mirror of https://gitee.com/openkylin/linux.git
1399 lines
36 KiB
C
1399 lines
36 KiB
C
/* linux/drivers/usb/gadget/s3c-hsudc.c
|
|
*
|
|
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com/
|
|
*
|
|
* S3C24XX USB 2.0 High-speed USB controller gadget driver
|
|
*
|
|
* The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
|
|
* Each endpoint can be configured as either in or out endpoint. Endpoints
|
|
* can be configured for Bulk or Interrupt transfer mode.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/prefetch.h>
|
|
|
|
#include <mach/regs-s3c2443-clock.h>
|
|
#include <plat/udc.h>
|
|
|
|
#define S3C_HSUDC_REG(x) (x)
|
|
|
|
/* Non-Indexed Registers */
|
|
#define S3C_IR S3C_HSUDC_REG(0x00) /* Index Register */
|
|
#define S3C_EIR S3C_HSUDC_REG(0x04) /* EP Intr Status */
|
|
#define S3C_EIR_EP0 (1<<0)
|
|
#define S3C_EIER S3C_HSUDC_REG(0x08) /* EP Intr Enable */
|
|
#define S3C_FAR S3C_HSUDC_REG(0x0c) /* Gadget Address */
|
|
#define S3C_FNR S3C_HSUDC_REG(0x10) /* Frame Number */
|
|
#define S3C_EDR S3C_HSUDC_REG(0x14) /* EP Direction */
|
|
#define S3C_TR S3C_HSUDC_REG(0x18) /* Test Register */
|
|
#define S3C_SSR S3C_HSUDC_REG(0x1c) /* System Status */
|
|
#define S3C_SSR_DTZIEN_EN (0xff8f)
|
|
#define S3C_SSR_ERR (0xff80)
|
|
#define S3C_SSR_VBUSON (1 << 8)
|
|
#define S3C_SSR_HSP (1 << 4)
|
|
#define S3C_SSR_SDE (1 << 3)
|
|
#define S3C_SSR_RESUME (1 << 2)
|
|
#define S3C_SSR_SUSPEND (1 << 1)
|
|
#define S3C_SSR_RESET (1 << 0)
|
|
#define S3C_SCR S3C_HSUDC_REG(0x20) /* System Control */
|
|
#define S3C_SCR_DTZIEN_EN (1 << 14)
|
|
#define S3C_SCR_RRD_EN (1 << 5)
|
|
#define S3C_SCR_SUS_EN (1 << 1)
|
|
#define S3C_SCR_RST_EN (1 << 0)
|
|
#define S3C_EP0SR S3C_HSUDC_REG(0x24) /* EP0 Status */
|
|
#define S3C_EP0SR_EP0_LWO (1 << 6)
|
|
#define S3C_EP0SR_STALL (1 << 4)
|
|
#define S3C_EP0SR_TX_SUCCESS (1 << 1)
|
|
#define S3C_EP0SR_RX_SUCCESS (1 << 0)
|
|
#define S3C_EP0CR S3C_HSUDC_REG(0x28) /* EP0 Control */
|
|
#define S3C_BR(_x) S3C_HSUDC_REG(0x60 + (_x * 4))
|
|
|
|
/* Indexed Registers */
|
|
#define S3C_ESR S3C_HSUDC_REG(0x2c) /* EPn Status */
|
|
#define S3C_ESR_FLUSH (1 << 6)
|
|
#define S3C_ESR_STALL (1 << 5)
|
|
#define S3C_ESR_LWO (1 << 4)
|
|
#define S3C_ESR_PSIF_ONE (1 << 2)
|
|
#define S3C_ESR_PSIF_TWO (2 << 2)
|
|
#define S3C_ESR_TX_SUCCESS (1 << 1)
|
|
#define S3C_ESR_RX_SUCCESS (1 << 0)
|
|
#define S3C_ECR S3C_HSUDC_REG(0x30) /* EPn Control */
|
|
#define S3C_ECR_DUEN (1 << 7)
|
|
#define S3C_ECR_FLUSH (1 << 6)
|
|
#define S3C_ECR_STALL (1 << 1)
|
|
#define S3C_ECR_IEMS (1 << 0)
|
|
#define S3C_BRCR S3C_HSUDC_REG(0x34) /* Read Count */
|
|
#define S3C_BWCR S3C_HSUDC_REG(0x38) /* Write Count */
|
|
#define S3C_MPR S3C_HSUDC_REG(0x3c) /* Max Pkt Size */
|
|
|
|
#define WAIT_FOR_SETUP (0)
|
|
#define DATA_STATE_XMIT (1)
|
|
#define DATA_STATE_RECV (2)
|
|
|
|
/**
|
|
* struct s3c_hsudc_ep - Endpoint representation used by driver.
|
|
* @ep: USB gadget layer representation of device endpoint.
|
|
* @name: Endpoint name (as required by ep autoconfiguration).
|
|
* @dev: Reference to the device controller to which this EP belongs.
|
|
* @desc: Endpoint descriptor obtained from the gadget driver.
|
|
* @queue: Transfer request queue for the endpoint.
|
|
* @stopped: Maintains state of endpoint, set if EP is halted.
|
|
* @bEndpointAddress: EP address (including direction bit).
|
|
* @fifo: Base address of EP FIFO.
|
|
*/
|
|
struct s3c_hsudc_ep {
|
|
struct usb_ep ep;
|
|
char name[20];
|
|
struct s3c_hsudc *dev;
|
|
const struct usb_endpoint_descriptor *desc;
|
|
struct list_head queue;
|
|
u8 stopped;
|
|
u8 wedge;
|
|
u8 bEndpointAddress;
|
|
void __iomem *fifo;
|
|
};
|
|
|
|
/**
|
|
* struct s3c_hsudc_req - Driver encapsulation of USB gadget transfer request.
|
|
* @req: Reference to USB gadget transfer request.
|
|
* @queue: Used for inserting this request to the endpoint request queue.
|
|
*/
|
|
struct s3c_hsudc_req {
|
|
struct usb_request req;
|
|
struct list_head queue;
|
|
};
|
|
|
|
/**
|
|
* struct s3c_hsudc - Driver's abstraction of the device controller.
|
|
* @gadget: Instance of usb_gadget which is referenced by gadget driver.
|
|
* @driver: Reference to currenty active gadget driver.
|
|
* @dev: The device reference used by probe function.
|
|
* @lock: Lock to synchronize the usage of Endpoints (EP's are indexed).
|
|
* @regs: Remapped base address of controller's register space.
|
|
* @mem_rsrc: Device memory resource used for remapping device register space.
|
|
* irq: IRQ number used by the controller.
|
|
* uclk: Reference to the controller clock.
|
|
* ep0state: Current state of EP0.
|
|
* ep: List of endpoints supported by the controller.
