linux/drivers/usb/dwc2/Kconfig

54 lines
1.9 KiB
Plaintext

config USB_DWC2
tristate "DesignWare USB2 DRD Core Support"
depends on USB
help
Say Y or M here if your system has a Dual Role HighSpeed
USB controller based on the DesignWare HSOTG IP Core.
If you choose to build this driver as dynamically linked
modules, the core module will be called dwc2.ko, the
PCI bus interface module (if you have a PCI bus system)
will be called dwc2_pci.ko and the platform interface module
(for controllers directly connected to the CPU) will be called
dwc2_platform.ko.
NOTE: This driver at present only implements the Host mode
of the controller. The existing s3c-hsotg driver supports
Peripheral mode, but only for the Samsung S3C platforms.
There are plans to merge the s3c-hsotg driver with this
driver in the near future to create a dual-role driver.
if USB_DWC2
config USB_DWC2_DEBUG
bool "Enable Debugging Messages"
help
Say Y here to enable debugging messages in the DWC2 Driver.
config USB_DWC2_VERBOSE
bool "Enable Verbose Debugging Messages"
depends on USB_DWC2_DEBUG
help
Say Y here to enable verbose debugging messages in the DWC2 Driver.
WARNING: Enabling this will quickly fill your message log.
If in doubt, say N.
config USB_DWC2_TRACK_MISSED_SOFS
bool "Enable Missed SOF Tracking"
help
Say Y here to enable logging of missed SOF events to the dmesg log.
WARNING: This feature is still experimental.
If in doubt, say N.
config USB_DWC2_DEBUG_PERIODIC
bool "Enable Debugging Messages For Periodic Transfers"
depends on USB_DWC2_DEBUG || USB_DWC2_VERBOSE
default y
help
Say N here to disable (verbose) debugging messages to be
logged for periodic transfers. This allows better debugging of
non-periodic transfers, but of course the debug logs will be
incomplete. Note that this also disables some debug messages
for which the transfer type cannot be deduced.
endif