mirror of https://gitee.com/openkylin/linux.git
134 lines
3.4 KiB
C
134 lines
3.4 KiB
C
/*
|
|
* This file define the irq handler for MSP SLM subsystem interrupts.
|
|
*
|
|
* Copyright 2005-2007 PMC-Sierra, Inc, derived from irq_cpu.c
|
|
* Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
#include <msp_cic_int.h>
|
|
#include <msp_regs.h>
|
|
|
|
/*
|
|
* NOTE: We are only enabling support for VPE0 right now.
|
|
*/
|
|
|
|
static inline void unmask_msp_cic_irq(unsigned int irq)
|
|
{
|
|
|
|
/* check for PER interrupt range */
|
|
if (irq < MSP_PER_INTBASE)
|
|
*CIC_VPE0_MSK_REG |= (1 << (irq - MSP_CIC_INTBASE));
|
|
else
|
|
*PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE));
|
|
}
|
|
|
|
static inline void mask_msp_cic_irq(unsigned int irq)
|
|
{
|
|
/* check for PER interrupt range */
|
|
if (irq < MSP_PER_INTBASE)
|
|
*CIC_VPE0_MSK_REG &= ~(1 << (irq - MSP_CIC_INTBASE));
|
|
else
|
|
*PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE));
|
|
}
|
|
|
|
/*
|
|
* While we ack the interrupt interrupts are disabled and thus we don't need
|
|
* to deal with concurrency issues. Same for msp_cic_irq_end.
|
|
*/
|
|
static inline void ack_msp_cic_irq(unsigned int irq)
|
|
{
|
|
mask_msp_cic_irq(irq);
|
|
|
|
/*
|
|
* only really necessary for 18, 16-14 and sometimes 3:0 (since
|
|
* these can be edge sensitive) but it doesn't hurt for the others.
|
|
*/
|
|
|
|
/* check for PER interrupt range */
|
|
if (irq < MSP_PER_INTBASE)
|
|
*CIC_STS_REG = (1 << (irq - MSP_CIC_INTBASE));
|
|
else
|
|
*PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE));
|
|
}
|
|
|
|
static struct irq_chip msp_cic_irq_controller = {
|
|
.name = "MSP_CIC",
|
|
.ack = ack_msp_cic_irq,
|
|
.mask = ack_msp_cic_irq,
|
|
.mask_ack = ack_msp_cic_irq,
|
|
.unmask = unmask_msp_cic_irq,
|
|
};
|
|
|
|
|
|
void __init msp_cic_irq_init(void)
|
|
{
|
|
int i;
|
|
|
|
/* Mask/clear interrupts. */
|
|
*CIC_VPE0_MSK_REG = 0x00000000;
|
|
*PER_INT_MSK_REG = 0x00000000;
|
|
*CIC_STS_REG = 0xFFFFFFFF;
|
|
*PER_INT_STS_REG = 0xFFFFFFFF;
|
|
|
|
#if defined(CONFIG_PMC_MSP7120_GW) || \
|
|
defined(CONFIG_PMC_MSP7120_EVAL)
|
|
/*
|
|
* The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI.
|
|
* These inputs map to EXT_INT_POL[6:4] inside the CIC.
|
|
* They are to be active low, level sensitive.
|
|
*/
|
|
*CIC_EXT_CFG_REG &= 0xFFFF8F8F;
|
|
#endif
|
|
|
|
/* initialize all the IRQ descriptors */
|
|
for (i = MSP_CIC_INTBASE; i < MSP_PER_INTBASE + 32; i++)
|
|
set_irq_chip_and_handler(i, &msp_cic_irq_controller,
|
|
handle_level_irq);
|
|
}
|
|
|
|
void msp_cic_irq_dispatch(void)
|
|
{
|
|
u32 pending;
|
|
int intbase;
|
|
|
|
intbase = MSP_CIC_INTBASE;
|
|
pending = *CIC_STS_REG & *CIC_VPE0_MSK_REG;
|
|
|
|
/* check for PER interrupt */
|
|
if (pending == (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) {
|
|
intbase = MSP_PER_INTBASE;
|
|
pending = *PER_INT_STS_REG & *PER_INT_MSK_REG;
|
|
}
|
|
|
|
/* check for spurious interrupt */
|
|
if (pending == 0x00000000) {
|
|
printk(KERN_ERR
|
|
"Spurious %s interrupt? status %08x, mask %08x\n",
|
|
(intbase == MSP_CIC_INTBASE) ? "CIC" : "PER",
|
|
(intbase == MSP_CIC_INTBASE) ?
|
|
*CIC_STS_REG : *PER_INT_STS_REG,
|
|
(intbase == MSP_CIC_INTBASE) ?
|
|
*CIC_VPE0_MSK_REG : *PER_INT_MSK_REG);
|
|
return;
|
|
}
|
|
|
|
/* check for the timer and dispatch it first */
|
|
if ((intbase == MSP_CIC_INTBASE) &&
|
|
(pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))))
|
|
do_IRQ(MSP_INT_VPE0_TIMER);
|
|
else
|
|
do_IRQ(ffs(pending) + intbase - 1);
|
|
}
|