, struct langwell_request, req);
|
|
ep = container_of(_ep, struct langwell_ep, ep);
|
|
|
|
if (!_req || !_req->complete || !_req->buf
|
|
|| !list_empty(&req->queue)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (unlikely(!_ep || !ep->desc))
|
|
return -EINVAL;
|
|
|
|
dev = ep->dev;
|
|
req->ep = ep;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (usb_endpoint_xfer_isoc(ep->desc)) {
|
|
if (req->req.length > ep->ep.maxpacket)
|
|
return -EMSGSIZE;
|
|
is_iso = 1;
|
|
}
|
|
|
|
if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
|
|
return -ESHUTDOWN;
|
|
|
|
/* set up dma mapping in case the caller didn't */
|
|
if (_req->dma == DMA_ADDR_INVALID) {
|
|
/* WORKAROUND: WARN_ON(size == 0) */
|
|
if (_req->length == 0) {
|
|
dev_vdbg(&dev->pdev->dev, "req->length: 0->1\n");
|
|
zlflag = 1;
|
|
_req->length++;
|
|
}
|
|
|
|
_req->dma = dma_map_single(&dev->pdev->dev,
|
|
_req->buf, _req->length,
|
|
is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
|
|
if (zlflag && (_req->length == 1)) {
|
|
dev_vdbg(&dev->pdev->dev, "req->length: 1->0\n");
|
|
zlflag = 0;
|
|
_req->length = 0;
|
|
}
|
|
|
|
req->mapped = 1;
|
|
dev_vdbg(&dev->pdev->dev, "req->mapped = 1\n");
|
|
} else {
|
|
dma_sync_single_for_device(&dev->pdev->dev,
|
|
_req->dma, _req->length,
|
|
is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
|
|
req->mapped = 0;
|
|
dev_vdbg(&dev->pdev->dev, "req->mapped = 0\n");
|
|
}
|
|
|
|
dev_dbg(&dev->pdev->dev,
|
|
"%s queue req %p, len %u, buf %p, dma 0x%08x\n",
|
|
_ep->name,
|
|
_req, _req->length, _req->buf, (int)_req->dma);
|
|
|
|
_req->status = -EINPROGRESS;
|
|
_req->actual = 0;
|
|
req->dtd_count = 0;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/* build and put dTDs to endpoint queue */
|
|
if (!req_to_dtd(req)) {
|
|
queue_dtd(ep, req);
|
|
} else {
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* update ep0 state */
|
|
if (ep->ep_num == 0)
|
|
dev->ep0_state = DATA_STATE_XMIT;
|
|
|
|
if (likely(req != NULL)) {
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
dev_vdbg(&dev->pdev->dev, "list_add_tail()\n");
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* dequeue (cancels, unlinks) an I/O request from an endpoint */
|
|
static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct langwell_ep *ep;
|
|
struct langwell_udc *dev;
|
|
struct langwell_request *req;
|
|
unsigned long flags;
|
|
int stopped, ep_num, retval = 0;
|
|
u32 endptctrl;
|
|
|
|
ep = container_of(_ep, struct langwell_ep, ep);
|
|
dev = ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (!_ep || !ep->desc || !_req)
|
|
return -EINVAL;
|
|
|
|
if (!dev->driver)
|
|
return -ESHUTDOWN;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
stopped = ep->stopped;
|
|
|
|
/* quiesce dma while we patch the queue */
|
|
ep->stopped = 1;
|
|
ep_num = ep->ep_num;
|
|
|
|
/* disable endpoint control register */
|
|
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
|
|
if (is_in(ep))
|
|
endptctrl &= ~EPCTRL_TXE;
|
|
else
|
|
endptctrl &= ~EPCTRL_RXE;
|
|
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
|
|
|
|
/* make sure it's still queued on this endpoint */
|
|
list_for_each_entry(req, &ep->queue, queue) {
|
|
if (&req->req == _req)
|
|
break;
|
|
}
|
|
|
|
if (&req->req != _req) {
|
|
retval = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
/* queue head may be partially complete. */
|
|
if (ep->queue.next == &req->queue) {
|
|
dev_dbg(&dev->pdev->dev, "unlink (%s) dma\n", _ep->name);
|
|
_req->status = -ECONNRESET;
|
|
langwell_ep_fifo_flush(&ep->ep);
|
|
|
|
/* not the last request in endpoint queue */
|
|
if (likely(ep->queue.next == &req->queue)) {
|
|
struct langwell_dqh *dqh;
|
|
struct langwell_request *next_req;
|
|
|
|
dqh = ep->dqh;
|
|
next_req = list_entry(req->queue.next,
|
|
struct langwell_request, queue);
|
|
|
|
/* point the dQH to the first dTD of next request */
|
|
writel((u32) next_req->head, &dqh->dqh_current);
|
|
}
|
|
} else {
|
|
struct langwell_request *prev_req;
|
|
|
|
prev_req = list_entry(req->queue.prev,
|
|
struct langwell_request, queue);
|
|
writel(readl(&req->tail->dtd_next),
|
|
&prev_req->tail->dtd_next);
|
|
}
|
|
|
|
done(ep, req, -ECONNRESET);
|
|
|
|
done:
|
|
/* enable endpoint again */
|
|
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
|
|
if (is_in(ep))
|
|
endptctrl |= EPCTRL_TXE;
|
|
else
|
|
endptctrl |= EPCTRL_RXE;
|
|
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
|
|
|
|
ep->stopped = stopped;
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* endpoint set/clear halt */
|
|
static void ep_set_halt(struct langwell_ep *ep, int value)
|
|
{
|
|
u32 endptctrl = 0;
|
|
int ep_num;
|
|
struct langwell_udc *dev = ep->dev;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
ep_num = ep->ep_num;
|
|
endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
|
|
|
|
/* value: 1 - set halt, 0 - clear halt */
|
|
if (value) {
|
|
/* set the stall bit */
|
|
if (is_in(ep))
|
|
endptctrl |= EPCTRL_TXS;
|
|
else
|
|
endptctrl |= EPCTRL_RXS;
|
|
} else {
|
|
/* clear the stall bit and reset data toggle */
|
|
if (is_in(ep)) {
|
|
endptctrl &= ~EPCTRL_TXS;
|
|
endptctrl |= EPCTRL_TXR;
|
|
} else {
|
|
endptctrl &= ~EPCTRL_RXS;
|
|
endptctrl |= EPCTRL_RXR;
|
|
}
|
|
}
|
|
|
|
writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* set the endpoint halt feature */
|
|
static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
|
|
{
|
|
struct langwell_ep *ep;
|
|
struct langwell_udc *dev;
|
|
unsigned long flags;
|
|
int retval = 0;
|
|
|
|
ep = container_of(_ep, struct langwell_ep, ep);
|
|
dev = ep->dev;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (!_ep || !ep->desc)
|
|
return -EINVAL;
|
|
|
|
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
|
|
return -ESHUTDOWN;
|
|
|
|
if (usb_endpoint_xfer_isoc(ep->desc))
|
|
return -EOPNOTSUPP;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/*
|
|
* attempt to halt IN ep will fail if any transfer requests
|
|
* are still queue
|
|
*/
|
|
if (!list_empty(&ep->queue) && is_in(ep) && value) {
|
|
/* IN endpoint FIFO holds bytes */
|
|
dev_dbg(&dev->pdev->dev, "%s FIFO holds bytes\n", _ep->name);
|
|
retval = -EAGAIN;
|
|
goto done;
|
|
}
|
|
|
|
/* endpoint set/clear halt */
|
|
if (ep->ep_num) {
|
|
ep_set_halt(ep, value);
|
|
} else { /* endpoint 0 */
|
|
dev->ep0_state = WAIT_FOR_SETUP;
|
|
dev->ep0_dir = USB_DIR_OUT;
|
|
}
|
|
done:
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
dev_dbg(&dev->pdev->dev, "%s %s halt\n",
|
|
_ep->name, value ? "set" : "clear");
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* set the halt feature and ignores clear requests */
|
|
static int langwell_ep_set_wedge(struct usb_ep *_ep)
|
|
{
|
|
struct langwell_ep *ep;
|
|
struct langwell_udc *dev;
|
|
|
|
ep = container_of(_ep, struct langwell_ep, ep);
|
|
dev = ep->dev;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (!_ep || !ep->desc)
|
|
return -EINVAL;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return usb_ep_set_halt(_ep);
|
|
}
|
|
|
|
|
|
/* flush contents of a fifo */
|
|
static void langwell_ep_fifo_flush(struct usb_ep *_ep)
|
|
{
|
|
struct langwell_ep *ep;
|
|
struct langwell_udc *dev;
|
|
u32 flush_bit;
|
|
unsigned long timeout;
|
|
|
|
ep = container_of(_ep, struct langwell_ep, ep);
|
|
dev = ep->dev;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (!_ep || !ep->desc) {
|
|
dev_vdbg(&dev->pdev->dev, "ep or ep->desc is NULL\n");
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return;
|
|
}
|
|
|
|
dev_vdbg(&dev->pdev->dev, "%s-%s fifo flush\n",
|
|
_ep->name, DIR_STRING(ep));
|
|
|
|
/* flush endpoint buffer */
|
|
if (ep->ep_num == 0)
|
|
flush_bit = (1 << 16) | 1;
|
|
else if (is_in(ep))
|
|
flush_bit = 1 << (ep->ep_num + 16); /* TX */
|
|
else
|
|
flush_bit = 1 << ep->ep_num; /* RX */
|
|
|
|
/* wait until flush complete */
|
|
timeout = jiffies + FLUSH_TIMEOUT;
|
|
do {
|
|
writel(flush_bit, &dev->op_regs->endptflush);
|
|
while (readl(&dev->op_regs->endptflush)) {
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_err(&dev->pdev->dev, "ep flush timeout\n");
|
|
goto done;
|
|
}
|
|
cpu_relax();
|
|
}
|
|
} while (readl(&dev->op_regs->endptstat) & flush_bit);
|
|
done:
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* endpoints operations structure */
|
|
static const struct usb_ep_ops langwell_ep_ops = {
|
|
|
|
/* configure endpoint, making it usable */
|
|
.enable = langwell_ep_enable,
|
|
|
|
/* endpoint is no longer usable */
|
|
.disable = langwell_ep_disable,
|
|
|
|
/* allocate a request object to use with this endpoint */
|
|
.alloc_request = langwell_alloc_request,
|
|
|
|
/* free a request object */
|
|
.free_request = langwell_free_request,
|
|
|
|
/* queue (submits) an I/O requests to an endpoint */
|
|
.queue = langwell_ep_queue,
|
|
|
|
/* dequeue (cancels, unlinks) an I/O request from an endpoint */
|
|
.dequeue = langwell_ep_dequeue,
|
|
|
|
/* set the endpoint halt feature */
|
|
.set_halt = langwell_ep_set_halt,
|
|
|
|
/* set the halt feature and ignores clear requests */
|
|
.set_wedge = langwell_ep_set_wedge,
|
|
|
|
/* flush contents of a fifo */
|
|
.fifo_flush = langwell_ep_fifo_flush,
|
|
};
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* device controller usb_gadget_ops structure */
|
|
|
|
/* returns the current frame number */
|
|
static int langwell_get_frame(struct usb_gadget *_gadget)
|
|
{
|
|
struct langwell_udc *dev;
|
|
u16 retval;
|
|
|
|
if (!_gadget)
|
|
return -ENODEV;
|
|
|
|
dev = container_of(_gadget, struct langwell_udc, gadget);
