mirror of https://gitee.com/openkylin/linux.git
2382 lines
78 KiB
C
2382 lines
78 KiB
C
#ifndef __NET_CFG80211_H
|
|
#define __NET_CFG80211_H
|
|
/*
|
|
* 802.11 device and configuration interface
|
|
*
|
|
* Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/list.h>
|
|
#include <linux/netlink.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/nl80211.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/ieee80211.h>
|
|
#include <net/regulatory.h>
|
|
|
|
/* remove once we remove the wext stuff */
|
|
#include <net/iw_handler.h>
|
|
#include <linux/wireless.h>
|
|
|
|
|
|
/*
|
|
* wireless hardware capability structures
|
|
*/
|
|
|
|
/**
|
|
* enum ieee80211_band - supported frequency bands
|
|
*
|
|
* The bands are assigned this way because the supported
|
|
* bitrates differ in these bands.
|
|
*
|
|
* @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
|
|
* @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
|
|
*/
|
|
enum ieee80211_band {
|
|
IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
|
|
IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
|
|
|
|
/* keep last */
|
|
IEEE80211_NUM_BANDS
|
|
};
|
|
|
|
/**
|
|
* enum ieee80211_channel_flags - channel flags
|
|
*
|
|
* Channel flags set by the regulatory control code.
|
|
*
|
|
* @IEEE80211_CHAN_DISABLED: This channel is disabled.
|
|
* @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
|
|
* on this channel.
|
|
* @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
|
|
* @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
|
|
* @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
|
|
* is not permitted.
|
|
* @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
|
|
* is not permitted.
|
|
*/
|
|
enum ieee80211_channel_flags {
|
|
IEEE80211_CHAN_DISABLED = 1<<0,
|
|
IEEE80211_CHAN_PASSIVE_SCAN = 1<<1,
|
|
IEEE80211_CHAN_NO_IBSS = 1<<2,
|
|
IEEE80211_CHAN_RADAR = 1<<3,
|
|
IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
|
|
IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
|
|
};
|
|
|
|
#define IEEE80211_CHAN_NO_HT40 \
|
|
(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
|
|
|
|
/**
|
|
* struct ieee80211_channel - channel definition
|
|
*
|
|
* This structure describes a single channel for use
|
|
* with cfg80211.
|
|
*
|
|
* @center_freq: center frequency in MHz
|
|
* @hw_value: hardware-specific value for the channel
|
|
* @flags: channel flags from &enum ieee80211_channel_flags.
|
|
* @orig_flags: channel flags at registration time, used by regulatory
|
|
* code to support devices with additional restrictions
|
|
* @band: band this channel belongs to.
|
|
* @max_antenna_gain: maximum antenna gain in dBi
|
|
* @max_power: maximum transmission power (in dBm)
|
|
* @beacon_found: helper to regulatory code to indicate when a beacon
|
|
* has been found on this channel. Use regulatory_hint_found_beacon()
|
|
* to enable this, this is is useful only on 5 GHz band.
|
|
* @orig_mag: internal use
|
|
* @orig_mpwr: internal use
|
|
*/
|
|
struct ieee80211_channel {
|
|
enum ieee80211_band band;
|
|
u16 center_freq;
|
|
u16 hw_value;
|
|
u32 flags;
|
|
int max_antenna_gain;
|
|
int max_power;
|
|
bool beacon_found;
|
|
u32 orig_flags;
|
|
int orig_mag, orig_mpwr;
|
|
};
|
|
|
|
/**
|
|
* enum ieee80211_rate_flags - rate flags
|
|
*
|
|
* Hardware/specification flags for rates. These are structured
|
|
* in a way that allows using the same bitrate structure for
|
|
* different bands/PHY modes.
|
|
*
|
|
* @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
|
|
* preamble on this bitrate; only relevant in 2.4GHz band and
|
|
* with CCK rates.
|
|
* @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
|
|
* when used with 802.11a (on the 5 GHz band); filled by the
|
|
* core code when registering the wiphy.
|
|
* @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
|
|
* when used with 802.11b (on the 2.4 GHz band); filled by the
|
|
* core code when registering the wiphy.
|
|
* @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
|
|
* when used with 802.11g (on the 2.4 GHz band); filled by the
|
|
* core code when registering the wiphy.
|
|
* @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
|
|
*/
|
|
enum ieee80211_rate_flags {
|
|
IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
|
|
IEEE80211_RATE_MANDATORY_A = 1<<1,
|
|
IEEE80211_RATE_MANDATORY_B = 1<<2,
|
|
IEEE80211_RATE_MANDATORY_G = 1<<3,
|
|
IEEE80211_RATE_ERP_G = 1<<4,
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_rate - bitrate definition
|
|
*
|
|
* This structure describes a bitrate that an 802.11 PHY can
|
|
* operate with. The two values @hw_value and @hw_value_short
|
|
* are only for driver use when pointers to this structure are
|
|
* passed around.
|
|
*
|
|
* @flags: rate-specific flags
|
|
* @bitrate: bitrate in units of 100 Kbps
|
|
* @hw_value: driver/hardware value for this rate
|
|
* @hw_value_short: driver/hardware value for this rate when
|
|
* short preamble is used
|
|
*/
|
|
struct ieee80211_rate {
|
|
u32 flags;
|
|
u16 bitrate;
|
|
u16 hw_value, hw_value_short;
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_sta_ht_cap - STA's HT capabilities
|
|
*
|
|
* This structure describes most essential parameters needed
|
|
* to describe 802.11n HT capabilities for an STA.
|
|
*
|
|
* @ht_supported: is HT supported by the STA
|
|
* @cap: HT capabilities map as described in 802.11n spec
|
|
* @ampdu_factor: Maximum A-MPDU length factor
|
|
* @ampdu_density: Minimum A-MPDU spacing
|
|
* @mcs: Supported MCS rates
|
|
*/
|
|
struct ieee80211_sta_ht_cap {
|
|
u16 cap; /* use IEEE80211_HT_CAP_ */
|
|
bool ht_supported;
|
|
u8 ampdu_factor;
|
|
u8 ampdu_density;
|
|
struct ieee80211_mcs_info mcs;
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_supported_band - frequency band definition
|
|
*
|
|
* This structure describes a frequency band a wiphy
|
|
* is able to operate in.
|
|
*
|
|
* @channels: Array of channels the hardware can operate in
|
|
* in this band.
|
|
* @band: the band this structure represents
|
|
* @n_channels: Number of channels in @channels
|
|
* @bitrates: Array of bitrates the hardware can operate with
|
|
* in this band. Must be sorted to give a valid "supported
|
|
* rates" IE, i.e. CCK rates first, then OFDM.
|
|
* @n_bitrates: Number of bitrates in @bitrates
|
|
*/
|
|
struct ieee80211_supported_band {
|
|
struct ieee80211_channel *channels;
|
|
struct ieee80211_rate *bitrates;
|
|
enum ieee80211_band band;
|
|
int n_channels;
|
|
int n_bitrates;
|
|
struct ieee80211_sta_ht_cap ht_cap;
|
|
};
|
|
|
|
/*
|
|
* Wireless hardware/device configuration structures and methods
|
|
*/
|
|
|
|
/**
|
|
* struct vif_params - describes virtual interface parameters
|
|
* @mesh_id: mesh ID to use
|
|
* @mesh_id_len: length of the mesh ID
|
|
* @use_4addr: use 4-address frames
|
|
*/
|
|
struct vif_params {
|
|
u8 *mesh_id;
|
|
int mesh_id_len;
|
|
int use_4addr;
|
|
};
|
|
|
|
/**
|
|
* struct key_params - key information
|
|
*
|
|
* Information about a key
|
|
*
|
|
* @key: key material
|
|
* @key_len: length of key material
|
|
* @cipher: cipher suite selector
|
|
* @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
|
|
* with the get_key() callback, must be in little endian,
|
|
* length given by @seq_len.
|
|
*/
|
|
struct key_params {
|
|
u8 *key;
|
|
u8 *seq;
|
|
int key_len;
|
|
int seq_len;
|
|
u32 cipher;
|
|
};
|
|
|
|
/**
|
|
* enum survey_info_flags - survey information flags
|
|
*
|
|
* Used by the driver to indicate which info in &struct survey_info
|
|
* it has filled in during the get_survey().
|
|
*/
|
|
enum survey_info_flags {
|
|
SURVEY_INFO_NOISE_DBM = 1<<0,
|
|
};
|
|
|
|
/**
|
|
* struct survey_info - channel survey response
|
|
*
|
|
* Used by dump_survey() to report back per-channel survey information.
|
|
*
|
|
* @channel: the channel this survey record reports, mandatory
|
|
* @filled: bitflag of flags from &enum survey_info_flags
|
|
* @noise: channel noise in dBm. This and all following fields are
|
|
* optional
|
|
*
|
|
* This structure can later be expanded with things like
|
|
* channel duty cycle etc.
|
|
*/
|
|
struct survey_info {
|
|
struct ieee80211_channel *channel;
|
|
u32 filled;
|
|
s8 noise;
|
|
};
|
|
|
|
/**
|
|
* struct beacon_parameters - beacon parameters
|
|
*
|
|
* Used to configure the beacon for an interface.
|
|
*
|
|
* @head: head portion of beacon (before TIM IE)
|
|
* or %NULL if not changed
|
|
* @tail: tail portion of beacon (after TIM IE)
|
|
* or %NULL if not changed
|
|
* @interval: beacon interval or zero if not changed
|
|
* @dtim_period: DTIM period or zero if not changed
|
|
* @head_len: length of @head
|
|
* @tail_len: length of @tail
|
|
*/
|
|
struct beacon_parameters {
|
|
u8 *head, *tail;
|
|
int interval, dtim_period;
|
|
int head_len, tail_len;
|
|
};
|
|
|
|
/**
|
|
* enum plink_action - actions to perform in mesh peers
|
|
*
|
|
* @PLINK_ACTION_INVALID: action 0 is reserved
|
|
* @PLINK_ACTION_OPEN: start mesh peer link establishment
|
|
* @PLINK_ACTION_BLOCL: block traffic from this mesh peer
|
|
*/
|
|
enum plink_actions {
|
|
PLINK_ACTION_INVALID,
|
|
PLINK_ACTION_OPEN,
|
|
PLINK_ACTION_BLOCK,
|
|
};
|
|
|
|
/**
|
|
* struct station_parameters - station parameters
|
|
*
|
|
* Used to change and create a new station.
|
|
*
|
|
* @vlan: vlan interface station should belong to
|
|
* @supported_rates: supported rates in IEEE 802.11 format
|
|
* (or NULL for no change)
|
|
* @supported_rates_len: number of supported rates
|
|
* @sta_flags_mask: station flags that changed
|
|
* (bitmask of BIT(NL80211_STA_FLAG_...))
|
|
* @sta_flags_set: station flags values
|
|
* (bitmask of BIT(NL80211_STA_FLAG_...))
|
|
* @listen_interval: listen interval or -1 for no change
|
|
* @aid: AID or zero for no change
|
|
*/
|
|
struct station_parameters {
|
|
u8 *supported_rates;
|
|
struct net_device *vlan;
|
|
u32 sta_flags_mask, sta_flags_set;
|
|
int listen_interval;
|
|
u16 aid;
|
|
u8 supported_rates_len;
|
|
u8 plink_action;
|
|
struct ieee80211_ht_cap *ht_capa;
|
|
};
|
|
|
|
/**
|
|
* enum station_info_flags - station information flags
|
|
*
|
|
* Used by the driver to indicate which info in &struct station_info
|
|
* it has filled in during get_station() or dump_station().
