mirror of https://gitee.com/openkylin/linux.git
1698 lines
40 KiB
C
1698 lines
40 KiB
C
/*
|
|
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
|
|
* Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
|
|
*/
|
|
|
|
/*
|
|
* Mostly written by Mark Lord <mlord@pobox.com>
|
|
* and Gadi Oxman <gadio@netvision.net.il>
|
|
* and Andre Hedrick <andre@linux-ide.org>
|
|
*
|
|
* See linux/MAINTAINERS for address of current maintainer.
|
|
*
|
|
* This is the IDE probe module, as evolved from hd.c and ide.c.
|
|
*
|
|
* -- increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot
|
|
* by Andrea Arcangeli
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/major.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
|
|
/**
|
|
* generic_id - add a generic drive id
|
|
* @drive: drive to make an ID block for
|
|
*
|
|
* Add a fake id field to the drive we are passed. This allows
|
|
* use to skip a ton of NULL checks (which people always miss)
|
|
* and make drive properties unconditional outside of this file
|
|
*/
|
|
|
|
static void generic_id(ide_drive_t *drive)
|
|
{
|
|
drive->id->cyls = drive->cyl;
|
|
drive->id->heads = drive->head;
|
|
drive->id->sectors = drive->sect;
|
|
drive->id->cur_cyls = drive->cyl;
|
|
drive->id->cur_heads = drive->head;
|
|
drive->id->cur_sectors = drive->sect;
|
|
}
|
|
|
|
static void ide_disk_init_chs(ide_drive_t *drive)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
/* Extract geometry if we did not already have one for the drive */
|
|
if (!drive->cyl || !drive->head || !drive->sect) {
|
|
drive->cyl = drive->bios_cyl = id->cyls;
|
|
drive->head = drive->bios_head = id->heads;
|
|
drive->sect = drive->bios_sect = id->sectors;
|
|
}
|
|
|
|
/* Handle logical geometry translation by the drive */
|
|
if ((id->field_valid & 1) && id->cur_cyls &&
|
|
id->cur_heads && (id->cur_heads <= 16) && id->cur_sectors) {
|
|
drive->cyl = id->cur_cyls;
|
|
drive->head = id->cur_heads;
|
|
drive->sect = id->cur_sectors;
|
|
}
|
|
|
|
/* Use physical geometry if what we have still makes no sense */
|
|
if (drive->head > 16 && id->heads && id->heads <= 16) {
|
|
drive->cyl = id->cyls;
|
|
drive->head = id->heads;
|
|
drive->sect = id->sectors;
|
|
}
|
|
}
|
|
|
|
static void ide_disk_init_mult_count(ide_drive_t *drive)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
drive->mult_count = 0;
|
|
if (id->max_multsect) {
|
|
#ifdef CONFIG_IDEDISK_MULTI_MODE
|
|
id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0;
|
|
id->multsect_valid = id->multsect ? 1 : 0;
|
|
drive->mult_req = id->multsect_valid ? id->max_multsect : 0;
|
|
drive->special.b.set_multmode = drive->mult_req ? 1 : 0;
|
|
#else /* original, pre IDE-NFG, per request of AC */
|
|
drive->mult_req = 0;
|
|
if (drive->mult_req > id->max_multsect)
|
|
drive->mult_req = id->max_multsect;
|
|
if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect))
|
|
drive->special.b.set_multmode = 1;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/**
|
|
* do_identify - identify a drive
|
|
* @drive: drive to identify
|
|
* @cmd: command used
|
|
*
|
|
* Called when we have issued a drive identify command to
|
|
* read and parse the results. This function is run with
|
|
* interrupts disabled.
|
|
*/
|
|
|
|
static inline void do_identify (ide_drive_t *drive, u8 cmd)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
int bswap = 1;
|
|
struct hd_driveid *id;
|
|
|
|
id = drive->id;
|
|
/* read 512 bytes of id info */
|
|
hwif->input_data(drive, NULL, id, SECTOR_SIZE);
|
|
|
|
drive->id_read = 1;
|
|
local_irq_enable();
|
|
#ifdef DEBUG
|
|
printk(KERN_INFO "%s: dumping identify data\n", drive->name);
|
|
ide_dump_identify((u8 *)id);
|
|
#endif
|
|
ide_fix_driveid(id);
|
|
|
|
#if defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA)
|
|
/*
|
|
* EATA SCSI controllers do a hardware ATA emulation:
|
|
* Ignore them if there is a driver for them available.
|
|
*/
|
|
if ((id->model[0] == 'P' && id->model[1] == 'M') ||
|
|
(id->model[0] == 'S' && id->model[1] == 'K')) {
|
|
printk("%s: EATA SCSI HBA %.10s\n", drive->name, id->model);
|
|
goto err_misc;
|
|
}
|
|
#endif /* CONFIG_SCSI_EATA || CONFIG_SCSI_EATA_PIO */
|
|
|
|
/*
|
|
* WIN_IDENTIFY returns little-endian info,
|
|
* WIN_PIDENTIFY *usually* returns little-endian info.
|
|
*/
|
|
if (cmd == WIN_PIDENTIFY) {
|
|
if ((id->model[0] == 'N' && id->model[1] == 'E') /* NEC */
|
|
|| (id->model[0] == 'F' && id->model[1] == 'X') /* Mitsumi */
|
|
|| (id->model[0] == 'P' && id->model[1] == 'i'))/* Pioneer */
|
|
/* Vertos drives may still be weird */
|
|
bswap ^= 1;
|
|
}
|
|
ide_fixstring(id->model, sizeof(id->model), bswap);
|
|
ide_fixstring(id->fw_rev, sizeof(id->fw_rev), bswap);
|
|
ide_fixstring(id->serial_no, sizeof(id->serial_no), bswap);
|
|
|
|
/* we depend on this a lot! */
|
|
id->model[sizeof(id->model)-1] = '\0';
|
|
|
|
if (strstr(id->model, "E X A B Y T E N E S T"))
|
|
goto err_misc;
|
|
|
|
printk("%s: %s, ", drive->name, id->model);
|
|
drive->present = 1;
|
|
drive->dead = 0;
|
|
|
|
/*
|
|
* Check for an ATAPI device
|
|
*/
|
|
if (cmd == WIN_PIDENTIFY) {
|
|
u8 type = (id->config >> 8) & 0x1f;
|
|
printk("ATAPI ");
|
|
switch (type) {
|
|
case ide_floppy:
|
|
if (!strstr(id->model, "CD-ROM")) {
|
|
if (!strstr(id->model, "oppy") &&
|
|
!strstr(id->model, "poyp") &&
|
|
!strstr(id->model, "ZIP"))
|
|
printk("cdrom or floppy?, assuming ");
|
|
if (drive->media != ide_cdrom) {
|
|
printk ("FLOPPY");
|
|
drive->removable = 1;
|
|
break;
|
|
}
|
|
}
|
|
/* Early cdrom models used zero */
|
|
type = ide_cdrom;
|
|
case ide_cdrom:
|
|
drive->removable = 1;
|
|
#ifdef CONFIG_PPC
|
|
/* kludge for Apple PowerBook internal zip */
|
|
if (!strstr(id->model, "CD-ROM") &&
|
|
strstr(id->model, "ZIP")) {
|
|
printk ("FLOPPY");
|
|
type = ide_floppy;
|
|
break;
|
|
}
|
|
#endif
|
|
printk ("CD/DVD-ROM");
|
|
break;
|
|
case ide_tape:
|
|
printk ("TAPE");
|
|
break;
|
|
case ide_optical:
|
|
printk ("OPTICAL");
|
|
drive->removable = 1;
|
|
break;
|
|
default:
|
|
printk("UNKNOWN (type %d)", type);
|
|
break;
|
|
}
|
|
printk (" drive\n");
|
|
drive->media = type;
|
|
/* an ATAPI device ignores DRDY */
|
|
drive->ready_stat = 0;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Not an ATAPI device: looks like a "regular" hard disk
|
|
*/
|
|
|
|
/*
|
|
* 0x848a = CompactFlash device
|
|
* These are *not* removable in Linux definition of the term
|
|
*/
|
|
|
|
if ((id->config != 0x848a) && (id->config & (1<<7)))
|
|
drive->removable = 1;
|
|
|
|
drive->media = ide_disk;
|
|
printk("%s DISK drive\n", (id->config == 0x848a) ? "CFA" : "ATA" );
|
|
|
|
return;
|
|
|
|
err_misc:
|
|
kfree(id);
|
|
drive->present = 0;
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* actual_try_to_identify - send ata/atapi identify
|
|
* @drive: drive to identify
|
|
* @cmd: command to use
|
|
*
|
|
* try_to_identify() sends an ATA(PI) IDENTIFY request to a drive
|
|
* and waits for a response. It also monitors irqs while this is
|
|
* happening, in hope of automatically determining which one is
|
|
* being used by the interface.
