mirror of https://gitee.com/openkylin/linux.git
409 lines
9.1 KiB
C
409 lines
9.1 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/pm.c
|
|
*
|
|
* OMAP2 Power Management Routines
|
|
*
|
|
* Copyright (C) 2006 Nokia Corporation
|
|
* Tony Lindgren <tony@atomide.com>
|
|
*
|
|
* Copyright (C) 2005 Texas Instruments, Inc.
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
*
|
|
* Based on pm.c for omap1
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/pm.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/arch/irqs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sram.h>
|
|
#include <asm/arch/pm.h>
|
|
|
|
#include "prcm-regs.h"
|
|
|
|
static struct clk *vclk;
|
|
static void (*omap2_sram_idle)(void);
|
|
static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
|
|
static void (*saved_idle)(void);
|
|
|
|
extern void __init pmdomain_init(void);
|
|
extern void pmdomain_set_autoidle(void);
|
|
|
|
static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
|
|
|
|
void omap2_pm_idle(void)
|
|
{
|
|
local_irq_disable();
|
|
local_fiq_disable();
|
|
if (need_resched()) {
|
|
local_fiq_enable();
|
|
local_irq_enable();
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Since an interrupt may set up a timer, we don't want to
|
|
* reprogram the hardware timer with interrupts enabled.
|
|
* Re-enable interrupts only after returning from idle.
|
|
*/
|
|
timer_dyn_reprogram();
|
|
|
|
omap2_sram_idle();
|
|
local_fiq_enable();
|
|
local_irq_enable();
|
|
}
|
|
|
|
static int omap2_pm_prepare(suspend_state_t state)
|
|
{
|
|
int error = 0;
|
|
|
|
/* We cannot sleep in idle until we have resumed */
|
|
saved_idle = pm_idle;
|
|
pm_idle = NULL;
|
|
|
|
switch (state)
|
|
{
|
|
case PM_SUSPEND_STANDBY:
|
|
case PM_SUSPEND_MEM:
|
|
break;
|
|
|
|
case PM_SUSPEND_DISK:
|
|
return -ENOTSUPP;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \
|
|
OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \
|
|
OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
|
|
|
|
#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
|
|
|
|
#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \
|
|
OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \
|
|
OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
|
|
|
|
#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, ®, reg);
|
|
|
|
static void omap2_pm_debug(char * desc)
|
|
{
|
|
printk("%s:\n", desc);
|
|
|
|
preg(CM_CLKSTCTRL_MPU);
|
|
preg(CM_CLKSTCTRL_CORE);
|
|
preg(CM_CLKSTCTRL_GFX);
|
|
preg(CM_CLKSTCTRL_DSP);
|
|
preg(CM_CLKSTCTRL_MDM);
|
|
|
|
preg(PM_PWSTCTRL_MPU);
|
|
preg(PM_PWSTCTRL_CORE);
|
|
preg(PM_PWSTCTRL_GFX);
|
|
preg(PM_PWSTCTRL_DSP);
|
|
preg(PM_PWSTCTRL_MDM);
|
|
|
|
preg(PM_PWSTST_MPU);
|
|
preg(PM_PWSTST_CORE);
|
|
preg(PM_PWSTST_GFX);
|
|
preg(PM_PWSTST_DSP);
|
|
preg(PM_PWSTST_MDM);
|
|
|
|
preg(CM_AUTOIDLE1_CORE);
|
|
preg(CM_AUTOIDLE2_CORE);
|
|
preg(CM_AUTOIDLE3_CORE);
|
|
preg(CM_AUTOIDLE4_CORE);
|
|
preg(CM_AUTOIDLE_WKUP);
|
|
preg(CM_AUTOIDLE_PLL);
|
|
preg(CM_AUTOIDLE_DSP);
|
|
preg(CM_AUTOIDLE_MDM);
|
|
|
|
preg(CM_ICLKEN1_CORE);
|
|
preg(CM_ICLKEN2_CORE);
|
|
preg(CM_ICLKEN3_CORE);
|
|
preg(CM_ICLKEN4_CORE);
|
|
preg(CM_ICLKEN_GFX);
|
|
preg(CM_ICLKEN_WKUP);
|
|
preg(CM_ICLKEN_DSP);
|
|
preg(CM_ICLKEN_MDM);
|
|
|
|
preg(CM_IDLEST1_CORE);
|
|
preg(CM_IDLEST2_CORE);
|
|
preg(CM_IDLEST3_CORE);
|
|
preg(CM_IDLEST4_CORE);
|
|
preg(CM_IDLEST_GFX);
|
|
preg(CM_IDLEST_WKUP);
|
|
preg(CM_IDLEST_CKGEN);
|
|
preg(CM_IDLEST_DSP);
|
|
preg(CM_IDLEST_MDM);
|
|
|
|
preg(RM_RSTST_MPU);
|
|
preg(RM_RSTST_GFX);
|
|
preg(RM_RSTST_WKUP);
|
|
preg(RM_RSTST_DSP);
|
|
preg(RM_RSTST_MDM);
|
|
|
|
preg(PM_WKDEP_MPU);
|
|
preg(PM_WKDEP_CORE);