|
|
*
|
|
* @STATION_INFO_INACTIVE_TIME: @inactive_time filled
|
|
* @STATION_INFO_RX_BYTES: @rx_bytes filled
|
|
* @STATION_INFO_TX_BYTES: @tx_bytes filled
|
|
* @STATION_INFO_LLID: @llid filled
|
|
* @STATION_INFO_PLID: @plid filled
|
|
* @STATION_INFO_PLINK_STATE: @plink_state filled
|
|
* @STATION_INFO_SIGNAL: @signal filled
|
|
* @STATION_INFO_TX_BITRATE: @tx_bitrate fields are filled
|
|
* (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
|
|
* @STATION_INFO_RX_PACKETS: @rx_packets filled
|
|
* @STATION_INFO_TX_PACKETS: @tx_packets filled
|
|
*/
|
|
enum station_info_flags {
|
|
STATION_INFO_INACTIVE_TIME = 1<<0,
|
|
STATION_INFO_RX_BYTES = 1<<1,
|
|
STATION_INFO_TX_BYTES = 1<<2,
|
|
STATION_INFO_LLID = 1<<3,
|
|
STATION_INFO_PLID = 1<<4,
|
|
STATION_INFO_PLINK_STATE = 1<<5,
|
|
STATION_INFO_SIGNAL = 1<<6,
|
|
STATION_INFO_TX_BITRATE = 1<<7,
|
|
STATION_INFO_RX_PACKETS = 1<<8,
|
|
STATION_INFO_TX_PACKETS = 1<<9,
|
|
};
|
|
|
|
/**
|
|
* enum station_info_rate_flags - bitrate info flags
|
|
*
|
|
* Used by the driver to indicate the specific rate transmission
|
|
* type for 802.11n transmissions.
|
|
*
|
|
* @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
|
|
* @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
|
|
* @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
|
|
*/
|
|
enum rate_info_flags {
|
|
RATE_INFO_FLAGS_MCS = 1<<0,
|
|
RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1,
|
|
RATE_INFO_FLAGS_SHORT_GI = 1<<2,
|
|
};
|
|
|
|
/**
|
|
* struct rate_info - bitrate information
|
|
*
|
|
* Information about a receiving or transmitting bitrate
|
|
*
|
|
* @flags: bitflag of flags from &enum rate_info_flags
|
|
* @mcs: mcs index if struct describes a 802.11n bitrate
|
|
* @legacy: bitrate in 100kbit/s for 802.11abg
|
|
*/
|
|
struct rate_info {
|
|
u8 flags;
|
|
u8 mcs;
|
|
u16 legacy;
|
|
};
|
|
|
|
/**
|
|
* struct station_info - station information
|
|
*
|
|
* Station information filled by driver for get_station() and dump_station.
|
|
*
|
|
* @filled: bitflag of flags from &enum station_info_flags
|
|
* @inactive_time: time since last station activity (tx/rx) in milliseconds
|
|
* @rx_bytes: bytes received from this station
|
|
* @tx_bytes: bytes transmitted to this station
|
|
* @llid: mesh local link id
|
|
* @plid: mesh peer link id
|
|
* @plink_state: mesh peer link state
|
|
* @signal: signal strength of last received packet in dBm
|
|
* @txrate: current unicast bitrate to this station
|
|
* @rx_packets: packets received from this station
|
|
* @tx_packets: packets transmitted to this station
|
|
* @generation: generation number for nl80211 dumps.
|
|
* This number should increase every time the list of stations
|
|
* changes, i.e. when a station is added or removed, so that
|
|
* userspace can tell whether it got a consistent snapshot.
|
|
*/
|
|
struct station_info {
|
|
u32 filled;
|
|
u32 inactive_time;
|
|
u32 rx_bytes;
|
|
u32 tx_bytes;
|
|
u16 llid;
|
|
u16 plid;
|
|
u8 plink_state;
|
|
s8 signal;
|
|
struct rate_info txrate;
|
|
u32 rx_packets;
|
|
u32 tx_packets;
|
|
|
|
int generation;
|
|
};
|
|
|
|
/**
|
|
* enum monitor_flags - monitor flags
|
|
*
|
|
* Monitor interface configuration flags. Note that these must be the bits
|
|
* according to the nl80211 flags.
|
|
*
|
|
* @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
|
|
* @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
|
|
* @MONITOR_FLAG_CONTROL: pass control frames
|
|
* @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
|
|
* @MONITOR_FLAG_COOK_FRAMES: report frames after processing
|
|
*/
|
|
enum monitor_flags {
|
|
MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL,
|
|
MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL,
|
|
MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL,
|
|
MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS,
|
|
MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
|
|
};
|
|
|
|
/**
|
|
* enum mpath_info_flags - mesh path information flags
|
|
*
|
|
* Used by the driver to indicate which info in &struct mpath_info it has filled
|
|
* in during get_station() or dump_station().
|
|
*
|
|
* MPATH_INFO_FRAME_QLEN: @frame_qlen filled
|
|
* MPATH_INFO_SN: @sn filled
|
|
* MPATH_INFO_METRIC: @metric filled
|
|
* MPATH_INFO_EXPTIME: @exptime filled
|
|
* MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
|
|
* MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
|
|
* MPATH_INFO_FLAGS: @flags filled
|
|
*/
|
|
enum mpath_info_flags {
|
|
MPATH_INFO_FRAME_QLEN = BIT(0),
|
|
MPATH_INFO_SN = BIT(1),
|
|
MPATH_INFO_METRIC = BIT(2),
|
|
MPATH_INFO_EXPTIME = BIT(3),
|
|
MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4),
|
|
MPATH_INFO_DISCOVERY_RETRIES = BIT(5),
|
|
MPATH_INFO_FLAGS = BIT(6),
|
|
};
|
|
|
|
/**
|
|
* struct mpath_info - mesh path information
|
|
*
|
|
* Mesh path information filled by driver for get_mpath() and dump_mpath().
|
|
*
|
|
* @filled: bitfield of flags from &enum mpath_info_flags
|
|
* @frame_qlen: number of queued frames for this destination
|
|
* @sn: target sequence number
|
|
* @metric: metric (cost) of this mesh path
|
|
* @exptime: expiration time for the mesh path from now, in msecs
|
|
* @flags: mesh path flags
|
|
* @discovery_timeout: total mesh path discovery timeout, in msecs
|
|
* @discovery_retries: mesh path discovery retries
|
|
* @generation: generation number for nl80211 dumps.
|
|
* This number should increase every time the list of mesh paths
|
|
* changes, i.e. when a station is added or removed, so that
|
|
* userspace can tell whether it got a consistent snapshot.
|
|
*/
|
|
struct mpath_info {
|
|
u32 filled;
|
|
u32 frame_qlen;
|
|
u32 sn;
|
|
u32 metric;
|
|
u32 exptime;
|
|
u32 discovery_timeout;
|
|
u8 discovery_retries;
|
|
u8 flags;
|
|
|
|
int generation;
|
|
};
|
|
|
|
/**
|
|
* struct bss_parameters - BSS parameters
|
|
*
|
|
* Used to change BSS parameters (mainly for AP mode).
|
|
*
|
|
* @use_cts_prot: Whether to use CTS protection
|
|
* (0 = no, 1 = yes, -1 = do not change)
|
|
* @use_short_preamble: Whether the use of short preambles is allowed
|
|
* (0 = no, 1 = yes, -1 = do not change)
|
|
* @use_short_slot_time: Whether the use of short slot time is allowed
|
|
* (0 = no, 1 = yes, -1 = do not change)
|
|
* @basic_rates: basic rates in IEEE 802.11 format
|
|
* (or NULL for no change)
|
|
* @basic_rates_len: number of basic rates
|
|
* @ap_isolate: do not forward packets between connected stations
|
|
*/
|
|
struct bss_parameters {
|
|
int use_cts_prot;
|
|
int use_short_preamble;
|
|
int use_short_slot_time;
|
|
u8 *basic_rates;
|
|
u8 basic_rates_len;
|
|
int ap_isolate;
|
|
};
|
|
|
|
struct mesh_config {
|
|
/* Timeouts in ms */
|
|
/* Mesh plink management parameters */
|
|
u16 dot11MeshRetryTimeout;
|
|
u16 dot11MeshConfirmTimeout;
|
|
u16 dot11MeshHoldingTimeout;
|
|
u16 dot11MeshMaxPeerLinks;
|
|
u8 dot11MeshMaxRetries;
|
|
u8 dot11MeshTTL;
|
|
bool auto_open_plinks;
|
|
/* HWMP parameters */
|
|
u8 dot11MeshHWMPmaxPREQretries;
|
|
u32 path_refresh_time;
|
|
u16 min_discovery_timeout;
|
|
u32 dot11MeshHWMPactivePathTimeout;
|
|
u16 dot11MeshHWMPpreqMinInterval;
|
|
u16 dot11MeshHWMPnetDiameterTraversalTime;
|
|
u8 dot11MeshHWMPRootMode;
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_txq_params - TX queue parameters
|
|
* @queue: TX queue identifier (NL80211_TXQ_Q_*)
|
|
* @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
|
|
* @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
|
|
* 1..32767]
|
|
* @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
|
|
* 1..32767]
|
|
* @aifs: Arbitration interframe space [0..255]
|
|
*/
|
|
struct ieee80211_txq_params {
|
|
enum nl80211_txq_q queue;
|
|
u16 txop;
|
|
u16 cwmin;
|
|
u16 cwmax;
|
|
u8 aifs;
|
|
};
|
|
|
|
/* from net/wireless.h */
|
|
struct wiphy;
|
|
|
|
/* from net/ieee80211.h */
|
|
struct ieee80211_channel;
|
|
|
|
/**
|
|
* struct cfg80211_ssid - SSID description
|
|
* @ssid: the SSID
|
|
* @ssid_len: length of the ssid
|
|
*/
|
|
struct cfg80211_ssid {
|
|
u8 ssid[IEEE80211_MAX_SSID_LEN];
|
|
u8 ssid_len;
|
|
};
|
|
|
|
/**
|
|
* struct cfg80211_scan_request - scan request description
|
|
*
|
|
* @ssids: SSIDs to scan for (active scan only)
|
|
* @n_ssids: number of SSIDs
|
|
* @channels: channels to scan on.
|
|
* @n_channels: total number of channels to scan
|
|
* @ie: optional information element(s) to add into Probe Request or %NULL
|
|
* @ie_len: length of ie in octets
|
|
* @wiphy: the wiphy this was for
|
|
* @dev: the interface
|
|
*/
|
|
struct cfg80211_scan_request {
|
|
struct cfg80211_ssid *ssids;
|
|
int n_ssids;
|
|
u32 n_channels;
|
|
const u8 *ie;
|
|
size_t ie_len;
|
|
|
|
/* internal */
|
|
struct wiphy *wiphy;
|
|
struct net_device *dev;
|
|
bool aborted;
|
|
|
|
/* keep last */
|
|
struct ieee80211_channel *channels[0];
|
|
};
|
|
|
|
/**
|
|
* enum cfg80211_signal_type - signal type
|
|
*
|
|
* @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
|
|
* @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
|
|
* @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
|
|
*/
|
|
enum cfg80211_signal_type {
|
|
CFG80211_SIGNAL_TYPE_NONE,
|
|
CFG80211_SIGNAL_TYPE_MBM,
|
|
CFG80211_SIGNAL_TYPE_UNSPEC,
|
|
};
|
|
|
|
/**
|
|
* struct cfg80211_bss - BSS description
|
|
*
|
|
* This structure describes a BSS (which may also be a mesh network)
|
|
* for use in scan results and similar.