|
|
*
|
|
* Returns: 0 device was identified
|
|
* 1 device timed-out (no response to identify request)
|
|
* 2 device aborted the command (refused to identify itself)
|
|
*/
|
|
|
|
static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct ide_io_ports *io_ports = &hwif->io_ports;
|
|
int use_altstatus = 0, rc;
|
|
unsigned long timeout;
|
|
u8 s = 0, a = 0;
|
|
|
|
/* take a deep breath */
|
|
msleep(50);
|
|
|
|
if (io_ports->ctl_addr) {
|
|
a = ide_read_altstatus(drive);
|
|
s = ide_read_status(drive);
|
|
if ((a ^ s) & ~INDEX_STAT)
|
|
/* ancient Seagate drives, broken interfaces */
|
|
printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
|
|
"instead of ALTSTATUS(0x%02x)\n",
|
|
drive->name, s, a);
|
|
else
|
|
/* use non-intrusive polling */
|
|
use_altstatus = 1;
|
|
}
|
|
|
|
/* set features register for atapi
|
|
* identify command to be sure of reply
|
|
*/
|
|
if ((cmd == WIN_PIDENTIFY))
|
|
/* disable dma & overlap */
|
|
hwif->OUTB(0, io_ports->feature_addr);
|
|
|
|
/* ask drive for ID */
|
|
hwif->OUTBSYNC(drive, cmd, io_ports->command_addr);
|
|
|
|
timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
|
|
timeout += jiffies;
|
|
do {
|
|
if (time_after(jiffies, timeout)) {
|
|
/* drive timed-out */
|
|
return 1;
|
|
}
|
|
/* give drive a breather */
|
|
msleep(50);
|
|
s = use_altstatus ? ide_read_altstatus(drive)
|
|
: ide_read_status(drive);
|
|
} while (s & BUSY_STAT);
|
|
|
|
/* wait for IRQ and DRQ_STAT */
|
|
msleep(50);
|
|
s = ide_read_status(drive);
|
|
|
|
if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) {
|
|
unsigned long flags;
|
|
|
|
/* local CPU only; some systems need this */
|
|
local_irq_save(flags);
|
|
/* drive returned ID */
|
|
do_identify(drive, cmd);
|
|
/* drive responded with ID */
|
|
rc = 0;
|
|
/* clear drive IRQ */
|
|
(void)ide_read_status(drive);
|
|
local_irq_restore(flags);
|
|
} else {
|
|
/* drive refused ID */
|
|
rc = 2;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* try_to_identify - try to identify a drive
|
|
* @drive: drive to probe
|
|
* @cmd: command to use
|
|
*
|
|
* Issue the identify command and then do IRQ probing to
|
|
* complete the identification when needed by finding the
|
|
* IRQ the drive is attached to
|
|
*/
|
|
|
|
static int try_to_identify (ide_drive_t *drive, u8 cmd)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
int retval;
|
|
int autoprobe = 0;
|
|
unsigned long cookie = 0;
|
|
|
|
/*
|
|
* Disable device irq unless we need to
|
|
* probe for it. Otherwise we'll get spurious
|
|
* interrupts during the identify-phase that
|
|
* the irq handler isn't expecting.
|
|
*/
|
|
if (hwif->io_ports.ctl_addr) {
|
|
if (!hwif->irq) {
|
|
autoprobe = 1;
|
|
cookie = probe_irq_on();
|
|
}
|
|
ide_set_irq(drive, autoprobe);
|
|
}
|
|
|
|
retval = actual_try_to_identify(drive, cmd);
|
|
|
|
if (autoprobe) {
|
|
int irq;
|
|
|
|
ide_set_irq(drive, 0);
|
|
/* clear drive IRQ */
|
|
(void)ide_read_status(drive);
|
|
udelay(5);
|
|
irq = probe_irq_off(cookie);
|
|
if (!hwif->irq) {
|
|
if (irq > 0) {
|
|
hwif->irq = irq;
|
|
} else {
|
|
/* Mmmm.. multiple IRQs..
|
|
* don't know which was ours
|
|
*/
|
|
printk("%s: IRQ probe failed (0x%lx)\n",
|
|
drive->name, cookie);
|
|
}
|
|
}
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
static int ide_busy_sleep(ide_hwif_t *hwif)
|
|
{
|
|
unsigned long timeout = jiffies + WAIT_WORSTCASE;
|
|
u8 stat;
|
|
|
|
do {
|
|
msleep(50);
|
|
stat = hwif->INB(hwif->io_ports.status_addr);
|
|
if ((stat & BUSY_STAT) == 0)
|
|
return 0;
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* do_probe - probe an IDE device
|
|
* @drive: drive to probe
|
|
* @cmd: command to use
|
|
*
|
|
* do_probe() has the difficult job of finding a drive if it exists,
|
|
* without getting hung up if it doesn't exist, without trampling on
|
|
* ethernet cards, and without leaving any IRQs dangling to haunt us later.
|
|
*
|
|
* If a drive is "known" to exist (from CMOS or kernel parameters),
|
|
* but does not respond right away, the probe will "hang in there"
|
|
* for the maximum wait time (about 30 seconds), otherwise it will
|
|
* exit much more quickly.
