mirror of https://gitee.com/openkylin/linux.git
505 lines
15 KiB
C
505 lines
15 KiB
C
/*
|
|
* rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip.
|
|
*
|
|
* Copyright (C) 2008 Sergey Lapin
|
|
* Based on ds1307 driver by James Chapman and David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define FM3130_RTC_CONTROL (0x0)
|
|
#define FM3130_CAL_CONTROL (0x1)
|
|
#define FM3130_RTC_SECONDS (0x2)
|
|
#define FM3130_RTC_MINUTES (0x3)
|
|
#define FM3130_RTC_HOURS (0x4)
|
|
#define FM3130_RTC_DAY (0x5)
|
|
#define FM3130_RTC_DATE (0x6)
|
|
#define FM3130_RTC_MONTHS (0x7)
|
|
#define FM3130_RTC_YEARS (0x8)
|
|
|
|
#define FM3130_ALARM_SECONDS (0x9)
|
|
#define FM3130_ALARM_MINUTES (0xa)
|
|
#define FM3130_ALARM_HOURS (0xb)
|
|
#define FM3130_ALARM_DATE (0xc)
|
|
#define FM3130_ALARM_MONTHS (0xd)
|
|
#define FM3130_ALARM_WP_CONTROL (0xe)
|
|
|
|
#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */
|
|
#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */
|
|
#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */
|
|
#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */
|
|
#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */
|
|
#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */
|
|
#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */
|
|
#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */
|
|
#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */
|
|
|
|
#define FM3130_CLOCK_REGS 7
|
|
#define FM3130_ALARM_REGS 5
|
|
|
|
struct fm3130 {
|
|
u8 reg_addr_time;
|
|
u8 reg_addr_alarm;
|
|
u8 regs[15];
|
|
struct i2c_msg msg[4];
|
|
struct i2c_client *client;
|
|
struct rtc_device *rtc;
|
|
int data_valid;
|
|
int alarm;
|
|
};
|
|
static const struct i2c_device_id fm3130_id[] = {
|
|
{ "fm3130", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, fm3130_id);
|
|
|
|
#define FM3130_MODE_NORMAL 0
|
|
#define FM3130_MODE_WRITE 1
|
|
#define FM3130_MODE_READ 2
|
|
|
|
static void fm3130_rtc_mode(struct device *dev, int mode)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
|
|
fm3130->regs[FM3130_RTC_CONTROL] =
|
|
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
|
|
switch (mode) {
|
|
case FM3130_MODE_NORMAL:
|
|
fm3130->regs[FM3130_RTC_CONTROL] &=
|
|
~(FM3130_RTC_CONTROL_BIT_WRITE |
|
|
FM3130_RTC_CONTROL_BIT_READ);
|
|
break;
|
|
case FM3130_MODE_WRITE:
|
|
fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE;
|
|
break;
|
|
case FM3130_MODE_READ:
|
|
fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ;
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "invalid mode %d\n", mode);
|
|
break;
|
|
}
|
|
/* Checking for alarm */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
|
|
fm3130->alarm = 1;
|
|
fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
|
|
}
|
|
i2c_smbus_write_byte_data(fm3130->client,
|
|
FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
|
|
}
|
|
|
|
static int fm3130_get_time(struct device *dev, struct rtc_time *t)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
int tmp;
|
|
|
|
if (!fm3130->data_valid) {
|
|
/* We have invalid data in RTC, probably due
|
|
to battery faults or other problems. Return EIO
|
|
for now, it will allow us to set data later instead
|
|
of error during probing which disables device */
|
|
return -EIO;
|
|
}
|
|
fm3130_rtc_mode(dev, FM3130_MODE_READ);
|
|
|
|
/* read the RTC date and time registers all at once */
|
|
tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
|
|
fm3130->msg, 2);
|
|
if (tmp != 2) {
|
|
dev_err(dev, "%s error %d\n", "read", tmp);
|
|
return -EIO;
|
|
}
|
|
|
|
fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
|
|
|
|
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
|
|
"%02x %02x %02x %02x %02x %02x %02x\n",
|
|
"read",
|
|
fm3130->regs[0], fm3130->regs[1],
|
|
fm3130->regs[2], fm3130->regs[3],
|
|
fm3130->regs[4], fm3130->regs[5],
|
|