|
|
*/
|
|
struct s3c_hsudc {
|
|
struct usb_gadget gadget;
|
|
struct usb_gadget_driver *driver;
|
|
struct device *dev;
|
|
struct s3c24xx_hsudc_platdata *pd;
|
|
struct otg_transceiver *transceiver;
|
|
spinlock_t lock;
|
|
void __iomem *regs;
|
|
struct resource *mem_rsrc;
|
|
int irq;
|
|
struct clk *uclk;
|
|
int ep0state;
|
|
struct s3c_hsudc_ep ep[];
|
|
};
|
|
|
|
#define ep_maxpacket(_ep) ((_ep)->ep.maxpacket)
|
|
#define ep_is_in(_ep) ((_ep)->bEndpointAddress & USB_DIR_IN)
|
|
#define ep_index(_ep) ((_ep)->bEndpointAddress & \
|
|
USB_ENDPOINT_NUMBER_MASK)
|
|
|
|
static struct s3c_hsudc *the_controller;
|
|
static const char driver_name[] = "s3c-udc";
|
|
static const char ep0name[] = "ep0-control";
|
|
|
|
static inline struct s3c_hsudc_req *our_req(struct usb_request *req)
|
|
{
|
|
return container_of(req, struct s3c_hsudc_req, req);
|
|
}
|
|
|
|
static inline struct s3c_hsudc_ep *our_ep(struct usb_ep *ep)
|
|
{
|
|
return container_of(ep, struct s3c_hsudc_ep, ep);
|
|
}
|
|
|
|
static inline struct s3c_hsudc *to_hsudc(struct usb_gadget *gadget)
|
|
{
|
|
return container_of(gadget, struct s3c_hsudc, gadget);
|
|
}
|
|
|
|
static inline void set_index(struct s3c_hsudc *hsudc, int ep_addr)
|
|
{
|
|
ep_addr &= USB_ENDPOINT_NUMBER_MASK;
|
|
writel(ep_addr, hsudc->regs + S3C_IR);
|
|
}
|
|
|
|
static inline void __orr32(void __iomem *ptr, u32 val)
|
|
{
|
|
writel(readl(ptr) | val, ptr);
|
|
}
|
|
|
|
static void s3c_hsudc_init_phy(void)
|
|
{
|
|
u32 cfg;
|
|
|
|
cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
|
|
writel(cfg, S3C2443_PWRCFG);
|
|
|
|
cfg = readl(S3C2443_URSTCON);
|
|
cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
|
|
writel(cfg, S3C2443_URSTCON);
|
|
mdelay(1);
|
|
|
|
cfg = readl(S3C2443_URSTCON);
|
|
cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
|
|
writel(cfg, S3C2443_URSTCON);
|
|
|
|
cfg = readl(S3C2443_PHYCTRL);
|
|
cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
|
|
cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
|
|
writel(cfg, S3C2443_PHYCTRL);
|
|
|
|
cfg = readl(S3C2443_PHYPWR);
|
|
cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
|
|
S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
|
|
S3C2443_PHYPWR_ANALOG_PD);
|
|
cfg |= S3C2443_PHYPWR_COMMON_ON;
|
|
writel(cfg, S3C2443_PHYPWR);
|
|
|
|
cfg = readl(S3C2443_UCLKCON);
|
|
cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
|
|
S3C2443_UCLKCON_TCLKEN);
|
|
writel(cfg, S3C2443_UCLKCON);
|
|
}
|
|
|
|
static void s3c_hsudc_uninit_phy(void)
|
|
{
|
|
u32 cfg;
|
|
|
|
cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
|
|
writel(cfg, S3C2443_PWRCFG);
|
|
|
|
writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
|
|
|
|
cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
|
|
writel(cfg, S3C2443_UCLKCON);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_complete_request - Complete a transfer request.
|
|
* @hsep: Endpoint to which the request belongs.
|
|
* @hsreq: Transfer request to be completed.
|
|
* @status: Transfer completion status for the transfer request.
|
|
*/
|
|
static void s3c_hsudc_complete_request(struct s3c_hsudc_ep *hsep,
|
|
struct s3c_hsudc_req *hsreq, int status)
|
|
{
|
|
unsigned int stopped = hsep->stopped;
|
|
struct s3c_hsudc *hsudc = hsep->dev;
|
|
|
|
list_del_init(&hsreq->queue);
|
|
hsreq->req.status = status;
|
|
|
|
if (!ep_index(hsep)) {
|
|
hsudc->ep0state = WAIT_FOR_SETUP;
|
|
hsep->bEndpointAddress &= ~USB_DIR_IN;
|
|
}
|
|
|
|
hsep->stopped = 1;
|
|
spin_unlock(&hsudc->lock);
|
|
if (hsreq->req.complete != NULL)
|
|
hsreq->req.complete(&hsep->ep, &hsreq->req);
|
|
spin_lock(&hsudc->lock);
|
|
hsep->stopped = stopped;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_nuke_ep - Terminate all requests queued for a endpoint.
|
|
* @hsep: Endpoint for which queued requests have to be terminated.
|
|
* @status: Transfer completion status for the transfer request.
|
|
*/
|
|
static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)
|
|
{
|
|
struct s3c_hsudc_req *hsreq;
|
|
|
|
while (!list_empty(&hsep->queue)) {
|
|
hsreq = list_entry(hsep->queue.next,
|
|
struct s3c_hsudc_req, queue);
|
|
s3c_hsudc_complete_request(hsep, hsreq, status);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_stop_activity - Stop activity on all endpoints.
|
|
* @hsudc: Device controller for which EP activity is to be stopped.
|
|
* @driver: Reference to the gadget driver which is currently active.
|
|
*
|
|
* All the endpoints are stopped and any pending transfer requests if any on
|
|
* the endpoint are terminated.
|
|
*/
|
|
static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc,
|
|
struct usb_gadget_driver *driver)
|
|
{
|
|
struct s3c_hsudc_ep *hsep;
|
|
int epnum;
|
|
|
|
hsudc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
|
|
for (epnum = 0; epnum < hsudc->pd->epnum; epnum++) {
|
|
hsep = &hsudc->ep[epnum];
|
|
hsep->stopped = 1;
|
|
s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
|
|
}
|
|
|
|
spin_unlock(&hsudc->lock);
|
|
driver->disconnect(&hsudc->gadget);
|
|
spin_lock(&hsudc->lock);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_read_setup_pkt - Read the received setup packet from EP0 fifo.
|
|
* @hsudc: Device controller from which setup packet is to be read.
|
|
* @buf: The buffer into which the setup packet is read.
|
|
*
|
|
* The setup packet received in the EP0 fifo is read and stored into a
|
|
* given buffer address.
|
|
*/
|
|
|
|
static void s3c_hsudc_read_setup_pkt(struct s3c_hsudc *hsudc, u16 *buf)
|
|
{
|
|
int count;
|
|
|
|
count = readl(hsudc->regs + S3C_BRCR);
|
|
while (count--)
|
|
*buf++ = (u16)readl(hsudc->regs + S3C_BR(0));
|
|
|
|
writel(S3C_EP0SR_RX_SUCCESS, hsudc->regs + S3C_EP0SR);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_write_fifo - Write next chunk of transfer data to EP fifo.
|
|
* @hsep: Endpoint to which the data is to be written.