|
|
*
|
|
* Returns: 0 device was identified
|
|
* 1 device timed-out (no response to identify request)
|
|
* 2 device aborted the command (refused to identify itself)
|
|
* 3 bad status from device (possible for ATAPI drives)
|
|
* 4 probe was not attempted because failure was obvious
|
|
*/
|
|
|
|
static int do_probe (ide_drive_t *drive, u8 cmd)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct ide_io_ports *io_ports = &hwif->io_ports;
|
|
int rc;
|
|
u8 stat;
|
|
|
|
if (drive->present) {
|
|
/* avoid waiting for inappropriate probes */
|
|
if ((drive->media != ide_disk) && (cmd == WIN_IDENTIFY))
|
|
return 4;
|
|
}
|
|
#ifdef DEBUG
|
|
printk("probing for %s: present=%d, media=%d, probetype=%s\n",
|
|
drive->name, drive->present, drive->media,
|
|
(cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI");
|
|
#endif
|
|
|
|
/* needed for some systems
|
|
* (e.g. crw9624 as drive0 with disk as slave)
|
|
*/
|
|
msleep(50);
|
|
SELECT_DRIVE(drive);
|
|
msleep(50);
|
|
if (hwif->INB(io_ports->device_addr) != drive->select.all &&
|
|
!drive->present) {
|
|
if (drive->select.b.unit != 0) {
|
|
/* exit with drive0 selected */
|
|
SELECT_DRIVE(&hwif->drives[0]);
|
|
/* allow BUSY_STAT to assert & clear */
|
|
msleep(50);
|
|
}
|
|
/* no i/f present: mmm.. this should be a 4 -ml */
|
|
return 3;
|
|
}
|
|
|
|
stat = ide_read_status(drive);
|
|
|
|
if (OK_STAT(stat, READY_STAT, BUSY_STAT) ||
|
|
drive->present || cmd == WIN_PIDENTIFY) {
|
|
/* send cmd and wait */
|
|
if ((rc = try_to_identify(drive, cmd))) {
|
|
/* failed: try again */
|
|
rc = try_to_identify(drive,cmd);
|
|
}
|
|
|
|
stat = ide_read_status(drive);
|
|
|
|
if (stat == (BUSY_STAT | READY_STAT))
|
|
return 4;
|
|
|
|
if (rc == 1 && cmd == WIN_PIDENTIFY) {
|
|
printk(KERN_ERR "%s: no response (status = 0x%02x), "
|
|
"resetting drive\n", drive->name, stat);
|
|
msleep(50);
|
|
hwif->OUTB(drive->select.all, io_ports->device_addr);
|
|
msleep(50);
|
|
hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr);
|
|
(void)ide_busy_sleep(hwif);
|
|
rc = try_to_identify(drive, cmd);
|
|
}
|
|
|
|
/* ensure drive IRQ is clear */
|
|
stat = ide_read_status(drive);
|
|
|
|
if (rc == 1)
|
|
printk(KERN_ERR "%s: no response (status = 0x%02x)\n",
|
|
drive->name, stat);
|
|
} else {
|
|
/* not present or maybe ATAPI */
|
|
rc = 3;
|
|
}
|
|
if (drive->select.b.unit != 0) {
|
|
/* exit with drive0 selected */
|
|
SELECT_DRIVE(&hwif->drives[0]);
|
|
msleep(50);
|
|
/* ensure drive irq is clear */
|
|
(void)ide_read_status(drive);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static void enable_nest (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
u8 stat;
|
|
|
|
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
|
|
SELECT_DRIVE(drive);
|
|
msleep(50);
|
|
hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
|
|
|
|
if (ide_busy_sleep(hwif)) {
|
|
printk(KERN_CONT "failed (timeout)\n");
|
|
return;
|
|
}
|
|
|
|
msleep(50);
|
|
|
|
stat = ide_read_status(drive);
|
|
|
|
if (!OK_STAT(stat, 0, BAD_STAT))
|
|
printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
|
|
else
|
|
printk(KERN_CONT "success\n");
|
|
|
|
/* if !(success||timed-out) */
|
|
if (do_probe(drive, WIN_IDENTIFY) >= 2) {
|
|
/* look for ATAPI device */
|
|
(void) do_probe(drive, WIN_PIDENTIFY);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* probe_for_drives - upper level drive probe
|
|
* @drive: drive to probe for
|
|
*
|
|
* probe_for_drive() tests for existence of a given drive using do_probe()
|
|
* and presents things to the user as needed.
|
|
*
|
|
* Returns: 0 no device was found
|
|
* 1 device was found (note: drive->present might
|
|
* still be 0)
|
|
*/
|
|
|
|
static inline u8 probe_for_drive (ide_drive_t *drive)
|
|
{
|
|
/*
|
|
* In order to keep things simple we have an id
|
|
* block for all drives at all times. If the device
|
|
* is pre ATA or refuses ATA/ATAPI identify we
|
|
* will add faked data to this.
|
|
*
|
|
* Also note that 0 everywhere means "can't do X"
|
|
*/
|
|
|
|
drive->id = kzalloc(SECTOR_WORDS *4, GFP_KERNEL);
|
|
drive->id_read = 0;
|
|
if(drive->id == NULL)
|
|
{
|
|
printk(KERN_ERR "ide: out of memory for id data.\n");
|
|
return 0;
|
|
}
|
|
strcpy(drive->id->model, "UNKNOWN");
|
|
|
|
/* skip probing? */
|
|
if (!drive->noprobe)
|
|
{
|
|
/* if !(success||timed-out) */
|
|
if (do_probe(drive, WIN_IDENTIFY) >= 2) {
|
|
/* look for ATAPI device */
|
|
(void) do_probe(drive, WIN_PIDENTIFY);
|
|
}
|
|
if (!drive->present)
|
|
/* drive not found */
|
|
return 0;
|
|
if (strstr(drive->id->model, "E X A B Y T E N E S T"))
|
|
enable_nest(drive);
|
|
|
|
/* identification failed? */
|
|
if (!drive->id_read) {
|
|
if (drive->media == ide_disk) {
|
|
printk(KERN_INFO "%s: non-IDE drive, CHS=%d/%d/%d\n",
|
|
drive->name, drive->cyl,
|
|
drive->head, drive->sect);
|
|
} else if (drive->media == ide_cdrom) {
|
|
printk(KERN_INFO "%s: ATAPI cdrom (?)\n", drive->name);
|
|
} else {
|
|
/* nuke it */
|
|
printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name);
|
|
drive->present = 0;
|
|
}
|
|
}
|
|
/* drive was found */
|
|
}
|
|
if(!drive->present)
|
|
return 0;
|
|
/* The drive wasn't being helpful. Add generic info only */
|
|
if (drive->id_read == 0) {
|
|
generic_id(drive);
|
|
return 1;
|
|
}
|
|
|
|
if (drive->media == ide_disk) {
|
|
ide_disk_init_chs(drive);
|
|
ide_disk_init_mult_count(drive);
|
|
}
|
|
|
|
return drive->present;
|
|
}
|
|
|
|
static void hwif_release_dev (struct device *dev)
|
|
{
|
|
ide_hwif_t *hwif = container_of(dev, ide_hwif_t, gendev);
|
|
|
|
complete(&hwif->gendev_rel_comp);
|
|
}
|
|
|
|
static int ide_register_port(ide_hwif_t *hwif)
|
|
{
|
|
int ret;
|
|
|
|
/* register with global device tree */
|
|
strlcpy(hwif->gendev.bus_id,hwif->name,BUS_ID_SIZE);
|
|
hwif->gendev.driver_data = hwif;
|
|
if (hwif->gendev.parent == NULL) {
|
|
if (hwif->dev)
|
|
hwif->gendev.parent = hwif->dev;
|
|
else
|
|
/* Would like to do = &device_legacy */
|
|
hwif->gendev.parent = NULL;
|
|
}
|
|
hwif->gendev.release = hwif_release_dev;
|
|
ret = device_register(&hwif->gendev);
|
|
if (ret < 0) {
|
|
printk(KERN_WARNING "IDE: %s: device_register error: %d\n",
|
|
__func__, ret);
|
|
goto out;
|
|
}
|
|
|
|
get_device(&hwif->gendev);
|
|
|
|
hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev,
|
|
MKDEV(0, 0), hwif, hwif->name);
|
|
if (IS_ERR(hwif->portdev)) {
|
|
ret = PTR_ERR(hwif->portdev);
|
|
device_unregister(&hwif->gendev);
|
|
}
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ide_port_wait_ready - wait for port to become ready
|
|
* @hwif: IDE port
|
|
*
|
|
* This is needed on some PPCs and a bunch of BIOS-less embedded
|
|
* platforms. Typical cases are:
|
|
*
|
|
* - The firmware hard reset the disk before booting the kernel,
|
|
* the drive is still doing it's poweron-reset sequence, that
|
|
* can take up to 30 seconds.