fm3130->regs[6], fm3130->regs[7],
|
|
fm3130->regs[8], fm3130->regs[9],
|
|
fm3130->regs[0xa], fm3130->regs[0xb],
|
|
fm3130->regs[0xc], fm3130->regs[0xd],
|
|
fm3130->regs[0xe]);
|
|
|
|
t->tm_sec = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
|
|
t->tm_min = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
|
|
tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f;
|
|
t->tm_hour = bcd2bin(tmp);
|
|
t->tm_wday = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1;
|
|
t->tm_mday = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
|
|
tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f;
|
|
t->tm_mon = bcd2bin(tmp) - 1;
|
|
|
|
/* assume 20YY not 19YY, and ignore CF bit */
|
|
t->tm_year = bcd2bin(fm3130->regs[FM3130_RTC_YEARS]) + 100;
|
|
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"read", t->tm_sec, t->tm_min,
|
|
t->tm_hour, t->tm_mday,
|
|
t->tm_mon, t->tm_year, t->tm_wday);
|
|
|
|
/* initial clock setting can be undefined */
|
|
return rtc_valid_tm(t);
|
|
}
|
|
|
|
|
|
static int fm3130_set_time(struct device *dev, struct rtc_time *t)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
int tmp, i;
|
|
u8 *buf = fm3130->regs;
|
|
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"write", t->tm_sec, t->tm_min,
|
|
t->tm_hour, t->tm_mday,
|
|
t->tm_mon, t->tm_year, t->tm_wday);
|
|
|
|
/* first register addr */
|
|
buf[FM3130_RTC_SECONDS] = bin2bcd(t->tm_sec);
|
|
buf[FM3130_RTC_MINUTES] = bin2bcd(t->tm_min);
|
|
buf[FM3130_RTC_HOURS] = bin2bcd(t->tm_hour);
|
|
buf[FM3130_RTC_DAY] = bin2bcd(t->tm_wday + 1);
|
|
buf[FM3130_RTC_DATE] = bin2bcd(t->tm_mday);
|
|
buf[FM3130_RTC_MONTHS] = bin2bcd(t->tm_mon + 1);
|
|
|
|
/* assume 20YY not 19YY */
|
|
tmp = t->tm_year - 100;
|
|
buf[FM3130_RTC_YEARS] = bin2bcd(tmp);
|
|
|
|
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x"
|
|
"%02x %02x %02x %02x %02x %02x %02x %02x\n",
|
|
"write", buf[0], buf[1], buf[2], buf[3],
|
|
buf[4], buf[5], buf[6], buf[7],
|
|
buf[8], buf[9], buf[0xa], buf[0xb],
|
|
buf[0xc], buf[0xd], buf[0xe]);
|
|
|
|
fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
|
|
|
|
/* Writing time registers, we don't support multibyte transfers */
|
|
for (i = 0; i < FM3130_CLOCK_REGS; i++) {
|
|
i2c_smbus_write_byte_data(fm3130->client,
|
|
FM3130_RTC_SECONDS + i,
|
|
fm3130->regs[FM3130_RTC_SECONDS + i]);
|
|
}
|
|
|
|
fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
|
|
|
|
/* We assume here that data are valid once written */
|
|
if (!fm3130->data_valid)
|
|
fm3130->data_valid = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
int tmp;
|
|
struct rtc_time *tm = &alrm->time;
|
|
/* read the RTC alarm registers all at once */
|
|
tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
|
|
&fm3130->msg[2], 2);
|
|
if (tmp != 2) {
|
|
dev_err(dev, "%s error %d\n", "read", tmp);
|
|
return -EIO;
|
|
}
|
|
dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n",
|
|
fm3130->regs[FM3130_ALARM_SECONDS],
|
|
fm3130->regs[FM3130_ALARM_MINUTES],
|
|
fm3130->regs[FM3130_ALARM_HOURS],
|
|
fm3130->regs[FM3130_ALARM_DATE],
|
|
fm3130->regs[FM3130_ALARM_MONTHS]);
|
|
|
|
|
|
tm->tm_sec = bcd2bin(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
|
|
tm->tm_min = bcd2bin(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
|
|
tm->tm_hour = bcd2bin(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
|
|
tm->tm_mday = bcd2bin(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
|
|
tm->tm_mon = bcd2bin(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
|
|
if (tm->tm_mon > 0)
|
|
tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"read alarm", tm->tm_sec, tm->tm_min,
|
|
tm->tm_hour, tm->tm_mday,
|
|
tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
struct rtc_time *tm = &alrm->time;
|
|
int i;
|
|
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"write alarm", tm->tm_sec, tm->tm_min,
