mirror of https://gitee.com/openkylin/linux.git
451 lines
14 KiB
C
451 lines
14 KiB
C
#ifndef _MXSER_H
|
|
#define _MXSER_H
|
|
|
|
/*
|
|
* Semi-public control interfaces
|
|
*/
|
|
|
|
/*
|
|
* MOXA ioctls
|
|
*/
|
|
|
|
#define MOXA 0x400
|
|
#define MOXA_GETDATACOUNT (MOXA + 23)
|
|
#define MOXA_GET_CONF (MOXA + 35)
|
|
#define MOXA_DIAGNOSE (MOXA + 50)
|
|
#define MOXA_CHKPORTENABLE (MOXA + 60)
|
|
#define MOXA_HighSpeedOn (MOXA + 61)
|
|
#define MOXA_GET_MAJOR (MOXA + 63)
|
|
#define MOXA_GET_CUMAJOR (MOXA + 64)
|
|
#define MOXA_GETMSTATUS (MOXA + 65)
|
|
#define MOXA_SET_OP_MODE (MOXA + 66)
|
|
#define MOXA_GET_OP_MODE (MOXA + 67)
|
|
|
|
#define RS232_MODE 0
|
|
#define RS485_2WIRE_MODE 1
|
|
#define RS422_MODE 2
|
|
#define RS485_4WIRE_MODE 3
|
|
#define OP_MODE_MASK 3
|
|
// above add by Victor Yu. 01-05-2004
|
|
|
|
#define TTY_THRESHOLD_THROTTLE 128
|
|
|
|
#define LO_WATER (TTY_FLIPBUF_SIZE)
|
|
#define HI_WATER (TTY_FLIPBUF_SIZE*2*3/4)
|
|
|
|
// added by James. 03-11-2004.
|
|
#define MOXA_SDS_GETICOUNTER (MOXA + 68)
|
|
#define MOXA_SDS_RSTICOUNTER (MOXA + 69)
|
|
// (above) added by James.
|
|
|
|
#define MOXA_ASPP_OQUEUE (MOXA + 70)
|
|
#define MOXA_ASPP_SETBAUD (MOXA + 71)
|
|
#define MOXA_ASPP_GETBAUD (MOXA + 72)
|
|
#define MOXA_ASPP_MON (MOXA + 73)
|
|
#define MOXA_ASPP_LSTATUS (MOXA + 74)
|
|
#define MOXA_ASPP_MON_EXT (MOXA + 75)
|
|
#define MOXA_SET_BAUD_METHOD (MOXA + 76)
|
|
|
|
|
|
/* --------------------------------------------------- */
|
|
|
|
#define NPPI_NOTIFY_PARITY 0x01
|
|
#define NPPI_NOTIFY_FRAMING 0x02
|
|
#define NPPI_NOTIFY_HW_OVERRUN 0x04
|
|
#define NPPI_NOTIFY_SW_OVERRUN 0x08
|
|
#define NPPI_NOTIFY_BREAK 0x10
|
|
|
|
#define NPPI_NOTIFY_CTSHOLD 0x01 // Tx hold by CTS low
|
|
#define NPPI_NOTIFY_DSRHOLD 0x02 // Tx hold by DSR low
|
|
#define NPPI_NOTIFY_XOFFHOLD 0x08 // Tx hold by Xoff received
|
|
#define NPPI_NOTIFY_XOFFXENT 0x10 // Xoff Sent
|
|
|
|
//CheckIsMoxaMust return value
|
|
#define MOXA_OTHER_UART 0x00
|
|
#define MOXA_MUST_MU150_HWID 0x01
|
|
#define MOXA_MUST_MU860_HWID 0x02
|
|
|
|
// follow just for Moxa Must chip define.
|
|
//
|
|
// when LCR register (offset 0x03) write following value,
|
|
// the Must chip will enter enchance mode. And write value
|
|
// on EFR (offset 0x02) bit 6,7 to change bank.