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* enter or exit PHY low power state */
|
|
static void langwell_phy_low_power(struct langwell_udc *dev, bool flag)
|
|
{
|
|
u32 devlc;
|
|
u8 devlc_byte2;
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
devlc = readl(&dev->op_regs->devlc);
|
|
dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
|
|
|
|
if (flag)
|
|
devlc |= LPM_PHCD;
|
|
else
|
|
devlc &= ~LPM_PHCD;
|
|
|
|
/* FIXME: workaround for Langwell A1/A2/A3 sighting */
|
|
devlc_byte2 = (devlc >> 16) & 0xff;
|
|
writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
|
|
|
|
devlc = readl(&dev->op_regs->devlc);
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"%s PHY low power suspend, devlc = 0x%08x\n",
|
|
flag ? "enter" : "exit", devlc);
|
|
}
|
|
|
|
|
|
/* tries to wake up the host connected to this gadget */
|
|
static int langwell_wakeup(struct usb_gadget *_gadget)
|
|
{
|
|
struct langwell_udc *dev;
|
|
u32 portsc1;
|
|
unsigned long flags;
|
|
|
|
if (!_gadget)
|
|
return 0;
|
|
|
|
dev = container_of(_gadget, struct langwell_udc, gadget);
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* remote wakeup feature not enabled by host */
|
|
if (!dev->remote_wakeup) {
|
|
dev_info(&dev->pdev->dev, "remote wakeup is disabled\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
portsc1 = readl(&dev->op_regs->portsc1);
|
|
if (!(portsc1 & PORTS_SUSP)) {
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/* LPM L1 to L0 or legacy remote wakeup */
|
|
if (dev->lpm && dev->lpm_state == LPM_L1)
|
|
dev_info(&dev->pdev->dev, "LPM L1 to L0 remote wakeup\n");
|
|
else
|
|
dev_info(&dev->pdev->dev, "device remote wakeup\n");
|
|
|
|
/* exit PHY low power suspend */
|
|
if (dev->pdev->device != 0x0829)
|
|
langwell_phy_low_power(dev, 0);
|
|
|
|
/* force port resume */
|
|
portsc1 |= PORTS_FPR;
|
|
writel(portsc1, &dev->op_regs->portsc1);
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* notify controller that VBUS is powered or not */
|
|
static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
|
|
{
|
|
struct langwell_udc *dev;
|
|
unsigned long flags;
|
|
u32 usbcmd;
|
|
|
|
if (!_gadget)
|
|
return -ENODEV;
|
|
|
|
dev = container_of(_gadget, struct langwell_udc, gadget);
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
dev_vdbg(&dev->pdev->dev, "VBUS status: %s\n",
|
|
is_active ? "on" : "off");
|
|
|
|
dev->vbus_active = (is_active != 0);
|
|
if (dev->driver && dev->softconnected && dev->vbus_active) {
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
usbcmd |= CMD_RUNSTOP;
|
|
writel(usbcmd, &dev->op_regs->usbcmd);
|
|
} else {
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
usbcmd &= ~CMD_RUNSTOP;
|
|
writel(usbcmd, &dev->op_regs->usbcmd);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* constrain controller's VBUS power usage */
|
|
static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
|
|
{
|
|
struct langwell_udc *dev;
|
|
|
|
if (!_gadget)
|
|
return -ENODEV;
|
|
|
|
dev = container_of(_gadget, struct langwell_udc, gadget);
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (dev->transceiver) {
|
|
dev_vdbg(&dev->pdev->dev, "otg_set_power\n");
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return otg_set_power(dev->transceiver, mA);
|
|
}
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
|
|
/* D+ pullup, software-controlled connect/disconnect to USB host */
|
|
static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
|
|
{
|
|
struct langwell_udc *dev;
|
|
u32 usbcmd;
|
|
unsigned long flags;
|
|
|
|
if (!_gadget)
|
|
return -ENODEV;
|
|
|
|
dev = container_of(_gadget, struct langwell_udc, gadget);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
dev->softconnected = (is_on != 0);
|
|
|
|
if (dev->driver && dev->softconnected && dev->vbus_active) {
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
usbcmd |= CMD_RUNSTOP;
|
|
writel(usbcmd, &dev->op_regs->usbcmd);
|
|
} else {
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
usbcmd &= ~CMD_RUNSTOP;
|
|
writel(usbcmd, &dev->op_regs->usbcmd);
|
|
}
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static int langwell_start(struct usb_gadget *g,
|
|
struct usb_gadget_driver *driver);
|
|
|
|
static int langwell_stop(struct usb_gadget *g,
|
|
struct usb_gadget_driver *driver);
|
|
|
|
/* device controller usb_gadget_ops structure */
|
|
static const struct usb_gadget_ops langwell_ops = {
|
|
|
|
/* returns the current frame number */
|
|
.get_frame = langwell_get_frame,
|
|
|
|
/* tries to wake up the host connected to this gadget */
|
|
.wakeup = langwell_wakeup,
|
|
|
|
/* set the device selfpowered feature, always selfpowered */
|
|
/* .set_selfpowered = langwell_set_selfpowered, */
|
|
|
|
/* notify controller that VBUS is powered or not */
|
|
.vbus_session = langwell_vbus_session,
|
|
|
|
/* constrain controller's VBUS power usage */
|
|
.vbus_draw = langwell_vbus_draw,
|
|
|
|
/* D+ pullup, software-controlled connect/disconnect to USB host */
|
|
.pullup = langwell_pullup,
|
|
|
|
.udc_start = langwell_start,
|
|
.udc_stop = langwell_stop,
|
|
};
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* device controller operations */
|
|
|
|
/* reset device controller */
|
|
static int langwell_udc_reset(struct langwell_udc *dev)
|
|
{
|
|
u32 usbcmd, usbmode, devlc, endpointlistaddr;
|
|
u8 devlc_byte0, devlc_byte2;
|
|
unsigned long timeout;
|
|
|
|
if (!dev)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* set controller to stop state */
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
usbcmd &= ~CMD_RUNSTOP;
|
|
writel(usbcmd, &dev->op_regs->usbcmd);
|
|
|
|
/* reset device controller */
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
usbcmd |= CMD_RST;
|
|
writel(usbcmd, &dev->op_regs->usbcmd);
|
|
|
|
/* wait for reset to complete */
|
|
timeout = jiffies + RESET_TIMEOUT;
|
|
while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_err(&dev->pdev->dev, "device reset timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
cpu_relax();
|
|
}
|
|
|
|
/* set controller to device mode */
|
|
usbmode = readl(&dev->op_regs->usbmode);
|
|
usbmode |= MODE_DEVICE;
|
|
|
|
/* turn setup lockout off, require setup tripwire in usbcmd */
|
|
usbmode |= MODE_SLOM;
|
|
|
|
writel(usbmode, &dev->op_regs->usbmode);
|
|
usbmode = readl(&dev->op_regs->usbmode);
|
|
dev_vdbg(&dev->pdev->dev, "usbmode=0x%08x\n", usbmode);
|
|
|
|
/* Write-Clear setup status */
|
|
writel(0, &dev->op_regs->usbsts);
|
|
|
|
/* if support USB LPM, ACK all LPM token */
|
|
if (dev->lpm) {
|
|
devlc = readl(&dev->op_regs->devlc);
|
|
dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
|
|
/* FIXME: workaround for Langwell A1/A2/A3 sighting */
|
|
devlc &= ~LPM_STL; /* don't STALL LPM token */
|
|
devlc &= ~LPM_NYT_ACK; /* ACK LPM token */
|
|
devlc_byte0 = devlc & 0xff;
|
|
devlc_byte2 = (devlc >> 16) & 0xff;
|
|
writeb(devlc_byte0, (u8 *)&dev->op_regs->devlc);
|
|
writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
|
|
devlc = readl(&dev->op_regs->devlc);
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"ACK LPM token, devlc = 0x%08x\n", devlc);
|
|
}
|
|
|
|
/* fill endpointlistaddr register */
|
|
endpointlistaddr = dev->ep_dqh_dma;
|
|
endpointlistaddr &= ENDPOINTLISTADDR_MASK;
|
|
writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
|
|
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
|
|
dev->ep_dqh, endpointlistaddr,
|
|
readl(&dev->op_regs->endpointlistaddr));
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* reinitialize device controller endpoints */
|
|
static int eps_reinit(struct langwell_udc *dev)
|
|
{
|
|
struct langwell_ep *ep;
|
|
char name[14];
|
|
int i;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* initialize ep0 */
|
|
ep = &dev->ep[0];
|
|
ep->dev = dev;
|
|
strncpy(ep->name, "ep0", sizeof(ep->name));
|
|
ep->ep.name = ep->name;
|
|
ep->ep.ops = &langwell_ep_ops;
|
|
ep->stopped = 0;
|
|
ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
|
|
ep->ep_num = 0;
|
|
ep->desc = &langwell_ep0_desc;
|
|
INIT_LIST_HEAD(&ep->queue);
|
|
|
|
ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
|
|
|
|
/* initialize other endpoints */
|
|
for (i = 2; i < dev->ep_max; i++) {
|
|
ep = &dev->ep[i];
|
|
if (i % 2)
|
|
snprintf(name, sizeof(name), "ep%din", i / 2);
|
|
else
|
|
snprintf(name, sizeof(name), "ep%dout", i / 2);
|
|
ep->dev = dev;
|
|
strncpy(ep->name, name, sizeof(ep->name));
|
|
ep->ep.name = ep->name;
|
|
|
|
ep->ep.ops = &langwell_ep_ops;
|
|
ep->stopped = 0;
|
|
ep->ep.maxpacket = (unsigned short) ~0;
|
|
ep->ep_num = i / 2;
|
|
|
|
INIT_LIST_HEAD(&ep->queue);
|
|
list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
|
|
}
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* enable interrupt and set controller to run state */
|
|
static void langwell_udc_start(struct langwell_udc *dev)
|
|
{
|
|
u32 usbintr, usbcmd;
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* enable interrupts */
|
|
usbintr = INTR_ULPIE /* ULPI */
|
|
| INTR_SLE /* suspend */
|
|
/* | INTR_SRE SOF received */
|
|
| INTR_URE /* USB reset */
|
|
| INTR_AAE /* async advance */
|
|
| INTR_SEE /* system error */
|
|
| INTR_FRE /* frame list rollover */
|
|
| INTR_PCE /* port change detect */
|
|
| INTR_UEE /* USB error interrupt */
|
|
| INTR_UE; /* USB interrupt */
|
|
writel(usbintr, &dev->op_regs->usbintr);
|
|
|
|
/* clear stopped bit */
|
|
dev->stopped = 0;
|
|
|
|
/* set controller to run */
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
usbcmd |= CMD_RUNSTOP;
|
|
