mirror of https://gitee.com/openkylin/linux.git
94 lines
2.6 KiB
Plaintext
94 lines
2.6 KiB
Plaintext
* Dialog DA9063 Power Management Integrated Circuit (PMIC)
|
|
|
|
DA9093 consists of a large and varied group of sub-devices (I2C Only):
|
|
|
|
Device Supply Names Description
|
|
------ ------------ -----------
|
|
da9063-regulator : : LDOs & BUCKs
|
|
da9063-rtc : : Real-Time Clock
|
|
da9063-watchdog : : Watchdog
|
|
|
|
======
|
|
|
|
Required properties:
|
|
|
|
- compatible : Should be "dlg,da9063"
|
|
- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
|
|
modified to match the chip's OTP settings).
|
|
- interrupt-parent : Specifies the reference to the interrupt controller for
|
|
the DA9063.
|
|
- interrupts : IRQ line information.
|
|
- interrupt-controller
|
|
|
|
Sub-nodes:
|
|
|
|
- regulators : This node defines the settings for the LDOs and BUCKs. The
|
|
DA9063 regulators are bound using their names listed below:
|
|
|
|
bcore1 : BUCK CORE1
|
|
bcore2 : BUCK CORE2
|
|
bpro : BUCK PRO
|
|
bmem : BUCK MEM
|
|
bio : BUCK IO
|
|
bperi : BUCK PERI
|
|
ldo1 : LDO_1
|
|
ldo2 : LDO_2
|
|
ldo3 : LDO_3
|
|
ldo4 : LDO_4
|
|
ldo5 : LDO_5
|
|
ldo6 : LDO_6
|
|
ldo7 : LDO_7
|
|
ldo8 : LDO_8
|
|
ldo9 : LDO_9
|
|
ldo10 : LDO_10
|
|
ldo11 : LDO_11
|
|
|
|
The component follows the standard regulator framework and the bindings
|
|
details of individual regulator device can be found in:
|
|
Documentation/devicetree/bindings/regulator/regulator.txt
|
|
|
|
- rtc : This node defines settings for the Real-Time Clock associated with
|
|
the DA9063. There are currently no entries in this binding, however
|
|
compatible = "dlg,da9063-rtc" should be added if a node is created.
|
|
|
|
- watchdog : This node defines settings for the Watchdog timer associated
|
|
with the DA9063. There are currently no entries in this binding, however
|
|
compatible = "dlg,da9063-watchdog" should be added if a node is created.
|
|
|
|
|
|
Example:
|
|
|
|
pmic0: da9063@58 {
|
|
compatible = "dlg,da9063"
|
|
reg = <0x58>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
|
|
rtc {
|
|
compatible = "dlg,da9063-rtc";
|
|
};
|
|
|
|
wdt {
|
|
compatible = "dlg,da9063-watchdog";
|
|
};
|
|
|
|
regulators {
|
|
DA9063_BCORE1: bcore1 {
|
|
regulator-name = "BCORE1";
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <500000>;
|
|
regulator-max-microamp = <2000000>;
|
|
regulator-boot-on;
|
|
};
|
|
DA9063_LDO11: ldo11 {
|
|
regulator-name = "LDO_11";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
|