|
|
#define MOXA_MUST_ENTER_ENCHANCE 0xBF
|
|
|
|
// when enhance mode enable, access on general bank register
|
|
#define MOXA_MUST_GDL_REGISTER 0x07
|
|
#define MOXA_MUST_GDL_MASK 0x7F
|
|
#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80
|
|
|
|
#define MOXA_MUST_LSR_RERR 0x80 // error in receive FIFO
|
|
// enchance register bank select and enchance mode setting register
|
|
// when LCR register equal to 0xBF
|
|
#define MOXA_MUST_EFR_REGISTER 0x02
|
|
// enchance mode enable
|
|
#define MOXA_MUST_EFR_EFRB_ENABLE 0x10
|
|
// enchance reister bank set 0, 1, 2
|
|
#define MOXA_MUST_EFR_BANK0 0x00
|
|
#define MOXA_MUST_EFR_BANK1 0x40
|
|
#define MOXA_MUST_EFR_BANK2 0x80
|
|
#define MOXA_MUST_EFR_BANK3 0xC0
|
|
#define MOXA_MUST_EFR_BANK_MASK 0xC0
|
|
|
|
// set XON1 value register, when LCR=0xBF and change to bank0
|
|
#define MOXA_MUST_XON1_REGISTER 0x04
|
|
|
|
// set XON2 value register, when LCR=0xBF and change to bank0
|
|
#define MOXA_MUST_XON2_REGISTER 0x05
|
|
|
|
// set XOFF1 value register, when LCR=0xBF and change to bank0
|
|
#define MOXA_MUST_XOFF1_REGISTER 0x06
|
|
|
|
// set XOFF2 value register, when LCR=0xBF and change to bank0
|
|
#define MOXA_MUST_XOFF2_REGISTER 0x07
|
|
|
|
#define MOXA_MUST_RBRTL_REGISTER 0x04
|
|
#define MOXA_MUST_RBRTH_REGISTER 0x05
|
|
#define MOXA_MUST_RBRTI_REGISTER 0x06
|
|
#define MOXA_MUST_THRTL_REGISTER 0x07
|
|
#define MOXA_MUST_ENUM_REGISTER 0x04
|
|
#define MOXA_MUST_HWID_REGISTER 0x05
|
|
#define MOXA_MUST_ECR_REGISTER 0x06
|
|
#define MOXA_MUST_CSR_REGISTER 0x07
|
|
|
|
// good data mode enable
|
|
#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20
|
|
// only good data put into RxFIFO
|
|
#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10
|
|
|
|
// enable CTS interrupt
|
|
#define MOXA_MUST_IER_ECTSI 0x80
|
|
// eanble RTS interrupt
|
|
#define MOXA_MUST_IER_ERTSI 0x40
|
|
// enable Xon/Xoff interrupt
|
|
#define MOXA_MUST_IER_XINT 0x20
|
|
// enable GDA interrupt
|
|
#define MOXA_MUST_IER_EGDAI 0x10
|
|
|
|
#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI)
|
|
|
|
// GDA interrupt pending
|
|
#define MOXA_MUST_IIR_GDA 0x1C
|
|
#define MOXA_MUST_IIR_RDA 0x04
|
|
#define MOXA_MUST_IIR_RTO 0x0C
|
|
#define MOXA_MUST_IIR_LSR 0x06
|
|
|
|
// recieved Xon/Xoff or specical interrupt pending
|
|
#define MOXA_MUST_IIR_XSC 0x10
|
|
|
|
// RTS/CTS change state interrupt pending
|
|
#define MOXA_MUST_IIR_RTSCTS 0x20
|
|
#define MOXA_MUST_IIR_MASK 0x3E
|
|
|
|
#define MOXA_MUST_MCR_XON_FLAG 0x40
|
|
#define MOXA_MUST_MCR_XON_ANY 0x80
|
|
#define MOXA_MUST_MCR_TX_XON 0x08
|
|
|
|
|
|
// software flow control on chip mask value
|
|
#define MOXA_MUST_EFR_SF_MASK 0x0F
|
|
// send Xon1/Xoff1
|
|
#define MOXA_MUST_EFR_SF_TX1 0x08
|
|
// send Xon2/Xoff2
|
|
#define MOXA_MUST_EFR_SF_TX2 0x04
|
|
// send Xon1,Xon2/Xoff1,Xoff2
|
|
#define MOXA_MUST_EFR_SF_TX12 0x0C
|
|
// don't send Xon/Xoff
|
|
#define MOXA_MUST_EFR_SF_TX_NO 0x00
|
|
// Tx software flow control mask
|
|
#define MOXA_MUST_EFR_SF_TX_MASK 0x0C
|
|
// don't receive Xon/Xoff
|
|
#define MOXA_MUST_EFR_SF_RX_NO 0x00
|
|
// receive Xon1/Xoff1
|
|
#define MOXA_MUST_EFR_SF_RX1 0x02
|
|
// receive Xon2/Xoff2
|
|
#define MOXA_MUST_EFR_SF_RX2 0x01
|
|
// receive Xon1,Xon2/Xoff1,Xoff2
|
|
#define MOXA_MUST_EFR_SF_RX12 0x03
|
|
// Rx software flow control mask
|
|
#define MOXA_MUST_EFR_SF_RX_MASK 0x03
|
|
|
|
//#define MOXA_MUST_MIN_XOFFLIMIT 66
|
|
//#define MOXA_MUST_MIN_XONLIMIT 20
|
|
//#define ID1_RX_TRIG 120
|
|
|
|
|
|
#define CHECK_MOXA_MUST_XOFFLIMIT(info) { \
|
|
if ( (info)->IsMoxaMustChipFlag && \
|
|
(info)->HandFlow.XoffLimit < MOXA_MUST_MIN_XOFFLIMIT ) { \
|
|
(info)->HandFlow.XoffLimit = MOXA_MUST_MIN_XOFFLIMIT; \
|
|
(info)->HandFlow.XonLimit = MOXA_MUST_MIN_XONLIMIT; \
|
|
} \
|
|
}
|
|
|
|
