mirror of https://gitee.com/openkylin/linux.git
335 lines
9.3 KiB
C
335 lines
9.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (C) 2020 ROHM Semiconductors
|
|
// ROHM BD9576MUF/BD9573MUF regulator driver
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/rohm-bd957x.h>
|
|
#include <linux/mfd/rohm-generic.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define BD957X_VOUTS1_VOLT 3300000
|
|
#define BD957X_VOUTS4_BASE_VOLT 1030000
|
|
#define BD957X_VOUTS34_NUM_VOLT 32
|
|
|
|
static int vout1_volt_table[] = {5000000, 4900000, 4800000, 4700000, 4600000,
|
|
4500000, 4500000, 4500000, 5000000, 5100000,
|
|
5200000, 5300000, 5400000, 5500000, 5500000,
|
|
5500000};
|
|
|
|
static int vout2_volt_table[] = {1800000, 1780000, 1760000, 1740000, 1720000,
|
|
1700000, 1680000, 1660000, 1800000, 1820000,
|
|
1840000, 1860000, 1880000, 1900000, 1920000,
|
|
1940000};
|
|
|
|
static int voutl1_volt_table[] = {2500000, 2540000, 2580000, 2620000, 2660000,
|
|
2700000, 2740000, 2780000, 2500000, 2460000,
|
|
2420000, 2380000, 2340000, 2300000, 2260000,
|
|
2220000};
|
|
|
|
struct bd957x_regulator_data {
|
|
struct regulator_desc desc;
|
|
int base_voltage;
|
|
};
|
|
|
|
static int bd957x_vout34_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
int multiplier = selector & desc->vsel_mask & 0x7f;
|
|
int tune;
|
|
|
|
/* VOUT3 and 4 has 10mV step */
|
|
tune = multiplier * 10000;
|
|
|
|
if (!(selector & 0x80))
|
|
return desc->fixed_uV - tune;
|
|
|
|
return desc->fixed_uV + tune;
|
|
}
|
|
|
|
static int bd957x_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
int index = selector & desc->vsel_mask & 0x7f;
|
|
|
|
if (!(selector & 0x80))
|
|
index += desc->n_voltages/2;
|
|
|
|
if (index >= desc->n_voltages)
|
|
return -EINVAL;
|
|
|
|
return desc->volt_table[index];
|
|
}
|
|
|
|
static const struct regulator_ops bd957x_vout34_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = bd957x_vout34_list_voltage,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops bd957X_vouts1_regulator_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops bd957x_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = bd957x_list_voltage,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
};
|
|
|
|
static struct bd957x_regulator_data bd9576_regulators[] = {
|
|
{
|
|
.desc = {
|
|
.name = "VD50",
|
|
.of_match = of_match_ptr("regulator-vd50"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VD50,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.ops = &bd957x_ops,
|
|
.volt_table = &vout1_volt_table[0],
|
|
.n_voltages = ARRAY_SIZE(vout1_volt_table),
|
|
.vsel_reg = BD957X_REG_VOUT1_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUT1_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGER1,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VD18",
|
|
.of_match = of_match_ptr("regulator-vd18"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VD18,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.ops = &bd957x_ops,
|
|
.volt_table = &vout2_volt_table[0],
|
|
.n_voltages = ARRAY_SIZE(vout2_volt_table),
|
|
.vsel_reg = BD957X_REG_VOUT2_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUT2_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGER2,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VDDDR",
|
|
.of_match = of_match_ptr("regulator-vdddr"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VDDDR,
|
|
.ops = &bd957x_vout34_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = BD957X_VOUTS34_NUM_VOLT,
|
|
.vsel_reg = BD957X_REG_VOUT3_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUT3_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGER3,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VD10",
|
|
.of_match = of_match_ptr("regulator-vd10"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VD10,
|
|
.ops = &bd957x_vout34_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.fixed_uV = BD957X_VOUTS4_BASE_VOLT,
|
|
.n_voltages = BD957X_VOUTS34_NUM_VOLT,
|
|
.vsel_reg = BD957X_REG_VOUT4_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUT4_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGER4,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VOUTL1",
|
|
.of_match = of_match_ptr("regulator-voutl1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VOUTL1,
|
|
.ops = &bd957x_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.volt_table = &voutl1_volt_table[0],
|
|
.n_voltages = ARRAY_SIZE(voutl1_volt_table),
|
|