|
|
*
|
|
* - The firmware does nothing (or no firmware), the device is
|
|
* still in POST state (same as above actually).
|
|
*
|
|
* - Some CD/DVD/Writer combo drives tend to drive the bus during
|
|
* their reset sequence even when they are non-selected slave
|
|
* devices, thus preventing discovery of the main HD.
|
|
*
|
|
* Doing this wait-for-non-busy should not harm any existing
|
|
* configuration and fix some issues like the above.
|
|
*
|
|
* BenH.
|
|
*
|
|
* Returns 0 on success, error code (< 0) otherwise.
|
|
*/
|
|
|
|
static int ide_port_wait_ready(ide_hwif_t *hwif)
|
|
{
|
|
int unit, rc;
|
|
|
|
printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name);
|
|
|
|
/* Let HW settle down a bit from whatever init state we
|
|
* come from */
|
|
mdelay(2);
|
|
|
|
/* Wait for BSY bit to go away, spec timeout is 30 seconds,
|
|
* I know of at least one disk who takes 31 seconds, I use 35
|
|
* here to be safe
|
|
*/
|
|
rc = ide_wait_not_busy(hwif, 35000);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Now make sure both master & slave are ready */
|
|
for (unit = 0; unit < MAX_DRIVES; unit++) {
|
|
ide_drive_t *drive = &hwif->drives[unit];
|
|
|
|
/* Ignore disks that we will not probe for later. */
|
|
if (!drive->noprobe || drive->present) {
|
|
SELECT_DRIVE(drive);
|
|
ide_set_irq(drive, 1);
|
|
mdelay(2);
|
|
rc = ide_wait_not_busy(hwif, 35000);
|
|
if (rc)
|
|
goto out;
|
|
} else
|
|
printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n",
|
|
drive->name);
|
|
}
|
|
out:
|
|
/* Exit function with master reselected (let's be sane) */
|
|
if (unit)
|
|
SELECT_DRIVE(&hwif->drives[0]);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ide_undecoded_slave - look for bad CF adapters
|
|
* @drive1: drive
|
|
*
|
|
* Analyse the drives on the interface and attempt to decide if we
|
|
* have the same drive viewed twice. This occurs with crap CF adapters
|
|
* and PCMCIA sometimes.
|
|
*/
|
|
|
|
void ide_undecoded_slave(ide_drive_t *drive1)
|
|
{
|
|
ide_drive_t *drive0 = &drive1->hwif->drives[0];
|
|
|
|
if ((drive1->dn & 1) == 0 || drive0->present == 0)
|
|
return;
|
|
|
|
/* If the models don't match they are not the same product */
|
|
if (strcmp(drive0->id->model, drive1->id->model))
|
|
return;
|
|
|
|
/* Serial numbers do not match */
|
|
if (strncmp(drive0->id->serial_no, drive1->id->serial_no, 20))
|
|
return;
|
|
|
|
/* No serial number, thankfully very rare for CF */
|
|
if (drive0->id->serial_no[0] == 0)
|
|
return;
|
|
|
|
/* Appears to be an IDE flash adapter with decode bugs */
|
|
printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n");
|
|
|
|
drive1->present = 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_undecoded_slave);
|
|
|
|
static int ide_probe_port(ide_hwif_t *hwif)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int irqd;
|
|
int unit, rc = -ENODEV;
|
|
|
|
BUG_ON(hwif->present);
|
|
|
|
if (hwif->drives[0].noprobe && hwif->drives[1].noprobe)
|
|
return -EACCES;
|
|
|
|
/*
|
|
* We must always disable IRQ, as probe_for_drive will assert IRQ, but
|
|
* we'll install our IRQ driver much later...
|
|
*/
|
|
irqd = hwif->irq;
|
|
if (irqd)
|
|
disable_irq(hwif->irq);
|
|
|
|
local_irq_set(flags);
|
|
|
|
if (ide_port_wait_ready(hwif) == -EBUSY)
|
|
printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
|
|
|
|
/*
|
|
* Second drive should only exist if first drive was found,
|
|
* but a lot of cdrom drives are configured as single slaves.
|
|
*/
|
|
for (unit = 0; unit < MAX_DRIVES; ++unit) {
|
|
ide_drive_t *drive = &hwif->drives[unit];
|
|
drive->dn = (hwif->channel ? 2 : 0) + unit;
|
|
(void) probe_for_drive(drive);
|
|
if (drive->present)
|
|
rc = 0;
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
|
|
/*
|
|
* Use cached IRQ number. It might be (and is...) changed by probe
|
|
* code above
|
|
*/
|
|
if (irqd)
|
|
enable_irq(irqd);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void ide_port_tune_devices(ide_hwif_t *hwif)
|
|
{
|
|
const struct ide_port_ops *port_ops = hwif->port_ops;
|
|
int unit;
|
|
|
|
for (unit = 0; unit < MAX_DRIVES; unit++) {
|
|
ide_drive_t *drive = &hwif->drives[unit];
|
|
|
|
if (drive->present && port_ops && port_ops->quirkproc)
|
|
port_ops->quirkproc(drive);
|
|
}
|
|
|
|
for (unit = 0; unit < MAX_DRIVES; ++unit) {
|
|
ide_drive_t *drive = &hwif->drives[unit];
|
|
|
|
if (drive->present) {
|
|
ide_set_max_pio(drive);
|
|
|
|
drive->nice1 = 1;
|
|
|
|
if (hwif->dma_ops)
|
|
ide_set_dma(drive);
|
|
}
|
|
}
|
|
|
|
for (unit = 0; unit < MAX_DRIVES; ++unit) {
|
|
ide_drive_t *drive = &hwif->drives[unit];
|
|
|
|
if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT)
|
|
drive->no_io_32bit = 1;
|
|
else
|
|
drive->no_io_32bit = drive->id->dword_io ? 1 : 0;
|
|
}
|
|
}
|
|
|
|
#if MAX_HWIFS > 1
|
|
/*
|
|
* save_match() is used to simplify logic in init_irq() below.