|
|
preg(PM_WKDEP_GFX);
|
|
preg(PM_WKDEP_DSP);
|
|
preg(PM_WKDEP_MDM);
|
|
|
|
preg(CM_FCLKEN_WKUP);
|
|
preg(CM_ICLKEN_WKUP);
|
|
preg(CM_IDLEST_WKUP);
|
|
preg(CM_AUTOIDLE_WKUP);
|
|
preg(CM_CLKSEL_WKUP);
|
|
|
|
preg(PM_WKEN_WKUP);
|
|
preg(PM_WKST_WKUP);
|
|
}
|
|
|
|
static inline void omap2_pm_save_registers(void)
|
|
{
|
|
/* Save interrupt registers */
|
|
OMAP24XX_SAVE(INTC_MIR0);
|
|
OMAP24XX_SAVE(INTC_MIR1);
|
|
OMAP24XX_SAVE(INTC_MIR2);
|
|
|
|
/* Save power control registers */
|
|
OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
|
|
OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
|
|
OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
|
|
OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
|
|
OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
|
|
|
|
/* Save power state registers */
|
|
OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
|
|
OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
|
|
OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
|
|
OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
|
|
OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
|
|
|
|
/* Save autoidle registers */
|
|
OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
|
|
OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
|
|
OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
|
|
OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
|
|
OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
|
|
OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
|
|
OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
|
|
OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
|
|
|
|
/* Save idle state registers */
|
|
OMAP24XX_SAVE(CM_IDLEST1_CORE);
|
|
OMAP24XX_SAVE(CM_IDLEST2_CORE);
|
|
OMAP24XX_SAVE(CM_IDLEST3_CORE);
|
|
OMAP24XX_SAVE(CM_IDLEST4_CORE);
|
|
OMAP24XX_SAVE(CM_IDLEST_GFX);
|
|
OMAP24XX_SAVE(CM_IDLEST_WKUP);
|
|
OMAP24XX_SAVE(CM_IDLEST_CKGEN);
|
|
OMAP24XX_SAVE(CM_IDLEST_DSP);
|
|
OMAP24XX_SAVE(CM_IDLEST_MDM);
|
|
|
|
/* Save clock registers */
|
|
OMAP24XX_SAVE(CM_FCLKEN1_CORE);
|
|
OMAP24XX_SAVE(CM_FCLKEN2_CORE);
|
|
OMAP24XX_SAVE(CM_ICLKEN1_CORE);
|
|
OMAP24XX_SAVE(CM_ICLKEN2_CORE);
|
|
OMAP24XX_SAVE(CM_ICLKEN3_CORE);
|
|
OMAP24XX_SAVE(CM_ICLKEN4_CORE);
|
|
}
|
|
|
|
static inline void omap2_pm_restore_registers(void)
|
|
{
|
|
/* Restore clock state registers */
|
|
OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
|
|
OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
|
|
OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
|
|
OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
|
|
OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
|
|
|
|
/* Restore power state registers */
|
|
OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
|
|
OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
|
|
OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
|
|
OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
|
|
OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
|
|
|
|
/* Restore idle state registers */
|
|
OMAP24XX_RESTORE(CM_IDLEST1_CORE);
|
|
OMAP24XX_RESTORE(CM_IDLEST2_CORE);
|
|
OMAP24XX_RESTORE(CM_IDLEST3_CORE);
|
|
OMAP24XX_RESTORE(CM_IDLEST4_CORE);
|
|
OMAP24XX_RESTORE(CM_IDLEST_GFX);
|
|
OMAP24XX_RESTORE(CM_IDLEST_WKUP);
|
|
OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
|
|
OMAP24XX_RESTORE(CM_IDLEST_DSP);
|
|
OMAP24XX_RESTORE(CM_IDLEST_MDM);
|
|
|
|
/* Restore autoidle registers */
|
|
OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
|
|
OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
|
|
OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
|
|
OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
