mirror of https://gitee.com/openkylin/linux.git
43 lines
1.3 KiB
Plaintext
43 lines
1.3 KiB
Plaintext
Amlogic Meson GX DWC3 USB SoC controller
|
|
|
|
Required properties:
|
|
- compatible: depending on the SoC this should contain one of:
|
|
* amlogic,meson-axg-dwc3
|
|
* amlogic,meson-gxl-dwc3
|
|
- clocks: a handle for the "USB general" clock
|
|
- clock-names: must be "usb_general"
|
|
- resets: a handle for the shared "USB OTG" reset line
|
|
- reset-names: must be "usb_otg"
|
|
|
|
Required child node:
|
|
A child node must exist to represent the core DWC3 IP block. The name of
|
|
the node is not important. The content of the node is defined in dwc3.txt.
|
|
|
|
PHY documentation is provided in the following places:
|
|
- Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt
|
|
- Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt
|
|
|
|
Example device nodes:
|
|
usb0: usb@ff500000 {
|
|
compatible = "amlogic,meson-axg-dwc3";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
clocks = <&clkc CLKID_USB>;
|
|
clock-names = "usb_general";
|
|
resets = <&reset RESET_USB_OTG>;
|
|
reset-names = "usb_otg";
|
|
|
|
dwc3: dwc3@ff500000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0 0xff500000 0x0 0x100000>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
maximum-speed = "high-speed";
|
|
snps,dis_u2_susphy_quirk;
|
|
phys = <&usb3_phy>, <&usb2_phy0>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
};
|
|
};
|