|
|
* @hsreq: Transfer request from which the next chunk of data is written.
|
|
*
|
|
* Write the next chunk of data from a transfer request to the endpoint FIFO.
|
|
* If the transfer request completes, 1 is returned, otherwise 0 is returned.
|
|
*/
|
|
static int s3c_hsudc_write_fifo(struct s3c_hsudc_ep *hsep,
|
|
struct s3c_hsudc_req *hsreq)
|
|
{
|
|
u16 *buf;
|
|
u32 max = ep_maxpacket(hsep);
|
|
u32 count, length;
|
|
bool is_last;
|
|
void __iomem *fifo = hsep->fifo;
|
|
|
|
buf = hsreq->req.buf + hsreq->req.actual;
|
|
prefetch(buf);
|
|
|
|
length = hsreq->req.length - hsreq->req.actual;
|
|
length = min(length, max);
|
|
hsreq->req.actual += length;
|
|
|
|
writel(length, hsep->dev->regs + S3C_BWCR);
|
|
for (count = 0; count < length; count += 2)
|
|
writel(*buf++, fifo);
|
|
|
|
if (count != max) {
|
|
is_last = true;
|
|
} else {
|
|
if (hsreq->req.length != hsreq->req.actual || hsreq->req.zero)
|
|
is_last = false;
|
|
else
|
|
is_last = true;
|
|
}
|
|
|
|
if (is_last) {
|
|
s3c_hsudc_complete_request(hsep, hsreq, 0);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_read_fifo - Read the next chunk of data from EP fifo.
|
|
* @hsep: Endpoint from which the data is to be read.
|
|
* @hsreq: Transfer request to which the next chunk of data read is written.
|
|
*
|
|
* Read the next chunk of data from the endpoint FIFO and a write it to the
|
|
* transfer request buffer. If the transfer request completes, 1 is returned,
|
|
* otherwise 0 is returned.
|
|
*/
|
|
static int s3c_hsudc_read_fifo(struct s3c_hsudc_ep *hsep,
|
|
struct s3c_hsudc_req *hsreq)
|
|
{
|
|
struct s3c_hsudc *hsudc = hsep->dev;
|
|
u32 csr, offset;
|
|
u16 *buf, word;
|
|
u32 buflen, rcnt, rlen;
|
|
void __iomem *fifo = hsep->fifo;
|
|
u32 is_short = 0;
|
|
|
|
offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR;
|
|
csr = readl(hsudc->regs + offset);
|
|
if (!(csr & S3C_ESR_RX_SUCCESS))
|
|
return -EINVAL;
|
|
|
|
buf = hsreq->req.buf + hsreq->req.actual;
|
|
prefetchw(buf);
|
|
buflen = hsreq->req.length - hsreq->req.actual;
|
|
|
|
rcnt = readl(hsudc->regs + S3C_BRCR);
|
|
rlen = (csr & S3C_ESR_LWO) ? (rcnt * 2 - 1) : (rcnt * 2);
|
|
|
|
hsreq->req.actual += min(rlen, buflen);
|
|
is_short = (rlen < hsep->ep.maxpacket);
|
|
|
|
while (rcnt-- != 0) {
|
|
word = (u16)readl(fifo);
|
|
if (buflen) {
|
|
*buf++ = word;
|
|
buflen--;
|
|
} else {
|
|
hsreq->req.status = -EOVERFLOW;
|
|
}
|
|
}
|
|
|
|
writel(S3C_ESR_RX_SUCCESS, hsudc->regs + offset);
|
|
|
|
if (is_short || hsreq->req.actual == hsreq->req.length) {
|
|
s3c_hsudc_complete_request(hsep, hsreq, 0);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_epin_intr - Handle in-endpoint interrupt.
|
|
* @hsudc - Device controller for which the interrupt is to be handled.
|
|
* @ep_idx - Endpoint number on which an interrupt is pending.
|
|
*
|
|
* Handles interrupt for a in-endpoint. The interrupts that are handled are
|
|
* stall and data transmit complete interrupt.
|
|
*/
|
|
static void s3c_hsudc_epin_intr(struct s3c_hsudc *hsudc, u32 ep_idx)
|
|
{
|
|
struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx];
|
|
struct s3c_hsudc_req *hsreq;
|
|
u32 csr;
|
|
|
|
csr = readl((u32)hsudc->regs + S3C_ESR);
|
|
if (csr & S3C_ESR_STALL) {
|
|
writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR);
|
|
return;
|
|
}
|
|
|
|
if (csr & S3C_ESR_TX_SUCCESS) {
|
|
writel(S3C_ESR_TX_SUCCESS, hsudc->regs + S3C_ESR);
|
|
if (list_empty(&hsep->queue))
|
|
return;
|
|
|
|
hsreq = list_entry(hsep->queue.next,
|
|
struct s3c_hsudc_req, queue);
|
|
if ((s3c_hsudc_write_fifo(hsep, hsreq) == 0) &&
|
|
(csr & S3C_ESR_PSIF_TWO))
|
|
s3c_hsudc_write_fifo(hsep, hsreq);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_epout_intr - Handle out-endpoint interrupt.
|
|
* @hsudc - Device controller for which the interrupt is to be handled.
|
|
* @ep_idx - Endpoint number on which an interrupt is pending.
|
|
*
|
|
* Handles interrupt for a out-endpoint. The interrupts that are handled are
|
|
* stall, flush and data ready interrupt.
|
|
*/
|
|
static void s3c_hsudc_epout_intr(struct s3c_hsudc *hsudc, u32 ep_idx)
|
|
{
|
|
struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx];
|
|
struct s3c_hsudc_req *hsreq;
|
|
u32 csr;
|
|
|
|
csr = readl((u32)hsudc->regs + S3C_ESR);
|
|
if (csr & S3C_ESR_STALL) {
|
|
writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR);
|
|
return;
|
|
}
|
|
|
|
if (csr & S3C_ESR_FLUSH) {
|
|
__orr32(hsudc->regs + S3C_ECR, S3C_ECR_FLUSH);
|
|
return;
|
|
}
|
|
|
|
if (csr & S3C_ESR_RX_SUCCESS) {
|
|
if (list_empty(&hsep->queue))
|
|
return;
|
|
|
|
hsreq = list_entry(hsep->queue.next,
|
|
struct s3c_hsudc_req, queue);
|
|
if (((s3c_hsudc_read_fifo(hsep, hsreq)) == 0) &&
|
|
(csr & S3C_ESR_PSIF_TWO))
|
|
s3c_hsudc_read_fifo(hsep, hsreq);
|
|
}
|
|
}
|
|
|
|
/** s3c_hsudc_set_halt - Set or clear a endpoint halt.
|
|
* @_ep: Endpoint on which halt has to be set or cleared.
|
|
* @value: 1 for setting halt on endpoint, 0 to clear halt.
|
|
*
|
|
* Set or clear endpoint halt. If halt is set, the endpoint is stopped.
|
|
* If halt is cleared, for in-endpoints, if there are any pending
|
|
* transfer requests, transfers are started.
