mirror of https://gitee.com/openkylin/linux.git
518 lines
12 KiB
Plaintext
518 lines
12 KiB
Plaintext
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "omap443x.dtsi"
|
|
#include "motorola-cpcap-mapphone.dtsi"
|
|
|
|
/ {
|
|
model = "Motorola Droid 4 XT894";
|
|
compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
|
|
|
|
chosen {
|
|
stdout-path = &uart3;
|
|
};
|
|
|
|
aliases {
|
|
display0 = &lcd0;
|
|
display1 = &hdmi0;
|
|
};
|
|
|
|
/*
|
|
* We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
|
|
* then 1023 - 1024 seems to contain mbm.
|
|
*/
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x3fd00000>; /* 1021 MB */
|
|
};
|
|
|
|
/* Poweroff GPIO probably connected to CPCAP */
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-0 = <&poweroff_gpio>;
|
|
pinctrl-names = "default";
|
|
gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */
|
|
};
|
|
|
|
hdmi0: connector {
|
|
compatible = "hdmi-connector";
|
|
pinctrl-0 = <&hdmi_hpd_gpio>;
|
|
pinctrl-names = "default";
|
|
label = "hdmi";
|
|
type = "d";
|
|
|
|
hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&hdmi_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* HDMI 5V regulator probably sourced from battery. Let's keep
|
|
* keep this as always enabled for HDMI to work until we've
|
|
* figured what the encoder chip is.
|
|
*/
|
|
hdmi_regulator: regulator-hdmi {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "hdmi";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* HS USB Host PHY on PORT 1 */
|
|
hsusb1_phy: hsusb1_phy {
|
|
compatible = "usb-nop-xceiv";
|
|
};
|
|
|
|
/* LCD regulator from sw5 source */
|
|
lcd_regulator: regulator-lcd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "lcd";
|
|
regulator-min-microvolt = <5050000>;
|
|
regulator-max-microvolt = <5050000>;
|
|
gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
|
|
enable-active-high;
|
|
vin-supply = <&sw5>;
|
|
};
|
|
|
|
/* This is probably coming straight from the battery.. */
|
|
wl12xx_vmmc: regulator-wl12xx {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vwl1271";
|
|
regulator-min-microvolt = <1650000>;
|
|
regulator-max-microvolt = <1650000>;
|
|
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */
|
|
startup-delay-us = <70000>;
|
|
enable-active-high;
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
|
|
volume_down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
linux,can-disable;
|
|
};
|
|
|
|
slider {
|
|
label = "Keypad Slide";
|
|
gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_KEYPAD_SLIDE>;
|
|
linux,can-disable;
|
|
|
|
};
|
|
};
|
|
};
|
|
|
|
&dss {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio6 {
|
|
touchscreen_reset {
|
|
gpio-hog;
|
|
gpios = <13 0>;
|
|
output-high;
|
|
line-name = "touchscreen-reset";
|
|
};
|
|
};
|
|
|
|
&dsi1 {
|
|
status = "okay";
|
|
vdd-supply = <&vcsi>;
|
|
|
|
port {
|
|
dsi1_out_ep: endpoint {
|
|
remote-endpoint = <&lcd0_in>;
|
|
lanes = <0 1 2 3 4 5>;
|
|
};
|
|
};
|
|
|
|
lcd0: display {
|
|
compatible = "panel-dsi-cm";
|
|
label = "lcd0";
|
|
vddi-supply = <&lcd_regulator>;
|
|
reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
|
|
|
|
panel-timing {
|
|
clock-frequency = <0>; /* Calculated by dsi */
|
|
|
|
hback-porch = <2>;
|
|
hactive = <540>;
|
|
hfront-porch = <0>;
|
|
hsync-len = <2>;
|
|
|
|
vback-porch = <1>;
|
|
vactive = <960>;
|
|
vfront-porch = <0>;
|
|
vsync-len = <1>;
|
|
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <1>;
|
|
};
|
|
|
|
port {
|
|
lcd0_in: endpoint {
|
|
remote-endpoint = <&dsi1_out_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
pinctrl-0 = <&dss_hdmi_pins>;