|
|
*
|
|
* @bssid: BSSID of the BSS
|
|
* @tsf: timestamp of last received update
|
|
* @beacon_interval: the beacon interval as from the frame
|
|
* @capability: the capability field in host byte order
|
|
* @information_elements: the information elements (Note that there
|
|
* is no guarantee that these are well-formed!); this is a pointer to
|
|
* either the beacon_ies or proberesp_ies depending on whether Probe
|
|
* Response frame has been received
|
|
* @len_information_elements: total length of the information elements
|
|
* @beacon_ies: the information elements from the last Beacon frame
|
|
* @len_beacon_ies: total length of the beacon_ies
|
|
* @proberesp_ies: the information elements from the last Probe Response frame
|
|
* @len_proberesp_ies: total length of the proberesp_ies
|
|
* @signal: signal strength value (type depends on the wiphy's signal_type)
|
|
* @free_priv: function pointer to free private data
|
|
* @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
|
|
*/
|
|
struct cfg80211_bss {
|
|
struct ieee80211_channel *channel;
|
|
|
|
u8 bssid[ETH_ALEN];
|
|
u64 tsf;
|
|
u16 beacon_interval;
|
|
u16 capability;
|
|
u8 *information_elements;
|
|
size_t len_information_elements;
|
|
u8 *beacon_ies;
|
|
size_t len_beacon_ies;
|
|
u8 *proberesp_ies;
|
|
size_t len_proberesp_ies;
|
|
|
|
s32 signal;
|
|
|
|
void (*free_priv)(struct cfg80211_bss *bss);
|
|
u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
|
|
};
|
|
|
|
/**
|
|
* ieee80211_bss_get_ie - find IE with given ID
|
|
* @bss: the bss to search
|
|
* @ie: the IE ID
|
|
* Returns %NULL if not found.
|
|
*/
|
|
const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
|
|
|
|
|
|
/**
|
|
* struct cfg80211_crypto_settings - Crypto settings
|
|
* @wpa_versions: indicates which, if any, WPA versions are enabled
|
|
* (from enum nl80211_wpa_versions)
|
|
* @cipher_group: group key cipher suite (or 0 if unset)
|
|
* @n_ciphers_pairwise: number of AP supported unicast ciphers
|
|
* @ciphers_pairwise: unicast key cipher suites
|
|
* @n_akm_suites: number of AKM suites
|
|
* @akm_suites: AKM suites
|
|
* @control_port: Whether user space controls IEEE 802.1X port, i.e.,
|
|
* sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
|
|
* required to assume that the port is unauthorized until authorized by
|
|
* user space. Otherwise, port is marked authorized by default.
|
|
*/
|
|
struct cfg80211_crypto_settings {
|
|
u32 wpa_versions;
|
|
u32 cipher_group;
|
|
int n_ciphers_pairwise;
|
|
u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
|
|
int n_akm_suites;
|
|
u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
|
|
bool control_port;
|
|
};
|
|
|
|
/**
|
|
* struct cfg80211_auth_request - Authentication request data
|
|
*
|
|
* This structure provides information needed to complete IEEE 802.11
|
|
* authentication.
|
|
*
|
|
* @bss: The BSS to authenticate with.
|
|
* @auth_type: Authentication type (algorithm)
|
|
* @ie: Extra IEs to add to Authentication frame or %NULL
|
|
* @ie_len: Length of ie buffer in octets
|
|
* @key_len: length of WEP key for shared key authentication
|
|
* @key_idx: index of WEP key for shared key authentication
|
|
* @key: WEP key for shared key authentication
|
|
* @local_state_change: This is a request for a local state only, i.e., no
|
|
* Authentication frame is to be transmitted and authentication state is
|
|
* to be changed without having to wait for a response from the peer STA
|
|
* (AP).
|
|
*/
|
|
struct cfg80211_auth_request {
|
|
struct cfg80211_bss *bss;
|
|
const u8 *ie;
|
|
size_t ie_len;
|
|
enum nl80211_auth_type auth_type;
|
|
const u8 *key;
|
|
u8 key_len, key_idx;
|
|
bool local_state_change;
|
|
};
|
|
|
|
/**
|
|
* struct cfg80211_assoc_request - (Re)Association request data
|
|
*
|
|
* This structure provides information needed to complete IEEE 802.11
|
|
* (re)association.
|
|
* @bss: The BSS to associate with.
|
|
* @ie: Extra IEs to add to (Re)Association Request frame or %NULL
|
|
* @ie_len: Length of ie buffer in octets
|
|
* @use_mfp: Use management frame protection (IEEE 802.11w) in this association
|
|
* @crypto: crypto settings
|
|
* @prev_bssid: previous BSSID, if not %NULL use reassociate frame
|
|
*/
|
|
struct cfg80211_assoc_request {
|
|
struct cfg80211_bss *bss;
|
|
const u8 *ie, *prev_bssid;
|
|
size_t ie_len;
|
|
struct cfg80211_crypto_settings crypto;
|
|
bool use_mfp;
|
|
};
|
|
|
|
/**
|
|
* struct cfg80211_deauth_request - Deauthentication request data
|
|
*
|
|
* This structure provides information needed to complete IEEE 802.11
|
|
* deauthentication.
|
|
*
|
|
* @bss: the BSS to deauthenticate from
|
|
* @ie: Extra IEs to add to Deauthentication frame or %NULL
|
|
* @ie_len: Length of ie buffer in octets
|
|
* @reason_code: The reason code for the deauthentication
|
|
* @local_state_change: This is a request for a local state only, i.e., no
|
|
* Deauthentication frame is to be transmitted.
|
|
*/
|
|
struct cfg80211_deauth_request {
|
|
struct cfg80211_bss *bss;
|
|
const u8 *ie;
|
|
size_t ie_len;
|
|
u16 reason_code;
|
|
bool local_state_change;
|
|
};
|
|
|
|
/**
|
|
* struct cfg80211_disassoc_request - Disassociation request data
|
|
*
|
|
* This structure provides information needed to complete IEEE 802.11
|
|
* disassocation.
|
|
*
|
|
* @bss: the BSS to disassociate from
|
|
* @ie: Extra IEs to add to Disassociation frame or %NULL
|
|
* @ie_len: Length of ie buffer in octets
|
|
* @reason_code: The reason code for the disassociation
|
|
* @local_state_change: This is a request for a local state only, i.e., no
|
|
* Disassociation frame is to be transmitted.
|
|
*/
|
|
struct cfg80211_disassoc_request {
|
|
struct cfg80211_bss *bss;
|
|
const u8 *ie;
|
|
size_t ie_len;
|
|
u16 reason_code;
|
|
bool local_state_change;
|
|
};
|
|
|
|
/**
|
|
* struct cfg80211_ibss_params - IBSS parameters
|
|
*
|
|
* This structure defines the IBSS parameters for the join_ibss()
|
|
* method.
|
|
*
|
|
* @ssid: The SSID, will always be non-null.
|
|
* @ssid_len: The length of the SSID, will always be non-zero.
|
|
* @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
|
|
* search for IBSSs with a different BSSID.
|
|
* @channel: The channel to use if no IBSS can be found to join.
|
|
* @channel_fixed: The channel should be fixed -- do not search for
|
|
* IBSSs to join on other channels.
|
|
* @ie: information element(s) to include in the beacon
|
|
* @ie_len: length of that
|
|
* @beacon_interval: beacon interval to use
|
|
* @privacy: this is a protected network, keys will be configured
|
|
* after joining
|
|
*/
|
|
struct cfg80211_ibss_params {
|
|
u8 *ssid;
|
|
u8 *bssid;
|
|
struct ieee80211_channel *channel;
|
|
u8 *ie;
|
|
u8 ssid_len, ie_len;
|
|
u16 beacon_interval;
|
|
bool channel_fixed;
|
|
bool privacy;
|
|
};
|
|
|
|
/**
|
|
* struct cfg80211_connect_params - Connection parameters
|
|
*
|
|
* This structure provides information needed to complete IEEE 802.11
|
|
* authentication and association.
|
|
*
|
|
* @channel: The channel to use or %NULL if not specified (auto-select based
|
|
* on scan results)
|
|
* @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
|
|
* results)
|
|
* @ssid: SSID
|
|
* @ssid_len: Length of ssid in octets
|
|
* @auth_type: Authentication type (algorithm)
|
|
* @assoc_ie: IEs for association request
|
|
* @assoc_ie_len: Length of assoc_ie in octets
|
|
* @privacy: indicates whether privacy-enabled APs should be used
|
|
* @crypto: crypto settings
|
|
* @key_len: length of WEP key for shared key authentication
|
|
* @key_idx: index of WEP key for shared key authentication
|
|
* @key: WEP key for shared key authentication
|
|
*/
|
|
struct cfg80211_connect_params {
|
|
struct ieee80211_channel *channel;
|
|
u8 *bssid;
|
|
u8 *ssid;
|
|
size_t ssid_len;
|
|
enum nl80211_auth_type auth_type;
|
|
u8 *ie;
|
|
size_t ie_len;
|
|
bool privacy;
|
|
struct cfg80211_crypto_settings crypto;
|
|
const u8 *key;
|
|
u8 key_len, key_idx;
|
|
};
|
|
|
|
/**
|
|
* enum wiphy_params_flags - set_wiphy_params bitfield values
|
|
* WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
|
|
* WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
|
|
* WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
|
|
* WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
|
|
*/
|
|
enum wiphy_params_flags {
|
|
WIPHY_PARAM_RETRY_SHORT = 1 << 0,
|
|
WIPHY_PARAM_RETRY_LONG = 1 << 1,
|
|
WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2,
|
|
WIPHY_PARAM_RTS_THRESHOLD = 1 << 3,
|
|
WIPHY_PARAM_COVERAGE_CLASS = 1 << 4,
|
|
};
|
|
|
|
/**
|
|
* enum tx_power_setting - TX power adjustment
|
|
*
|
|
* @TX_POWER_AUTOMATIC: the dbm parameter is ignored
|
|
* @TX_POWER_LIMITED: limit TX power by the dbm parameter
|
|
* @TX_POWER_FIXED: fix TX power to the dbm parameter
|
|
*/
|
|
enum tx_power_setting {
|
|
TX_POWER_AUTOMATIC,
|
|
TX_POWER_LIMITED,
|
|
TX_POWER_FIXED,
|
|
};
|
|
|
|
/*
|
|
* cfg80211_bitrate_mask - masks for bitrate control
|
|
*/
|
|
struct cfg80211_bitrate_mask {
|
|
struct {
|
|
u32 legacy;
|
|
/* TODO: add support for masking MCS rates; e.g.: */
|
|
/* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
|
|
} control[IEEE80211_NUM_BANDS];
|
|
};
|
|
/**
|
|
* struct cfg80211_pmksa - PMK Security Association
|
|
*
|
|
* This structure is passed to the set/del_pmksa() method for PMKSA
|
|
* caching.