writel(usbcmd, &dev->op_regs->usbcmd);
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* disable interrupt and set controller to stop state */
|
|
static void langwell_udc_stop(struct langwell_udc *dev)
|
|
{
|
|
u32 usbcmd;
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* disable all interrupts */
|
|
writel(0, &dev->op_regs->usbintr);
|
|
|
|
/* set stopped bit */
|
|
dev->stopped = 1;
|
|
|
|
/* set controller to stop state */
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
usbcmd &= ~CMD_RUNSTOP;
|
|
writel(usbcmd, &dev->op_regs->usbcmd);
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* stop all USB activities */
|
|
static void stop_activity(struct langwell_udc *dev,
|
|
struct usb_gadget_driver *driver)
|
|
{
|
|
struct langwell_ep *ep;
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
nuke(&dev->ep[0], -ESHUTDOWN);
|
|
|
|
list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
|
|
nuke(ep, -ESHUTDOWN);
|
|
}
|
|
|
|
/* report disconnect; the driver is already quiesced */
|
|
if (driver) {
|
|
spin_unlock(&dev->lock);
|
|
driver->disconnect(&dev->gadget);
|
|
spin_lock(&dev->lock);
|
|
}
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* device "function" sysfs attribute file */
|
|
static ssize_t show_function(struct device *_dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct langwell_udc *dev = dev_get_drvdata(_dev);
|
|
|
|
if (!dev->driver || !dev->driver->function
|
|
|| strlen(dev->driver->function) > PAGE_SIZE)
|
|
return 0;
|
|
|
|
return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
|
|
}
|
|
static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
|
|
|
|
|
|
static inline enum usb_device_speed lpm_device_speed(u32 reg)
|
|
{
|
|
switch (LPM_PSPD(reg)) {
|
|
case LPM_SPEED_HIGH:
|
|
return USB_SPEED_HIGH;
|
|
case LPM_SPEED_FULL:
|
|
return USB_SPEED_FULL;
|
|
case LPM_SPEED_LOW:
|
|
return USB_SPEED_LOW;
|
|
default:
|
|
return USB_SPEED_UNKNOWN;
|
|
}
|
|
}
|
|
|
|
/* device "langwell_udc" sysfs attribute file */
|
|
static ssize_t show_langwell_udc(struct device *_dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct langwell_udc *dev = dev_get_drvdata(_dev);
|
|
struct langwell_request *req;
|
|
struct langwell_ep *ep = NULL;
|
|
char *next;
|
|
unsigned size;
|
|
unsigned t;
|
|
unsigned i;
|
|
unsigned long flags;
|
|
u32 tmp_reg;
|
|
|
|
next = buf;
|
|
size = PAGE_SIZE;
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/* driver basic information */
|
|
t = scnprintf(next, size,
|
|
DRIVER_DESC "\n"
|
|
"%s version: %s\n"
|
|
"Gadget driver: %s\n\n",
|
|
driver_name, DRIVER_VERSION,
|
|
dev->driver ? dev->driver->driver.name : "(none)");
|
|
size -= t;
|
|
next += t;
|
|
|
|
/* device registers */
|
|
tmp_reg = readl(&dev->op_regs->usbcmd);
|
|
t = scnprintf(next, size,
|
|
"USBCMD reg:\n"
|
|
"SetupTW: %d\n"
|
|
"Run/Stop: %s\n\n",
|
|
(tmp_reg & CMD_SUTW) ? 1 : 0,
|
|
(tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp_reg = readl(&dev->op_regs->usbsts);
|
|
t = scnprintf(next, size,
|
|
"USB Status Reg:\n"
|
|
"Device Suspend: %d\n"
|
|
"Reset Received: %d\n"
|
|
"System Error: %s\n"
|
|
"USB Error Interrupt: %s\n\n",
|
|
(tmp_reg & STS_SLI) ? 1 : 0,
|
|
(tmp_reg & STS_URI) ? 1 : 0,
|
|
(tmp_reg & STS_SEI) ? "Error" : "No error",
|
|
(tmp_reg & STS_UEI) ? "Error detected" : "No error");
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp_reg = readl(&dev->op_regs->usbintr);
|
|
t = scnprintf(next, size,
|
|
"USB Intrrupt Enable Reg:\n"
|
|
"Sleep Enable: %d\n"
|
|
"SOF Received Enable: %d\n"
|
|
"Reset Enable: %d\n"
|
|
"System Error Enable: %d\n"
|
|
"Port Change Dectected Enable: %d\n"
|
|
"USB Error Intr Enable: %d\n"
|
|
"USB Intr Enable: %d\n\n",
|
|
(tmp_reg & INTR_SLE) ? 1 : 0,
|
|
(tmp_reg & INTR_SRE) ? 1 : 0,
|
|
(tmp_reg & INTR_URE) ? 1 : 0,
|
|
(tmp_reg & INTR_SEE) ? 1 : 0,
|
|
(tmp_reg & INTR_PCE) ? 1 : 0,
|
|
(tmp_reg & INTR_UEE) ? 1 : 0,
|
|
(tmp_reg & INTR_UE) ? 1 : 0);
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp_reg = readl(&dev->op_regs->frindex);
|
|
t = scnprintf(next, size,
|
|
"USB Frame Index Reg:\n"
|
|
"Frame Number is 0x%08x\n\n",
|
|
(tmp_reg & FRINDEX_MASK));
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp_reg = readl(&dev->op_regs->deviceaddr);
|
|
t = scnprintf(next, size,
|
|
"USB Device Address Reg:\n"
|
|
"Device Addr is 0x%x\n\n",
|
|
USBADR(tmp_reg));
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp_reg = readl(&dev->op_regs->endpointlistaddr);
|
|
t = scnprintf(next, size,
|
|
"USB Endpoint List Address Reg:\n"
|
|
"Endpoint List Pointer is 0x%x\n\n",
|
|
EPBASE(tmp_reg));
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp_reg = readl(&dev->op_regs->portsc1);
|
|
t = scnprintf(next, size,
|
|
"USB Port Status & Control Reg:\n"
|
|
"Port Reset: %s\n"
|
|
"Port Suspend Mode: %s\n"
|
|
"Over-current Change: %s\n"
|
|
"Port Enable/Disable Change: %s\n"
|
|
"Port Enabled/Disabled: %s\n"
|
|
"Current Connect Status: %s\n"
|
|
"LPM Suspend Status: %s\n\n",
|
|
(tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
|
|
(tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
|
|
(tmp_reg & PORTS_OCC) ? "Detected" : "No",
|
|
(tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
|
|
(tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
|
|
(tmp_reg & PORTS_CCS) ? "Attached" : "Not Attached",
|
|
(tmp_reg & PORTS_SLP) ? "LPM L1" : "LPM L0");
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp_reg = readl(&dev->op_regs->devlc);
|
|
t = scnprintf(next, size,
|
|
"Device LPM Control Reg:\n"
|
|
"Parallel Transceiver : %d\n"
|
|
"Serial Transceiver : %d\n"
|
|
"Port Speed: %s\n"
|
|
"Port Force Full Speed Connenct: %s\n"
|
|
"PHY Low Power Suspend Clock: %s\n"
|
|
"BmAttributes: %d\n\n",
|
|
LPM_PTS(tmp_reg),
|
|
(tmp_reg & LPM_STS) ? 1 : 0,
|
|
usb_speed_string(lpm_device_speed(tmp_reg)),
|
|
(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
|
|
(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
|
|
LPM_BA(tmp_reg));
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp_reg = readl(&dev->op_regs->usbmode);
|
|
t = scnprintf(next, size,
|
|
"USB Mode Reg:\n"
|
|
"Controller Mode is : %s\n\n", ({
|
|
char *s;
|
|
switch (MODE_CM(tmp_reg)) {
|
|
case MODE_IDLE:
|
|
s = "Idle"; break;
|
|
case MODE_DEVICE:
|
|
s = "Device Controller"; break;
|
|
case MODE_HOST:
|
|
s = "Host Controller"; break;
|
|
default:
|
|
s = "None"; break;
|
|
}
|
|
s;
|
|
}));
|
|
size -= t;
|
|
next += t;
|
|
|
|
tmp_reg = readl(&dev->op_regs->endptsetupstat);
|
|
t = scnprintf(next, size,
|
|
"Endpoint Setup Status Reg:\n"
|
|
"SETUP on ep 0x%04x\n\n",
|
|
tmp_reg & SETUPSTAT_MASK);
|
|
size -= t;
|
|
next += t;
|
|
|
|
for (i = 0; i < dev->ep_max / 2; i++) {
|
|
tmp_reg = readl(&dev->op_regs->endptctrl[i]);
|
|
t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
|
|
i, tmp_reg);
|
|
size -= t;
|
|
next += t;
|
|
}
|
|
tmp_reg = readl(&dev->op_regs->endptprime);
|
|
t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
|
|
size -= t;
|
|
next += t;
|
|
|
|
/* langwell_udc, langwell_ep, langwell_request structure information */
|
|
ep = &dev->ep[0];
|
|
t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
|
|
ep->ep.name, ep->ep.maxpacket, ep->ep_num);
|
|
size -= t;
|
|
next += t;
|
|
|
|
if (list_empty(&ep->queue)) {
|
|
t = scnprintf(next, size, "its req queue is empty\n\n");
|
|
size -= t;
|
|
next += t;
|
|
} else {
|
|
list_for_each_entry(req, &ep->queue, queue) {
|
|
t = scnprintf(next, size,
|
|
"req %p actual 0x%x length 0x%x buf %p\n",
|
|
&req->req, req->req.actual,
|
|
req->req.length, req->req.buf);
|
|
size -= t;
|
|
next += t;
|
|
}
|
|
}
|
|
/* other gadget->eplist ep */
|
|
list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
|
|
if (ep->desc) {
|
|
t = scnprintf(next, size,
|
|
"\n%s MaxPacketSize: 0x%x, "
|
|
"ep_num: %d\n",
|
|
ep->ep.name, ep->ep.maxpacket,
|
|
ep->ep_num);
|
|
size -= t;
|
|
next += t;
|
|
|
|
if (list_empty(&ep->queue)) {
|
|
t = scnprintf(next, size,
|
|
"its req queue is empty\n\n");
|
|
size -= t;
|
|
next += t;
|
|
} else {
|
|
list_for_each_entry(req, &ep->queue, queue) {
|
|
t = scnprintf(next, size,
|
|
"req %p actual 0x%x length "
|
|
"0x%x buf %p\n",
|
|
&req->req, req->req.actual,
|
|
req->req.length, req->req.buf);
|
|
size -= t;
|
|
next += t;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
return PAGE_SIZE - size;
|
|
}
|
|
static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
|
|
|
|
|
|
/* device "remote_wakeup" sysfs attribute file */
|
|
static ssize_t store_remote_wakeup(struct device *_dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct langwell_udc *dev = dev_get_drvdata(_dev);
|
|
unsigned long flags;
|
|
ssize_t rc = count;
|
|
|
|
if (count > 2)
|
|
return -EINVAL;
|
|
|
|
if (count > 0 && buf[count-1] == '\n')
|
|
((char *) buf)[count-1] = 0;
|
|
|
|
if (buf[0] != '1')
|
|
return -EINVAL;
|
|
|
|
/* force remote wakeup enabled in case gadget driver doesn't support */
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
dev->remote_wakeup = 1;
|
|
dev->dev_status |= (1 << USB_DEVICE_REMOTE_WAKEUP);
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
langwell_wakeup(&dev->gadget);
|
|
|
|
return rc;
|
|
}
|
|
static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* when a driver is successfully registered, it will receive
|
|
* control requests including set_configuration(), which enables
|
|
* non-control requests. then usb traffic follows until a
|
|
* disconnect is reported. then a host may connect again, or
|
|
* the driver might get unbound.