|
|
*
|
|
* A loophole here is that we may not know about a particular
|
|
* hwif's irq until after that hwif is actually probed/initialized..
|
|
* This could be a problem for the case where an hwif is on a
|
|
* dual interface that requires serialization (eg. cmd640) and another
|
|
* hwif using one of the same irqs is initialized beforehand.
|
|
*
|
|
* This routine detects and reports such situations, but does not fix them.
|
|
*/
|
|
static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match)
|
|
{
|
|
ide_hwif_t *m = *match;
|
|
|
|
if (m && m->hwgroup && m->hwgroup != new->hwgroup) {
|
|
if (!new->hwgroup)
|
|
return;
|
|
printk("%s: potential irq problem with %s and %s\n",
|
|
hwif->name, new->name, m->name);
|
|
}
|
|
if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */
|
|
*match = new;
|
|
}
|
|
#endif /* MAX_HWIFS > 1 */
|
|
|
|
/*
|
|
* init request queue
|
|
*/
|
|
static int ide_init_queue(ide_drive_t *drive)
|
|
{
|
|
struct request_queue *q;
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
int max_sectors = 256;
|
|
int max_sg_entries = PRD_ENTRIES;
|
|
|
|
/*
|
|
* Our default set up assumes the normal IDE case,
|
|
* that is 64K segmenting, standard PRD setup
|
|
* and LBA28. Some drivers then impose their own
|
|
* limits and LBA48 we could raise it but as yet
|
|
* do not.
|
|
*/
|
|
|
|
q = blk_init_queue_node(do_ide_request, &ide_lock, hwif_to_node(hwif));
|
|
if (!q)
|
|
return 1;
|
|
|
|
q->queuedata = drive;
|
|
blk_queue_segment_boundary(q, 0xffff);
|
|
|
|
if (hwif->rqsize < max_sectors)
|
|
max_sectors = hwif->rqsize;
|
|
blk_queue_max_sectors(q, max_sectors);
|
|
|
|
#ifdef CONFIG_PCI
|
|
/* When we have an IOMMU, we may have a problem where pci_map_sg()
|
|
* creates segments that don't completely match our boundary
|
|
* requirements and thus need to be broken up again. Because it
|
|
* doesn't align properly either, we may actually have to break up
|
|
* to more segments than what was we got in the first place, a max
|
|
* worst case is twice as many.
|
|
* This will be fixed once we teach pci_map_sg() about our boundary
|
|
* requirements, hopefully soon. *FIXME*
|
|
*/
|
|
if (!PCI_DMA_BUS_IS_PHYS)
|
|
max_sg_entries >>= 1;
|
|
#endif /* CONFIG_PCI */
|
|
|
|
blk_queue_max_hw_segments(q, max_sg_entries);
|
|
blk_queue_max_phys_segments(q, max_sg_entries);
|
|
|
|
/* assign drive queue */
|
|
drive->queue = q;
|
|
|
|
/* needs drive->queue to be set */
|
|
ide_toggle_bounce(drive, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ide_add_drive_to_hwgroup(ide_drive_t *drive)
|
|
{
|
|
ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
|
|
|
|
spin_lock_irq(&ide_lock);
|
|
if (!hwgroup->drive) {
|
|
/* first drive for hwgroup. */
|
|
drive->next = drive;
|
|
hwgroup->drive = drive;
|
|
hwgroup->hwif = HWIF(hwgroup->drive);
|
|
} else {
|
|
drive->next = hwgroup->drive->next;
|
|
hwgroup->drive->next = drive;
|
|
}
|
|
spin_unlock_irq(&ide_lock);
|
|
}
|
|
|
|
/*
|
|
* For any present drive:
|
|
* - allocate the block device queue
|
|
* - link drive into the hwgroup
|
|
*/
|
|
static void ide_port_setup_devices(ide_hwif_t *hwif)
|
|
{
|
|
int i;
|
|
|
|
mutex_lock(&ide_cfg_mtx);
|
|
for (i = 0; i < MAX_DRIVES; i++) {
|
|
ide_drive_t *drive = &hwif->drives[i];
|
|
|
|
if (!drive->present)
|
|
continue;
|
|
|
|
if (ide_init_queue(drive)) {
|
|
printk(KERN_ERR "ide: failed to init %s\n",
|
|
drive->name);
|
|
continue;
|
|
}
|
|
|
|
ide_add_drive_to_hwgroup(drive);
|
|
}
|
|
mutex_unlock(&ide_cfg_mtx);
|
|
}
|
|
|
|
/*
|
|
* This routine sets up the irq for an ide interface, and creates a new
|
|
* hwgroup for the irq/hwif if none was previously assigned.
|
|
*
|
|
* Much of the code is for correctly detecting/handling irq sharing
|
|
* and irq serialization situations. This is somewhat complex because
|
|
* it handles static as well as dynamic (PCMCIA) IDE interfaces.
|
|
*/
|
|
static int init_irq (ide_hwif_t *hwif)
|
|
{
|
|
struct ide_io_ports *io_ports = &hwif->io_ports;
|
|
unsigned int index;
|
|
ide_hwgroup_t *hwgroup;
|
|
ide_hwif_t *match = NULL;
|
|
|
|
|
|
BUG_ON(in_interrupt());
|
|
BUG_ON(irqs_disabled());
|
|
BUG_ON(hwif == NULL);
|
|
|
|
mutex_lock(&ide_cfg_mtx);
|
|
hwif->hwgroup = NULL;
|
|
#if MAX_HWIFS > 1
|
|
/*
|
|
* Group up with any other hwifs that share our irq(s).
|
|
*/
|
|
for (index = 0; index < MAX_HWIFS; index++) {
|
|
ide_hwif_t *h = &ide_hwifs[index];
|
|
if (h->hwgroup) { /* scan only initialized hwif's */
|
|
if (hwif->irq == h->irq) {
|
|
hwif->sharing_irq = h->sharing_irq = 1;
|
|
if (hwif->chipset != ide_pci ||
|
|
h->chipset != ide_pci) {
|
|
save_match(hwif, h, &match);
|
|
}
|
|
}
|
|
if (hwif->serialized) {
|
|
if (hwif->mate && hwif->mate->irq == h->irq)
|
|
save_match(hwif, h, &match);
|
|
}
|
|
if (h->serialized) {
|
|
if (h->mate && hwif->irq == h->mate->irq)
|
|
save_match(hwif, h, &match);
|
|
}
|
|
}
|
|
}
|
|
#endif /* MAX_HWIFS > 1 */
|
|
/*
|
|
* If we are still without a hwgroup, then form a new one
|
|
*/
|
|
if (match) {
|
|
hwgroup = match->hwgroup;
|
|
hwif->hwgroup = hwgroup;
|
|
/*
|
|
* Link us into the hwgroup.
|
|
* This must be done early, do ensure that unexpected_intr
|
|
* can find the hwif and prevent irq storms.
|
|
* No drives are attached to the new hwif, choose_drive
|
|
* can't do anything stupid (yet).
|
|
* Add ourself as the 2nd entry to the hwgroup->hwif
|
|
* linked list, the first entry is the hwif that owns
|
|
* hwgroup->handler - do not change that.