|
|
*
|
|
* @bssid: The AP's BSSID.
|
|
* @pmkid: The PMK material itself.
|
|
*/
|
|
struct cfg80211_pmksa {
|
|
u8 *bssid;
|
|
u8 *pmkid;
|
|
};
|
|
|
|
/**
|
|
* struct cfg80211_ops - backend description for wireless configuration
|
|
*
|
|
* This struct is registered by fullmac card drivers and/or wireless stacks
|
|
* in order to handle configuration requests on their interfaces.
|
|
*
|
|
* All callbacks except where otherwise noted should return 0
|
|
* on success or a negative error code.
|
|
*
|
|
* All operations are currently invoked under rtnl for consistency with the
|
|
* wireless extensions but this is subject to reevaluation as soon as this
|
|
* code is used more widely and we have a first user without wext.
|
|
*
|
|
* @suspend: wiphy device needs to be suspended
|
|
* @resume: wiphy device needs to be resumed
|
|
*
|
|
* @add_virtual_intf: create a new virtual interface with the given name,
|
|
* must set the struct wireless_dev's iftype. Beware: You must create
|
|
* the new netdev in the wiphy's network namespace!
|
|
*
|
|
* @del_virtual_intf: remove the virtual interface determined by ifindex.
|
|
*
|
|
* @change_virtual_intf: change type/configuration of virtual interface,
|
|
* keep the struct wireless_dev's iftype updated.
|
|
*
|
|
* @add_key: add a key with the given parameters. @mac_addr will be %NULL
|
|
* when adding a group key.
|
|
*
|
|
* @get_key: get information about the key with the given parameters.
|
|
* @mac_addr will be %NULL when requesting information for a group
|
|
* key. All pointers given to the @callback function need not be valid
|
|
* after it returns. This function should return an error if it is
|
|
* not possible to retrieve the key, -ENOENT if it doesn't exist.
|
|
*
|
|
* @del_key: remove a key given the @mac_addr (%NULL for a group key)
|
|
* and @key_index, return -ENOENT if the key doesn't exist.
|
|
*
|
|
* @set_default_key: set the default key on an interface
|
|
*
|
|
* @set_default_mgmt_key: set the default management frame key on an interface
|
|
*
|
|
* @add_beacon: Add a beacon with given parameters, @head, @interval
|
|
* and @dtim_period will be valid, @tail is optional.
|
|
* @set_beacon: Change the beacon parameters for an access point mode
|
|
* interface. This should reject the call when no beacon has been
|
|
* configured.
|
|
* @del_beacon: Remove beacon configuration and stop sending the beacon.
|
|
*
|
|
* @add_station: Add a new station.
|
|
*
|
|
* @del_station: Remove a station; @mac may be NULL to remove all stations.
|
|
*
|
|
* @change_station: Modify a given station.
|
|
*
|
|
* @get_mesh_params: Put the current mesh parameters into *params
|
|
*
|
|
* @set_mesh_params: Set mesh parameters.
|
|
* The mask is a bitfield which tells us which parameters to
|
|
* set, and which to leave alone.
|
|
*
|
|
* @set_mesh_cfg: set mesh parameters (by now, just mesh id)
|
|
*
|
|
* @change_bss: Modify parameters for a given BSS.
|
|
*
|
|
* @set_txq_params: Set TX queue parameters
|
|
*
|
|
* @set_channel: Set channel for a given wireless interface. Some devices
|
|
* may support multi-channel operation (by channel hopping) so cfg80211
|
|
* doesn't verify much. Note, however, that the passed netdev may be
|
|
* %NULL as well if the user requested changing the channel for the
|
|
* device itself, or for a monitor interface.
|
|
*
|
|
* @scan: Request to do a scan. If returning zero, the scan request is given
|
|
* the driver, and will be valid until passed to cfg80211_scan_done().
|
|
* For scan results, call cfg80211_inform_bss(); you can call this outside
|
|
* the scan/scan_done bracket too.
|
|
*
|
|
* @auth: Request to authenticate with the specified peer
|
|
* @assoc: Request to (re)associate with the specified peer
|
|
* @deauth: Request to deauthenticate from the specified peer
|
|
* @disassoc: Request to disassociate from the specified peer
|
|
*
|
|
* @connect: Connect to the ESS with the specified parameters. When connected,
|
|
* call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
|
|
* If the connection fails for some reason, call cfg80211_connect_result()
|
|
* with the status from the AP.
|
|
* @disconnect: Disconnect from the BSS/ESS.
|
|
*
|
|
* @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
|
|
* cfg80211_ibss_joined(), also call that function when changing BSSID due
|
|
* to a merge.
|
|
* @leave_ibss: Leave the IBSS.
|
|
*
|
|
* @set_wiphy_params: Notify that wiphy parameters have changed;
|
|
* @changed bitfield (see &enum wiphy_params_flags) describes which values
|
|
* have changed. The actual parameter values are available in
|
|
* struct wiphy. If returning an error, no value should be changed.
|
|
*
|
|
* @set_tx_power: set the transmit power according to the parameters
|
|
* @get_tx_power: store the current TX power into the dbm variable;
|
|
* return 0 if successful
|
|
*
|
|
* @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
|
|
* functions to adjust rfkill hw state
|
|
*
|
|
* @dump_survey: get site survey information.
|
|
*
|
|
* @remain_on_channel: Request the driver to remain awake on the specified
|
|
* channel for the specified duration to complete an off-channel
|
|
* operation (e.g., public action frame exchange). When the driver is
|
|
* ready on the requested channel, it must indicate this with an event
|
|
* notification by calling cfg80211_ready_on_channel().
|
|
* @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
|
|
* This allows the operation to be terminated prior to timeout based on
|
|
* the duration value.
|
|
* @action: Transmit an action frame
|
|
*
|
|
* @testmode_cmd: run a test mode command
|
|
*
|
|
* @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
|
|
* devices running firmwares capable of generating the (re) association
|
|
* RSN IE. It allows for faster roaming between WPA2 BSSIDs.
|
|
* @del_pmksa: Delete a cached PMKID.
|
|
* @flush_pmksa: Flush all cached PMKIDs.
|
|
* @set_power_mgmt: Configure WLAN power management. A timeout value of -1
|
|
* allows the driver to adjust the dynamic ps timeout value.
|
|
* @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
|
|
*
|
|
*/
|
|
struct cfg80211_ops {
|
|
int (*suspend)(struct wiphy *wiphy);
|
|
int (*resume)(struct wiphy *wiphy);
|
|
|
|
int (*add_virtual_intf)(struct wiphy *wiphy, char *name,
|
|
enum nl80211_iftype type, u32 *flags,
|
|
struct vif_params *params);
|
|
int (*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev);
|
|
int (*change_virtual_intf)(struct wiphy *wiphy,
|
|
struct net_device *dev,
|
|
enum nl80211_iftype type, u32 *flags,
|
|
struct vif_params *params);
|
|
|
|
int (*add_key)(struct wiphy *wiphy, struct net_device *netdev,
|
|
u8 key_index, const u8 *mac_addr,
|
|
struct key_params *params);
|
|
int (*get_key)(struct wiphy *wiphy, struct net_device *netdev,
|
|
u8 key_index, const u8 *mac_addr, void *cookie,
|
|
void (*callback)(void *cookie, struct key_params*));
|
|
int (*del_key)(struct wiphy *wiphy, struct net_device *netdev,
|
|
u8 key_index, const u8 *mac_addr);
|
|
int (*set_default_key)(struct wiphy *wiphy,
|
|
struct net_device *netdev,
|
|
u8 key_index);
|
|
int (*set_default_mgmt_key)(struct wiphy *wiphy,
|
|
struct net_device *netdev,
|
|
u8 key_index);
|
|
|
|
int (*add_beacon)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct beacon_parameters *info);
|
|
int (*set_beacon)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct beacon_parameters *info);
|
|
int (*del_beacon)(struct wiphy *wiphy, struct net_device *dev);
|
|
|
|
|
|
int (*add_station)(struct wiphy *wiphy, struct net_device *dev,
|
|
u8 *mac, struct station_parameters *params);
|
|
int (*del_station)(struct wiphy *wiphy, struct net_device *dev,
|
|
u8 *mac);
|
|
int (*change_station)(struct wiphy *wiphy, struct net_device *dev,
|
|
u8 *mac, struct station_parameters *params);
|
|
int (*get_station)(struct wiphy *wiphy, struct net_device *dev,
|
|
u8 *mac, struct station_info *sinfo);
|
|
int (*dump_station)(struct wiphy *wiphy, struct net_device *dev,
|
|
int idx, u8 *mac, struct station_info *sinfo);
|
|
|
|
int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev,
|
|
u8 *dst, u8 *next_hop);
|
|
int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev,
|
|
u8 *dst);
|
|
int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev,
|
|
u8 *dst, u8 *next_hop);
|
|
int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev,
|
|
u8 *dst, u8 *next_hop,
|
|
struct mpath_info *pinfo);
|
|
int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
|
|
int idx, u8 *dst, u8 *next_hop,
|
|
struct mpath_info *pinfo);
|
|
int (*get_mesh_params)(struct wiphy *wiphy,
|
|
struct net_device *dev,
|
|
struct mesh_config *conf);
|
|
int (*set_mesh_params)(struct wiphy *wiphy,
|
|
struct net_device *dev,
|
|
const struct mesh_config *nconf, u32 mask);
|
|
int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct bss_parameters *params);
|
|
|
|
int (*set_txq_params)(struct wiphy *wiphy,
|
|
struct ieee80211_txq_params *params);
|
|
|
|
int (*set_channel)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct ieee80211_channel *chan,
|
|
enum nl80211_channel_type channel_type);
|
|
|
|
int (*scan)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct cfg80211_scan_request *request);
|
|
|
|
int (*auth)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct cfg80211_auth_request *req);
|
|
int (*assoc)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct cfg80211_assoc_request *req);
|
|
int (*deauth)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct cfg80211_deauth_request *req,
|
|
void *cookie);
|
|
int (*disassoc)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct cfg80211_disassoc_request *req,
|
|
void *cookie);
|
|
|
|
int (*connect)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct cfg80211_connect_params *sme);
|
|
int (*disconnect)(struct wiphy *wiphy, struct net_device *dev,
|
|
u16 reason_code);
|
|
|
|
int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct cfg80211_ibss_params *params);
|
|
int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
|
|
|
|
int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
|
|
|
|
int (*set_tx_power)(struct wiphy *wiphy,
|
|
enum tx_power_setting type, int dbm);
|
|
int (*get_tx_power)(struct wiphy *wiphy, int *dbm);
|
|
|
|
int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev,
|
|
u8 *addr);
|
|
|
|
void (*rfkill_poll)(struct wiphy *wiphy);
|
|
|
|
#ifdef CONFIG_NL80211_TESTMODE
|
|
int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
|
|
#endif
|
|
|
|
int (*set_bitrate_mask)(struct wiphy *wiphy,
|
|
struct net_device *dev,
|
|
const u8 *peer,
|
|
const struct cfg80211_bitrate_mask *mask);
|
|
|
|
int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev,
|
|
int idx, struct survey_info *info);
|
|
|
|
int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
|
|
struct cfg80211_pmksa *pmksa);
|
|
int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
|
|
struct cfg80211_pmksa *pmksa);
|
|
int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
|
|
|
|
int (*remain_on_channel)(struct wiphy *wiphy,
|
|
struct net_device *dev,
|
|
struct ieee80211_channel *chan,
|
|
enum nl80211_channel_type channel_type,
|
|
unsigned int duration,
|
|
u64 *cookie);
|
|
int (*cancel_remain_on_channel)(struct wiphy *wiphy,
|
|
struct net_device *dev,
|
|
u64 cookie);
|
|
|
|
int (*action)(struct wiphy *wiphy, struct net_device *dev,
|
|
struct ieee80211_channel *chan,
|
|
enum nl80211_channel_type channel_type,
|
|
const u8 *buf, size_t len, u64 *cookie);
|
|
|
|
int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
|
|
bool enabled, int timeout);
|
|
|
|
int (*set_cqm_rssi_config)(struct wiphy *wiphy,
|
|
struct net_device *dev,
|
|
s32 rssi_thold, u32 rssi_hyst);
|
|
};
|
|
|
|
/*
|
|
* wireless hardware and networking interfaces structures
|
|
* and registration/helper functions
|
|
*/
|
|
|
|
/**
|
|
* enum wiphy_flags - wiphy capability flags
|
|
*
|
|
* @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device
|
|
* has its own custom regulatory domain and cannot identify the
|
|
* ISO / IEC 3166 alpha2 it belongs to. When this is enabled
|
|
* we will disregard the first regulatory hint (when the
|
|
* initiator is %REGDOM_SET_BY_CORE).