|
|
*/
|
|
static int s3c_hsudc_set_halt(struct usb_ep *_ep, int value)
|
|
{
|
|
struct s3c_hsudc_ep *hsep = our_ep(_ep);
|
|
struct s3c_hsudc *hsudc = hsep->dev;
|
|
struct s3c_hsudc_req *hsreq;
|
|
unsigned long irqflags;
|
|
u32 ecr;
|
|
u32 offset;
|
|
|
|
if (value && ep_is_in(hsep) && !list_empty(&hsep->queue))
|
|
return -EAGAIN;
|
|
|
|
spin_lock_irqsave(&hsudc->lock, irqflags);
|
|
set_index(hsudc, ep_index(hsep));
|
|
offset = (ep_index(hsep)) ? S3C_ECR : S3C_EP0CR;
|
|
ecr = readl(hsudc->regs + offset);
|
|
|
|
if (value) {
|
|
ecr |= S3C_ECR_STALL;
|
|
if (ep_index(hsep))
|
|
ecr |= S3C_ECR_FLUSH;
|
|
hsep->stopped = 1;
|
|
} else {
|
|
ecr &= ~S3C_ECR_STALL;
|
|
hsep->stopped = hsep->wedge = 0;
|
|
}
|
|
writel(ecr, hsudc->regs + offset);
|
|
|
|
if (ep_is_in(hsep) && !list_empty(&hsep->queue) && !value) {
|
|
hsreq = list_entry(hsep->queue.next,
|
|
struct s3c_hsudc_req, queue);
|
|
if (hsreq)
|
|
s3c_hsudc_write_fifo(hsep, hsreq);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hsudc->lock, irqflags);
|
|
return 0;
|
|
}
|
|
|
|
/** s3c_hsudc_set_wedge - Sets the halt feature with the clear requests ignored
|
|
* @_ep: Endpoint on which wedge has to be set.
|
|
*
|
|
* Sets the halt feature with the clear requests ignored.
|
|
*/
|
|
static int s3c_hsudc_set_wedge(struct usb_ep *_ep)
|
|
{
|
|
struct s3c_hsudc_ep *hsep = our_ep(_ep);
|
|
|
|
if (!hsep)
|
|
return -EINVAL;
|
|
|
|
hsep->wedge = 1;
|
|
return usb_ep_set_halt(_ep);
|
|
}
|
|
|
|
/** s3c_hsudc_handle_reqfeat - Handle set feature or clear feature requests.
|
|
* @_ep: Device controller on which the set/clear feature needs to be handled.
|
|
* @ctrl: Control request as received on the endpoint 0.
|
|
*
|
|
* Handle set feature or clear feature control requests on the control endpoint.
|
|
*/
|
|
static int s3c_hsudc_handle_reqfeat(struct s3c_hsudc *hsudc,
|
|
struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct s3c_hsudc_ep *hsep;
|
|
bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
|
|
u8 ep_num = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK;
|
|
|
|
if (ctrl->bRequestType == USB_RECIP_ENDPOINT) {
|
|
hsep = &hsudc->ep[ep_num];
|
|
switch (le16_to_cpu(ctrl->wValue)) {
|
|
case USB_ENDPOINT_HALT:
|
|
if (set || (!set && !hsep->wedge))
|
|
s3c_hsudc_set_halt(&hsep->ep, set);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_process_req_status - Handle get status control request.
|
|
* @hsudc: Device controller on which get status request has be handled.
|
|
* @ctrl: Control request as received on the endpoint 0.
|
|
*
|
|
* Handle get status control request received on control endpoint.
|
|
*/
|
|
static void s3c_hsudc_process_req_status(struct s3c_hsudc *hsudc,
|
|
struct usb_ctrlrequest *ctrl)
|
|
{
|
|
struct s3c_hsudc_ep *hsep0 = &hsudc->ep[0];
|
|
struct s3c_hsudc_req hsreq;
|
|
struct s3c_hsudc_ep *hsep;
|
|
__le16 reply;
|
|
u8 epnum;
|
|
|
|
switch (ctrl->bRequestType & USB_RECIP_MASK) {
|
|
case USB_RECIP_DEVICE:
|
|
reply = cpu_to_le16(0);
|
|
break;
|
|
|
|
case USB_RECIP_INTERFACE:
|
|
reply = cpu_to_le16(0);
|
|
break;
|
|
|
|
case USB_RECIP_ENDPOINT:
|
|
epnum = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
|
|
hsep = &hsudc->ep[epnum];
|
|
reply = cpu_to_le16(hsep->stopped ? 1 : 0);
|
|
break;
|
|
}
|
|
|
|
INIT_LIST_HEAD(&hsreq.queue);
|
|
hsreq.req.length = 2;
|
|
hsreq.req.buf = &reply;
|
|
hsreq.req.actual = 0;
|
|
hsreq.req.complete = NULL;
|
|
s3c_hsudc_write_fifo(hsep0, &hsreq);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_process_setup - Process control request received on endpoint 0.
|
|
* @hsudc: Device controller on which control request has been received.
|
|
*
|
|
* Read the control request received on endpoint 0, decode it and handle
|
|
* the request.
|
|
*/
|
|
static void s3c_hsudc_process_setup(struct s3c_hsudc *hsudc)
|
|
{
|
|
struct s3c_hsudc_ep *hsep = &hsudc->ep[0];
|
|
struct usb_ctrlrequest ctrl = {0};
|
|
int ret;
|
|
|
|
s3c_hsudc_nuke_ep(hsep, -EPROTO);
|
|
s3c_hsudc_read_setup_pkt(hsudc, (u16 *)&ctrl);
|
|
|
|
if (ctrl.bRequestType & USB_DIR_IN) {
|
|
hsep->bEndpointAddress |= USB_DIR_IN;
|
|
hsudc->ep0state = DATA_STATE_XMIT;
|
|
} else {
|
|
hsep->bEndpointAddress &= ~USB_DIR_IN;
|
|
hsudc->ep0state = DATA_STATE_RECV;
|
|
}
|
|
|
|
switch (ctrl.bRequest) {
|
|
case USB_REQ_SET_ADDRESS:
|
|
if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
|
|
break;
|
|
hsudc->ep0state = WAIT_FOR_SETUP;
|
|
return;
|
|
|
|
case USB_REQ_GET_STATUS:
|
|
if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
|
|
break;
|
|
s3c_hsudc_process_req_status(hsudc, &ctrl);
|
|
return;
|
|
|
|
case USB_REQ_SET_FEATURE:
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
|
|
break;
|
|
s3c_hsudc_handle_reqfeat(hsudc, &ctrl);
|
|
hsudc->ep0state = WAIT_FOR_SETUP;
|
|
return;
|
|
}
|
|
|
|
if (hsudc->driver) {
|
|
spin_unlock(&hsudc->lock);
|
|
ret = hsudc->driver->setup(&hsudc->gadget, &ctrl);
|
|
spin_lock(&hsudc->lock);
|
|
|
|
if (ctrl.bRequest == USB_REQ_SET_CONFIGURATION) {
|
|
hsep->bEndpointAddress &= ~USB_DIR_IN;
|
|
hsudc->ep0state = WAIT_FOR_SETUP;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_err(hsudc->dev, "setup failed, returned %d\n",
|
|
ret);
|
|
s3c_hsudc_set_halt(&hsep->ep, 1);
|
|
hsudc->ep0state = WAIT_FOR_SETUP;
|
|
hsep->bEndpointAddress &= ~USB_DIR_IN;
|
|
}
|
|
}
|
|
}
|
|
|
|
/** s3c_hsudc_handle_ep0_intr - Handle endpoint 0 interrupt.