|
|
*/
|
|
|
|
static int langwell_start(struct usb_gadget *g,
|
|
struct usb_gadget_driver *driver)
|
|
{
|
|
struct langwell_udc *dev = gadget_to_langwell(g);
|
|
unsigned long flags;
|
|
int retval;
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/* hook up the driver ... */
|
|
driver->driver.bus = NULL;
|
|
dev->driver = driver;
|
|
dev->gadget.dev.driver = &driver->driver;
|
|
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
|
|
if (retval)
|
|
goto err;
|
|
|
|
dev->usb_state = USB_STATE_ATTACHED;
|
|
dev->ep0_state = WAIT_FOR_SETUP;
|
|
dev->ep0_dir = USB_DIR_OUT;
|
|
|
|
/* enable interrupt and set controller to run state */
|
|
if (dev->got_irq)
|
|
langwell_udc_start(dev);
|
|
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"After langwell_udc_start(), print all registers:\n");
|
|
print_all_registers(dev);
|
|
|
|
dev_info(&dev->pdev->dev, "register driver: %s\n",
|
|
driver->driver.name);
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev->gadget.dev.driver = NULL;
|
|
dev->driver = NULL;
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* unregister gadget driver */
|
|
static int langwell_stop(struct usb_gadget *g,
|
|
struct usb_gadget_driver *driver)
|
|
{
|
|
struct langwell_udc *dev = gadget_to_langwell(g);
|
|
unsigned long flags;
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* exit PHY low power suspend */
|
|
if (dev->pdev->device != 0x0829)
|
|
langwell_phy_low_power(dev, 0);
|
|
|
|
/* unbind OTG transceiver */
|
|
if (dev->transceiver)
|
|
(void)otg_set_peripheral(dev->transceiver, 0);
|
|
|
|
/* disable interrupt and set controller to stop state */
|
|
langwell_udc_stop(dev);
|
|
|
|
dev->usb_state = USB_STATE_ATTACHED;
|
|
dev->ep0_state = WAIT_FOR_SETUP;
|
|
dev->ep0_dir = USB_DIR_OUT;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
|
|
/* stop all usb activities */
|
|
dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
stop_activity(dev, driver);
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
dev->gadget.dev.driver = NULL;
|
|
dev->driver = NULL;
|
|
|
|
device_remove_file(&dev->pdev->dev, &dev_attr_function);
|
|
|
|
dev_info(&dev->pdev->dev, "unregistered driver '%s'\n",
|
|
driver->driver.name);
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* setup tripwire is used as a semaphore to ensure that the setup data
|
|
* payload is extracted from a dQH without being corrupted
|
|
*/
|
|
static void setup_tripwire(struct langwell_udc *dev)
|
|
{
|
|
u32 usbcmd,
|
|
endptsetupstat;
|
|
unsigned long timeout;
|
|
struct langwell_dqh *dqh;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* ep0 OUT dQH */
|
|
dqh = &dev->ep_dqh[EP_DIR_OUT];
|
|
|
|
/* Write-Clear endptsetupstat */
|
|
endptsetupstat = readl(&dev->op_regs->endptsetupstat);
|
|
writel(endptsetupstat, &dev->op_regs->endptsetupstat);
|
|
|
|
/* wait until endptsetupstat is cleared */
|
|
timeout = jiffies + SETUPSTAT_TIMEOUT;
|
|
while (readl(&dev->op_regs->endptsetupstat)) {
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_err(&dev->pdev->dev, "setup_tripwire timeout\n");
|
|
break;
|
|
}
|
|
cpu_relax();
|
|
}
|
|
|
|
/* while a hazard exists when setup packet arrives */
|
|
do {
|
|
/* set setup tripwire bit */
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
|
|
|
|
/* copy the setup packet to local buffer */
|
|
memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
|
|
} while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
|
|
|
|
/* Write-Clear setup tripwire bit */
|
|
usbcmd = readl(&dev->op_regs->usbcmd);
|
|
writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* protocol ep0 stall, will automatically be cleared on new transaction */
|
|
static void ep0_stall(struct langwell_udc *dev)
|
|
{
|
|
u32 endptctrl;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* set TX and RX to stall */
|
|
endptctrl = readl(&dev->op_regs->endptctrl[0]);
|
|
endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
|
|
writel(endptctrl, &dev->op_regs->endptctrl[0]);
|
|
|
|
/* update ep0 state */
|
|
dev->ep0_state = WAIT_FOR_SETUP;
|
|
dev->ep0_dir = USB_DIR_OUT;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* PRIME a status phase for ep0 */
|
|
static int prime_status_phase(struct langwell_udc *dev, int dir)
|
|
{
|
|
struct langwell_request *req;
|
|
struct langwell_ep *ep;
|
|
int status = 0;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (dir == EP_DIR_IN)
|
|
dev->ep0_dir = USB_DIR_IN;
|
|
else
|
|
dev->ep0_dir = USB_DIR_OUT;
|
|
|
|
ep = &dev->ep[0];
|
|
dev->ep0_state = WAIT_FOR_OUT_STATUS;
|
|
|
|
req = dev->status_req;
|
|
|
|
req->ep = ep;
|
|
req->req.length = 0;
|
|
req->req.status = -EINPROGRESS;
|
|
req->req.actual = 0;
|
|
req->req.complete = NULL;
|
|
req->dtd_count = 0;
|
|
|
|
if (!req_to_dtd(req))
|
|
status = queue_dtd(ep, req);
|
|
else
|
|
return -ENOMEM;
|
|
|
|
if (status)
|
|
dev_err(&dev->pdev->dev, "can't queue ep0 status request\n");
|
|
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return status;
|
|
}
|
|
|
|
|
|
/* SET_ADDRESS request routine */
|
|
static void set_address(struct langwell_udc *dev, u16 value,
|
|
u16 index, u16 length)
|
|
{
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* save the new address to device struct */
|
|
dev->dev_addr = (u8) value;
|
|
dev_vdbg(&dev->pdev->dev, "dev->dev_addr = %d\n", dev->dev_addr);
|
|
|
|
/* update usb state */
|
|
dev->usb_state = USB_STATE_ADDRESS;
|
|
|
|
/* STATUS phase */
|
|
if (prime_status_phase(dev, EP_DIR_IN))
|
|
ep0_stall(dev);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* return endpoint by windex */
|
|
static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
|
|
u16 wIndex)
|
|
{
|
|
struct langwell_ep *ep;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
|
|
return &dev->ep[0];
|
|
|
|
list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
|
|
u8 bEndpointAddress;
|
|
if (!ep->desc)
|
|
continue;
|
|
|
|
bEndpointAddress = ep->desc->bEndpointAddress;
|
|
if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
|
|
continue;
|
|
|
|
if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
|
|
== (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
|
|
return ep;
|
|
}
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return NULL;
|
|
}
|
|
|
|
|
|
/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
|
|
static int ep_is_stall(struct langwell_ep *ep)
|
|
{
|
|
struct langwell_udc *dev = ep->dev;
|
|
u32 endptctrl;
|
|
int retval;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
|
|
if (is_in(ep))
|
|
retval = endptctrl & EPCTRL_TXS ? 1 : 0;
|
|
else
|
|
retval = endptctrl & EPCTRL_RXS ? 1 : 0;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* GET_STATUS request routine */
|
|
static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
|
|
u16 index, u16 length)
|
|
{
|
|
struct langwell_request *req;
|
|
struct langwell_ep *ep;
|
|
u16 status_data = 0; /* 16 bits cpu view status data */
|
|
int status = 0;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
ep = &dev->ep[0];
|
|
|
|
if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
|
|
/* get device status */
|
|
status_data = dev->dev_status;
|
|
} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
|
|
/* get interface status */
|
|
status_data = 0;
|
|
} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
|
|
/* get endpoint status */
|
|
struct langwell_ep *epn;
|
|
epn = get_ep_by_windex(dev, index);
|
|
/* stall if endpoint doesn't exist */
|
|
if (!epn)
|
|
goto stall;
|
|
|
|
status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
|
|
}
|
|
|
|
dev_dbg(&dev->pdev->dev, "get status data: 0x%04x\n", status_data);
|
|
|
|
dev->ep0_dir = USB_DIR_IN;
|
|
|
|
/* borrow the per device status_req */
|
|
req = dev->status_req;
|
|
|
|
/* fill in the reqest structure */
|
|
*((u16 *) req->req.buf) = cpu_to_le16(status_data);
|
|
req->ep = ep;
|
|
req->req.length = 2;
|
|
req->req.status = -EINPROGRESS;
|
|
req->req.actual = 0;
|
|
req->req.complete = NULL;
|
|
req->dtd_count = 0;
|
|
|
|
/* prime the data phase */
|
|
if (!req_to_dtd(req))
|
|
status = queue_dtd(ep, req);
|
|
else /* no mem */
|
|
goto stall;
|
|
|
|
if (status) {
|
|
dev_err(&dev->pdev->dev,
|
|
"response error on GET_STATUS request\n");
|
|
goto stall;
|
|
}
|
|
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
dev->ep0_state = DATA_STATE_XMIT;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return;
|
|
stall:
|
|
ep0_stall(dev);
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* setup packet interrupt handler */
|
|
static void handle_setup_packet(struct langwell_udc *dev,
|
|
struct usb_ctrlrequest *setup)
|
|
{
|
|
u16 wValue = le16_to_cpu(setup->wValue);
|
|
u16 wIndex = le16_to_cpu(setup->wIndex);
|
|
u16 wLength = le16_to_cpu(setup->wLength);
|
|
u32 portsc1;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* ep0 fifo flush */
|
|
nuke(&dev->ep[0], -ESHUTDOWN);
|
|
|
|
dev_dbg(&dev->pdev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
|
|
setup->bRequestType, setup->bRequest,
|
|
wValue, wIndex, wLength);
|
|
|
|