|
|
* @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
|
|
* ignore regulatory domain settings until it gets its own regulatory
|
|
* domain via its regulatory_hint(). After its gets its own regulatory
|
|
* domain it will only allow further regulatory domain settings to
|
|
* further enhance compliance. For example if channel 13 and 14 are
|
|
* disabled by this regulatory domain no user regulatory domain can
|
|
* enable these channels at a later time. This can be used for devices
|
|
* which do not have calibration information gauranteed for frequencies
|
|
* or settings outside of its regulatory domain.
|
|
* @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
|
|
* that passive scan flags and beaconing flags may not be lifted by
|
|
* cfg80211 due to regulatory beacon hints. For more information on beacon
|
|
* hints read the documenation for regulatory_hint_found_beacon()
|
|
* @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
|
|
* wiphy at all
|
|
* @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
|
|
* by default -- this flag will be set depending on the kernel's default
|
|
* on wiphy_new(), but can be changed by the driver if it has a good
|
|
* reason to override the default
|
|
* @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
|
|
* on a VLAN interface)
|
|
* @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
|
|
*/
|
|
enum wiphy_flags {
|
|
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
|
|
WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
|
|
WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
|
|
WIPHY_FLAG_NETNS_OK = BIT(3),
|
|
WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
|
|
WIPHY_FLAG_4ADDR_AP = BIT(5),
|
|
WIPHY_FLAG_4ADDR_STATION = BIT(6),
|
|
};
|
|
|
|
struct mac_address {
|
|
u8 addr[ETH_ALEN];
|
|
};
|
|
|
|
/**
|
|
* struct wiphy - wireless hardware description
|
|
* @idx: the wiphy index assigned to this item
|
|
* @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
|
|
* @reg_notifier: the driver's regulatory notification callback
|
|
* @regd: the driver's regulatory domain, if one was requested via
|
|
* the regulatory_hint() API. This can be used by the driver
|
|
* on the reg_notifier() if it chooses to ignore future
|
|
* regulatory domain changes caused by other drivers.
|
|
* @signal_type: signal type reported in &struct cfg80211_bss.
|
|
* @cipher_suites: supported cipher suites
|
|
* @n_cipher_suites: number of supported cipher suites
|
|
* @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
|
|
* @retry_long: Retry limit for long frames (dot11LongRetryLimit)
|
|
* @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
|
|
* -1 = fragmentation disabled, only odd values >= 256 used
|
|
* @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
|
|
* @net: the network namespace this wiphy currently lives in
|
|
* @perm_addr: permanent MAC address of this device
|
|
* @addr_mask: If the device supports multiple MAC addresses by masking,
|
|
* set this to a mask with variable bits set to 1, e.g. if the last
|
|
* four bits are variable then set it to 00:...:00:0f. The actual
|
|
* variable bits shall be determined by the interfaces added, with
|
|
* interfaces not matching the mask being rejected to be brought up.
|
|
* @n_addresses: number of addresses in @addresses.
|
|
* @addresses: If the device has more than one address, set this pointer
|
|
* to a list of addresses (6 bytes each). The first one will be used
|
|
* by default for perm_addr. In this case, the mask should be set to
|
|
* all-zeroes. In this case it is assumed that the device can handle
|
|
* the same number of arbitrary MAC addresses.
|
|
*/
|
|
struct wiphy {
|
|
/* assign these fields before you register the wiphy */
|
|
|
|
/* permanent MAC address(es) */
|
|
u8 perm_addr[ETH_ALEN];
|
|
u8 addr_mask[ETH_ALEN];
|
|
|
|
u16 n_addresses;
|
|
struct mac_address *addresses;
|
|
|
|
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
|
|
u16 interface_modes;
|
|
|
|
u32 flags;
|
|
|
|
enum cfg80211_signal_type signal_type;
|
|
|
|
int bss_priv_size;
|
|
u8 max_scan_ssids;
|
|
u16 max_scan_ie_len;
|
|
|
|
int n_cipher_suites;
|
|
const u32 *cipher_suites;
|
|
|
|
u8 retry_short;
|
|
u8 retry_long;
|
|
u32 frag_threshold;
|
|
u32 rts_threshold;
|
|
u8 coverage_class;
|
|
|
|
char fw_version[ETHTOOL_BUSINFO_LEN];
|
|
u32 hw_version;
|
|
|
|
u8 max_num_pmkids;
|
|
|
|
/* If multiple wiphys are registered and you're handed e.g.
|
|
* a regular netdev with assigned ieee80211_ptr, you won't
|
|
* know whether it points to a wiphy your driver has registered
|
|
* or not. Assign this to something global to your driver to
|
|
* help determine whether you own this wiphy or not. */
|
|
const void *privid;
|
|
|
|
struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
|
|
|
|
/* Lets us get back the wiphy on the callback */
|
|
int (*reg_notifier)(struct wiphy *wiphy,
|
|
struct regulatory_request *request);
|
|
|
|
/* fields below are read-only, assigned by cfg80211 */
|
|
|
|
const struct ieee80211_regdomain *regd;
|
|
|
|
/* the item in /sys/class/ieee80211/ points to this,
|
|
* you need use set_wiphy_dev() (see below) */
|
|
struct device dev;
|
|
|
|
/* dir in debugfs: ieee80211/<wiphyname> */
|
|
struct dentry *debugfsdir;
|
|
|
|
#ifdef CONFIG_NET_NS
|
|
/* the network namespace this phy lives in currently */
|
|
struct net *_net;
|
|
#endif
|
|
|
|
#ifdef CONFIG_CFG80211_WEXT
|
|
const struct iw_handler_def *wext;
|
|
#endif
|
|
|
|
char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
|
|
};
|
|
|
|
#ifdef CONFIG_NET_NS
|
|
static inline struct net *wiphy_net(struct wiphy *wiphy)
|
|
{
|
|
return wiphy->_net;
|
|
}
|
|
|
|
static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
|
|
{
|
|
wiphy->_net = net;
|
|
}
|
|
#else
|
|
static inline struct net *wiphy_net(struct wiphy *wiphy)
|
|
{
|
|
return &init_net;
|
|
}
|
|
|
|
static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* wiphy_priv - return priv from wiphy
|
|
*
|
|
* @wiphy: the wiphy whose priv pointer to return
|
|
*/
|
|
static inline void *wiphy_priv(struct wiphy *wiphy)
|
|
{
|
|
BUG_ON(!wiphy);
|
|
return &wiphy->priv;
|
|
}
|
|
|
|
/**
|
|
* priv_to_wiphy - return the wiphy containing the priv
|
|
*
|
|
* @priv: a pointer previously returned by wiphy_priv
|
|
*/
|
|
static inline struct wiphy *priv_to_wiphy(void *priv)
|
|
{
|
|
BUG_ON(!priv);
|
|
return container_of(priv, struct wiphy, priv);
|
|
}
|
|
|
|
/**
|
|
* set_wiphy_dev - set device pointer for wiphy
|
|
*
|
|
* @wiphy: The wiphy whose device to bind
|
|
* @dev: The device to parent it to
|
|
*/
|
|
static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
|
|
{
|
|
wiphy->dev.parent = dev;
|
|
}
|
|
|
|
/**
|
|
* wiphy_dev - get wiphy dev pointer
|
|
*
|
|
* @wiphy: The wiphy whose device struct to look up
|
|
*/
|
|
static inline struct device *wiphy_dev(struct wiphy *wiphy)
|
|
{
|
|
return wiphy->dev.parent;
|
|
}
|
|
|
|
/**
|
|
* wiphy_name - get wiphy name
|
|
*
|
|
* @wiphy: The wiphy whose name to return
|
|
*/
|
|
static inline const char *wiphy_name(struct wiphy *wiphy)
|
|
{
|
|
return dev_name(&wiphy->dev);
|
|
}
|
|
|
|
/**
|
|
* wiphy_new - create a new wiphy for use with cfg80211
|
|
*
|
|
* @ops: The configuration operations for this device
|
|
* @sizeof_priv: The size of the private area to allocate
|
|
*
|
|
* Create a new wiphy and associate the given operations with it.
|
|
* @sizeof_priv bytes are allocated for private use.
|
|
*
|
|
* The returned pointer must be assigned to each netdev's
|
|
* ieee80211_ptr for proper operation.
|
|
*/
|
|
struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
|
|
|
|
/**
|
|
* wiphy_register - register a wiphy with cfg80211
|
|
*
|
|
* @wiphy: The wiphy to register.
|
|
*
|
|
* Returns a non-negative wiphy index or a negative error code.
|
|
*/
|
|
extern int wiphy_register(struct wiphy *wiphy);
|
|
|
|
/**
|
|
* wiphy_unregister - deregister a wiphy from cfg80211
|
|
*
|
|
* @wiphy: The wiphy to unregister.
|
|
*
|
|
* After this call, no more requests can be made with this priv
|
|
* pointer, but the call may sleep to wait for an outstanding
|
|
* request that is being handled.
|
|
*/
|
|
extern void wiphy_unregister(struct wiphy *wiphy);
|
|
|
|
/**
|
|
* wiphy_free - free wiphy
|
|
*
|
|
* @wiphy: The wiphy to free
|
|
*/
|
|
extern void wiphy_free(struct wiphy *wiphy);
|
|
|
|
/* internal structs */
|
|
struct cfg80211_conn;
|
|
struct cfg80211_internal_bss;
|
|
struct cfg80211_cached_keys;
|
|
|
|
#define MAX_AUTH_BSSES 4
|
|
|
|
/**
|
|
* struct wireless_dev - wireless per-netdev state
|
|
*
|
|
* This structure must be allocated by the driver/stack
|
|
* that uses the ieee80211_ptr field in struct net_device
|
|
* (this is intentional so it can be allocated along with
|
|
* the netdev.)
