mirror of https://gitee.com/openkylin/linux.git
129 lines
5.2 KiB
Plaintext
129 lines
5.2 KiB
Plaintext
NVIDIA Tegra xHCI controller
|
|
============================
|
|
|
|
The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by
|
|
the Tegra XUSB pad controller.
|
|
|
|
Required properties:
|
|
--------------------
|
|
- compatible: Must be:
|
|
- Tegra124: "nvidia,tegra124-xusb"
|
|
- Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
|
|
- Tegra210: "nvidia,tegra210-xusb"
|
|
- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
|
|
registers and XUSB IPFS registers.
|
|
- reg-names: Must contain the following entries:
|
|
- "hcd"
|
|
- "fpci"
|
|
- "ipfs"
|
|
- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt.
|
|
- clocks: Must contain an entry for each entry in clock-names.
|
|
See ../clock/clock-bindings.txt for details.
|
|
- clock-names: Must include the following entries:
|
|
- xusb_host
|
|
- xusb_host_src
|
|
- xusb_falcon_src
|
|
- xusb_ss
|
|
- xusb_ss_src
|
|
- xusb_ss_div2
|
|
- xusb_hs_src
|
|
- xusb_fs_src
|
|
- pll_u_480m
|
|
- clk_m
|
|
- pll_e
|
|
- resets: Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names: Must include the following entries:
|
|
- xusb_host
|
|
- xusb_ss
|
|
- xusb_src
|
|
Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src.
|
|
- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to
|
|
configure the USB pads used by the XHCI controller
|
|
|
|
For Tegra124 and Tegra132:
|
|
- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
|
|
- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
|
|
- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
|
|
- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
|
|
- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
|
|
- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
|
|
- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
|
|
- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V.
|
|
|
|
For Tegra210:
|
|
- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
|
|
- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
|
|
- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
|
|
- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
|
|
- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
|
|
- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
|
|
- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
|
|
- power-domains: A list of PM domain specifiers that reference each power-domain
|
|
used by the xHCI controller. This list must comprise of a specifier for the
|
|
XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
|
|
../arm/tegra/nvidia,tegra20-pmc.txt for details.
|
|
- power-domain-names: A list of names that represent each of the specifiers in
|
|
the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
|
|
represent the power-domains XUSBA and XUSBC, respectively. See
|
|
../power/power_domain.txt for details.
|
|
|
|
Optional properties:
|
|
--------------------
|
|
- phys: Must contain an entry for each entry in phy-names.
|
|
See ../phy/phy-bindings.txt for details.
|
|
- phy-names: Should include an entry for each PHY used by the controller. The
|
|
following PHYs are available:
|
|
- Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
|
|
- Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
|
|
- Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
|
|
usb3-3
|
|
|
|
Example:
|
|
--------
|
|
|
|
usb@0,70090000 {
|
|
compatible = "nvidia,tegra124-xusb";
|
|
reg = <0x0 0x70090000 0x0 0x8000>,
|
|
<0x0 0x70098000 0x0 0x1000>,
|
|
<0x0 0x70099000 0x0 0x1000>;
|
|
reg-names = "hcd", "fpci", "ipfs";
|
|
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
|
|
<&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
|
|
<&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
|
|
<&tegra_car TEGRA124_CLK_XUSB_SS>,
|
|
<&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
|
|
<&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
|
|
<&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
|
|
<&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
|
|
<&tegra_car TEGRA124_CLK_PLL_U_480M>,
|
|
<&tegra_car TEGRA124_CLK_CLK_M>,
|
|
<&tegra_car TEGRA124_CLK_PLL_E>;
|
|
clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
|
|
"xusb_ss", "xusb_ss_div2", "xusb_ss_src",
|
|
"xusb_hs_src", "xusb_fs_src", "pll_u_480m",
|
|
"clk_m", "pll_e";
|
|
resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
|
|
reset-names = "xusb_host", "xusb_ss", "xusb_src";
|
|
|
|
nvidia,xusb-padctl = <&padctl>;
|
|
|
|
phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */
|
|
<&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */
|
|
<&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */
|
|
phy-names = "usb2-1", "usb2-2", "usb3-0";
|
|
|
|
avddio-pex-supply = <&vdd_1v05_run>;
|
|
dvddio-pex-supply = <&vdd_1v05_run>;
|
|
avdd-usb-supply = <&vdd_3v3_lp0>;
|
|
avdd-pll-utmip-supply = <&vddio_1v8>;
|
|
avdd-pll-erefe-supply = <&avdd_1v05_run>;
|
|
avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
|
|
hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
|
|
hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
|
|
};
|