.vsel_reg = BD957X_REG_VOUTL1_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUTL1_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGERL1,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VOUTS1",
|
|
.of_match = of_match_ptr("regulator-vouts1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VOUTS1,
|
|
.ops = &bd957X_vouts1_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 1,
|
|
.fixed_uV = BD957X_VOUTS1_VOLT,
|
|
.enable_reg = BD957X_REG_POW_TRIGGERS1,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
},
|
|
};
|
|
|
|
static int bd957x_probe(struct platform_device *pdev)
|
|
{
|
|
struct regmap *regmap;
|
|
struct regulator_config config = { 0 };
|
|
int i;
|
|
bool vout_mode, ddr_sel;
|
|
const struct bd957x_regulator_data *reg_data = &bd9576_regulators[0];
|
|
unsigned int num_reg_data = ARRAY_SIZE(bd9576_regulators);
|
|
enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
|
|
|
|
regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!regmap) {
|
|
dev_err(&pdev->dev, "No regmap\n");
|
|
return -EINVAL;
|
|
}
|
|
vout_mode = of_property_read_bool(pdev->dev.parent->of_node,
|
|
"rohm,vout1-en-low");
|
|
if (vout_mode) {
|
|
struct gpio_desc *en;
|
|
|
|
dev_dbg(&pdev->dev, "GPIO controlled mode\n");
|
|
|
|
/* VOUT1 enable state judged by VOUT1_EN pin */
|
|
/* See if we have GPIO defined */
|
|
en = devm_gpiod_get_from_of_node(&pdev->dev,
|
|
pdev->dev.parent->of_node,
|
|
"rohm,vout1-en-gpios", 0,
|
|
GPIOD_OUT_LOW, "vout1-en");
|
|
if (!IS_ERR(en)) {
|
|
/* VOUT1_OPS gpio ctrl */
|
|
/*
|
|
* Regulator core prioritizes the ena_gpio over
|
|
* enable/disable/is_enabled callbacks so no need to
|
|
* clear them. We can still use same ops
|
|
*/
|
|
config.ena_gpiod = en;
|
|
} else {
|
|
/*
|
|
* In theory it is possible someone wants to set
|
|
* vout1-en LOW during OTP loading and set VOUT1 to be
|
|
* controlled by GPIO - but control the GPIO from some
|
|
* where else than this driver. For that to work we
|
|
* should unset the is_enabled callback here.
|
|
*
|
|
* I believe such case where rohm,vout1-en-low is set
|
|
* and vout1-en-gpios is not is likely to be a
|
|
* misconfiguration. So let's just err out for now.
|
|
*/
|
|
dev_err(&pdev->dev,
|
|
"Failed to get VOUT1 control GPIO\n");
|
|
return PTR_ERR(en);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If more than one PMIC needs to be controlled by same processor then
|
|
* allocate the regulator data array here and use bd9576_regulators as
|
|
* template. At the moment I see no such use-case so I spare some
|
|
* bytes and use bd9576_regulators directly for non-constant configs
|
|
* like DDR voltage selection.
|
|
*/
|
|
ddr_sel = of_property_read_bool(pdev->dev.parent->of_node,
|
|
"rohm,ddr-sel-low");
|
|
if (ddr_sel)
|
|
bd9576_regulators[2].desc.fixed_uV = 1350000;
|
|
else
|
|
bd9576_regulators[2].desc.fixed_uV = 1500000;
|
|
|
|
switch (chip) {
|
|
case ROHM_CHIP_TYPE_BD9576:
|
|
dev_dbg(&pdev->dev, "Found BD9576MUF\n");
|
|
break;
|
|
case ROHM_CHIP_TYPE_BD9573:
|
|
dev_dbg(&pdev->dev, "Found BD9573MUF\n");
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Unsupported chip type\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
config.dev = pdev->dev.parent;
|
|
config.regmap = regmap;
|
|
|
|
for (i = 0; i < num_reg_data; i++) {
|
|
|
|
const struct regulator_desc *desc;
|
|
struct regulator_dev *rdev;
|
|
const struct bd957x_regulator_data *r;
|
|
|
|
r = ®_data[i];
|
|
desc = &r->desc;
|
|
|
|
rdev = devm_regulator_register(&pdev->dev, desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev,
|
|
"failed to register %s regulator\n",
|
|
desc->name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
/*
|
|
* Clear the VOUT1 GPIO setting - rest of the regulators do not
|
|
* support GPIO control
|
|
*/
|
|
config.ena_gpiod = NULL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id bd957x_pmic_id[] = {
|
|
{ "bd9573-pmic", ROHM_CHIP_TYPE_BD9573 },
|
|
{ "bd9576-pmic", ROHM_CHIP_TYPE_BD9576 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, bd957x_pmic_id);
|
|
|
|
static struct platform_driver bd957x_regulator = {
|
|
.driver = {
|
|
.name = "bd957x-pmic",
|
|
},
|
|
.probe = bd957x_probe,
|
|
.id_table = bd957x_pmic_id,
|
|
};
|
|
|
|
module_platform_driver(bd957x_regulator);
|
|
|
|
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
|
|
MODULE_DESCRIPTION("ROHM BD9576/BD9573 voltage regulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:bd957x-pmic");
|