|
|
*
|
|
* @wiphy: pointer to hardware description
|
|
* @iftype: interface type
|
|
* @list: (private) Used to collect the interfaces
|
|
* @netdev: (private) Used to reference back to the netdev
|
|
* @current_bss: (private) Used by the internal configuration code
|
|
* @channel: (private) Used by the internal configuration code to track
|
|
* user-set AP, monitor and WDS channels for wireless extensions
|
|
* @bssid: (private) Used by the internal configuration code
|
|
* @ssid: (private) Used by the internal configuration code
|
|
* @ssid_len: (private) Used by the internal configuration code
|
|
* @wext: (private) Used by the internal wireless extensions compat code
|
|
* @wext_bssid: (private) Used by the internal wireless extensions compat code
|
|
* @use_4addr: indicates 4addr mode is used on this interface, must be
|
|
* set by driver (if supported) on add_interface BEFORE registering the
|
|
* netdev and may otherwise be used by driver read-only, will be update
|
|
* by cfg80211 on change_interface
|
|
* @action_registrations: list of registrations for action frames
|
|
* @action_registrations_lock: lock for the list
|
|
*/
|
|
struct wireless_dev {
|
|
struct wiphy *wiphy;
|
|
enum nl80211_iftype iftype;
|
|
|
|
/* the remainder of this struct should be private to cfg80211 */
|
|
struct list_head list;
|
|
struct net_device *netdev;
|
|
|
|
struct list_head action_registrations;
|
|
spinlock_t action_registrations_lock;
|
|
|
|
struct mutex mtx;
|
|
|
|
struct work_struct cleanup_work;
|
|
|
|
bool use_4addr;
|
|
|
|
/* currently used for IBSS and SME - might be rearranged later */
|
|
u8 ssid[IEEE80211_MAX_SSID_LEN];
|
|
u8 ssid_len;
|
|
enum {
|
|
CFG80211_SME_IDLE,
|
|
CFG80211_SME_CONNECTING,
|
|
CFG80211_SME_CONNECTED,
|
|
} sme_state;
|
|
struct cfg80211_conn *conn;
|
|
struct cfg80211_cached_keys *connect_keys;
|
|
|
|
struct list_head event_list;
|
|
spinlock_t event_lock;
|
|
|
|
struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES];
|
|
struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
|
|
struct cfg80211_internal_bss *current_bss; /* associated / joined */
|
|
struct ieee80211_channel *channel;
|
|
|
|
bool ps;
|
|
int ps_timeout;
|
|
|
|
#ifdef CONFIG_CFG80211_WEXT
|
|
/* wext data */
|
|
struct {
|
|
struct cfg80211_ibss_params ibss;
|
|
struct cfg80211_connect_params connect;
|
|
struct cfg80211_cached_keys *keys;
|
|
u8 *ie;
|
|
size_t ie_len;
|
|
u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
|
|
u8 ssid[IEEE80211_MAX_SSID_LEN];
|
|
s8 default_key, default_mgmt_key;
|
|
bool prev_bssid_valid;
|
|
} wext;
|
|
#endif
|
|
};
|
|
|
|
/**
|
|
* wdev_priv - return wiphy priv from wireless_dev
|
|
*
|
|
* @wdev: The wireless device whose wiphy's priv pointer to return
|
|
*/
|
|
static inline void *wdev_priv(struct wireless_dev *wdev)
|
|
{
|
|
BUG_ON(!wdev);
|
|
return wiphy_priv(wdev->wiphy);
|
|
}
|
|
|
|
/*
|
|
* Utility functions
|
|
*/
|
|
|
|
/**
|
|
* ieee80211_channel_to_frequency - convert channel number to frequency
|
|
*/
|
|
extern int ieee80211_channel_to_frequency(int chan);
|
|
|
|
/**
|
|
* ieee80211_frequency_to_channel - convert frequency to channel number
|
|
*/
|
|
extern int ieee80211_frequency_to_channel(int freq);
|
|
|
|
/*
|
|
* Name indirection necessary because the ieee80211 code also has
|
|
* a function named "ieee80211_get_channel", so if you include
|
|
* cfg80211's header file you get cfg80211's version, if you try
|
|
* to include both header files you'll (rightfully!) get a symbol
|
|
* clash.
|
|
*/
|
|
extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
|
|
int freq);
|
|
/**
|
|
* ieee80211_get_channel - get channel struct from wiphy for specified frequency
|
|
*/
|
|
static inline struct ieee80211_channel *
|
|
ieee80211_get_channel(struct wiphy *wiphy, int freq)
|
|
{
|
|
return __ieee80211_get_channel(wiphy, freq);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_get_response_rate - get basic rate for a given rate
|
|
*
|
|
* @sband: the band to look for rates in
|
|
* @basic_rates: bitmap of basic rates
|
|
* @bitrate: the bitrate for which to find the basic rate
|
|
*
|
|
* This function returns the basic rate corresponding to a given
|
|
* bitrate, that is the next lower bitrate contained in the basic
|
|
* rate map, which is, for this function, given as a bitmap of
|
|
* indices of rates in the band's bitrate table.
|
|
*/
|
|
struct ieee80211_rate *
|
|
ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
|
|
u32 basic_rates, int bitrate);
|
|
|
|
/*
|
|
* Radiotap parsing functions -- for controlled injection support
|
|
*
|
|
* Implemented in net/wireless/radiotap.c
|
|
* Documentation in Documentation/networking/radiotap-headers.txt
|
|
*/
|
|
|
|
struct radiotap_align_size {
|
|
uint8_t align:4, size:4;
|
|
};
|
|
|
|
struct ieee80211_radiotap_namespace {
|
|
const struct radiotap_align_size *align_size;
|
|
int n_bits;
|
|
uint32_t oui;
|
|
uint8_t subns;
|
|
};
|
|
|
|
struct ieee80211_radiotap_vendor_namespaces {
|
|
const struct ieee80211_radiotap_namespace *ns;
|
|
int n_ns;
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
|
|
* @this_arg_index: index of current arg, valid after each successful call
|
|
* to ieee80211_radiotap_iterator_next()
|
|
* @this_arg: pointer to current radiotap arg; it is valid after each
|
|
* call to ieee80211_radiotap_iterator_next() but also after
|
|
* ieee80211_radiotap_iterator_init() where it will point to
|
|
* the beginning of the actual data portion
|
|
* @this_arg_size: length of the current arg, for convenience
|
|
* @current_namespace: pointer to the current namespace definition
|
|
* (or internally %NULL if the current namespace is unknown)
|
|
* @is_radiotap_ns: indicates whether the current namespace is the default
|
|
* radiotap namespace or not
|
|
*
|
|
* @overrides: override standard radiotap fields
|
|
* @n_overrides: number of overrides
|
|
*
|
|
* @_rtheader: pointer to the radiotap header we are walking through
|
|
* @_max_length: length of radiotap header in cpu byte ordering
|
|
* @_arg_index: next argument index
|
|
* @_arg: next argument pointer
|
|
* @_next_bitmap: internal pointer to next present u32
|
|
* @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
|
|
* @_vns: vendor namespace definitions
|
|
* @_next_ns_data: beginning of the next namespace's data
|
|
* @_reset_on_ext: internal; reset the arg index to 0 when going to the
|
|
* next bitmap word
|
|
*
|
|
* Describes the radiotap parser state. Fields prefixed with an underscore
|
|
* must not be used by users of the parser, only by the parser internally.
|
|
*/
|
|
|
|
struct ieee80211_radiotap_iterator {
|
|
struct ieee80211_radiotap_header *_rtheader;
|
|
const struct ieee80211_radiotap_vendor_namespaces *_vns;
|
|
const struct ieee80211_radiotap_namespace *current_namespace;
|
|
|
|
unsigned char *_arg, *_next_ns_data;
|
|
__le32 *_next_bitmap;
|
|
|
|
unsigned char *this_arg;
|
|
int this_arg_index;
|
|
int this_arg_size;
|
|
|
|
int is_radiotap_ns;
|
|
|
|
int _max_length;
|
|
int _arg_index;
|
|
uint32_t _bitmap_shifter;
|
|
int _reset_on_ext;
|
|
};
|
|
|
|
extern int ieee80211_radiotap_iterator_init(
|
|
struct ieee80211_radiotap_iterator *iterator,
|
|
struct ieee80211_radiotap_header *radiotap_header,
|
|
int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns);
|
|
|
|
extern int ieee80211_radiotap_iterator_next(
|
|
struct ieee80211_radiotap_iterator *iterator);
|
|
|
|
|
|
extern const unsigned char rfc1042_header[6];
|
|
extern const unsigned char bridge_tunnel_header[6];
|
|
|
|
/**
|
|
* ieee80211_get_hdrlen_from_skb - get header length from data
|
|
*
|
|
* Given an skb with a raw 802.11 header at the data pointer this function
|
|
* returns the 802.11 header length in bytes (not including encryption
|
|
* headers). If the data in the sk_buff is too short to contain a valid 802.11
|
|
* header the function returns 0.
|
|
*
|
|
* @skb: the frame
|
|
*/
|
|
unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
|
|
|
|
/**
|
|
* ieee80211_hdrlen - get header length in bytes from frame control
|
|
* @fc: frame control field in little-endian format
|
|
*/
|
|
unsigned int ieee80211_hdrlen(__le16 fc);
|
|
|
|
/**
|
|
* ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
|
|
* @skb: the 802.11 data frame
|
|
* @addr: the device MAC address
|
|
* @iftype: the virtual interface type
|
|
*/
|
|
int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
|
|
enum nl80211_iftype iftype);
|
|
|
|
/**
|
|
* ieee80211_data_from_8023 - convert an 802.3 frame to 802.11
|
|
* @skb: the 802.3 frame
|
|
* @addr: the device MAC address
|
|
* @iftype: the virtual interface type
|
|
* @bssid: the network bssid (used only for iftype STATION and ADHOC)
|
|
* @qos: build 802.11 QoS data frame
|
|
*/
|
|
int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
|
|
enum nl80211_iftype iftype, u8 *bssid, bool qos);
|
|
|
|
/**
|
|
* ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame
|
|
*
|
|
* Decode an IEEE 802.11n A-MSDU frame and convert it to a list of
|
|
* 802.3 frames. The @list will be empty if the decode fails. The
|
|
* @skb is consumed after the function returns.
|
|
*
|
|
* @skb: The input IEEE 802.11n A-MSDU frame.
|
|
* @list: The output list of 802.3 frames. It must be allocated and
|
|
* initialized by by the caller.
|
|
* @addr: The device MAC address.
|
|
* @iftype: The device interface type.
|
|
* @extra_headroom: The hardware extra headroom for SKBs in the @list.
|
|
*/
|
|
void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
|
|
const u8 *addr, enum nl80211_iftype iftype,
|
|
const unsigned int extra_headroom);
|
|
|
|
/**
|
|
* cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
|
|
* @skb: the data frame
|
|
*/
|
|
unsigned int cfg80211_classify8021d(struct sk_buff *skb);
|
|
|
|
/**
|
|
* cfg80211_find_ie - find information element in data
|
|
*
|
|
* @eid: element ID
|
|
* @ies: data consisting of IEs
|
|
* @len: length of data
|
|
*
|
|
* This function will return %NULL if the element ID could
|
|
* not be found or if the element is invalid (claims to be
|
|
* longer than the given data), or a pointer to the first byte
|
|
* of the requested element, that is the byte containing the
|
|
* element ID. There are no checks on the element length
|
|
* other than having to fit into the given data.