/* RNDIS gadget delegate */
|
|
if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
|
|
/* USB_CDC_SEND_ENCAPSULATED_COMMAND */
|
|
goto delegate;
|
|
}
|
|
|
|
/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
|
|
if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
|
|
/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
|
|
goto delegate;
|
|
}
|
|
|
|
/* We process some stardard setup requests here */
|
|
switch (setup->bRequest) {
|
|
case USB_REQ_GET_STATUS:
|
|
dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_GET_STATUS\n");
|
|
/* get status, DATA and STATUS phase */
|
|
if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
|
|
!= (USB_DIR_IN | USB_TYPE_STANDARD))
|
|
break;
|
|
get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
|
|
goto end;
|
|
|
|
case USB_REQ_SET_ADDRESS:
|
|
dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_SET_ADDRESS\n");
|
|
/* STATUS phase */
|
|
if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
|
|
| USB_RECIP_DEVICE))
|
|
break;
|
|
set_address(dev, wValue, wIndex, wLength);
|
|
goto end;
|
|
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
case USB_REQ_SET_FEATURE:
|
|
/* STATUS phase */
|
|
{
|
|
int rc = -EOPNOTSUPP;
|
|
if (setup->bRequest == USB_REQ_SET_FEATURE)
|
|
dev_dbg(&dev->pdev->dev,
|
|
"SETUP: USB_REQ_SET_FEATURE\n");
|
|
else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
|
|
dev_dbg(&dev->pdev->dev,
|
|
"SETUP: USB_REQ_CLEAR_FEATURE\n");
|
|
|
|
if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
|
|
== (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
|
|
struct langwell_ep *epn;
|
|
epn = get_ep_by_windex(dev, wIndex);
|
|
/* stall if endpoint doesn't exist */
|
|
if (!epn) {
|
|
ep0_stall(dev);
|
|
goto end;
|
|
}
|
|
|
|
if (wValue != 0 || wLength != 0
|
|
|| epn->ep_num > dev->ep_max)
|
|
break;
|
|
|
|
spin_unlock(&dev->lock);
|
|
rc = langwell_ep_set_halt(&epn->ep,
|
|
(setup->bRequest == USB_REQ_SET_FEATURE)
|
|
? 1 : 0);
|
|
spin_lock(&dev->lock);
|
|
|
|
} else if ((setup->bRequestType & (USB_RECIP_MASK
|
|
| USB_TYPE_MASK)) == (USB_RECIP_DEVICE
|
|
| USB_TYPE_STANDARD)) {
|
|
rc = 0;
|
|
switch (wValue) {
|
|
case USB_DEVICE_REMOTE_WAKEUP:
|
|
if (setup->bRequest == USB_REQ_SET_FEATURE) {
|
|
dev->remote_wakeup = 1;
|
|
dev->dev_status |= (1 << wValue);
|
|
} else {
|
|
dev->remote_wakeup = 0;
|
|
dev->dev_status &= ~(1 << wValue);
|
|
}
|
|
break;
|
|
case USB_DEVICE_TEST_MODE:
|
|
dev_dbg(&dev->pdev->dev, "SETUP: TEST MODE\n");
|
|
if ((wIndex & 0xff) ||
|
|
(dev->gadget.speed != USB_SPEED_HIGH))
|
|
ep0_stall(dev);
|
|
|
|
switch (wIndex >> 8) {
|
|
case TEST_J:
|
|
case TEST_K:
|
|
case TEST_SE0_NAK:
|
|
case TEST_PACKET:
|
|
case TEST_FORCE_EN:
|
|
if (prime_status_phase(dev, EP_DIR_IN))
|
|
ep0_stall(dev);
|
|
portsc1 = readl(&dev->op_regs->portsc1);
|
|
portsc1 |= (wIndex & 0xf00) << 8;
|
|
writel(portsc1, &dev->op_regs->portsc1);
|
|
goto end;
|
|
default:
|
|
rc = -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
default:
|
|
rc = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
if (!gadget_is_otg(&dev->gadget))
|
|
break;
|
|
else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
|
|
dev->gadget.b_hnp_enable = 1;
|
|
#ifdef OTG_TRANSCEIVER
|
|
if (!dev->lotg->otg.default_a)
|
|
dev->lotg->hsm.b_hnp_enable = 1;
|
|
#endif
|
|
} else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
|
|
dev->gadget.a_hnp_support = 1;
|
|
else if (setup->bRequest ==
|
|
USB_DEVICE_A_ALT_HNP_SUPPORT)
|
|
dev->gadget.a_alt_hnp_support = 1;
|
|
else
|
|
break;
|
|
} else
|
|
break;
|
|
|
|
if (rc == 0) {
|
|
if (prime_status_phase(dev, EP_DIR_IN))
|
|
ep0_stall(dev);
|
|
}
|
|
goto end;
|
|
}
|
|
|
|
case USB_REQ_GET_DESCRIPTOR:
|
|
dev_dbg(&dev->pdev->dev,
|
|
"SETUP: USB_REQ_GET_DESCRIPTOR\n");
|
|
goto delegate;
|
|
|
|
case USB_REQ_SET_DESCRIPTOR:
|
|
dev_dbg(&dev->pdev->dev,
|
|
"SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
|
|
goto delegate;
|
|
|
|
case USB_REQ_GET_CONFIGURATION:
|
|
dev_dbg(&dev->pdev->dev,
|
|
"SETUP: USB_REQ_GET_CONFIGURATION\n");
|
|
goto delegate;
|
|
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
dev_dbg(&dev->pdev->dev,
|
|
"SETUP: USB_REQ_SET_CONFIGURATION\n");
|
|
goto delegate;
|
|
|
|
case USB_REQ_GET_INTERFACE:
|
|
dev_dbg(&dev->pdev->dev,
|
|
"SETUP: USB_REQ_GET_INTERFACE\n");
|
|
goto delegate;
|
|
|
|
case USB_REQ_SET_INTERFACE:
|
|
dev_dbg(&dev->pdev->dev,
|
|
"SETUP: USB_REQ_SET_INTERFACE\n");
|
|
goto delegate;
|
|
|
|
case USB_REQ_SYNCH_FRAME:
|
|
dev_dbg(&dev->pdev->dev,
|
|
"SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
|
|
goto delegate;
|
|
|
|
default:
|
|
/* delegate USB standard requests to the gadget driver */
|
|
goto delegate;
|
|
delegate:
|
|
/* USB requests handled by gadget */
|
|
if (wLength) {
|
|
/* DATA phase from gadget, STATUS phase from udc */
|
|
dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
|
|
? USB_DIR_IN : USB_DIR_OUT;
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"dev->ep0_dir = 0x%x, wLength = %d\n",
|
|
dev->ep0_dir, wLength);
|
|
spin_unlock(&dev->lock);
|
|
if (dev->driver->setup(&dev->gadget,
|
|
&dev->local_setup_buff) < 0)
|
|
ep0_stall(dev);
|
|
spin_lock(&dev->lock);
|
|
dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
|
|
? DATA_STATE_XMIT : DATA_STATE_RECV;
|
|
} else {
|
|
/* no DATA phase, IN STATUS phase from gadget */
|
|
dev->ep0_dir = USB_DIR_IN;
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"dev->ep0_dir = 0x%x, wLength = %d\n",
|
|
dev->ep0_dir, wLength);
|
|
spin_unlock(&dev->lock);
|
|
if (dev->driver->setup(&dev->gadget,
|
|
&dev->local_setup_buff) < 0)
|
|
ep0_stall(dev);
|
|
spin_lock(&dev->lock);
|
|
dev->ep0_state = WAIT_FOR_OUT_STATUS;
|
|
}
|
|
break;
|
|
}
|
|
end:
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* transfer completion, process endpoint request and free the completed dTDs
|
|
* for this request
|
|
*/
|
|
static int process_ep_req(struct langwell_udc *dev, int index,
|
|
struct langwell_request *curr_req)
|
|
{
|
|
struct langwell_dtd *curr_dtd;
|
|
struct langwell_dqh *curr_dqh;
|
|
int td_complete, actual, remaining_length;
|
|
int i, dir;
|
|
u8 dtd_status = 0;
|
|
int retval = 0;
|
|
|
|
curr_dqh = &dev->ep_dqh[index];
|
|
dir = index % 2;
|
|
|
|
curr_dtd = curr_req->head;
|
|
td_complete = 0;
|
|
actual = curr_req->req.length;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
for (i = 0; i < curr_req->dtd_count; i++) {
|
|
|
|
/* command execution states by dTD */
|
|
dtd_status = curr_dtd->dtd_status;
|
|
|
|
barrier();
|
|
remaining_length = le16_to_cpu(curr_dtd->dtd_total);
|
|
actual -= remaining_length;
|
|
|
|
if (!dtd_status) {
|
|
/* transfers completed successfully */
|
|
if (!remaining_length) {
|
|
td_complete++;
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"dTD transmitted successfully\n");
|
|
} else {
|
|
if (dir) {
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"TX dTD remains data\n");
|
|
retval = -EPROTO;
|
|
break;
|
|
|
|
} else {
|
|
td_complete++;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
/* transfers completed with errors */
|
|
if (dtd_status & DTD_STS_ACTIVE) {
|
|
dev_dbg(&dev->pdev->dev,
|
|
"dTD status ACTIVE dQH[%d]\n", index);
|
|
retval = 1;
|
|
return retval;
|
|
} else if (dtd_status & DTD_STS_HALTED) {
|
|
dev_err(&dev->pdev->dev,
|
|
"dTD error %08x dQH[%d]\n",
|
|
dtd_status, index);
|
|
/* clear the errors and halt condition */
|
|
curr_dqh->dtd_status = 0;
|
|
retval = -EPIPE;
|
|
break;
|
|
} else if (dtd_status & DTD_STS_DBE) {
|
|
dev_dbg(&dev->pdev->dev,
|
|
"data buffer (overflow) error\n");
|
|
retval = -EPROTO;
|
|
break;
|
|
} else if (dtd_status & DTD_STS_TRE) {
|
|
dev_dbg(&dev->pdev->dev,
|
|
"transaction(ISO) error\n");
|
|
retval = -EILSEQ;
|
|
break;
|
|
} else
|
|
dev_err(&dev->pdev->dev,
|
|
"unknown error (0x%x)!\n",
|
|
dtd_status);
|
|
}
|
|
|
|
if (i != curr_req->dtd_count - 1)
|
|
curr_dtd = (struct langwell_dtd *)
|
|
curr_dtd->next_dtd_virt;
|
|
}
|
|
|
|
if (retval)
|
|
return retval;
|
|
|
|
curr_req->req.actual = actual;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* complete DATA or STATUS phase of ep0 prime status phase if needed */
|
|
static void ep0_req_complete(struct langwell_udc *dev,
|
|
struct langwell_ep *ep0, struct langwell_request *req)
|
|
{
|
|
u32 new_addr;
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (dev->usb_state == USB_STATE_ADDRESS) {
|
|
/* set the new address */
|
|
new_addr = (u32)dev->dev_addr;
|
|
writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
|
|
|
|
new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
|
|
dev_vdbg(&dev->pdev->dev, "new_addr = %d\n", new_addr);
|
|
}
|
|
|
|
done(ep0, req, 0);
|
|
|
|
switch (dev->ep0_state) {
|
|
case DATA_STATE_XMIT:
|
|
/* receive status phase */
|
|
if (prime_status_phase(dev, EP_DIR_OUT))
|
|
ep0_stall(dev);
|
|
break;
|
|
case DATA_STATE_RECV:
|
|
/* send status phase */
|
|
if (prime_status_phase(dev, EP_DIR_IN))
|
|
ep0_stall(dev);
|
|
break;
|
|
case WAIT_FOR_OUT_STATUS:
|
|
dev->ep0_state = WAIT_FOR_SETUP;