|
|
* @hsudc: Device controller on which endpoint 0 interrupt has occured.
|
|
*
|
|
* Handle endpoint 0 interrupt when it occurs. EP0 interrupt could occur
|
|
* when a stall handshake is sent to host or data is sent/received on
|
|
* endpoint 0.
|
|
*/
|
|
static void s3c_hsudc_handle_ep0_intr(struct s3c_hsudc *hsudc)
|
|
{
|
|
struct s3c_hsudc_ep *hsep = &hsudc->ep[0];
|
|
struct s3c_hsudc_req *hsreq;
|
|
u32 csr = readl(hsudc->regs + S3C_EP0SR);
|
|
u32 ecr;
|
|
|
|
if (csr & S3C_EP0SR_STALL) {
|
|
ecr = readl(hsudc->regs + S3C_EP0CR);
|
|
ecr &= ~(S3C_ECR_STALL | S3C_ECR_FLUSH);
|
|
writel(ecr, hsudc->regs + S3C_EP0CR);
|
|
|
|
writel(S3C_EP0SR_STALL, hsudc->regs + S3C_EP0SR);
|
|
hsep->stopped = 0;
|
|
|
|
s3c_hsudc_nuke_ep(hsep, -ECONNABORTED);
|
|
hsudc->ep0state = WAIT_FOR_SETUP;
|
|
hsep->bEndpointAddress &= ~USB_DIR_IN;
|
|
return;
|
|
}
|
|
|
|
if (csr & S3C_EP0SR_TX_SUCCESS) {
|
|
writel(S3C_EP0SR_TX_SUCCESS, hsudc->regs + S3C_EP0SR);
|
|
if (ep_is_in(hsep)) {
|
|
if (list_empty(&hsep->queue))
|
|
return;
|
|
|
|
hsreq = list_entry(hsep->queue.next,
|
|
struct s3c_hsudc_req, queue);
|
|
s3c_hsudc_write_fifo(hsep, hsreq);
|
|
}
|
|
}
|
|
|
|
if (csr & S3C_EP0SR_RX_SUCCESS) {
|
|
if (hsudc->ep0state == WAIT_FOR_SETUP)
|
|
s3c_hsudc_process_setup(hsudc);
|
|
else {
|
|
if (!ep_is_in(hsep)) {
|
|
if (list_empty(&hsep->queue))
|
|
return;
|
|
hsreq = list_entry(hsep->queue.next,
|
|
struct s3c_hsudc_req, queue);
|
|
s3c_hsudc_read_fifo(hsep, hsreq);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_ep_enable - Enable a endpoint.
|
|
* @_ep: The endpoint to be enabled.
|
|
* @desc: Endpoint descriptor.
|
|
*
|
|
* Enables a endpoint when called from the gadget driver. Endpoint stall if
|
|
* any is cleared, transfer type is configured and endpoint interrupt is
|
|
* enabled.
|
|
*/
|
|
static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct s3c_hsudc_ep *hsep;
|
|
struct s3c_hsudc *hsudc;
|
|
unsigned long flags;
|
|
u32 ecr = 0;
|
|
|
|
hsep = container_of(_ep, struct s3c_hsudc_ep, ep);
|
|
if (!_ep || !desc || hsep->desc || _ep->name == ep0name
|
|
|| desc->bDescriptorType != USB_DT_ENDPOINT
|
|
|| hsep->bEndpointAddress != desc->bEndpointAddress
|
|
|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
|
|
return -EINVAL;
|
|
|
|
if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
|
|
&& usb_endpoint_maxp(desc) != ep_maxpacket(hsep))
|
|
|| !desc->wMaxPacketSize)
|
|
return -ERANGE;
|
|
|
|
hsudc = hsep->dev;
|
|
if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN)
|
|
return -ESHUTDOWN;
|
|
|
|
spin_lock_irqsave(&hsudc->lock, flags);
|
|
|
|
set_index(hsudc, hsep->bEndpointAddress);
|
|
ecr |= ((usb_endpoint_xfer_int(desc)) ? S3C_ECR_IEMS : S3C_ECR_DUEN);
|
|
writel(ecr, hsudc->regs + S3C_ECR);
|
|
|
|
hsep->stopped = hsep->wedge = 0;
|
|
hsep->desc = desc;
|
|
hsep->ep.maxpacket = usb_endpoint_maxp(desc);
|
|
|
|
s3c_hsudc_set_halt(_ep, 0);
|
|
__set_bit(ep_index(hsep), hsudc->regs + S3C_EIER);
|
|
|
|
spin_unlock_irqrestore(&hsudc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_ep_disable - Disable a endpoint.
|
|
* @_ep: The endpoint to be disabled.
|
|
* @desc: Endpoint descriptor.
|
|
*
|
|
* Disables a endpoint when called from the gadget driver.
|
|
*/
|
|
static int s3c_hsudc_ep_disable(struct usb_ep *_ep)
|
|
{
|
|
struct s3c_hsudc_ep *hsep = our_ep(_ep);
|
|
struct s3c_hsudc *hsudc = hsep->dev;
|
|
unsigned long flags;
|
|
|
|
if (!_ep || !hsep->desc)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&hsudc->lock, flags);
|
|
|
|
set_index(hsudc, hsep->bEndpointAddress);
|
|
__clear_bit(ep_index(hsep), hsudc->regs + S3C_EIER);
|
|
|
|
s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
|
|
|
|
hsep->desc = 0;
|
|
hsep->stopped = 1;
|
|
|
|
spin_unlock_irqrestore(&hsudc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_alloc_request - Allocate a new request.
|
|
* @_ep: Endpoint for which request is allocated (not used).
|
|
* @gfp_flags: Flags used for the allocation.
|
|
*
|
|
* Allocates a single transfer request structure when called from gadget driver.
|
|
*/
|
|
static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct s3c_hsudc_req *hsreq;
|
|
|
|
hsreq = kzalloc(sizeof *hsreq, gfp_flags);
|
|
if (!hsreq)
|
|
return 0;
|
|
|
|
INIT_LIST_HEAD(&hsreq->queue);
|
|
return &hsreq->req;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_free_request - Deallocate a request.
|
|
* @ep: Endpoint for which request is deallocated (not used).
|
|
* @_req: Request to be deallocated.
|
|
*
|
|
* Allocates a single transfer request structure when called from gadget driver.
