mirror of https://gitee.com/openkylin/linux.git
581 lines
12 KiB
Plaintext
581 lines
12 KiB
Plaintext
/*
|
|
* Hardkernel Odroid XU board device tree source
|
|
*
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
* Copyright (c) 2016 Krzysztof Kozlowski
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos5410.dtsi"
|
|
#include <dt-bindings/clock/maxim,max77802.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include "exynos54xx-odroidxu-leds.dtsi"
|
|
|
|
/ {
|
|
model = "Hardkernel Odroid XU";
|
|
compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
|
|
|
|
memory {
|
|
reg = <0x40000000 0x7ea00000>;
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = &serial_2;
|
|
};
|
|
|
|
emmc_pwrseq: pwrseq {
|
|
pinctrl-0 = <&emmc_nrst_pin>;
|
|
pinctrl-names = "default";
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
fan0: pwm-fan {
|
|
compatible = "pwm-fan";
|
|
pwms = <&pwm 0 20972 0>;
|
|
cooling-min-state = <0>;
|
|
cooling-max-state = <3>;
|
|
#cooling-cells = <2>;
|
|
cooling-levels = <0 130 170 230>;
|
|
};
|
|
|
|
fin_pll: xxti {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "fin_pll";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
firmware@02073000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x02073000 0x1000>;
|
|
};
|
|
};
|
|
|
|
&cpu0_thermal {
|
|
thermal-sensors = <&tmu_cpu0 0>;
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
|
|
trips {
|
|
cpu_alert0: cpu-alert-0 {
|
|
temperature = <50000>; /* millicelsius */
|
|
hysteresis = <5000>; /* millicelsius */
|
|
type = "active";
|
|
};
|
|
cpu_alert1: cpu-alert-1 {
|
|
temperature = <60000>; /* millicelsius */
|
|
hysteresis = <5000>; /* millicelsius */
|
|
type = "active";
|
|
};
|
|
cpu_alert2: cpu-alert-2 {
|
|
temperature = <70000>; /* millicelsius */
|
|
hysteresis = <5000>; /* millicelsius */
|
|
type = "active";
|
|
};
|
|
cpu_crit0: cpu-crit-0 {
|
|
temperature = <120000>; /* millicelsius */
|
|
hysteresis = <0>; /* millicelsius */
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_alert0>;
|
|
cooling-device = <&fan0 0 1>;
|
|
};
|
|
map1 {
|
|
trip = <&cpu_alert1>;
|
|
cooling-device = <&fan0 1 2>;
|
|
};
|
|
map2 {
|
|
trip = <&cpu_alert2>;
|
|
cooling-device = <&fan0 2 3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsi2c_4 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <400000>;
|
|
status = "okay";
|
|
|
|
usb3503: usb-hub@08 {
|
|
compatible = "smsc,usb3503";
|
|
reg = <0x08>;
|
|
|
|
intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
|
|
connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>;
|
|
initial-mode = <1>;
|
|
|
|
clock-names = "refclk";
|
|
clocks = <&pmu_system_controller 0>;
|
|
refclk-frequency = <24000000>;
|
|
};
|
|
|
|
max77802: pmic@09 {
|
|
compatible = "maxim,max77802";
|
|
reg = <0x9>;
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <4 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
|
|
<&pmic_dvs_3>;
|
|
#clock-cells = <1>;
|
|
|
|
inl1-supply = <&buck5_reg>;
|
|
inl2-supply = <&buck7_reg>;
|
|
inl3-supply = <&buck9_reg>;
|
|
inl4-supply = <&buck9_reg>;
|
|
inl5-supply = <&buck9_reg>;
|
|
inl6-supply = <&buck10_reg>;
|
|
inl7-supply = <&buck9_reg>;
|
|
/* inl9 supply is BOOST, not configured here */
|
|
inl10-supply = <&buck7_reg>;
|
|
|
|
regulators {
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "vdd_mem";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "vdd_kfc";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "buck7";
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
/* vdd_mmc0 */
|
|
regulator-name = "vddf_2v85";
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "buck9";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck10_reg: BUCK10 {
|
|
regulator-name = "buck10";
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "vdd_alive";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "vddq_m1_m2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "vddq_gpio";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "vddq_mmc2";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
/* Having it off prevents reboot */
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "vdd18_hsic";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "vdd18_bpll";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "vddq_lcd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "vdd10_hdmi";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "ldo9";
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "vdd18_mipi";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "vddq_mmc01";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
/*
|
|
* Having it off prevents accessing MMC after
|
|
* reboot with error:
|
|
* MMC Device 1: Clock OFF has been failed.