|
|
pinctrl-names = "default";
|
|
vdda-supply = <&vdac>;
|
|
|
|
port {
|
|
hdmi_out: endpoint {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
lanes = <1 0 3 2 5 4 7 6>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
tmp105@48 {
|
|
compatible = "ti,tmp105";
|
|
reg = <0x48>;
|
|
pinctrl-0 = <&tmp105_irq>;
|
|
pinctrl-names = "default";
|
|
/* kpd_row0.gpio_178 */
|
|
interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
|
|
&omap4_pmx_core 0x14e>;
|
|
interrupt-names = "irq", "wakeup";
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&keypad {
|
|
keypad,num-rows = <8>;
|
|
keypad,num-columns = <8>;
|
|
linux,keymap = <
|
|
|
|
/* Row 1 */
|
|
MATRIX_KEY(0, 2, KEY_1)
|
|
MATRIX_KEY(0, 6, KEY_2)
|
|
MATRIX_KEY(2, 3, KEY_3)
|
|
MATRIX_KEY(0, 7, KEY_4)
|
|
MATRIX_KEY(0, 4, KEY_5)
|
|
MATRIX_KEY(5, 5, KEY_6)
|
|
MATRIX_KEY(0, 1, KEY_7)
|
|
MATRIX_KEY(0, 5, KEY_8)
|
|
MATRIX_KEY(0, 0, KEY_9)
|
|
MATRIX_KEY(1, 6, KEY_0)
|
|
|
|
/* Row 2 */
|
|
MATRIX_KEY(3, 4, KEY_APOSTROPHE)
|
|
MATRIX_KEY(7, 6, KEY_Q)
|
|
MATRIX_KEY(7, 7, KEY_W)
|
|
MATRIX_KEY(7, 2, KEY_E)
|
|
MATRIX_KEY(1, 0, KEY_R)
|
|
MATRIX_KEY(4, 4, KEY_T)
|
|
MATRIX_KEY(1, 2, KEY_Y)
|
|
MATRIX_KEY(6, 7, KEY_U)
|
|
MATRIX_KEY(2, 2, KEY_I)
|
|
MATRIX_KEY(5, 6, KEY_O)
|
|
MATRIX_KEY(3, 7, KEY_P)
|
|
MATRIX_KEY(6, 5, KEY_BACKSPACE)
|
|
|
|
/* Row 3 */
|
|
MATRIX_KEY(5, 4, KEY_TAB)
|
|
MATRIX_KEY(5, 7, KEY_A)
|
|
MATRIX_KEY(2, 7, KEY_S)
|
|
MATRIX_KEY(7, 0, KEY_D)
|
|
MATRIX_KEY(2, 6, KEY_F)
|
|
MATRIX_KEY(6, 2, KEY_G)
|
|
MATRIX_KEY(6, 6, KEY_H)
|
|
MATRIX_KEY(1, 4, KEY_J)
|
|
MATRIX_KEY(3, 1, KEY_K)
|
|
MATRIX_KEY(2, 1, KEY_L)
|
|
MATRIX_KEY(4, 6, KEY_ENTER)
|
|
|
|
/* Row 4 */
|
|
MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */
|
|
MATRIX_KEY(6, 1, KEY_Z)
|
|
MATRIX_KEY(7, 4, KEY_X)
|
|
MATRIX_KEY(5, 1, KEY_C)
|
|
MATRIX_KEY(1, 7, KEY_V)
|
|
MATRIX_KEY(2, 4, KEY_B)
|
|
MATRIX_KEY(4, 1, KEY_N)
|
|
MATRIX_KEY(1, 1, KEY_M)
|
|
MATRIX_KEY(3, 5, KEY_COMMA)
|
|
MATRIX_KEY(5, 2, KEY_DOT)
|
|
MATRIX_KEY(6, 3, KEY_UP)
|
|
MATRIX_KEY(7, 3, KEY_OK)
|
|
|
|
/* Row 5 */
|
|
MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */
|
|
MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */
|
|
MATRIX_KEY(6, 0, KEY_MINUS)
|
|
MATRIX_KEY(4, 7, KEY_EQUAL)
|
|
MATRIX_KEY(1, 5, KEY_SPACE)
|
|
MATRIX_KEY(3, 2, KEY_SLASH)
|
|
MATRIX_KEY(4, 3, KEY_LEFT)
|
|
MATRIX_KEY(5, 3, KEY_DOWN)
|
|
MATRIX_KEY(3, 3, KEY_RIGHT)
|
|
|
|
/* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
|
|
MATRIX_KEY(5, 0, KEY_VOLUMEUP)
|
|
>;
|
|
};
|
|
|
|
&mmc1 {
|
|
vmmc-supply = <&vwlan2>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */
|
|
};
|
|
|
|
&mmc2 {
|
|
vmmc-supply = <&vsdio>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
};
|
|
|
|
&mmc3 {
|
|
vmmc-supply = <&wl12xx_vmmc>;
|
|
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
|
|
&omap4_pmx_core 0xde>;
|
|
|
|
non-removable;
|
|
bus-width = <4>;
|
|
cap-power-off-card;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
wlcore: wlcore@2 {
|
|
compatible = "ti,wl1283";
|
|
reg = <2>;
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */
|
|
ref-clock-frequency = <26000000>;
|
|
tcxo-clock-frequency = <26000000>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
lm3532@38 {
|
|
compatible = "ti,lm3532";
|
|
reg = <0x38>;
|
|
|
|
enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
|
|
|
|
backlight {
|
|
compatible = "ti,lm3532-backlight";
|
|
|
|
lcd {
|
|
led-sources = <0 1 2>;
|
|
ramp-up-msec = <1>;
|
|
ramp-down-msec = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* REVISIT: Add gpio173 reset pin handling to the driver, see gpio-hog above.