|
|
*/
|
|
spin_lock_irq(&ide_lock);
|
|
hwif->next = hwgroup->hwif->next;
|
|
hwgroup->hwif->next = hwif;
|
|
BUG_ON(hwif->next == hwif);
|
|
spin_unlock_irq(&ide_lock);
|
|
} else {
|
|
hwgroup = kmalloc_node(sizeof(*hwgroup), GFP_KERNEL|__GFP_ZERO,
|
|
hwif_to_node(hwif));
|
|
if (hwgroup == NULL)
|
|
goto out_up;
|
|
|
|
hwif->hwgroup = hwgroup;
|
|
hwgroup->hwif = hwif->next = hwif;
|
|
|
|
init_timer(&hwgroup->timer);
|
|
hwgroup->timer.function = &ide_timer_expiry;
|
|
hwgroup->timer.data = (unsigned long) hwgroup;
|
|
}
|
|
|
|
/*
|
|
* Allocate the irq, if not already obtained for another hwif
|
|
*/
|
|
if (!match || match->irq != hwif->irq) {
|
|
int sa = 0;
|
|
#if defined(__mc68000__)
|
|
sa = IRQF_SHARED;
|
|
#endif /* __mc68000__ */
|
|
|
|
if (IDE_CHIPSET_IS_PCI(hwif->chipset))
|
|
sa = IRQF_SHARED;
|
|
|
|
if (io_ports->ctl_addr)
|
|
/* clear nIEN */
|
|
hwif->OUTB(0x08, io_ports->ctl_addr);
|
|
|
|
if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup))
|
|
goto out_unlink;
|
|
}
|
|
|
|
if (!hwif->rqsize) {
|
|
if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
|
|
(hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
|
|
hwif->rqsize = 256;
|
|
else
|
|
hwif->rqsize = 65536;
|
|
}
|
|
|
|
#if !defined(__mc68000__)
|
|
printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
|
|
io_ports->data_addr, io_ports->status_addr,
|
|
io_ports->ctl_addr, hwif->irq);
|
|
#else
|
|
printk("%s at 0x%08lx on irq %d", hwif->name,
|
|
io_ports->data_addr, hwif->irq);
|
|
#endif /* __mc68000__ */
|
|
if (match)
|
|
printk(" (%sed with %s)",
|
|
hwif->sharing_irq ? "shar" : "serializ", match->name);
|
|
printk("\n");
|
|
|
|
mutex_unlock(&ide_cfg_mtx);
|
|
return 0;
|
|
out_unlink:
|
|
ide_remove_port_from_hwgroup(hwif);
|
|
out_up:
|
|
mutex_unlock(&ide_cfg_mtx);
|
|
return 1;
|
|
}
|
|
|
|
static int ata_lock(dev_t dev, void *data)
|
|
{
|
|
/* FIXME: we want to pin hwif down */
|
|
return 0;
|
|
}
|
|
|
|
static struct kobject *ata_probe(dev_t dev, int *part, void *data)
|
|
{
|
|
ide_hwif_t *hwif = data;
|
|
int unit = *part >> PARTN_BITS;
|
|
ide_drive_t *drive = &hwif->drives[unit];
|
|
if (!drive->present)
|
|
return NULL;
|
|
|
|
if (drive->media == ide_disk)
|
|
request_module("ide-disk");
|
|
if (drive->scsi)
|
|
request_module("ide-scsi");
|
|
if (drive->media == ide_cdrom || drive->media == ide_optical)
|
|
request_module("ide-cd");
|
|
if (drive->media == ide_tape)
|
|
request_module("ide-tape");
|
|
if (drive->media == ide_floppy)
|
|
request_module("ide-floppy");
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct kobject *exact_match(dev_t dev, int *part, void *data)
|
|
{
|
|
struct gendisk *p = data;
|
|
*part &= (1 << PARTN_BITS) - 1;
|
|
return &p->dev.kobj;
|
|
}
|
|
|
|
static int exact_lock(dev_t dev, void *data)
|
|
{
|
|
struct gendisk *p = data;
|
|
|
|
if (!get_disk(p))
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
void ide_register_region(struct gendisk *disk)
|
|
{
|
|
blk_register_region(MKDEV(disk->major, disk->first_minor),
|
|
disk->minors, NULL, exact_match, exact_lock, disk);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_register_region);
|
|
|
|
void ide_unregister_region(struct gendisk *disk)
|
|
{
|
|
blk_unregister_region(MKDEV(disk->major, disk->first_minor),
|
|
disk->minors);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_unregister_region);
|
|
|
|
void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
unsigned int unit = (drive->select.all >> 4) & 1;
|
|
|
|
disk->major = hwif->major;
|
|
disk->first_minor = unit << PARTN_BITS;
|
|
sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit);
|
|
disk->queue = drive->queue;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_init_disk);
|
|
|
|
static void ide_remove_drive_from_hwgroup(ide_drive_t *drive)
|
|
{
|
|
ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
|
|
|
|
if (drive == drive->next) {
|
|
/* special case: last drive from hwgroup. */
|
|
BUG_ON(hwgroup->drive != drive);
|
|
hwgroup->drive = NULL;
|
|
} else {
|
|
ide_drive_t *walk;
|
|
|
|
walk = hwgroup->drive;
|
|
while (walk->next != drive)
|
|
walk = walk->next;
|
|
walk->next = drive->next;
|
|
if (hwgroup->drive == drive) {
|
|
hwgroup->drive = drive->next;
|
|
hwgroup->hwif = hwgroup->drive->hwif;
|
|
}
|
|
}
|
|
BUG_ON(hwgroup->drive == drive);
|
|
}
|
|
|
|
static void drive_release_dev (struct device *dev)
|
|
{
|
|
ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);
|
|
|
|
ide_proc_unregister_device(drive);
|
|
|
|
spin_lock_irq(&ide_lock);
|
|
ide_remove_drive_from_hwgroup(drive);
|
|
kfree(drive->id);
|
|
drive->id = NULL;
|
|
drive->present = 0;
|
|
/* Messed up locking ... */
|
|
spin_unlock_irq(&ide_lock);
|
|
blk_cleanup_queue(drive->queue);
|
|
spin_lock_irq(&ide_lock);
|
|
drive->queue = NULL;
|
|
spin_unlock_irq(&ide_lock);
|
|
|
|
complete(&drive->gendev_rel_comp);
|
|
}
|
|
|
|
#ifndef ide_default_irq
|
|
#define ide_default_irq(irq) 0
|
|
#endif
|
|
|
|
static int hwif_init(ide_hwif_t *hwif)
|
|
{
|
|
int old_irq;
|
|
|
|
if (!hwif->irq) {
|
|
hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
|
|
if (!hwif->irq) {
|
|
printk("%s: DISABLED, NO IRQ\n", hwif->name);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (register_blkdev(hwif->major, hwif->name))
|
|
return 0;
|
|
|
|
if (!hwif->sg_max_nents)
|
|
hwif->sg_max_nents = PRD_ENTRIES;
|
|
|
|
hwif->sg_table = kmalloc(sizeof(struct scatterlist)*hwif->sg_max_nents,
|
|
GFP_KERNEL);
|
|
if (!hwif->sg_table) {
|
|
printk(KERN_ERR "%s: unable to allocate SG table.\n", hwif->name);
|
|
goto out;
|
|
}
|
|
|
|
sg_init_table(hwif->sg_table, hwif->sg_max_nents);
|
|
|
|
if (init_irq(hwif) == 0)
|
|
goto done;
|
|
|
|
old_irq = hwif->irq;
|
|
/*
|
|
* It failed to initialise. Find the default IRQ for
|
|
* this port and try that.