|
|
tm->tm_hour, tm->tm_mday,
|
|
tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
if (tm->tm_sec != -1)
|
|
fm3130->regs[FM3130_ALARM_SECONDS] =
|
|
bin2bcd(tm->tm_sec) | 0x80;
|
|
|
|
if (tm->tm_min != -1)
|
|
fm3130->regs[FM3130_ALARM_MINUTES] =
|
|
bin2bcd(tm->tm_min) | 0x80;
|
|
|
|
if (tm->tm_hour != -1)
|
|
fm3130->regs[FM3130_ALARM_HOURS] =
|
|
bin2bcd(tm->tm_hour) | 0x80;
|
|
|
|
if (tm->tm_mday != -1)
|
|
fm3130->regs[FM3130_ALARM_DATE] =
|
|
bin2bcd(tm->tm_mday) | 0x80;
|
|
|
|
if (tm->tm_mon != -1)
|
|
fm3130->regs[FM3130_ALARM_MONTHS] =
|
|
bin2bcd(tm->tm_mon + 1) | 0x80;
|
|
|
|
dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
|
|
fm3130->regs[FM3130_ALARM_SECONDS],
|
|
fm3130->regs[FM3130_ALARM_MINUTES],
|
|
fm3130->regs[FM3130_ALARM_HOURS],
|
|
fm3130->regs[FM3130_ALARM_DATE],
|
|
fm3130->regs[FM3130_ALARM_MONTHS]);
|
|
/* Writing time registers, we don't support multibyte transfers */
|
|
for (i = 0; i < FM3130_ALARM_REGS; i++) {
|
|
i2c_smbus_write_byte_data(fm3130->client,
|
|
FM3130_ALARM_SECONDS + i,
|
|
fm3130->regs[FM3130_ALARM_SECONDS + i]);
|
|
}
|
|
fm3130->regs[FM3130_RTC_CONTROL] =
|
|
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
|
|
/* Checking for alarm */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
|
|
fm3130->alarm = 1;
|
|
fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
|
|
}
|
|
if (alrm->enabled) {
|
|
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
|
|
(fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_CAL)) |
|
|
FM3130_RTC_CONTROL_BIT_AEN);
|
|
} else {
|
|
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
|
|
fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_AEN));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct rtc_class_ops fm3130_rtc_ops = {
|
|
.read_time = fm3130_get_time,
|
|
.set_time = fm3130_set_time,
|
|
.read_alarm = fm3130_read_alarm,
|
|
.set_alarm = fm3130_set_alarm,
|
|
};
|
|
|
|
static struct i2c_driver fm3130_driver;
|
|
|
|
static int __devinit fm3130_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct fm3130 *fm3130;
|
|
int err = -ENODEV;
|
|
int tmp;
|
|
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
|
|
|
|
if (!i2c_check_functionality(adapter,
|
|
I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
|
|
return -EIO;
|
|
|
|
fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL);
|
|
|
|
if (!fm3130)
|
|
return -ENOMEM;
|
|
|
|
fm3130->client = client;
|
|
i2c_set_clientdata(client, fm3130);
|
|
fm3130->reg_addr_time = FM3130_RTC_SECONDS;
|
|
fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS;
|
|
|
|
/* Messages to read time */
|
|
fm3130->msg[0].addr = client->addr;
|
|
fm3130->msg[0].flags = 0;
|
|
fm3130->msg[0].len = 1;
|
|
fm3130->msg[0].buf = &fm3130->reg_addr_time;
|
|
|
|
fm3130->msg[1].addr = client->addr;
|
|
fm3130->msg[1].flags = I2C_M_RD;
|
|
fm3130->msg[1].len = FM3130_CLOCK_REGS;
|
|
fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS];
|
|
|
|
/* Messages to read alarm */
|
|
fm3130->msg[2].addr = client->addr;
|
|
fm3130->msg[2].flags = 0;
|
|
fm3130->msg[2].len = 1;
|
|
fm3130->msg[2].buf = &fm3130->reg_addr_alarm;
|
|
|
|
fm3130->msg[3].addr = client->addr;
|
|
fm3130->msg[3].flags = I2C_M_RD;
|
|
fm3130->msg[3].len = FM3130_ALARM_REGS;
|
|
fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
|
|
|
|
fm3130->data_valid = 0;
|
|
|
|
tmp = i2c_transfer(adapter, fm3130->msg, 4);
|
|
if (tmp != 4) {
|
|
pr_debug("read error %d\n", tmp);
|
|
err = -EIO;
|
|
goto exit_free;
|
|
}
|
|
|
|
fm3130->regs[FM3130_RTC_CONTROL] =
|
|
i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL);
|
|
fm3130->regs[FM3130_CAL_CONTROL] =
|
|
i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
|
|
|
|
/* Checking for alarm */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
|
|
fm3130->alarm = 1;
|
|
fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