|
|
*/
|
|
const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
|
|
|
|
/*
|
|
* Regulatory helper functions for wiphys
|
|
*/
|
|
|
|
/**
|
|
* regulatory_hint - driver hint to the wireless core a regulatory domain
|
|
* @wiphy: the wireless device giving the hint (used only for reporting
|
|
* conflicts)
|
|
* @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
|
|
* should be in. If @rd is set this should be NULL. Note that if you
|
|
* set this to NULL you should still set rd->alpha2 to some accepted
|
|
* alpha2.
|
|
*
|
|
* Wireless drivers can use this function to hint to the wireless core
|
|
* what it believes should be the current regulatory domain by
|
|
* giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
|
|
* domain should be in or by providing a completely build regulatory domain.
|
|
* If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
|
|
* for a regulatory domain structure for the respective country.
|
|
*
|
|
* The wiphy must have been registered to cfg80211 prior to this call.
|
|
* For cfg80211 drivers this means you must first use wiphy_register(),
|
|
* for mac80211 drivers you must first use ieee80211_register_hw().
|
|
*
|
|
* Drivers should check the return value, its possible you can get
|
|
* an -ENOMEM.
|
|
*/
|
|
extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
|
|
|
|
/**
|
|
* wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
|
|
* @wiphy: the wireless device we want to process the regulatory domain on
|
|
* @regd: the custom regulatory domain to use for this wiphy
|
|
*
|
|
* Drivers can sometimes have custom regulatory domains which do not apply
|
|
* to a specific country. Drivers can use this to apply such custom regulatory
|
|
* domains. This routine must be called prior to wiphy registration. The
|
|
* custom regulatory domain will be trusted completely and as such previous
|
|
* default channel settings will be disregarded. If no rule is found for a
|
|
* channel on the regulatory domain the channel will be disabled.
|
|
*/
|
|
extern void wiphy_apply_custom_regulatory(
|
|
struct wiphy *wiphy,
|
|
const struct ieee80211_regdomain *regd);
|
|
|
|
/**
|
|
* freq_reg_info - get regulatory information for the given frequency
|
|
* @wiphy: the wiphy for which we want to process this rule for
|
|
* @center_freq: Frequency in KHz for which we want regulatory information for
|
|
* @desired_bw_khz: the desired max bandwidth you want to use per
|
|
* channel. Note that this is still 20 MHz if you want to use HT40
|
|
* as HT40 makes use of two channels for its 40 MHz width bandwidth.
|
|
* If set to 0 we'll assume you want the standard 20 MHz.
|
|
* @reg_rule: the regulatory rule which we have for this frequency
|
|
*
|
|
* Use this function to get the regulatory rule for a specific frequency on
|
|
* a given wireless device. If the device has a specific regulatory domain
|
|
* it wants to follow we respect that unless a country IE has been received
|
|
* and processed already.
|
|
*
|
|
* Returns 0 if it was able to find a valid regulatory rule which does
|
|
* apply to the given center_freq otherwise it returns non-zero. It will
|
|
* also return -ERANGE if we determine the given center_freq does not even have
|
|
* a regulatory rule for a frequency range in the center_freq's band. See
|
|
* freq_in_rule_band() for our current definition of a band -- this is purely
|
|
* subjective and right now its 802.11 specific.
|
|
*/
|
|
extern int freq_reg_info(struct wiphy *wiphy,
|
|
u32 center_freq,
|
|
u32 desired_bw_khz,
|
|
const struct ieee80211_reg_rule **reg_rule);
|
|
|
|
/*
|
|
* Temporary wext handlers & helper functions
|
|
*
|
|
* In the future cfg80211 will simply assign the entire wext handler
|
|
* structure to netdevs it manages, but we're not there yet.
|
|
*/
|
|
int cfg80211_wext_giwname(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
char *name, char *extra);
|
|
int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
|
|
u32 *mode, char *extra);
|
|
int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
|
|
u32 *mode, char *extra);
|
|
int cfg80211_wext_siwscan(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
union iwreq_data *wrqu, char *extra);
|
|
int cfg80211_wext_giwscan(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *data, char *extra);
|
|
int cfg80211_wext_siwmlme(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *data, char *extra);
|
|
int cfg80211_wext_giwrange(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *data, char *extra);
|
|
int cfg80211_wext_siwgenie(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *data, char *extra);
|
|
int cfg80211_wext_siwauth(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *data, char *extra);
|
|
int cfg80211_wext_giwauth(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *data, char *extra);
|
|
|
|
int cfg80211_wext_siwfreq(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_freq *freq, char *extra);
|
|
int cfg80211_wext_giwfreq(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_freq *freq, char *extra);
|
|
int cfg80211_wext_siwessid(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *data, char *ssid);
|
|
int cfg80211_wext_giwessid(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *data, char *ssid);
|
|
int cfg80211_wext_siwrate(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *rate, char *extra);
|
|
int cfg80211_wext_giwrate(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *rate, char *extra);
|
|
|
|
int cfg80211_wext_siwrts(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *rts, char *extra);
|
|
int cfg80211_wext_giwrts(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *rts, char *extra);
|
|
int cfg80211_wext_siwfrag(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *frag, char *extra);
|
|
int cfg80211_wext_giwfrag(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *frag, char *extra);
|
|
int cfg80211_wext_siwretry(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *retry, char *extra);
|
|
int cfg80211_wext_giwretry(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *retry, char *extra);
|
|
int cfg80211_wext_siwencodeext(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *erq, char *extra);
|
|
int cfg80211_wext_siwencode(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *erq, char *keybuf);
|
|
int cfg80211_wext_giwencode(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_point *erq, char *keybuf);
|
|
int cfg80211_wext_siwtxpower(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
union iwreq_data *data, char *keybuf);
|
|
int cfg80211_wext_giwtxpower(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
union iwreq_data *data, char *keybuf);
|
|
struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev);
|
|
|
|
int cfg80211_wext_siwpower(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *wrq, char *extra);
|
|
int cfg80211_wext_giwpower(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct iw_param *wrq, char *extra);
|
|
|
|
int cfg80211_wext_siwap(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct sockaddr *ap_addr, char *extra);
|
|
int cfg80211_wext_giwap(struct net_device *dev,
|
|
struct iw_request_info *info,
|
|
struct sockaddr *ap_addr, char *extra);
|
|
|
|
/*
|
|
* callbacks for asynchronous cfg80211 methods, notification
|
|
* functions and BSS handling helpers
|
|
*/
|
|
|
|
/**
|
|
* cfg80211_scan_done - notify that scan finished
|
|
*
|
|
* @request: the corresponding scan request
|
|
* @aborted: set to true if the scan was aborted for any reason,
|
|
* userspace will be notified of that
|
|
*/
|
|
void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
|
|
|
|
/**
|
|
* cfg80211_inform_bss - inform cfg80211 of a new BSS
|
|
*
|
|
* @wiphy: the wiphy reporting the BSS
|
|
* @bss: the found BSS
|
|
* @signal: the signal strength, type depends on the wiphy's signal_type
|
|
* @gfp: context flags
|
|
*
|
|
* This informs cfg80211 that BSS information was found and
|
|
* the BSS should be updated/added.
|
|
*/
|
|
struct cfg80211_bss*
|
|
cfg80211_inform_bss_frame(struct wiphy *wiphy,
|
|
struct ieee80211_channel *channel,
|
|
struct ieee80211_mgmt *mgmt, size_t len,
|
|
s32 signal, gfp_t gfp);
|
|
|
|
struct cfg80211_bss*
|
|
cfg80211_inform_bss(struct wiphy *wiphy,
|
|
struct ieee80211_channel *channel,
|
|
const u8 *bssid,
|
|
u64 timestamp, u16 capability, u16 beacon_interval,
|
|
const u8 *ie, size_t ielen,
|
|
s32 signal, gfp_t gfp);
|
|
|
|
struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
|
|
struct ieee80211_channel *channel,
|
|
const u8 *bssid,
|
|
const u8 *ssid, size_t ssid_len,
|
|
u16 capa_mask, u16 capa_val);
|
|
static inline struct cfg80211_bss *
|
|
cfg80211_get_ibss(struct wiphy *wiphy,
|
|
struct ieee80211_channel *channel,
|
|
const u8 *ssid, size_t ssid_len)
|
|
{
|
|
return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len,
|
|
WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
|
|
}
|
|
|
|
struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
|
|
struct ieee80211_channel *channel,
|
|
const u8 *meshid, size_t meshidlen,
|
|
const u8 *meshcfg);
|
|
void cfg80211_put_bss(struct cfg80211_bss *bss);
|
|
|
|
/**
|
|
* cfg80211_unlink_bss - unlink BSS from internal data structures
|
|
* @wiphy: the wiphy
|
|
* @bss: the bss to remove
|
|
*
|
|
* This function removes the given BSS from the internal data structures
|
|
* thereby making it no longer show up in scan results etc. Use this
|
|
* function when you detect a BSS is gone. Normally BSSes will also time
|
|
* out, so it is not necessary to use this function at all.
|
|
*/
|
|
void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
|
|
|
|
/**
|
|
* cfg80211_send_rx_auth - notification of processed authentication
|
|
* @dev: network device
|
|
* @buf: authentication frame (header + body)
|
|
* @len: length of the frame data
|
|
*
|
|
* This function is called whenever an authentication has been processed in
|
|
* station mode. The driver is required to call either this function or
|
|
* cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
|
|
* call. This function may sleep.
|
|
*/
|
|
void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
|
|
|
|
/**
|
|
* cfg80211_send_auth_timeout - notification of timed out authentication
|
|
* @dev: network device
|
|
* @addr: The MAC address of the device with which the authentication timed out
|
|
*
|
|
* This function may sleep.
|
|
*/
|
|
void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
|
|
|
|
/**
|
|
* __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled
|
|
* @dev: network device
|
|
* @addr: The MAC address of the device with which the authentication timed out
|
|
*
|
|
* When a pending authentication had no action yet, the driver may decide
|
|
* to not send a deauth frame, but in that case must calls this function
|
|
* to tell cfg80211 about this decision. It is only valid to call this
|
|
* function within the deauth() callback.
|
|
*/
|
|
void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr);
|
|
|
|
/**
|
|
* cfg80211_send_rx_assoc - notification of processed association
|
|
* @dev: network device
|
|
* @buf: (re)association response frame (header + body)
|
|
* @len: length of the frame data
|
|
*
|
|
* This function is called whenever a (re)association response has been
|
|
* processed in station mode. The driver is required to call either this
|
|
* function or cfg80211_send_assoc_timeout() to indicate the result of
|
|
* cfg80211_ops::assoc() call. This function may sleep.
|
|
*/
|
|
void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len);
|
|
|
|
/**
|
|
* cfg80211_send_assoc_timeout - notification of timed out association
|
|
* @dev: network device
|
|
* @addr: The MAC address of the device with which the association timed out
|
|
*
|
|
* This function may sleep.