|
|
*/
|
|
hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
|
|
if (!hwif->irq) {
|
|
printk("%s: Disabled unable to get IRQ %d.\n",
|
|
hwif->name, old_irq);
|
|
goto out;
|
|
}
|
|
if (init_irq(hwif)) {
|
|
printk("%s: probed IRQ %d and default IRQ %d failed.\n",
|
|
hwif->name, old_irq, hwif->irq);
|
|
goto out;
|
|
}
|
|
printk("%s: probed IRQ %d failed, using default.\n",
|
|
hwif->name, hwif->irq);
|
|
|
|
done:
|
|
blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS,
|
|
THIS_MODULE, ata_probe, ata_lock, hwif);
|
|
return 1;
|
|
|
|
out:
|
|
unregister_blkdev(hwif->major, hwif->name);
|
|
return 0;
|
|
}
|
|
|
|
static void hwif_register_devices(ide_hwif_t *hwif)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < MAX_DRIVES; i++) {
|
|
ide_drive_t *drive = &hwif->drives[i];
|
|
struct device *dev = &drive->gendev;
|
|
int ret;
|
|
|
|
if (!drive->present)
|
|
continue;
|
|
|
|
ide_add_generic_settings(drive);
|
|
|
|
snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i);
|
|
dev->parent = &hwif->gendev;
|
|
dev->bus = &ide_bus_type;
|
|
dev->driver_data = drive;
|
|
dev->release = drive_release_dev;
|
|
|
|
ret = device_register(dev);
|
|
if (ret < 0)
|
|
printk(KERN_WARNING "IDE: %s: device_register error: "
|
|
"%d\n", __func__, ret);
|
|
}
|
|
}
|
|
|
|
static void ide_port_init_devices(ide_hwif_t *hwif)
|
|
{
|
|
const struct ide_port_ops *port_ops = hwif->port_ops;
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_DRIVES; i++) {
|
|
ide_drive_t *drive = &hwif->drives[i];
|
|
|
|
if (hwif->host_flags & IDE_HFLAG_IO_32BIT)
|
|
drive->io_32bit = 1;
|
|
if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS)
|
|
drive->unmask = 1;
|
|
if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
|
|
drive->no_unmask = 1;
|
|
}
|
|
|
|
if (port_ops && port_ops->port_init_devs)
|
|
port_ops->port_init_devs(hwif);
|
|
}
|
|
|
|
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
|
|
const struct ide_port_info *d)
|
|
{
|
|
hwif->channel = port;
|
|
|
|
if (d->chipset)
|
|
hwif->chipset = d->chipset;
|
|
|
|
if (d->init_iops)
|
|
d->init_iops(hwif);
|
|
|
|
if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) ||
|
|
(d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
|
|
hwif->irq = port ? 15 : 14;
|
|
|
|
/* ->host_flags may be set by ->init_iops (or even earlier...) */
|
|
hwif->host_flags |= d->host_flags;
|
|
hwif->pio_mask = d->pio_mask;
|
|
|
|
/* ->set_pio_mode for DTC2278 is currently limited to port 0 */
|
|
if (hwif->chipset != ide_dtc2278 || hwif->channel == 0)
|
|
hwif->port_ops = d->port_ops;
|
|
|
|
hwif->swdma_mask = d->swdma_mask;
|
|
hwif->mwdma_mask = d->mwdma_mask;
|
|
hwif->ultra_mask = d->udma_mask;
|
|
|
|
if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) {
|
|
int rc;
|
|
|
|
if (d->init_dma)
|
|
rc = d->init_dma(hwif, d);
|
|
else
|
|
rc = ide_hwif_setup_dma(hwif, d);
|
|
|
|
if (rc < 0) {
|
|
printk(KERN_INFO "%s: DMA disabled\n", hwif->name);
|
|
hwif->swdma_mask = 0;
|
|
hwif->mwdma_mask = 0;
|
|
hwif->ultra_mask = 0;
|
|
} else if (d->dma_ops)
|
|
hwif->dma_ops = d->dma_ops;
|
|
}
|
|
|
|
if ((d->host_flags & IDE_HFLAG_SERIALIZE) ||
|
|
((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base)) {
|
|
if (hwif->mate)
|
|
hwif->mate->serialized = hwif->serialized = 1;
|
|
}
|
|
|
|
if (d->host_flags & IDE_HFLAG_RQSIZE_256)
|
|
hwif->rqsize = 256;
|
|
|
|
/* call chipset specific routine for each enabled port */
|
|
if (d->init_hwif)
|
|
d->init_hwif(hwif);
|
|
}
|
|
|
|
static void ide_port_cable_detect(ide_hwif_t *hwif)
|
|
{
|
|
const struct ide_port_ops *port_ops = hwif->port_ops;
|
|
|
|
if (port_ops && port_ops->cable_detect && (hwif->ultra_mask & 0x78)) {
|
|
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
|
|
hwif->cbl = port_ops->cable_detect(hwif);
|
|
}
|
|
}
|
|
|
|
static ssize_t store_delete_devices(struct device *portdev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t n)
|
|
{
|
|
ide_hwif_t *hwif = dev_get_drvdata(portdev);
|
|
|
|
if (strncmp(buf, "1", n))
|
|
return -EINVAL;
|
|
|
|
ide_port_unregister_devices(hwif);
|
|
|
|
return n;
|
|
};
|
|
|
|
static DEVICE_ATTR(delete_devices, S_IWUSR, NULL, store_delete_devices);
|
|
|
|
static ssize_t store_scan(struct device *portdev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t n)
|
|
{
|
|
ide_hwif_t *hwif = dev_get_drvdata(portdev);
|
|
|
|
if (strncmp(buf, "1", n))
|
|
return -EINVAL;
|
|
|
|
ide_port_unregister_devices(hwif);
|
|
ide_port_scan(hwif);
|
|
|
|
return n;
|
|
};
|
|
|
|
static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan);
|
|
|
|
static struct device_attribute *ide_port_attrs[] = {
|
|
&dev_attr_delete_devices,
|
|
&dev_attr_scan,
|
|
NULL
|
|
};
|
|
|
|
static int ide_sysfs_register_port(ide_hwif_t *hwif)
|
|
{
|
|
int i, rc;
|
|
|
|
for (i = 0; ide_port_attrs[i]; i++) {
|
|
rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
|
|
if (rc)
|
|
break;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ide_find_port_slot - find free ide_hwifs[] slot
|
|
* @d: IDE port info
|
|
*
|
|
* Return the new hwif. If we are out of free slots return NULL.
|
|
*/
|
|
|
|
ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d)
|
|
{
|
|
ide_hwif_t *hwif;
|
|
int i;
|
|
u8 bootable = (d && (d->host_flags & IDE_HFLAG_NON_BOOTABLE)) ? 0 : 1;
|
|
|
|
/*
|
|
* Claim an unassigned slot.
