mirror of https://gitee.com/openkylin/linux.git
91c527a556
e100: min_mtu 68, max_mtu 1500 - remove e100_change_mtu entirely, is identical to old eth_change_mtu, and no longer serves a purpose. No need to set min_mtu or max_mtu explicitly, as ether_setup() will already set them to 68 and 1500. e1000: min_mtu 46, max_mtu 16110 e1000e: min_mtu 68, max_mtu varies based on adapter fm10k: min_mtu 68, max_mtu 15342 - remove fm10k_change_mtu entirely, does nothing now i40e: min_mtu 68, max_mtu 9706 i40evf: min_mtu 68, max_mtu 9706 igb: min_mtu 68, max_mtu 9216 - There are two different "max" frame sizes claimed and both checked in the driver, the larger value wasn't relevant though, so I've set max_mtu to the smaller of the two values here to retain identical behavior. igbvf: min_mtu 68, max_mtu 9216 - Same issue as igb duplicated ixgb: min_mtu 68, max_mtu 16114 - Also remove pointless old == new check, as that's done in dev_set_mtu ixgbe: min_mtu 68, max_mtu 9710 ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware - Some hw can only handle up to max_mtu 1504 on a vf, others 9710 CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| Makefile | ||
| e1000_82575.c | ||
| e1000_82575.h | ||
| e1000_defines.h | ||
| e1000_hw.h | ||
| e1000_i210.c | ||
| e1000_i210.h | ||
| e1000_mac.c | ||
| e1000_mac.h | ||
| e1000_mbx.c | ||
| e1000_mbx.h | ||
| e1000_nvm.c | ||
| e1000_nvm.h | ||
| e1000_phy.c | ||
| e1000_phy.h | ||
| e1000_regs.h | ||
| igb.h | ||
| igb_ethtool.c | ||
| igb_hwmon.c | ||
| igb_main.c | ||
| igb_ptp.c | ||