Boris BREZILLON 13a6073d4c clk: at91: rework rm9200 USB clock to propagate set_rate to the parent clk ... The RM9200 USB clock is actually connected to a single parent (the PLLB) on which we can apply a specific divider. The USB clock divider does not allow for fine grained control on the USB clock frequency, hence propagating the set_rate request to the parent is the only choice we have to properly configure the USB clock rate. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by: Gaël PORTAY <gael.portay@gmail.com> Tested-by: Gaël PORTAY <gael.portay@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>		2014-09-02 15:37:22 -07:00
..
Makefile	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
clk-main.c	clk: at91: main: warn when the main crystal frequency is not set	2014-07-02 09:00:52 -07:00
clk-master.c	clk:at91: Fix memory leak in of_at91_clk_master_setup()	2014-02-26 18:00:56 -08:00
clk-peripheral.c	clk: at91: add PMC peripheral clocks	2013-12-02 15:31:24 +01:00
clk-pll.c	clk: at91: fix recalc_rate implementation of PLL driver	2014-09-02 15:37:17 -07:00
clk-plldiv.c	clk: at91: add PMC pll clocks	2013-12-02 15:31:22 +01:00
clk-programmable.c	clk: at91: optimization of the set_rate callback	2014-03-19 15:22:02 -07:00
clk-slow.c	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
clk-smd.c	clk: at91: add PMC smd clock	2013-12-02 15:31:25 +01:00
clk-system.c	clk: at91: fix programmable clk irq handling	2014-03-19 15:21:56 -07:00
clk-usb.c	clk: at91: rework rm9200 USB clock to propagate set_rate to the parent clk	2014-09-02 15:37:22 -07:00
clk-utmi.c	clk: at91: add PMC utmi clock	2013-12-02 15:31:25 +01:00
pmc.c	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
pmc.h	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
sckc.c	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00
sckc.h	clk: at91: add slow clks driver	2014-05-07 18:27:45 +02:00