|
|
*/
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "vdd33_usb3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "vddq_abbg0";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "vddq_abbg1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "vdd10_usb3";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "ldo16";
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "cam_sensor_core";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
ldo18_reg: LDO18 {
|
|
regulator-name = "ldo18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "ldo19";
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "vdd_mmc0";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
/* vdd_mmc2 */
|
|
regulator-name = "vddf_2v8";
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
ldo22_reg: LDO22 {
|
|
regulator-name = "ldo22";
|
|
};
|
|
|
|
ldo23_reg: LDO23 {
|
|
regulator-name = "dp_p3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "cam_af";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "eth_p3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "usb30_extclk";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo27_reg: LDO27 {
|
|
regulator-name = "ldo27";
|
|
};
|
|
|
|
ldo28_reg: LDO28 {
|
|
regulator-name = "ldo28";
|
|
};
|
|
|
|
ldo29_reg: LDO29 {
|
|
regulator-name = "ldo29";
|
|
};
|
|
|
|
ldo30_reg: LDO30 {
|
|
regulator-name = "vddq_e1_e2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo31_reg: LDO31 {
|
|
regulator-name = "ldo31";
|
|
};
|
|
|
|
/* On revisions with ti,ina231 this is sensor VS */
|
|
ldo32_reg: LDO32 {
|
|
regulator-name = "vs_power_meter";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo33_reg: LDO33 {
|
|
regulator-name = "ldo33";
|
|
};
|
|
|
|
ldo34_reg: LDO34 {
|
|
regulator-name = "ldo34";
|
|
};
|
|
|
|
ldo35_reg: LDO35 {
|
|
regulator-name = "ldo35";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mmc_0 {
|
|
status = "okay";
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
samsung,dw-mshc-hs400-timing = <0 2>;
|
|
samsung,read-strobe-delay = <90>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
vmmc-supply = <&ldo20_reg>;
|
|
vqmmc-supply = <&ldo11_reg>;
|
|
};
|
|
|
|
&mmc_2 {
|
|
status = "okay";
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
vmmc-supply = <&ldo21_reg>;
|
|
vqmmc-supply = <&ldo4_reg>;
|
|
};
|
|
|
|
&pinctrl_0 {
|
|
emmc_nrst_pin: emmc-nrst {
|
|
samsung,pins = "gpd1-0";
|
|
samsung,pin-function = <2>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
pmic_dvs_3: pmic-dvs-3 {
|
|
samsung,pins = "gpx0-0";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
pmic_dvs_2: pmic-dvs-2 {
|
|
samsung,pins = "gpx0-1";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
pmic_dvs_1: pmic-dvs-1 {
|
|
samsung,pins = "gpx0-2";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
samsung,pin-val = <1>;
|
|
};
|
|
|
|
max77802_irq: max77802-irq {
|
|
samsung,pins = "gpx0-4";
|
|
samsung,pin-function = <0xf>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
/*
|
|
* PWM 0 -- fan
|
|
* PWM 1 -- Green LED
|
|
* PWM 2 -- Blue LED
|
|
* PWM 3 -- on MIPI connector for backlight
|
|
*/
|
|
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&serial_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu_cpu0 {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
};
|
|
|
|
&tmu_cpu1 {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
};
|
|
|
|
&tmu_cpu2 {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
};
|
|
|
|
&tmu_cpu3 {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
vdd33-supply = <&ldo12_reg>;
|
|
vdd10-supply = <&ldo15_reg>;
|
|
};
|
|
|
|
&usbdrd3_1 {
|
|
vdd33-supply = <&ldo12_reg>;
|
|
vdd10-supply = <&ldo15_reg>;
|
|
};
|