|
|
break;
|
|
case WAIT_FOR_SETUP:
|
|
dev_err(&dev->pdev->dev, "unexpect ep0 packets\n");
|
|
break;
|
|
default:
|
|
ep0_stall(dev);
|
|
break;
|
|
}
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* USB transfer completion interrupt */
|
|
static void handle_trans_complete(struct langwell_udc *dev)
|
|
{
|
|
u32 complete_bits;
|
|
int i, ep_num, dir, bit_mask, status;
|
|
struct langwell_ep *epn;
|
|
struct langwell_request *curr_req, *temp_req;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
complete_bits = readl(&dev->op_regs->endptcomplete);
|
|
dev_vdbg(&dev->pdev->dev, "endptcomplete register: 0x%08x\n",
|
|
complete_bits);
|
|
|
|
/* Write-Clear the bits in endptcomplete register */
|
|
writel(complete_bits, &dev->op_regs->endptcomplete);
|
|
|
|
if (!complete_bits) {
|
|
dev_dbg(&dev->pdev->dev, "complete_bits = 0\n");
|
|
goto done;
|
|
}
|
|
|
|
for (i = 0; i < dev->ep_max; i++) {
|
|
ep_num = i / 2;
|
|
dir = i % 2;
|
|
|
|
bit_mask = 1 << (ep_num + 16 * dir);
|
|
|
|
if (!(complete_bits & bit_mask))
|
|
continue;
|
|
|
|
/* ep0 */
|
|
if (i == 1)
|
|
epn = &dev->ep[0];
|
|
else
|
|
epn = &dev->ep[i];
|
|
|
|
if (epn->name == NULL) {
|
|
dev_warn(&dev->pdev->dev, "invalid endpoint\n");
|
|
continue;
|
|
}
|
|
|
|
if (i < 2)
|
|
/* ep0 in and out */
|
|
dev_dbg(&dev->pdev->dev, "%s-%s transfer completed\n",
|
|
epn->name,
|
|
is_in(epn) ? "in" : "out");
|
|
else
|
|
dev_dbg(&dev->pdev->dev, "%s transfer completed\n",
|
|
epn->name);
|
|
|
|
/* process the req queue until an uncomplete request */
|
|
list_for_each_entry_safe(curr_req, temp_req,
|
|
&epn->queue, queue) {
|
|
status = process_ep_req(dev, i, curr_req);
|
|
dev_vdbg(&dev->pdev->dev, "%s req status: %d\n",
|
|
epn->name, status);
|
|
|
|
if (status)
|
|
break;
|
|
|
|
/* write back status to req */
|
|
curr_req->req.status = status;
|
|
|
|
/* ep0 request completion */
|
|
if (ep_num == 0) {
|
|
ep0_req_complete(dev, epn, curr_req);
|
|
break;
|
|
} else {
|
|
done(epn, curr_req, status);
|
|
}
|
|
}
|
|
}
|
|
done:
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
/* port change detect interrupt handler */
|
|
static void handle_port_change(struct langwell_udc *dev)
|
|
{
|
|
u32 portsc1, devlc;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (dev->bus_reset)
|
|
dev->bus_reset = 0;
|
|
|
|
portsc1 = readl(&dev->op_regs->portsc1);
|
|
devlc = readl(&dev->op_regs->devlc);
|
|
dev_vdbg(&dev->pdev->dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
|
|
portsc1, devlc);
|
|
|
|
/* bus reset is finished */
|
|
if (!(portsc1 & PORTS_PR)) {
|
|
/* get the speed */
|
|
dev->gadget.speed = lpm_device_speed(devlc);
|
|
dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
|
|
dev->gadget.speed);
|
|
}
|
|
|
|
/* LPM L0 to L1 */
|
|
if (dev->lpm && dev->lpm_state == LPM_L0)
|
|
if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
|
|
dev_info(&dev->pdev->dev, "LPM L0 to L1\n");
|
|
dev->lpm_state = LPM_L1;
|
|
}
|
|
|
|
/* LPM L1 to L0, force resume or remote wakeup finished */
|
|
if (dev->lpm && dev->lpm_state == LPM_L1)
|
|
if (!(portsc1 & PORTS_SUSP)) {
|
|
dev_info(&dev->pdev->dev, "LPM L1 to L0\n");
|
|
dev->lpm_state = LPM_L0;
|
|
}
|
|
|
|
/* update USB state */
|
|
if (!dev->resume_state)
|
|
dev->usb_state = USB_STATE_DEFAULT;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* USB reset interrupt handler */
|
|
static void handle_usb_reset(struct langwell_udc *dev)
|
|
{
|
|
u32 deviceaddr,
|
|
endptsetupstat,
|
|
endptcomplete;
|
|
unsigned long timeout;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* Write-Clear the device address */
|
|
deviceaddr = readl(&dev->op_regs->deviceaddr);
|
|
writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
|
|
|
|
dev->dev_addr = 0;
|
|
|
|
/* clear usb state */
|
|
dev->resume_state = 0;
|
|
|
|
/* LPM L1 to L0, reset */
|
|
if (dev->lpm)
|
|
dev->lpm_state = LPM_L0;
|
|
|
|
dev->ep0_dir = USB_DIR_OUT;
|
|
dev->ep0_state = WAIT_FOR_SETUP;
|
|
|
|
/* remote wakeup reset to 0 when the device is reset */
|
|
dev->remote_wakeup = 0;
|
|
dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
|
|
dev->gadget.b_hnp_enable = 0;
|
|
dev->gadget.a_hnp_support = 0;
|
|
dev->gadget.a_alt_hnp_support = 0;
|
|
|
|
/* Write-Clear all the setup token semaphores */
|
|
endptsetupstat = readl(&dev->op_regs->endptsetupstat);
|
|
writel(endptsetupstat, &dev->op_regs->endptsetupstat);
|
|
|
|
/* Write-Clear all the endpoint complete status bits */
|
|
endptcomplete = readl(&dev->op_regs->endptcomplete);
|
|
writel(endptcomplete, &dev->op_regs->endptcomplete);
|
|
|
|
/* wait until all endptprime bits cleared */
|
|
timeout = jiffies + PRIME_TIMEOUT;
|
|
while (readl(&dev->op_regs->endptprime)) {
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_err(&dev->pdev->dev, "USB reset timeout\n");
|
|
break;
|
|
}
|
|
cpu_relax();
|
|
}
|
|
|
|
/* write 1s to endptflush register to clear any primed buffers */
|
|
writel((u32) ~0, &dev->op_regs->endptflush);
|
|
|
|
if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
|
|
dev_vdbg(&dev->pdev->dev, "USB bus reset\n");
|
|
/* bus is reseting */
|
|
dev->bus_reset = 1;
|
|
|
|
/* reset all the queues, stop all USB activities */
|
|
stop_activity(dev, dev->driver);
|
|
dev->usb_state = USB_STATE_DEFAULT;
|
|
} else {
|
|
dev_vdbg(&dev->pdev->dev, "device controller reset\n");
|
|
/* controller reset */
|
|
langwell_udc_reset(dev);
|
|
|
|
/* reset all the queues, stop all USB activities */
|
|
stop_activity(dev, dev->driver);
|
|
|
|
/* reset ep0 dQH and endptctrl */
|
|
ep0_reset(dev);
|
|
|
|
/* enable interrupt and set controller to run state */
|
|
langwell_udc_start(dev);
|
|
|
|
dev->usb_state = USB_STATE_ATTACHED;
|
|
}
|
|
|
|
#ifdef OTG_TRANSCEIVER
|
|
/* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
|
|
if (!dev->lotg->otg.default_a)
|
|
dev->lotg->hsm.b_hnp_enable = 0;
|
|
#endif
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* USB bus suspend/resume interrupt */
|
|
static void handle_bus_suspend(struct langwell_udc *dev)
|
|
{
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
dev->resume_state = dev->usb_state;
|
|
dev->usb_state = USB_STATE_SUSPENDED;
|
|
|
|
#ifdef OTG_TRANSCEIVER
|
|
if (dev->lotg->otg.default_a) {
|
|
if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
|
|
dev->lotg->hsm.b_bus_suspend = 1;
|
|
/* notify transceiver the state changes */
|
|
if (spin_trylock(&dev->lotg->wq_lock)) {
|
|
langwell_update_transceiver();
|
|
spin_unlock(&dev->lotg->wq_lock);
|
|
}
|
|
}
|
|
dev->lotg->hsm.b_bus_suspend_vld++;
|
|
} else {
|
|
if (!dev->lotg->hsm.a_bus_suspend) {
|
|
dev->lotg->hsm.a_bus_suspend = 1;
|
|
/* notify transceiver the state changes */
|
|
if (spin_trylock(&dev->lotg->wq_lock)) {
|
|
langwell_update_transceiver();
|
|
spin_unlock(&dev->lotg->wq_lock);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* report suspend to the driver */
|
|
if (dev->driver) {
|
|
if (dev->driver->suspend) {
|
|
spin_unlock(&dev->lock);
|
|
dev->driver->suspend(&dev->gadget);
|
|
spin_lock(&dev->lock);
|
|
dev_dbg(&dev->pdev->dev, "suspend %s\n",
|
|
dev->driver->driver.name);
|
|
}
|
|
}
|
|
|
|
/* enter PHY low power suspend */
|
|
if (dev->pdev->device != 0x0829)
|
|
langwell_phy_low_power(dev, 0);
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
static void handle_bus_resume(struct langwell_udc *dev)
|
|
{
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
dev->usb_state = dev->resume_state;
|
|
dev->resume_state = 0;
|
|
|
|
/* exit PHY low power suspend */
|
|
if (dev->pdev->device != 0x0829)
|
|
langwell_phy_low_power(dev, 0);
|
|
|
|
#ifdef OTG_TRANSCEIVER
|
|
if (dev->lotg->otg.default_a == 0)
|
|
dev->lotg->hsm.a_bus_suspend = 0;
|
|
#endif
|
|
|
|
/* report resume to the driver */
|
|
if (dev->driver) {
|
|
if (dev->driver->resume) {
|
|
spin_unlock(&dev->lock);
|
|
dev->driver->resume(&dev->gadget);
|
|
spin_lock(&dev->lock);
|
|
dev_dbg(&dev->pdev->dev, "resume %s\n",
|
|
dev->driver->driver.name);
|
|
}
|
|
}
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* USB device controller interrupt handler */
|
|
static irqreturn_t langwell_irq(int irq, void *_dev)
|
|
{
|
|
struct langwell_udc *dev = _dev;
|
|
u32 usbsts,
|
|
usbintr,
|
|
irq_sts,
|
|
portsc1;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
if (dev->stopped) {
|
|
dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
spin_lock(&dev->lock);
|
|
|
|
/* USB status */
|
|
usbsts = readl(&dev->op_regs->usbsts);
|
|
|
|
/* USB interrupt enable */
|
|
usbintr = readl(&dev->op_regs->usbintr);
|
|
|
|
irq_sts = usbsts & usbintr;
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
|
|
usbsts, usbintr, irq_sts);
|
|
|
|
if (!irq_sts) {
|
|
dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
spin_unlock(&dev->lock);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Write-Clear interrupt status bits */
|
|
writel(irq_sts, &dev->op_regs->usbsts);
|
|
|
|
/* resume from suspend */
|
|
portsc1 = readl(&dev->op_regs->portsc1);
|
|
if (dev->usb_state == USB_STATE_SUSPENDED)
|
|