|
|
}
|
|
|
|
/* Disabling calibration mode */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
|
|
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
|
fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_CAL));
|
|
dev_warn(&client->dev, "Disabling calibration mode!\n");
|
|
}
|
|
|
|
/* Disabling read and write modes */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
|
|
fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) {
|
|
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
|
fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_READ |
|
|
FM3130_RTC_CONTROL_BIT_WRITE));
|
|
dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
|
|
}
|
|
|
|
/* oscillator off? turn it on, so clock can tick. */
|
|
if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
|
|
i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL,
|
|
fm3130->regs[FM3130_CAL_CONTROL] &
|
|
~(FM3130_CAL_CONTROL_BIT_nOSCEN));
|
|
|
|
/* oscillator fault? clear flag, and warn */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB)
|
|
dev_warn(&client->dev, "Low battery!\n");
|
|
|
|
/* oscillator fault? clear flag, and warn */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
|
|
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
|
fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~FM3130_RTC_CONTROL_BIT_POR);
|
|
dev_warn(&client->dev, "SET TIME!\n");
|
|
}
|
|
/* ACS is controlled by alarm */
|
|
i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
|
|
|
|
/* TODO */
|
|
/* TODO need to sanity check alarm */
|
|
tmp = fm3130->regs[FM3130_RTC_SECONDS];
|
|
tmp = bcd2bin(tmp & 0x7f);
|
|
if (tmp > 60)
|
|
goto exit_bad;
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
|
|
if (tmp > 60)
|
|
goto exit_bad;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
|
|
if (tmp == 0 || tmp > 31)
|
|
goto exit_bad;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
|
|
if (tmp == 0 || tmp > 12)
|
|
goto exit_bad;
|
|
|
|
tmp = fm3130->regs[FM3130_RTC_HOURS];
|
|
|
|
fm3130->data_valid = 1;
|
|
|
|
exit_bad:
|
|
if (!fm3130->data_valid)
|
|
dev_dbg(&client->dev,
|
|
"%s: %02x %02x %02x %02x %02x %02x %02x %02x"
|
|
"%02x %02x %02x %02x %02x %02x %02x\n",
|
|
"bogus registers",
|
|
fm3130->regs[0], fm3130->regs[1],
|
|
fm3130->regs[2], fm3130->regs[3],
|
|
fm3130->regs[4], fm3130->regs[5],
|
|
fm3130->regs[6], fm3130->regs[7],
|
|
fm3130->regs[8], fm3130->regs[9],
|
|
fm3130->regs[0xa], fm3130->regs[0xb],
|
|
fm3130->regs[0xc], fm3130->regs[0xd],
|
|
fm3130->regs[0xe]);
|
|
|
|
/* We won't bail out here because we just got invalid data.
|
|
Time setting from u-boot doesn't work anyway */
|
|
fm3130->rtc = rtc_device_register(client->name, &client->dev,
|
|
&fm3130_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(fm3130->rtc)) {
|
|
err = PTR_ERR(fm3130->rtc);
|
|
dev_err(&client->dev,
|
|
"unable to register the class device\n");
|
|
goto exit_free;
|
|
}
|
|
return 0;
|
|
exit_free:
|
|
kfree(fm3130);
|
|
return err;
|
|
}
|
|
|
|
static int __devexit fm3130_remove(struct i2c_client *client)
|
|
{
|
|
struct fm3130 *fm3130 = i2c_get_clientdata(client);
|
|
|
|
rtc_device_unregister(fm3130->rtc);
|
|
kfree(fm3130);
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_driver fm3130_driver = {
|
|
.driver = {
|
|
.name = "rtc-fm3130",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = fm3130_probe,
|
|
.remove = __devexit_p(fm3130_remove),
|
|
.id_table = fm3130_id,
|
|
};
|
|
|
|
static int __init fm3130_init(void)
|
|
{
|
|
return i2c_add_driver(&fm3130_driver);
|
|
}
|
|
module_init(fm3130_init);
|
|
|
|
static void __exit fm3130_exit(void)
|
|
{
|
|
i2c_del_driver(&fm3130_driver);
|
|
}
|
|
module_exit(fm3130_exit);
|
|
|
|
MODULE_DESCRIPTION("RTC driver for FM3130");
|
|
MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
|
|
MODULE_LICENSE("GPL");
|
|
|