#define ENABLE_MOXA_MUST_ENCHANCE_MODE(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr |= MOXA_MUST_EFR_EFRB_ENABLE; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define DISABLE_MOXA_MUST_ENCHANCE_MODE(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_XON1_VALUE(baseio, Value) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK0; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)(Value), (baseio)+MOXA_MUST_XON1_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_XON2_VALUE(baseio, Value) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK0; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)(Value), (baseio)+MOXA_MUST_XON2_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_XOFF1_VALUE(baseio, Value) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK0; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)(Value), (baseio)+MOXA_MUST_XOFF1_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_XOFF2_VALUE(baseio, Value) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK0; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)(Value), (baseio)+MOXA_MUST_XOFF2_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_RBRTL_VALUE(baseio, Value) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK1; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)(Value), (baseio)+MOXA_MUST_RBRTL_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_RBRTH_VALUE(baseio, Value) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK1; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)(Value), (baseio)+MOXA_MUST_RBRTH_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_RBRTI_VALUE(baseio, Value) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK1; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)(Value), (baseio)+MOXA_MUST_RBRTI_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_THRTL_VALUE(baseio, Value) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK1; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)(Value), (baseio)+MOXA_MUST_THRTL_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
//#define MOXA_MUST_RBRL_VALUE 4
|
|
#define SET_MOXA_MUST_FIFO_VALUE(info) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((info)->base+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (info)->base+UART_LCR); \
|
|
__efr = inb((info)->base+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK1; \
|
|
outb(__efr, (info)->base+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)((info)->rx_high_water), (info)->base+MOXA_MUST_RBRTH_REGISTER); \
|
|
outb((u8)((info)->rx_trigger), (info)->base+MOXA_MUST_RBRTI_REGISTER); \
|
|
outb((u8)((info)->rx_low_water), (info)->base+MOXA_MUST_RBRTL_REGISTER); \
|
|
outb(__oldlcr, (info)->base+UART_LCR); \
|
|
}
|
|
|
|
|
|
|
|
#define SET_MOXA_MUST_ENUM_VALUE(baseio, Value) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK2; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb((u8)(Value), (baseio)+MOXA_MUST_ENUM_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define GET_MOXA_MUST_HARDWARE_ID(baseio, pId) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_BANK_MASK; \
|
|
__efr |= MOXA_MUST_EFR_BANK2; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
*pId = inb((baseio)+MOXA_MUST_HWID_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_SF_MASK; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_JUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_SF_MASK; \
|
|
__efr |= MOXA_MUST_EFR_SF_TX1; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \
|
|
__efr |= MOXA_MUST_EFR_SF_TX1; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define SET_MOXA_MUST_JUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_SF_MASK; \
|
|
__efr |= MOXA_MUST_EFR_SF_RX1; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \
|
|
__efr |= MOXA_MUST_EFR_SF_RX1; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define ENABLE_MOXA_MUST_TX_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
|
|
u8 __oldlcr, __efr; \
|
|
__oldlcr = inb((baseio)+UART_LCR); \
|
|
outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
|
|
__efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
__efr &= ~MOXA_MUST_EFR_SF_MASK; \
|
|
__efr |= (MOXA_MUST_EFR_SF_RX1|MOXA_MUST_EFR_SF_TX1); \
|
|
outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
|
|
outb(__oldlcr, (baseio)+UART_LCR); \
|
|
}
|
|
|
|
#define ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(baseio) { \
|
|
u8 __oldmcr; \
|
|
__oldmcr = inb((baseio)+UART_MCR); \
|
|
__oldmcr |= MOXA_MUST_MCR_XON_ANY; \
|
|
outb(__oldmcr, (baseio)+UART_MCR); \
|
|
}
|
|
|
|
#define DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(baseio) { \
|
|
u8 __oldmcr; \
|
|
__oldmcr = inb((baseio)+UART_MCR); \
|
|
__oldmcr &= ~MOXA_MUST_MCR_XON_ANY; \
|
|
outb(__oldmcr, (baseio)+UART_MCR); \
|
|
}
|
|
|
|
#define READ_MOXA_MUST_GDL(baseio) inb((baseio)+MOXA_MUST_GDL_REGISTER)
|
|
|
|
|
|
#ifndef INIT_WORK
|
|
#define INIT_WORK(_work, _func, _data){ \
|
|
_data->tqueue.routine = _func;\
|
|
_data->tqueue.data = _data;\
|
|
}
|
|
#endif
|
|
|
|
#endif
|