linux/drivers/net/wireless/ath/ath10k
Peter Oh e33a99e227 ath10k: set SM power save disabled to default value
Use SMPS disabled as default because FW does not indicate
any support of SMPS.

This change will help STAs out that don’t support SMPS from
sticking on 1SS, since they don’t have method to change it
back to multiple chains.

This change also should not affect power consumption of STAs
supporting SMPS, because they are capable to switch the mode
to dynamic or static either at the end of frame sequence or
by using SMPS action frame.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07 14:56:23 +02:00
..
Kconfig ath10k: print crc32 checksums for firmware and board files 2015-11-30 16:54:59 +02:00
Makefile ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
bmi.c ath10k: improve logging to include dev id 2014-08-26 19:04:48 +03:00
bmi.h ath10k: select board data based on BMI chip id and board id 2015-10-14 08:58:35 +03:00
ce.c ath10k: remove shadow copy of CE descriptors for source ring 2015-10-29 12:59:04 +02:00
ce.h ath10k: remove shadow copy of CE descriptors for source ring 2015-10-29 12:59:04 +02:00
core.c brcfmac 2015-12-08 12:39:15 -05:00
core.h brcfmac 2015-12-08 12:39:15 -05:00
debug.c ath10k: remove unnecessary amsdu/ampdu assignment in debugfs 2015-12-08 16:50:09 +02:00
debug.h ath10k: split driver info messages during device initialisation 2015-11-30 16:54:58 +02:00
debugfs_sta.c ath10k: add support to send delba 2015-01-13 16:13:47 +02:00
hif.h ath10k: remove htc polling for tx completion 2015-10-16 15:49:41 +03:00
htc.c ath10k: remove htc polling for tx completion 2015-10-16 15:49:41 +03:00
htc.h ath10k: remove htc polling for tx completion 2015-10-16 15:49:41 +03:00
htt.c ath10k: enable raw encap mode and software crypto engine 2015-07-29 11:28:24 +03:00
htt.h ath10k: remove txmode from skb_cb 2015-11-23 17:12:22 +02:00
htt_rx.c ath10k: stop abusing GFP_DMA 2015-11-30 16:54:45 +02:00
htt_tx.c ath10k: stop abusing GFP_DMA 2015-11-30 16:54:45 +02:00
hw.c ath10k: add cycle/rx_clear counters frequency to hw_params 2015-08-17 16:46:21 +03:00
hw.h brcfmac 2015-12-08 12:39:15 -05:00
mac.c ath10k: set SM power save disabled to default value 2016-01-07 14:56:23 +02:00
mac.h ath10k: fix the wrong RX rate idx report at 11G mode 2015-11-16 21:48:53 +02:00
p2p.c ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
p2p.h ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
pci.c ath10k: reduce indentation by moving powersave check within function 2015-12-31 15:23:15 +02:00
pci.h ath10k: disable PCI PS for QCA988X and QCA99X0 2015-10-19 17:38:01 +03:00
rx_desc.h ath10k: add support for qca99x0 Rx descriptors 2015-07-24 10:44:55 +03:00
spectral.c ath10k: add spectral scan support for 10.4 fw 2015-08-26 11:09:12 +03:00
spectral.h ath10k: refactor phyerr event handlers 2015-08-17 17:43:29 +03:00
swap.c ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
swap.h ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
targaddrs.h ath10k: add QCA9377 chipset support 2015-10-29 13:02:33 +02:00
testmode.c ath10k: add FW API support to test mode 2015-10-29 12:48:01 +02:00
testmode.h ath10k: add testmode 2014-09-11 23:42:36 +03:00
testmode_i.h ath10k: add testmode 2014-09-11 23:42:36 +03:00
thermal.c ath10k: add thermal throttling support for 10.4 firmware 2015-11-04 19:31:46 +02:00
thermal.h ath10k: configure thermal throttle while powering up 2015-03-23 17:16:37 +02:00
trace.c
trace.h ath10k: add extra check for frame tracing 2015-04-17 09:33:48 +03:00
txrx.c ath10k: fix tx header parsing 2015-11-23 17:12:29 +02:00
txrx.h ath10k: fix Rx aggregation reordering 2014-07-25 11:15:39 +03:00
wmi-ops.h ath10k: enable adaptive CCA 2015-10-28 21:33:03 +02:00
wmi-tlv.c ath10k: add abstraction layer for peer flags 2015-11-04 19:30:08 +02:00
wmi-tlv.h ath10k: add abstraction layer for peer flags 2015-11-04 19:30:08 +02:00
wmi.c ath10k: do not use coherent memory for allocated device memory chunks 2015-12-08 16:50:14 +02:00
wmi.h ath10k: introduce new subtypes for proxy STA and Mesh 2015-11-30 16:54:50 +02:00
wow.c ath10k: fix hw reconfig on wow failure 2015-08-13 14:22:49 +03:00
wow.h ath10k: add WOW patterns support 2015-03-30 09:10:24 +03:00