|
|
OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
|
|
OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
|
|
OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
|
|
OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
|
|
|
|
/* Restore clock registers */
|
|
OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
|
|
OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
|
|
OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
|
|
OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
|
|
OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
|
|
OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
|
|
|
|
/* REVISIT: Clear interrupts here */
|
|
|
|
/* Restore interrupt registers */
|
|
OMAP24XX_RESTORE(INTC_MIR0);
|
|
OMAP24XX_RESTORE(INTC_MIR1);
|
|
OMAP24XX_RESTORE(INTC_MIR2);
|
|
}
|
|
|
|
static int omap2_pm_suspend(void)
|
|
{
|
|
int processor_type = 0;
|
|
|
|
/* REVISIT: 0x21 or 0x26? */
|
|
if (cpu_is_omap2420())
|
|
processor_type = 0x21;
|
|
|
|
if (!processor_type)
|
|
return -ENOTSUPP;
|
|
|
|
local_irq_disable();
|
|
local_fiq_disable();
|
|
|
|
omap2_pm_save_registers();
|
|
|
|
/* Disable interrupts except for the wake events */
|
|
INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
|
|
INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
|
|
INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
|
|
|
|
pmdomain_set_autoidle();
|
|
|
|
/* Clear old wake-up events */
|
|
PM_WKST1_CORE = 0;
|
|
PM_WKST2_CORE = 0;
|
|
PM_WKST_WKUP = 0;
|
|
|
|
/* Enable wake-up events */
|
|
PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */
|
|
PM_WKEN2_CORE = (1 << 2); /* UART3 */
|
|
PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */
|
|
|
|
/* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
|
|
* in the SRAM suspend code */
|
|
CM_FCLKEN1_CORE = 0;
|
|
CM_FCLKEN2_CORE = 0;
|
|
CM_ICLKEN1_CORE = 0;
|
|
CM_ICLKEN3_CORE = 0;
|
|
CM_ICLKEN4_CORE = 0;
|
|
|
|
omap2_pm_debug("Status before suspend");
|
|
|
|
/* Must wait for serial buffers to clear */
|
|
mdelay(200);
|
|
|
|
/* Jump to SRAM suspend code
|
|
* REVISIT: When is this SDRC_DLLB_CTRL?
|
|
*/
|
|
omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
|
|
|
|
/* Back from sleep */
|
|
omap2_pm_restore_registers();
|
|
|
|
local_fiq_enable();
|
|
local_irq_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap2_pm_enter(suspend_state_t state)
|
|
{
|
|
int ret = 0;
|
|
|
|
switch (state)
|
|
{
|
|
case PM_SUSPEND_STANDBY:
|
|
case PM_SUSPEND_MEM:
|
|
ret = omap2_pm_suspend();
|
|
break;
|
|
case PM_SUSPEND_DISK:
|
|
ret = -ENOTSUPP;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap2_pm_finish(suspend_state_t state)
|
|
{
|
|
pm_idle = saved_idle;
|
|
return 0;
|
|
}
|
|
|
|
static struct pm_ops omap_pm_ops = {
|
|
.pm_disk_mode = 0,
|
|
.prepare = omap2_pm_prepare,
|
|
.enter = omap2_pm_enter,
|
|
.finish = omap2_pm_finish,
|
|
};
|
|
|
|
int __init omap2_pm_init(void)
|
|
{
|
|
printk("Power Management for TI OMAP.\n");
|
|
|
|
vclk = clk_get(NULL, "virt_prcm_set");
|
|
if (IS_ERR(vclk)) {
|
|
printk(KERN_ERR "Could not get PM vclk\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* We copy the assembler sleep/wakeup routines to SRAM.
|
|
* These routines need to be in SRAM as that's the only
|
|
* memory the MPU can see when it wakes up.
|
|
*/
|
|
omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
|
|
omap24xx_idle_loop_suspend_sz);
|
|
|
|
omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
|
|
omap24xx_cpu_suspend_sz);
|
|
|
|
pm_set_ops(&omap_pm_ops);
|
|
pm_idle = omap2_pm_idle;
|
|
|
|
pmdomain_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
__initcall(omap2_pm_init);
|