|
|
*/
|
|
static void s3c_hsudc_free_request(struct usb_ep *ep, struct usb_request *_req)
|
|
{
|
|
struct s3c_hsudc_req *hsreq;
|
|
|
|
hsreq = container_of(_req, struct s3c_hsudc_req, req);
|
|
WARN_ON(!list_empty(&hsreq->queue));
|
|
kfree(hsreq);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_queue - Queue a transfer request for the endpoint.
|
|
* @_ep: Endpoint for which the request is queued.
|
|
* @_req: Request to be queued.
|
|
* @gfp_flags: Not used.
|
|
*
|
|
* Start or enqueue a request for a endpoint when called from gadget driver.
|
|
*/
|
|
static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct s3c_hsudc_req *hsreq;
|
|
struct s3c_hsudc_ep *hsep;
|
|
struct s3c_hsudc *hsudc;
|
|
unsigned long flags;
|
|
u32 offset;
|
|
u32 csr;
|
|
|
|
hsreq = container_of(_req, struct s3c_hsudc_req, req);
|
|
if ((!_req || !_req->complete || !_req->buf ||
|
|
!list_empty(&hsreq->queue)))
|
|
return -EINVAL;
|
|
|
|
hsep = container_of(_ep, struct s3c_hsudc_ep, ep);
|
|
hsudc = hsep->dev;
|
|
if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN)
|
|
return -ESHUTDOWN;
|
|
|
|
spin_lock_irqsave(&hsudc->lock, flags);
|
|
set_index(hsudc, hsep->bEndpointAddress);
|
|
|
|
_req->status = -EINPROGRESS;
|
|
_req->actual = 0;
|
|
|
|
if (!ep_index(hsep) && _req->length == 0) {
|
|
hsudc->ep0state = WAIT_FOR_SETUP;
|
|
s3c_hsudc_complete_request(hsep, hsreq, 0);
|
|
spin_unlock_irqrestore(&hsudc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
if (list_empty(&hsep->queue) && !hsep->stopped) {
|
|
offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR;
|
|
if (ep_is_in(hsep)) {
|
|
csr = readl((u32)hsudc->regs + offset);
|
|
if (!(csr & S3C_ESR_TX_SUCCESS) &&
|
|
(s3c_hsudc_write_fifo(hsep, hsreq) == 1))
|
|
hsreq = 0;
|
|
} else {
|
|
csr = readl((u32)hsudc->regs + offset);
|
|
if ((csr & S3C_ESR_RX_SUCCESS)
|
|
&& (s3c_hsudc_read_fifo(hsep, hsreq) == 1))
|
|
hsreq = 0;
|
|
}
|
|
}
|
|
|
|
if (hsreq != 0)
|
|
list_add_tail(&hsreq->queue, &hsep->queue);
|
|
|
|
spin_unlock_irqrestore(&hsudc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_dequeue - Dequeue a transfer request from an endpoint.
|
|
* @_ep: Endpoint from which the request is dequeued.
|
|
* @_req: Request to be dequeued.
|
|
*
|
|
* Dequeue a request from a endpoint when called from gadget driver.
|
|
*/
|
|
static int s3c_hsudc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct s3c_hsudc_ep *hsep = our_ep(_ep);
|
|
struct s3c_hsudc *hsudc = hsep->dev;
|
|
struct s3c_hsudc_req *hsreq;
|
|
unsigned long flags;
|
|
|
|
hsep = container_of(_ep, struct s3c_hsudc_ep, ep);
|
|
if (!_ep || hsep->ep.name == ep0name)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&hsudc->lock, flags);
|
|
|
|
list_for_each_entry(hsreq, &hsep->queue, queue) {
|
|
if (&hsreq->req == _req)
|
|
break;
|
|
}
|
|
if (&hsreq->req != _req) {
|
|
spin_unlock_irqrestore(&hsudc->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
set_index(hsudc, hsep->bEndpointAddress);
|
|
s3c_hsudc_complete_request(hsep, hsreq, -ECONNRESET);
|
|
|
|
spin_unlock_irqrestore(&hsudc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_ep_ops s3c_hsudc_ep_ops = {
|
|
.enable = s3c_hsudc_ep_enable,
|
|
.disable = s3c_hsudc_ep_disable,
|
|
.alloc_request = s3c_hsudc_alloc_request,
|
|
.free_request = s3c_hsudc_free_request,
|
|
.queue = s3c_hsudc_queue,
|
|
.dequeue = s3c_hsudc_dequeue,
|
|
.set_halt = s3c_hsudc_set_halt,
|
|
.set_wedge = s3c_hsudc_set_wedge,
|
|
};
|
|
|
|
/**
|
|
* s3c_hsudc_initep - Initialize a endpoint to default state.
|
|
* @hsudc - Reference to the device controller.
|
|
* @hsep - Endpoint to be initialized.
|
|
* @epnum - Address to be assigned to the endpoint.
|
|
*
|
|
* Initialize a endpoint with default configuration.
|
|
*/
|
|
static void s3c_hsudc_initep(struct s3c_hsudc *hsudc,
|
|
struct s3c_hsudc_ep *hsep, int epnum)
|
|
{
|
|
char *dir;
|
|
|
|
if ((epnum % 2) == 0) {
|
|
dir = "out";
|
|
} else {
|
|
dir = "in";
|
|
hsep->bEndpointAddress = USB_DIR_IN;
|
|
}
|
|
|
|
hsep->bEndpointAddress |= epnum;
|
|
if (epnum)
|
|
snprintf(hsep->name, sizeof(hsep->name), "ep%d%s", epnum, dir);
|
|
else
|
|
snprintf(hsep->name, sizeof(hsep->name), "%s", ep0name);
|
|
|
|
INIT_LIST_HEAD(&hsep->queue);
|
|
INIT_LIST_HEAD(&hsep->ep.ep_list);
|
|
if (epnum)
|
|
list_add_tail(&hsep->ep.ep_list, &hsudc->gadget.ep_list);
|
|
|
|
hsep->dev = hsudc;
|
|
hsep->ep.name = hsep->name;
|
|
hsep->ep.maxpacket = epnum ? 512 : 64;
|
|
hsep->ep.ops = &s3c_hsudc_ep_ops;
|
|
hsep->fifo = hsudc->regs + S3C_BR(epnum);
|
|
hsep->desc = 0;
|
|
hsep->stopped = 0;
|
|
hsep->wedge = 0;
|
|
|
|
set_index(hsudc, epnum);
|
|
writel(hsep->ep.maxpacket, hsudc->regs + S3C_MPR);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_setup_ep - Configure all endpoints to default state.
|
|
* @hsudc: Reference to device controller.
|
|
*
|
|
* Configures all endpoints to default state.
|
|
*/
|
|
static void s3c_hsudc_setup_ep(struct s3c_hsudc *hsudc)
|
|
{
|
|
int epnum;
|
|
|
|
hsudc->ep0state = WAIT_FOR_SETUP;
|
|
INIT_LIST_HEAD(&hsudc->gadget.ep_list);
|
|
for (epnum = 0; epnum < hsudc->pd->epnum; epnum++)
|
|
s3c_hsudc_initep(hsudc, &hsudc->ep[epnum], epnum);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_reconfig - Reconfigure the device controller to default state.