|
|
*
|
|
* Give preference to claiming other slots before claiming ide0/ide1,
|
|
* just in case there's another interface yet-to-be-scanned
|
|
* which uses ports 0x1f0/0x170 (the ide0/ide1 defaults).
|
|
*
|
|
* Unless there is a bootable card that does not use the standard
|
|
* ports 0x1f0/0x170 (the ide0/ide1 defaults).
|
|
*/
|
|
if (bootable) {
|
|
i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0;
|
|
|
|
for (; i < MAX_HWIFS; i++) {
|
|
hwif = &ide_hwifs[i];
|
|
if (hwif->chipset == ide_unknown)
|
|
return hwif;
|
|
}
|
|
} else {
|
|
for (i = 2; i < MAX_HWIFS; i++) {
|
|
hwif = &ide_hwifs[i];
|
|
if (hwif->chipset == ide_unknown)
|
|
return hwif;
|
|
}
|
|
for (i = 0; i < 2 && i < MAX_HWIFS; i++) {
|
|
hwif = &ide_hwifs[i];
|
|
if (hwif->chipset == ide_unknown)
|
|
return hwif;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_find_port_slot);
|
|
|
|
int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
|
|
{
|
|
ide_hwif_t *hwif, *mate = NULL;
|
|
int i, rc = 0;
|
|
|
|
for (i = 0; i < MAX_HWIFS; i++) {
|
|
if (idx[i] == 0xff) {
|
|
mate = NULL;
|
|
continue;
|
|
}
|
|
|
|
hwif = &ide_hwifs[idx[i]];
|
|
|
|
ide_port_apply_params(hwif);
|
|
|
|
if (d == NULL) {
|
|
mate = NULL;
|
|
continue;
|
|
}
|
|
|
|
if ((i & 1) && mate) {
|
|
hwif->mate = mate;
|
|
mate->mate = hwif;
|
|
}
|
|
|
|
mate = (i & 1) ? NULL : hwif;
|
|
|
|
ide_init_port(hwif, i & 1, d);
|
|
ide_port_cable_detect(hwif);
|
|
ide_port_init_devices(hwif);
|
|
}
|
|
|
|
for (i = 0; i < MAX_HWIFS; i++) {
|
|
if (idx[i] == 0xff)
|
|
continue;
|
|
|
|
hwif = &ide_hwifs[idx[i]];
|
|
|
|
if (ide_probe_port(hwif) == 0)
|
|
hwif->present = 1;
|
|
|
|
if (hwif->chipset != ide_4drives || !hwif->mate ||
|
|
!hwif->mate->present)
|
|
ide_register_port(hwif);
|
|
|
|
if (hwif->present)
|
|
ide_port_tune_devices(hwif);
|
|
}
|
|
|
|
for (i = 0; i < MAX_HWIFS; i++) {
|
|
if (idx[i] == 0xff)
|
|
continue;
|
|
|
|
hwif = &ide_hwifs[idx[i]];
|
|
|
|
if (hwif_init(hwif) == 0) {
|
|
printk(KERN_INFO "%s: failed to initialize IDE "
|
|
"interface\n", hwif->name);
|
|
hwif->present = 0;
|
|
rc = -1;
|
|
continue;
|
|
}
|
|
|
|
if (hwif->present)
|
|
ide_port_setup_devices(hwif);
|
|
|
|
ide_acpi_init(hwif);
|
|
|
|
if (hwif->present)
|
|
ide_acpi_port_init_devices(hwif);
|
|
}
|
|
|
|
for (i = 0; i < MAX_HWIFS; i++) {
|
|
if (idx[i] == 0xff)
|
|
continue;
|
|
|
|
hwif = &ide_hwifs[idx[i]];
|
|
|
|
if (hwif->chipset == ide_unknown)
|
|
hwif->chipset = ide_generic;
|
|
|
|
if (hwif->present)
|
|
hwif_register_devices(hwif);
|
|
}
|
|
|
|
for (i = 0; i < MAX_HWIFS; i++) {
|
|
if (idx[i] == 0xff)
|
|
continue;
|
|
|
|
hwif = &ide_hwifs[idx[i]];
|
|
|
|
ide_sysfs_register_port(hwif);
|
|
ide_proc_register_port(hwif);
|
|
|
|
if (hwif->present)
|
|
ide_proc_port_register_devices(hwif);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_device_add_all);
|
|
|
|
int ide_device_add(u8 idx[4], const struct ide_port_info *d)
|
|
{
|
|
u8 idx_all[MAX_HWIFS];
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_HWIFS; i++)
|
|
idx_all[i] = (i < 4) ? idx[i] : 0xff;
|
|
|
|
return ide_device_add_all(idx_all, d);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_device_add);
|
|
|
|
void ide_port_scan(ide_hwif_t *hwif)
|
|
{
|
|
ide_port_apply_params(hwif);
|
|
ide_port_cable_detect(hwif);
|
|
ide_port_init_devices(hwif);
|
|
|
|
if (ide_probe_port(hwif) < 0)
|
|
return;
|
|
|
|
hwif->present = 1;
|
|
|
|
ide_port_tune_devices(hwif);
|
|
ide_acpi_port_init_devices(hwif);
|
|
ide_port_setup_devices(hwif);
|
|
hwif_register_devices(hwif);
|
|
ide_proc_port_register_devices(hwif);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_port_scan);
|
|
|
|
static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no,
|
|
const struct ide_port_info *d,
|
|
unsigned long config)
|
|
{
|
|
ide_hwif_t *hwif;
|
|
unsigned long base, ctl;
|
|
int irq;
|
|
|
|
if (port_no == 0) {
|
|
base = 0x1f0;
|
|
ctl = 0x3f6;
|
|
irq = 14;
|
|
} else {
|
|
base = 0x170;
|
|
ctl = 0x376;
|
|
irq = 15;
|
|
}
|
|
|
|
if (!request_region(base, 8, d->name)) {
|
|
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
|
|
d->name, base, base + 7);
|
|
return;
|
|
}
|
|
|
|
if (!request_region(ctl, 1, d->name)) {
|
|
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
|
|
d->name, ctl);
|
|
release_region(base, 8);
|
|
return;
|
|
}
|
|
|
|
ide_std_init_ports(hw, base, ctl);
|
|
hw->irq = irq;
|
|
hw->chipset = d->chipset;
|
|
|
|
hwif = ide_find_port_slot(d);
|
|
if (hwif) {
|
|
ide_init_port_hw(hwif, hw);
|
|
if (config)
|
|
hwif->config_data = config;
|
|
idx[port_no] = hwif->index;
|
|
}
|
|
}
|
|
|
|
int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
|
|
{
|
|
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
|
|
hw_regs_t hw[2];
|
|
|
|
memset(&hw, 0, sizeof(hw));
|
|
|
|
if ((d->host_flags & IDE_HFLAG_QD_2ND_PORT) == 0)
|
|
ide_legacy_init_one(idx, &hw[0], 0, d, config);
|
|
ide_legacy_init_one(idx, &hw[1], 1, d, config);
|
|
|
|
if (idx[0] == 0xff && idx[1] == 0xff &&
|
|
(d->host_flags & IDE_HFLAG_SINGLE))
|
|
return -ENOENT;
|
|
|
|
ide_device_add(idx, d);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_legacy_device_add);
|