|
|
* If the GPIO reset is used, we probably need to have /lib/firmware/maxtouch.fw
|
|
* available. See "mxt-app" and "droid4-touchscreen-firmware" tools for more
|
|
* information.
|
|
*/
|
|
&i2c2 {
|
|
tsp@4a {
|
|
compatible = "atmel,maxtouch";
|
|
reg = <0x4a>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&touchscreen_pins>;
|
|
|
|
/* gpio_183 with sys_nirq2 pad as wakeup */
|
|
interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING
|
|
&omap4_pmx_core 0x160>;
|
|
interrupt-names = "irq", "wakeup";
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&omap4_pmx_core {
|
|
|
|
/* hdmi_hpd.gpio_63 */
|
|
hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
|
|
>;
|
|
};
|
|
|
|
/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
|
|
dss_hdmi_pins: pinmux_dss_hdmi_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
|
|
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
/* gpmc_ncs0.gpio_50 */
|
|
poweroff_gpio: pinmux_poweroff_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
|
|
>;
|
|
};
|
|
|
|
/* kpd_row0.gpio_178 */
|
|
tmp105_irq: pinmux_tmp105_irq {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
|
|
>;
|
|
};
|
|
|
|
usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
|
|
/* gpio_60 */
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
|
|
>;
|
|
};
|
|
|
|
touchscreen_pins: pinmux_touchscreen_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
|
|
>;
|
|
};
|
|
|
|
usb_ulpi_pins: pinmux_usb_ulpi_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x196, MUX_MODE7)
|
|
OMAP4_IOPAD(0x198, MUX_MODE7)
|
|
OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
/* usb0_otg_dp and usb0_otg_dm */
|
|
usb_utmi_pins: pinmux_usb_utmi_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
|
|
OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
|
|
OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
/* uart3_tx_irtx and uart3_rx_irrx */
|
|
uart3_pins: pinmux_uart3_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x196, MUX_MODE7)
|
|
OMAP4_IOPAD(0x198, MUX_MODE7)
|
|
OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1ba, MUX_MODE2)
|
|
OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
|
|
OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
>;
|
|
};
|
|
};
|
|
|
|
&omap4_pmx_wkup {
|
|
usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
|
|
/* gpio_wk0 */
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
|
|
>;
|
|
};
|
|
};
|
|
|
|
&uart3 {
|
|
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
|
&omap4_pmx_core 0x17c>;
|
|
};
|
|
|
|
&usbhsehci {
|
|
phys = <&hsusb1_phy>;
|
|
};
|
|
|
|
&usbhshost {
|
|
port1-mode = "ohci-phy-4pin-dpdm";
|
|
port2-mode = "ehci-tll";
|
|
};
|
|
|
|
/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
|
|
&usb_otg_hs {
|
|
interface-type = <1>;
|
|
mode = <3>;
|
|
power = <50>;
|
|
};
|
|
|
|
&i2c4 {
|
|
ak8975: magnetometer@c {
|
|
compatible = "asahi-kasei,ak8975";
|
|
reg = <0x0c>;
|
|
|
|
vdd-supply = <&vhvio>;
|
|
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
|
|
|
|
rotation-matrix = "-1", "0", "0",
|
|
"0", "1", "0",
|
|
"0", "0", "-1";
|
|
|
|
};
|
|
|
|
lis3dh: accelerometer@18 {
|
|
compatible = "st,lis3dh-accel";
|
|
reg = <0x18>;
|
|
|
|
vdd-supply = <&vhvio>;
|
|
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
|
|
|
|
rotation-matrix = "0", "-1", "0",
|
|
"1", "0", "0",
|
|
"0", "0", "1";
|
|
};
|
|
};
|