|
|
* @hsudc: Reference to device controller.
|
|
*
|
|
* Reconfigures the device controller registers to a default state.
|
|
*/
|
|
static void s3c_hsudc_reconfig(struct s3c_hsudc *hsudc)
|
|
{
|
|
writel(0xAA, hsudc->regs + S3C_EDR);
|
|
writel(1, hsudc->regs + S3C_EIER);
|
|
writel(0, hsudc->regs + S3C_TR);
|
|
writel(S3C_SCR_DTZIEN_EN | S3C_SCR_RRD_EN | S3C_SCR_SUS_EN |
|
|
S3C_SCR_RST_EN, hsudc->regs + S3C_SCR);
|
|
writel(0, hsudc->regs + S3C_EP0CR);
|
|
|
|
s3c_hsudc_setup_ep(hsudc);
|
|
}
|
|
|
|
/**
|
|
* s3c_hsudc_irq - Interrupt handler for device controller.
|
|
* @irq: Not used.
|
|
* @_dev: Reference to the device controller.
|
|
*
|
|
* Interrupt handler for the device controller. This handler handles controller
|
|
* interrupts and endpoint interrupts.
|
|
*/
|
|
static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)
|
|
{
|
|
struct s3c_hsudc *hsudc = _dev;
|
|
struct s3c_hsudc_ep *hsep;
|
|
u32 ep_intr;
|
|
u32 sys_status;
|
|
u32 ep_idx;
|
|
|
|
spin_lock(&hsudc->lock);
|
|
|
|
sys_status = readl(hsudc->regs + S3C_SSR);
|
|
ep_intr = readl(hsudc->regs + S3C_EIR) & 0x3FF;
|
|
|
|
if (!ep_intr && !(sys_status & S3C_SSR_DTZIEN_EN)) {
|
|
spin_unlock(&hsudc->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (sys_status) {
|
|
if (sys_status & S3C_SSR_VBUSON)
|
|
writel(S3C_SSR_VBUSON, hsudc->regs + S3C_SSR);
|
|
|
|
if (sys_status & S3C_SSR_ERR)
|
|
writel(S3C_SSR_ERR, hsudc->regs + S3C_SSR);
|
|
|
|
if (sys_status & S3C_SSR_SDE) {
|
|
writel(S3C_SSR_SDE, hsudc->regs + S3C_SSR);
|
|
hsudc->gadget.speed = (sys_status & S3C_SSR_HSP) ?
|
|
USB_SPEED_HIGH : USB_SPEED_FULL;
|
|
}
|
|
|
|
if (sys_status & S3C_SSR_SUSPEND) {
|
|
writel(S3C_SSR_SUSPEND, hsudc->regs + S3C_SSR);
|
|
if (hsudc->gadget.speed != USB_SPEED_UNKNOWN
|
|
&& hsudc->driver && hsudc->driver->suspend)
|
|
hsudc->driver->suspend(&hsudc->gadget);
|
|
}
|
|
|
|
if (sys_status & S3C_SSR_RESUME) {
|
|
writel(S3C_SSR_RESUME, hsudc->regs + S3C_SSR);
|
|
if (hsudc->gadget.speed != USB_SPEED_UNKNOWN
|
|
&& hsudc->driver && hsudc->driver->resume)
|
|
hsudc->driver->resume(&hsudc->gadget);
|
|
}
|
|
|
|
if (sys_status & S3C_SSR_RESET) {
|
|
writel(S3C_SSR_RESET, hsudc->regs + S3C_SSR);
|
|
for (ep_idx = 0; ep_idx < hsudc->pd->epnum; ep_idx++) {
|
|
hsep = &hsudc->ep[ep_idx];
|
|
hsep->stopped = 1;
|
|
s3c_hsudc_nuke_ep(hsep, -ECONNRESET);
|
|
}
|
|
s3c_hsudc_reconfig(hsudc);
|
|
hsudc->ep0state = WAIT_FOR_SETUP;
|
|
}
|
|
}
|
|
|
|
if (ep_intr & S3C_EIR_EP0) {
|
|
writel(S3C_EIR_EP0, hsudc->regs + S3C_EIR);
|
|
set_index(hsudc, 0);
|
|
s3c_hsudc_handle_ep0_intr(hsudc);
|
|
}
|
|
|
|
ep_intr >>= 1;
|
|
ep_idx = 1;
|
|
while (ep_intr) {
|
|
if (ep_intr & 1) {
|
|
hsep = &hsudc->ep[ep_idx];
|
|
set_index(hsudc, ep_idx);
|
|
writel(1 << ep_idx, hsudc->regs + S3C_EIR);
|
|
if (ep_is_in(hsep))
|
|
s3c_hsudc_epin_intr(hsudc, ep_idx);
|
|
else
|
|
s3c_hsudc_epout_intr(hsudc, ep_idx);
|
|
}
|
|
ep_intr >>= 1;
|
|
ep_idx++;
|
|
}
|
|
|
|
spin_unlock(&hsudc->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int s3c_hsudc_start(struct usb_gadget_driver *driver,
|
|
int (*bind)(struct usb_gadget *))
|
|
{
|
|
struct s3c_hsudc *hsudc = the_controller;
|
|
int ret;
|
|
|
|
if (!driver
|
|
|| (driver->speed != USB_SPEED_FULL &&
|
|
driver->speed != USB_SPEED_HIGH)
|
|
|| !bind
|
|
|| !driver->unbind || !driver->disconnect || !driver->setup)
|
|
return -EINVAL;
|
|
|
|
if (!hsudc)
|
|
return -ENODEV;
|
|
|
|
if (hsudc->driver)
|
|
return -EBUSY;
|
|
|
|
hsudc->driver = driver;
|
|
hsudc->gadget.dev.driver = &driver->driver;
|
|
hsudc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
ret = device_add(&hsudc->gadget.dev);
|
|
if (ret) {
|
|
dev_err(hsudc->dev, "failed to probe gadget device");
|
|
return ret;
|
|
}
|
|
|
|
ret = bind(&hsudc->gadget);
|
|
if (ret) {
|
|
dev_err(hsudc->dev, "%s: bind failed\n", hsudc->gadget.name);
|
|
device_del(&hsudc->gadget.dev);
|
|
|
|
hsudc->driver = NULL;
|
|
hsudc->gadget.dev.driver = NULL;
|
|
return ret;
|
|
}
|
|
|
|
/* connect to bus through transceiver */
|
|
if (hsudc->transceiver) {
|
|
ret = otg_set_peripheral(hsudc->transceiver, &hsudc->gadget);
|
|
if (ret) {
|
|
dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
|
|
hsudc->gadget.name);
|
|
driver->unbind(&hsudc->gadget);
|
|
|
|
device_del(&hsudc->gadget.dev);
|
|
|
|
hsudc->driver = NULL;
|
|
hsudc->gadget.dev.driver = NULL;
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
enable_irq(hsudc->irq);
|
|
dev_info(hsudc->dev, "bound driver %s\n", driver->driver.name);
|
|
|
|
s3c_hsudc_reconfig(hsudc);
|
|
s3c_hsudc_init_phy();
|
|
if (hsudc->pd->gpio_init)
|
|
hsudc->pd->gpio_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
|
|
{
|
|
struct s3c_hsudc *hsudc = the_controller;
|
|
unsigned long flags;