if (!(portsc1 & PORTS_SUSP))
|
|
handle_bus_resume(dev);
|
|
|
|
/* USB interrupt */
|
|
if (irq_sts & STS_UI) {
|
|
dev_vdbg(&dev->pdev->dev, "USB interrupt\n");
|
|
|
|
/* setup packet received from ep0 */
|
|
if (readl(&dev->op_regs->endptsetupstat)
|
|
& EP0SETUPSTAT_MASK) {
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"USB SETUP packet received interrupt\n");
|
|
/* setup tripwire semaphone */
|
|
setup_tripwire(dev);
|
|
handle_setup_packet(dev, &dev->local_setup_buff);
|
|
}
|
|
|
|
/* USB transfer completion */
|
|
if (readl(&dev->op_regs->endptcomplete)) {
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"USB transfer completion interrupt\n");
|
|
handle_trans_complete(dev);
|
|
}
|
|
}
|
|
|
|
/* SOF received interrupt (for ISO transfer) */
|
|
if (irq_sts & STS_SRI) {
|
|
/* FIXME */
|
|
/* dev_vdbg(&dev->pdev->dev, "SOF received interrupt\n"); */
|
|
}
|
|
|
|
/* port change detect interrupt */
|
|
if (irq_sts & STS_PCI) {
|
|
dev_vdbg(&dev->pdev->dev, "port change detect interrupt\n");
|
|
handle_port_change(dev);
|
|
}
|
|
|
|
/* suspend interrupt */
|
|
if (irq_sts & STS_SLI) {
|
|
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
|
|
handle_bus_suspend(dev);
|
|
}
|
|
|
|
/* USB reset interrupt */
|
|
if (irq_sts & STS_URI) {
|
|
dev_vdbg(&dev->pdev->dev, "USB reset interrupt\n");
|
|
handle_usb_reset(dev);
|
|
}
|
|
|
|
/* USB error or system error interrupt */
|
|
if (irq_sts & (STS_UEI | STS_SEI)) {
|
|
/* FIXME */
|
|
dev_warn(&dev->pdev->dev, "error IRQ, irq_sts: %x\n", irq_sts);
|
|
}
|
|
|
|
spin_unlock(&dev->lock);
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* release device structure */
|
|
static void gadget_release(struct device *_dev)
|
|
{
|
|
struct langwell_udc *dev = dev_get_drvdata(_dev);
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
complete(dev->done);
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
kfree(dev);
|
|
}
|
|
|
|
|
|
/* enable SRAM caching if SRAM detected */
|
|
static void sram_init(struct langwell_udc *dev)
|
|
{
|
|
struct pci_dev *pdev = dev->pdev;
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
dev->sram_addr = pci_resource_start(pdev, 1);
|
|
dev->sram_size = pci_resource_len(pdev, 1);
|
|
dev_info(&dev->pdev->dev, "Found private SRAM at %x size:%x\n",
|
|
dev->sram_addr, dev->sram_size);
|
|
dev->got_sram = 1;
|
|
|
|
if (pci_request_region(pdev, 1, kobject_name(&pdev->dev.kobj))) {
|
|
dev_warn(&dev->pdev->dev, "SRAM request failed\n");
|
|
dev->got_sram = 0;
|
|
} else if (!dma_declare_coherent_memory(&pdev->dev, dev->sram_addr,
|
|
dev->sram_addr, dev->sram_size, DMA_MEMORY_MAP)) {
|
|
dev_warn(&dev->pdev->dev, "SRAM DMA declare failed\n");
|
|
pci_release_region(pdev, 1);
|
|
dev->got_sram = 0;
|
|
}
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* release SRAM caching */
|
|
static void sram_deinit(struct langwell_udc *dev)
|
|
{
|
|
struct pci_dev *pdev = dev->pdev;
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
dma_release_declared_memory(&pdev->dev);
|
|
pci_release_region(pdev, 1);
|
|
|
|
dev->got_sram = 0;
|
|
|
|
dev_info(&dev->pdev->dev, "release SRAM caching\n");
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
|
|
/* tear down the binding between this driver and the pci device */
|
|
static void langwell_udc_remove(struct pci_dev *pdev)
|
|
{
|
|
struct langwell_udc *dev = pci_get_drvdata(pdev);
|
|
|
|
DECLARE_COMPLETION(done);
|
|
|
|
BUG_ON(dev->driver);
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
dev->done = &done;
|
|
|
|
#ifndef OTG_TRANSCEIVER
|
|
/* free dTD dma_pool and dQH */
|
|
if (dev->dtd_pool)
|
|
dma_pool_destroy(dev->dtd_pool);
|
|
|
|
if (dev->ep_dqh)
|
|
dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
|
|
dev->ep_dqh, dev->ep_dqh_dma);
|
|
|
|
/* release SRAM caching */
|
|
if (dev->has_sram && dev->got_sram)
|
|
sram_deinit(dev);
|
|
#endif
|
|
|
|
if (dev->status_req) {
|
|
kfree(dev->status_req->req.buf);
|
|
kfree(dev->status_req);
|
|
}
|
|
|
|
kfree(dev->ep);
|
|
|
|
/* disable IRQ handler */
|
|
if (dev->got_irq)
|
|
free_irq(pdev->irq, dev);
|
|
|
|
#ifndef OTG_TRANSCEIVER
|
|
if (dev->cap_regs)
|
|
iounmap(dev->cap_regs);
|
|
|
|
if (dev->region)
|
|
release_mem_region(pci_resource_start(pdev, 0),
|
|
pci_resource_len(pdev, 0));
|
|
|
|
if (dev->enabled)
|
|
pci_disable_device(pdev);
|
|
#else
|
|
if (dev->transceiver) {
|
|
otg_put_transceiver(dev->transceiver);
|
|
dev->transceiver = NULL;
|
|
dev->lotg = NULL;
|
|
}
|
|
#endif
|
|
|
|
dev->cap_regs = NULL;
|
|
|
|
dev_info(&dev->pdev->dev, "unbind\n");
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
|
|
device_unregister(&dev->gadget.dev);
|
|
device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
|
|
device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
|
|
|
|
#ifndef OTG_TRANSCEIVER
|
|
pci_set_drvdata(pdev, NULL);
|
|
#endif
|
|
|
|
/* free dev, wait for the release() finished */
|
|
wait_for_completion(&done);
|
|
}
|
|
|
|
|
|
/*
|
|
* wrap this driver around the specified device, but
|
|
* don't respond over USB until a gadget driver binds to us.
|
|
*/
|
|
static int langwell_udc_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
struct langwell_udc *dev;
|
|
#ifndef OTG_TRANSCEIVER
|
|
unsigned long resource, len;
|
|
#endif
|
|
void __iomem *base = NULL;
|
|
size_t size;
|
|
int retval;
|
|
|
|
/* alloc, and start init */
|
|
dev = kzalloc(sizeof *dev, GFP_KERNEL);
|
|
if (dev == NULL) {
|
|
retval = -ENOMEM;
|
|
goto error;
|
|
}
|
|
|
|
/* initialize device spinlock */
|
|
spin_lock_init(&dev->lock);
|
|
|
|
dev->pdev = pdev;
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
#ifdef OTG_TRANSCEIVER
|
|
/* PCI device is already enabled by otg_transceiver driver */
|
|
dev->enabled = 1;
|
|
|
|
/* mem region and register base */
|
|
dev->region = 1;
|
|
dev->transceiver = otg_get_transceiver();
|
|
dev->lotg = otg_to_langwell(dev->transceiver);
|
|
base = dev->lotg->regs;
|
|
#else
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
/* now all the pci goodies ... */
|
|
if (pci_enable_device(pdev) < 0) {
|
|
retval = -ENODEV;
|
|
goto error;
|
|
}
|
|
dev->enabled = 1;
|
|
|
|
/* control register: BAR 0 */
|
|
resource = pci_resource_start(pdev, 0);
|
|
len = pci_resource_len(pdev, 0);
|
|
if (!request_mem_region(resource, len, driver_name)) {
|
|
dev_err(&dev->pdev->dev, "controller already in use\n");
|
|
retval = -EBUSY;
|
|
goto error;
|
|
}
|
|
dev->region = 1;
|
|
|
|
base = ioremap_nocache(resource, len);
|
|
#endif
|
|
if (base == NULL) {
|
|
dev_err(&dev->pdev->dev, "can't map memory\n");
|
|
retval = -EFAULT;
|
|
goto error;
|
|
}
|
|
|
|
dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
|
|
dev_vdbg(&dev->pdev->dev, "dev->cap_regs: %p\n", dev->cap_regs);
|
|
dev->op_regs = (struct langwell_op_regs __iomem *)
|
|
(base + OP_REG_OFFSET);
|
|
dev_vdbg(&dev->pdev->dev, "dev->op_regs: %p\n", dev->op_regs);
|
|
|
|
/* irq setup after old hardware is cleaned up */
|
|
if (!pdev->irq) {
|
|
dev_err(&dev->pdev->dev, "No IRQ. Check PCI setup!\n");
|
|
retval = -ENODEV;
|
|
goto error;
|
|
}
|
|
|
|
dev->has_sram = 1;
|
|
dev->got_sram = 0;
|
|
dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
|
|
|
|
#ifndef OTG_TRANSCEIVER
|
|
/* enable SRAM caching if detected */
|
|
if (dev->has_sram && !dev->got_sram)
|
|
sram_init(dev);
|
|
|
|
dev_info(&dev->pdev->dev,
|
|
"irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
|
|
pdev->irq, resource, len, base);
|
|
/* enables bus-mastering for device dev */
|
|
pci_set_master(pdev);
|
|
|
|
if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
|
|
driver_name, dev) != 0) {
|
|
dev_err(&dev->pdev->dev,
|
|
"request interrupt %d failed\n", pdev->irq);
|
|
retval = -EBUSY;
|
|
goto error;
|
|
}
|
|
dev->got_irq = 1;
|
|
#endif
|
|
|
|
/* set stopped bit */
|
|
dev->stopped = 1;
|
|
|
|
/* capabilities and endpoint number */
|
|
dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
|
|
dev->dciversion = readw(&dev->cap_regs->dciversion);
|
|
dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
|
|
dev_vdbg(&dev->pdev->dev, "dev->lpm: %d\n", dev->lpm);
|
|
dev_vdbg(&dev->pdev->dev, "dev->dciversion: 0x%04x\n",
|
|
dev->dciversion);
|
|
dev_vdbg(&dev->pdev->dev, "dccparams: 0x%08x\n",
|
|
readl(&dev->cap_regs->dccparams));
|
|
dev_vdbg(&dev->pdev->dev, "dev->devcap: %d\n", dev->devcap);
|
|
if (!dev->devcap) {
|
|
dev_err(&dev->pdev->dev, "can't support device mode\n");
|
|
retval = -ENODEV;
|
|
goto error;
|
|
}
|
|
|
|
/* a pair of endpoints (out/in) for each address */
|
|
dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
|
|
dev_vdbg(&dev->pdev->dev, "dev->ep_max: %d\n", dev->ep_max);
|
|
|
|
/* allocate endpoints memory */
|
|
dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
|
|
GFP_KERNEL);
|
|
if (!dev->ep) {
|
|
dev_err(&dev->pdev->dev, "allocate endpoints memory failed\n");
|
|
retval = -ENOMEM;
|
|
goto error;
|
|
}
|
|
|
|
/* allocate device dQH memory */
|
|
size = dev->ep_max * sizeof(struct langwell_dqh);
|
|
dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
