linux/arch/blackfin/mach-bf561/secondary.S

234 lines
3.9 KiB
ArmAsm

/*
* BF561 coreB bootstrap file
*
* Copyright 2007-2009 Analog Devices Inc.
* Philippe Gerum <rpm@xenomai.org>
*
* Licensed under the GPL-2 or later.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
#include <asm/asm-offsets.h>
#include <asm/trace.h>
__INIT
/* Lay the initial stack into the L1 scratch area of Core B */
#define INITIAL_STACK (COREB_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
ENTRY(_coreb_trampoline_start)
/* Set the SYSCFG register */
R0 = 0x36;
SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
R0 = 0;
/*Clear Out All the data and pointer Registers*/
R1 = R0;
R2 = R0;
R3 = R0;
R4 = R0;
R5 = R0;
R6 = R0;
R7 = R0;
P0 = R0;
P1 = R0;
P2 = R0;
P3 = R0;
P4 = R0;
P5 = R0;
LC0 = r0;
LC1 = r0;
L0 = r0;
L1 = r0;
L2 = r0;
L3 = r0;
/* Clear Out All the DAG Registers*/
B0 = r0;
B1 = r0;
B2 = r0;
B3 = r0;
I0 = r0;
I1 = r0;
I2 = r0;
I3 = r0;
M0 = r0;
M1 = r0;
M2 = r0;
M3 = r0;
trace_buffer_init(p0,r0);
/* Turn off the icache */
p0.l = LO(IMEM_CONTROL);
p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
/* Disabling of CPLBs should be proceeded by a CSYNC */
CSYNC;
[p0] = R0;
SSYNC;
/* Turn off the dcache */
p0.l = LO(DMEM_CONTROL);
p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
/* Disabling of CPLBs should be proceeded by a CSYNC */
CSYNC;
[p0] = R0;
SSYNC;
/* in case of double faults, save a few things */
p0.l = _init_retx_coreb;
p0.h = _init_retx_coreb;
R0 = RETX;
[P0] = R0;
#ifdef CONFIG_DEBUG_DOUBLEFAULT
/* Only save these if we are storing them,
* This happens here, since L1 gets clobbered
* below
*/
GET_PDA(p0, r0);
r7 = [p0 + PDA_DF_RETX];
p1.l = _init_saved_retx_coreb;
p1.h = _init_saved_retx_coreb;
[p1] = r7;
r7 = [p0 + PDA_DF_DCPLB];
p1.l = _init_saved_dcplb_fault_addr_coreb;
p1.h = _init_saved_dcplb_fault_addr_coreb;
[p1] = r7;
r7 = [p0 + PDA_DF_ICPLB];
p1.l = _init_saved_icplb_fault_addr_coreb;
p1.h = _init_saved_icplb_fault_addr_coreb;
[p1] = r7;
r7 = [p0 + PDA_DF_SEQSTAT];
p1.l = _init_saved_seqstat_coreb;
p1.h = _init_saved_seqstat_coreb;
[p1] = r7;
#endif
/* Initialize stack pointer */
sp.l = lo(INITIAL_STACK);
sp.h = hi(INITIAL_STACK);
fp = sp;
usp = sp;
/* This section keeps the processor in supervisor mode
* during core B startup. Branches to the idle task.
*/
/* EVT15 = _real_start */
p0.l = lo(EVT15);
p0.h = hi(EVT15);
p1.l = _coreb_start;
p1.h = _coreb_start;
[p0] = p1;
csync;
p0.l = lo(IMASK);
p0.h = hi(IMASK);
p1.l = IMASK_IVG15;
p1.h = 0x0;
[p0] = p1;
csync;
raise 15;
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
#if defined(ANOMALY_05000281)
nop; nop; nop;
#endif
rti;
.LWAIT_HERE:
jump .LWAIT_HERE;
ENDPROC(_coreb_trampoline_start)
ENTRY(_coreb_trampoline_end)
.section ".text"
ENTRY(_set_sicb_iwr)
P0.H = hi(SICB_IWR0);
P0.L = lo(SICB_IWR0);
P1.H = hi(SICB_IWR1);
P1.L = lo(SICB_IWR1);
[P0] = R0;
[P1] = R1;
SSYNC;
RTS;
ENDPROC(_set_sicb_iwr)
ENTRY(_coreb_sleep)
sp.l = lo(INITIAL_STACK);
sp.h = hi(INITIAL_STACK);
fp = sp;
usp = sp;
call _set_sicb_iwr;
CLI R2;
SSYNC;
IDLE;
STI R2;
R0 = IWR_DISABLE_ALL;
R1 = IWR_DISABLE_ALL;
call _set_sicb_iwr;
p0.h = hi(COREB_L1_CODE_START);
p0.l = lo(COREB_L1_CODE_START);
jump (p0);
ENDPROC(_coreb_sleep)
__CPUINIT
ENTRY(_coreb_start)
[--sp] = reti;
p0.l = lo(WDOGB_CTL);
p0.h = hi(WDOGB_CTL);
r0 = 0xAD6(z);
w[p0] = r0; /* Clear the watchdog. */
ssync;
/*
* switch to IDLE stack.
*/
p0.l = _secondary_stack;
p0.h = _secondary_stack;
sp = [p0];
usp = sp;
fp = sp;
#ifdef CONFIG_HOTPLUG_CPU
p0.l = _hotplug_coreb;
p0.h = _hotplug_coreb;
r0 = [p0];
cc = BITTST(r0, 0);
if cc jump 3f;
#endif
sp += -12;
call _init_pda
sp += 12;
#ifdef CONFIG_HOTPLUG_CPU
3:
#endif
call _secondary_start_kernel;
.L_exit:
jump.s .L_exit;
ENDPROC(_coreb_start)