|
|
|
|
if (!hsudc)
|
|
return -ENODEV;
|
|
|
|
if (!driver || driver != hsudc->driver || !driver->unbind)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&hsudc->lock, flags);
|
|
hsudc->driver = 0;
|
|
s3c_hsudc_uninit_phy();
|
|
if (hsudc->pd->gpio_uninit)
|
|
hsudc->pd->gpio_uninit();
|
|
s3c_hsudc_stop_activity(hsudc, driver);
|
|
spin_unlock_irqrestore(&hsudc->lock, flags);
|
|
|
|
if (hsudc->transceiver)
|
|
(void) otg_set_peripheral(hsudc->transceiver, NULL);
|
|
|
|
driver->unbind(&hsudc->gadget);
|
|
device_del(&hsudc->gadget.dev);
|
|
disable_irq(hsudc->irq);
|
|
|
|
dev_info(hsudc->dev, "unregistered gadget driver '%s'\n",
|
|
driver->driver.name);
|
|
return 0;
|
|
}
|
|
|
|
static inline u32 s3c_hsudc_read_frameno(struct s3c_hsudc *hsudc)
|
|
{
|
|
return readl(hsudc->regs + S3C_FNR) & 0x3FF;
|
|
}
|
|
|
|
static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)
|
|
{
|
|
return s3c_hsudc_read_frameno(to_hsudc(gadget));
|
|
}
|
|
|
|
static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
|
|
{
|
|
struct s3c_hsudc *hsudc = the_controller;
|
|
|
|
if (!hsudc)
|
|
return -ENODEV;
|
|
|
|
if (hsudc->transceiver)
|
|
return otg_set_power(hsudc->transceiver, mA);
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
|
|
.get_frame = s3c_hsudc_gadget_getframe,
|
|
.start = s3c_hsudc_start,
|
|
.stop = s3c_hsudc_stop,
|
|
.vbus_draw = s3c_hsudc_vbus_draw,
|
|
};
|
|
|
|
static int s3c_hsudc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct s3c_hsudc *hsudc;
|
|
struct s3c24xx_hsudc_platdata *pd = pdev->dev.platform_data;
|
|
int ret;
|
|
|
|
hsudc = kzalloc(sizeof(struct s3c_hsudc) +
|
|
sizeof(struct s3c_hsudc_ep) * pd->epnum,
|
|
GFP_KERNEL);
|
|
if (!hsudc) {
|
|
dev_err(dev, "cannot allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
the_controller = hsudc;
|
|
platform_set_drvdata(pdev, dev);
|
|
hsudc->dev = dev;
|
|
hsudc->pd = pdev->dev.platform_data;
|
|
|
|
hsudc->transceiver = otg_get_transceiver();
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(dev, "unable to obtain driver resource data\n");
|
|
ret = -ENODEV;
|
|
goto err_res;
|
|
}
|
|
|
|
hsudc->mem_rsrc = request_mem_region(res->start, resource_size(res),
|
|
dev_name(&pdev->dev));
|
|
if (!hsudc->mem_rsrc) {
|
|
dev_err(dev, "failed to reserve register area\n");
|
|
ret = -ENODEV;
|
|
goto err_res;
|
|
}
|
|
|
|
hsudc->regs = ioremap(res->start, resource_size(res));
|
|
if (!hsudc->regs) {
|
|
dev_err(dev, "error mapping device register area\n");
|
|
ret = -EBUSY;
|
|
goto err_remap;
|
|
}
|
|
|
|
spin_lock_init(&hsudc->lock);
|
|
|
|
device_initialize(&hsudc->gadget.dev);
|
|
dev_set_name(&hsudc->gadget.dev, "gadget");
|
|
|
|
hsudc->gadget.is_dualspeed = 1;
|
|
hsudc->gadget.ops = &s3c_hsudc_gadget_ops;
|
|
hsudc->gadget.name = dev_name(dev);
|
|
hsudc->gadget.dev.parent = dev;
|
|
hsudc->gadget.dev.dma_mask = dev->dma_mask;
|
|
hsudc->gadget.ep0 = &hsudc->ep[0].ep;
|
|
|
|
hsudc->gadget.is_otg = 0;
|
|
hsudc->gadget.is_a_peripheral = 0;
|
|
|
|
s3c_hsudc_setup_ep(hsudc);
|
|
|
|
ret = platform_get_irq(pdev, 0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "unable to obtain IRQ number\n");
|
|
goto err_irq;
|
|
}
|
|
hsudc->irq = ret;
|
|
|
|
ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc);
|
|
if (ret < 0) {
|
|
dev_err(dev, "irq request failed\n");
|
|
goto err_irq;
|
|
}
|
|
|
|
hsudc->uclk = clk_get(&pdev->dev, "usb-device");
|
|
if (IS_ERR(hsudc->uclk)) {
|
|
dev_err(dev, "failed to find usb-device clock source\n");
|
|
ret = PTR_ERR(hsudc->uclk);
|
|
goto err_clk;
|
|
}
|
|
clk_enable(hsudc->uclk);
|
|
|
|
local_irq_disable();
|
|
|
|
disable_irq(hsudc->irq);
|
|
local_irq_enable();
|
|
|
|
ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget);
|
|
if (ret)
|
|
goto err_add_udc;
|
|
|
|
return 0;
|
|
err_add_udc:
|
|
clk_disable(hsudc->uclk);
|
|
clk_put(hsudc->uclk);
|
|
err_clk:
|
|
free_irq(hsudc->irq, hsudc);
|
|
err_irq:
|
|
iounmap(hsudc->regs);
|
|
|
|
err_remap:
|
|
release_resource(hsudc->mem_rsrc);
|
|
kfree(hsudc->mem_rsrc);
|
|
|
|
err_res:
|
|
kfree(hsudc);
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver s3c_hsudc_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "s3c-hsudc",
|
|
},
|
|
.probe = s3c_hsudc_probe,
|
|
};
|
|
MODULE_ALIAS("platform:s3c-hsudc");
|
|
|
|
static int __init s3c_hsudc_modinit(void)
|
|
{
|
|
return platform_driver_register(&s3c_hsudc_driver);
|
|
}
|
|
|
|
static void __exit s3c_hsudc_modexit(void)
|
|
{
|
|
platform_driver_unregister(&s3c_hsudc_driver);
|
|
}
|
|
|
|
module_init(s3c_hsudc_modinit);
|
|
module_exit(s3c_hsudc_modexit);
|
|
|
|
MODULE_DESCRIPTION("Samsung S3C24XX USB high-speed controller driver");
|
|
MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
|
|
MODULE_LICENSE("GPL");
|