|
|
if (size < DQH_ALIGNMENT)
|
|
size = DQH_ALIGNMENT;
|
|
else if ((size % DQH_ALIGNMENT) != 0) {
|
|
size += DQH_ALIGNMENT + 1;
|
|
size &= ~(DQH_ALIGNMENT - 1);
|
|
}
|
|
dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
|
|
&dev->ep_dqh_dma, GFP_KERNEL);
|
|
if (!dev->ep_dqh) {
|
|
dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
|
|
retval = -ENOMEM;
|
|
goto error;
|
|
}
|
|
dev->ep_dqh_size = size;
|
|
dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
|
|
|
|
/* initialize ep0 status request structure */
|
|
dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
|
|
if (!dev->status_req) {
|
|
dev_err(&dev->pdev->dev,
|
|
"allocate status_req memory failed\n");
|
|
retval = -ENOMEM;
|
|
goto error;
|
|
}
|
|
INIT_LIST_HEAD(&dev->status_req->queue);
|
|
|
|
/* allocate a small amount of memory to get valid address */
|
|
dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
|
|
dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
|
|
|
|
dev->resume_state = USB_STATE_NOTATTACHED;
|
|
dev->usb_state = USB_STATE_POWERED;
|
|
dev->ep0_dir = USB_DIR_OUT;
|
|
|
|
/* remote wakeup reset to 0 when the device is reset */
|
|
dev->remote_wakeup = 0;
|
|
dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
|
|
|
|
#ifndef OTG_TRANSCEIVER
|
|
/* reset device controller */
|
|
langwell_udc_reset(dev);
|
|
#endif
|
|
|
|
/* initialize gadget structure */
|
|
dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
|
|
dev->gadget.ep0 = &dev->ep[0].ep; /* gadget ep0 */
|
|
INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
|
|
dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
|
|
dev->gadget.is_dualspeed = 1; /* support dual speed */
|
|
#ifdef OTG_TRANSCEIVER
|
|
dev->gadget.is_otg = 1; /* support otg mode */
|
|
#endif
|
|
|
|
/* the "gadget" abstracts/virtualizes the controller */
|
|
dev_set_name(&dev->gadget.dev, "gadget");
|
|
dev->gadget.dev.parent = &pdev->dev;
|
|
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
|
|
dev->gadget.dev.release = gadget_release;
|
|
dev->gadget.name = driver_name; /* gadget name */
|
|
|
|
/* controller endpoints reinit */
|
|
eps_reinit(dev);
|
|
|
|
#ifndef OTG_TRANSCEIVER
|
|
/* reset ep0 dQH and endptctrl */
|
|
ep0_reset(dev);
|
|
#endif
|
|
|
|
/* create dTD dma_pool resource */
|
|
dev->dtd_pool = dma_pool_create("langwell_dtd",
|
|
&dev->pdev->dev,
|
|
sizeof(struct langwell_dtd),
|
|
DTD_ALIGNMENT,
|
|
DMA_BOUNDARY);
|
|
|
|
if (!dev->dtd_pool) {
|
|
retval = -ENOMEM;
|
|
goto error;
|
|
}
|
|
|
|
/* done */
|
|
dev_info(&dev->pdev->dev, "%s\n", driver_desc);
|
|
dev_info(&dev->pdev->dev, "irq %d, pci mem %p\n", pdev->irq, base);
|
|
dev_info(&dev->pdev->dev, "Driver version: " DRIVER_VERSION "\n");
|
|
dev_info(&dev->pdev->dev, "Support (max) %d endpoints\n", dev->ep_max);
|
|
dev_info(&dev->pdev->dev, "Device interface version: 0x%04x\n",
|
|
dev->dciversion);
|
|
dev_info(&dev->pdev->dev, "Controller mode: %s\n",
|
|
dev->devcap ? "Device" : "Host");
|
|
dev_info(&dev->pdev->dev, "Support USB LPM: %s\n",
|
|
dev->lpm ? "Yes" : "No");
|
|
|
|
dev_vdbg(&dev->pdev->dev,
|
|
"After langwell_udc_probe(), print all registers:\n");
|
|
print_all_registers(dev);
|
|
|
|
retval = device_register(&dev->gadget.dev);
|
|
if (retval)
|
|
goto error;
|
|
|
|
retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
|
|
if (retval)
|
|
goto error;
|
|
|
|
retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
|
|
if (retval)
|
|
goto error;
|
|
|
|
retval = device_create_file(&pdev->dev, &dev_attr_remote_wakeup);
|
|
if (retval)
|
|
goto error_attr1;
|
|
|
|
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
|
|
error_attr1:
|
|
device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
|
|
error:
|
|
if (dev) {
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
langwell_udc_remove(pdev);
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* device controller suspend */
|
|
static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct langwell_udc *dev = pci_get_drvdata(pdev);
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
usb_del_gadget_udc(&dev->gadget);
|
|
/* disable interrupt and set controller to stop state */
|
|
langwell_udc_stop(dev);
|
|
|
|
/* disable IRQ handler */
|
|
if (dev->got_irq)
|
|
free_irq(pdev->irq, dev);
|
|
dev->got_irq = 0;
|
|
|
|
/* save PCI state */
|
|
pci_save_state(pdev);
|
|
|
|
spin_lock_irq(&dev->lock);
|
|
/* stop all usb activities */
|
|
stop_activity(dev, dev->driver);
|
|
spin_unlock_irq(&dev->lock);
|
|
|
|
/* free dTD dma_pool and dQH */
|
|
if (dev->dtd_pool)
|
|
dma_pool_destroy(dev->dtd_pool);
|
|
|
|
if (dev->ep_dqh)
|
|
dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
|
|
dev->ep_dqh, dev->ep_dqh_dma);
|
|
|
|
/* release SRAM caching */
|
|
if (dev->has_sram && dev->got_sram)
|
|
sram_deinit(dev);
|
|
|
|
/* set device power state */
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
/* enter PHY low power suspend */
|
|
if (dev->pdev->device != 0x0829)
|
|
langwell_phy_low_power(dev, 1);
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* device controller resume */
|
|
static int langwell_udc_resume(struct pci_dev *pdev)
|
|
{
|
|
struct langwell_udc *dev = pci_get_drvdata(pdev);
|
|
size_t size;
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* exit PHY low power suspend */
|
|
if (dev->pdev->device != 0x0829)
|
|
langwell_phy_low_power(dev, 0);
|
|
|
|
/* set device D0 power state */
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
|
|
/* enable SRAM caching if detected */
|
|
if (dev->has_sram && !dev->got_sram)
|
|
sram_init(dev);
|
|
|
|
/* allocate device dQH memory */
|
|
size = dev->ep_max * sizeof(struct langwell_dqh);
|
|
dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
|
|
if (size < DQH_ALIGNMENT)
|
|
size = DQH_ALIGNMENT;
|
|
else if ((size % DQH_ALIGNMENT) != 0) {
|
|
size += DQH_ALIGNMENT + 1;
|
|
size &= ~(DQH_ALIGNMENT - 1);
|
|
}
|
|
dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
|
|
&dev->ep_dqh_dma, GFP_KERNEL);
|
|
if (!dev->ep_dqh) {
|
|
dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
dev->ep_dqh_size = size;
|
|
dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
|
|
|
|
/* create dTD dma_pool resource */
|
|
dev->dtd_pool = dma_pool_create("langwell_dtd",
|
|
&dev->pdev->dev,
|
|
sizeof(struct langwell_dtd),
|
|
DTD_ALIGNMENT,
|
|
DMA_BOUNDARY);
|
|
|
|
if (!dev->dtd_pool)
|
|
return -ENOMEM;
|
|
|
|
/* restore PCI state */
|
|
pci_restore_state(pdev);
|
|
|
|
/* enable IRQ handler */
|
|
if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
|
|
driver_name, dev) != 0) {
|
|
dev_err(&dev->pdev->dev, "request interrupt %d failed\n",
|
|
pdev->irq);
|
|
return -EBUSY;
|
|
}
|
|
dev->got_irq = 1;
|
|
|
|
/* reset and start controller to run state */
|
|
if (dev->stopped) {
|
|
/* reset device controller */
|
|
langwell_udc_reset(dev);
|
|
|
|
/* reset ep0 dQH and endptctrl */
|
|
ep0_reset(dev);
|
|
|
|
/* start device if gadget is loaded */
|
|
if (dev->driver)
|
|
langwell_udc_start(dev);
|
|
}
|
|
|
|
/* reset USB status */
|
|
dev->usb_state = USB_STATE_ATTACHED;
|
|
dev->ep0_state = WAIT_FOR_SETUP;
|
|
dev->ep0_dir = USB_DIR_OUT;
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* pci driver shutdown */
|
|
static void langwell_udc_shutdown(struct pci_dev *pdev)
|
|
{
|
|
struct langwell_udc *dev = pci_get_drvdata(pdev);
|
|
u32 usbmode;
|
|
|
|
dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
|
|
|
|
/* reset controller mode to IDLE */
|
|
usbmode = readl(&dev->op_regs->usbmode);
|
|
dev_dbg(&dev->pdev->dev, "usbmode = 0x%08x\n", usbmode);
|
|
usbmode &= (~3 | MODE_IDLE);
|
|
writel(usbmode, &dev->op_regs->usbmode);
|
|
|
|
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static const struct pci_device_id pci_ids[] = { {
|
|
.class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
|
|
.class_mask = ~0,
|
|
.vendor = 0x8086,
|
|
.device = 0x0811,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
}, { /* end: all zeroes */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, pci_ids);
|
|
|
|
|
|
static struct pci_driver langwell_pci_driver = {
|
|
.name = (char *) driver_name,
|
|
.id_table = pci_ids,
|
|
|
|
.probe = langwell_udc_probe,
|
|
.remove = langwell_udc_remove,
|
|
|
|
/* device controller suspend/resume */
|
|
.suspend = langwell_udc_suspend,
|
|
.resume = langwell_udc_resume,
|
|
|
|
.shutdown = langwell_udc_shutdown,
|
|
};
|
|
|
|
|
|
static int __init init(void)
|
|
{
|
|
#ifdef OTG_TRANSCEIVER
|
|
return langwell_register_peripheral(&langwell_pci_driver);
|
|
#else
|
|
return pci_register_driver(&langwell_pci_driver);
|
|
#endif
|
|
}
|
|
module_init(init);
|
|
|
|
|
|
static void __exit cleanup(void)
|
|
{
|
|
#ifdef OTG_TRANSCEIVER
|
|
return langwell_unregister_peripheral(&langwell_pci_driver);
|
|
#else
|
|
pci_unregister_driver(&langwell_pci_driver);
|
|
#endif
|
|
}
|
|
module_exit(cleanup);
|
|
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
|
|
MODULE_VERSION(DRIVER_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
|