|
|
*/
|
|
void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
|
|
|
|
/**
|
|
* cfg80211_send_deauth - notification of processed deauthentication
|
|
* @dev: network device
|
|
* @buf: deauthentication frame (header + body)
|
|
* @len: length of the frame data
|
|
*
|
|
* This function is called whenever deauthentication has been processed in
|
|
* station mode. This includes both received deauthentication frames and
|
|
* locally generated ones. This function may sleep.
|
|
*/
|
|
void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
|
|
|
|
/**
|
|
* __cfg80211_send_deauth - notification of processed deauthentication
|
|
* @dev: network device
|
|
* @buf: deauthentication frame (header + body)
|
|
* @len: length of the frame data
|
|
*
|
|
* Like cfg80211_send_deauth(), but doesn't take the wdev lock.
|
|
*/
|
|
void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
|
|
|
|
/**
|
|
* cfg80211_send_disassoc - notification of processed disassociation
|
|
* @dev: network device
|
|
* @buf: disassociation response frame (header + body)
|
|
* @len: length of the frame data
|
|
*
|
|
* This function is called whenever disassociation has been processed in
|
|
* station mode. This includes both received disassociation frames and locally
|
|
* generated ones. This function may sleep.
|
|
*/
|
|
void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
|
|
|
|
/**
|
|
* __cfg80211_send_disassoc - notification of processed disassociation
|
|
* @dev: network device
|
|
* @buf: disassociation response frame (header + body)
|
|
* @len: length of the frame data
|
|
*
|
|
* Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
|
|
*/
|
|
void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
|
|
size_t len);
|
|
|
|
/**
|
|
* cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
|
|
* @dev: network device
|
|
* @addr: The source MAC address of the frame
|
|
* @key_type: The key type that the received frame used
|
|
* @key_id: Key identifier (0..3)
|
|
* @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
|
|
* @gfp: allocation flags
|
|
*
|
|
* This function is called whenever the local MAC detects a MIC failure in a
|
|
* received frame. This matches with MLME-MICHAELMICFAILURE.indication()
|
|
* primitive.
|
|
*/
|
|
void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
|
|
enum nl80211_key_type key_type, int key_id,
|
|
const u8 *tsc, gfp_t gfp);
|
|
|
|
/**
|
|
* cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
|
|
*
|
|
* @dev: network device
|
|
* @bssid: the BSSID of the IBSS joined
|
|
* @gfp: allocation flags
|
|
*
|
|
* This function notifies cfg80211 that the device joined an IBSS or
|
|
* switched to a different BSSID. Before this function can be called,
|
|
* either a beacon has to have been received from the IBSS, or one of
|
|
* the cfg80211_inform_bss{,_frame} functions must have been called
|
|
* with the locally generated beacon -- this guarantees that there is
|
|
* always a scan result for this IBSS. cfg80211 will handle the rest.
|
|
*/
|
|
void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
|
|
|
|
/**
|
|
* wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
|
|
* @wiphy: the wiphy
|
|
* @blocked: block status
|
|
*/
|
|
void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked);
|
|
|
|
/**
|
|
* wiphy_rfkill_start_polling - start polling rfkill
|
|
* @wiphy: the wiphy
|
|
*/
|
|
void wiphy_rfkill_start_polling(struct wiphy *wiphy);
|
|
|
|
/**
|
|
* wiphy_rfkill_stop_polling - stop polling rfkill
|
|
* @wiphy: the wiphy
|
|
*/
|
|
void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
|
|
|
|
#ifdef CONFIG_NL80211_TESTMODE
|
|
/**
|
|
* cfg80211_testmode_alloc_reply_skb - allocate testmode reply
|
|
* @wiphy: the wiphy
|
|
* @approxlen: an upper bound of the length of the data that will
|
|
* be put into the skb
|
|
*
|
|
* This function allocates and pre-fills an skb for a reply to
|
|
* the testmode command. Since it is intended for a reply, calling
|
|
* it outside of the @testmode_cmd operation is invalid.
|
|
*
|
|
* The returned skb (or %NULL if any errors happen) is pre-filled
|
|
* with the wiphy index and set up in a way that any data that is
|
|
* put into the skb (with skb_put(), nla_put() or similar) will end
|
|
* up being within the %NL80211_ATTR_TESTDATA attribute, so all that
|
|
* needs to be done with the skb is adding data for the corresponding
|
|
* userspace tool which can then read that data out of the testdata
|
|
* attribute. You must not modify the skb in any other way.
|
|
*
|
|
* When done, call cfg80211_testmode_reply() with the skb and return
|
|
* its error code as the result of the @testmode_cmd operation.
|
|
*/
|
|
struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
|
|
int approxlen);
|
|
|
|
/**
|
|
* cfg80211_testmode_reply - send the reply skb
|
|
* @skb: The skb, must have been allocated with
|
|
* cfg80211_testmode_alloc_reply_skb()
|
|
*
|
|
* Returns an error code or 0 on success, since calling this
|
|
* function will usually be the last thing before returning
|
|
* from the @testmode_cmd you should return the error code.
|
|
* Note that this function consumes the skb regardless of the
|
|
* return value.
|
|
*/
|
|
int cfg80211_testmode_reply(struct sk_buff *skb);
|
|
|
|
/**
|
|
* cfg80211_testmode_alloc_event_skb - allocate testmode event
|
|
* @wiphy: the wiphy
|
|
* @approxlen: an upper bound of the length of the data that will
|
|
* be put into the skb
|
|
* @gfp: allocation flags
|
|
*
|
|
* This function allocates and pre-fills an skb for an event on the
|
|
* testmode multicast group.
|
|
*
|
|
* The returned skb (or %NULL if any errors happen) is set up in the
|
|
* same way as with cfg80211_testmode_alloc_reply_skb() but prepared
|
|
* for an event. As there, you should simply add data to it that will
|
|
* then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must
|
|
* not modify the skb in any other way.
|
|
*
|
|
* When done filling the skb, call cfg80211_testmode_event() with the
|
|
* skb to send the event.
|
|
*/
|
|
struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
|
|
int approxlen, gfp_t gfp);
|
|
|
|
/**
|
|
* cfg80211_testmode_event - send the event
|
|
* @skb: The skb, must have been allocated with
|
|
* cfg80211_testmode_alloc_event_skb()
|
|
* @gfp: allocation flags
|
|
*
|
|
* This function sends the given @skb, which must have been allocated
|
|
* by cfg80211_testmode_alloc_event_skb(), as an event. It always
|
|
* consumes it.
|
|
*/
|
|
void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp);
|
|
|
|
#define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd),
|
|
#else
|
|
#define CFG80211_TESTMODE_CMD(cmd)
|
|
#endif
|
|
|
|
/**
|
|
* cfg80211_connect_result - notify cfg80211 of connection result
|
|
*
|
|
* @dev: network device
|
|
* @bssid: the BSSID of the AP
|
|
* @req_ie: association request IEs (maybe be %NULL)
|
|
* @req_ie_len: association request IEs length
|
|
* @resp_ie: association response IEs (may be %NULL)
|
|
* @resp_ie_len: assoc response IEs length
|
|
* @status: status code, 0 for successful connection, use
|
|
* %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
|
|
* the real status code for failures.
|
|
* @gfp: allocation flags
|
|
*
|
|
* It should be called by the underlying driver whenever connect() has
|
|
* succeeded.
|
|
*/
|
|
void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
|
|
const u8 *req_ie, size_t req_ie_len,
|
|
const u8 *resp_ie, size_t resp_ie_len,
|
|
u16 status, gfp_t gfp);
|
|
|
|
/**
|
|
* cfg80211_roamed - notify cfg80211 of roaming
|
|
*
|
|
* @dev: network device
|
|
* @bssid: the BSSID of the new AP
|
|
* @req_ie: association request IEs (maybe be %NULL)
|
|
* @req_ie_len: association request IEs length
|
|
* @resp_ie: association response IEs (may be %NULL)
|
|
* @resp_ie_len: assoc response IEs length
|
|
* @gfp: allocation flags
|
|
*
|
|
* It should be called by the underlying driver whenever it roamed
|
|
* from one AP to another while connected.
|
|
*/
|
|
void cfg80211_roamed(struct net_device *dev, const u8 *bssid,
|
|
const u8 *req_ie, size_t req_ie_len,
|
|
const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
|
|
|
|
/**
|
|
* cfg80211_disconnected - notify cfg80211 that connection was dropped
|
|
*
|
|
* @dev: network device
|
|
* @ie: information elements of the deauth/disassoc frame (may be %NULL)
|
|
* @ie_len: length of IEs
|
|
* @reason: reason code for the disconnection, set it to 0 if unknown
|
|
* @gfp: allocation flags
|
|
*
|
|
* After it calls this function, the driver should enter an idle state
|
|
* and not try to connect to any AP any more.
|
|
*/
|
|
void cfg80211_disconnected(struct net_device *dev, u16 reason,
|
|
u8 *ie, size_t ie_len, gfp_t gfp);
|
|
|
|
/**
|
|
* cfg80211_ready_on_channel - notification of remain_on_channel start
|
|
* @dev: network device
|
|
* @cookie: the request cookie
|
|
* @chan: The current channel (from remain_on_channel request)
|
|
* @channel_type: Channel type
|
|
* @duration: Duration in milliseconds that the driver intents to remain on the
|
|
* channel
|
|
* @gfp: allocation flags
|
|
*/
|
|
void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie,
|
|
struct ieee80211_channel *chan,
|
|
enum nl80211_channel_type channel_type,
|
|
unsigned int duration, gfp_t gfp);
|
|
|
|
/**
|
|
* cfg80211_remain_on_channel_expired - remain_on_channel duration expired
|
|
* @dev: network device
|
|
* @cookie: the request cookie
|
|
* @chan: The current channel (from remain_on_channel request)
|
|
* @channel_type: Channel type
|
|
* @gfp: allocation flags
|
|
*/
|
|
void cfg80211_remain_on_channel_expired(struct net_device *dev,
|
|
u64 cookie,
|
|
struct ieee80211_channel *chan,
|
|
enum nl80211_channel_type channel_type,
|
|
gfp_t gfp);
|
|
|
|
|
|
/**
|
|
* cfg80211_new_sta - notify userspace about station
|
|
*
|
|
* @dev: the netdev
|
|
* @mac_addr: the station's address
|
|
* @sinfo: the station information
|
|
* @gfp: allocation flags
|
|
*/
|
|
void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
|
|
struct station_info *sinfo, gfp_t gfp);
|
|
|
|
/**
|
|
* cfg80211_rx_action - notification of received, unprocessed Action frame
|
|
* @dev: network device
|
|
* @freq: Frequency on which the frame was received in MHz
|
|
* @buf: Action frame (header + body)
|
|
* @len: length of the frame data
|
|
* @gfp: context flags
|
|
* Returns %true if a user space application is responsible for rejecting the
|
|
* unrecognized Action frame; %false if no such application is registered
|
|
* (i.e., the driver is responsible for rejecting the unrecognized Action
|
|
* frame)
|
|
*
|
|
* This function is called whenever an Action frame is received for a station
|
|
* mode interface, but is not processed in kernel.
|
|
*/
|
|
bool cfg80211_rx_action(struct net_device *dev, int freq, const u8 *buf,
|
|
size_t len, gfp_t gfp);
|
|
|
|
/**
|
|
* cfg80211_action_tx_status - notification of TX status for Action frame
|
|
* @dev: network device
|
|
* @cookie: Cookie returned by cfg80211_ops::action()
|
|
* @buf: Action frame (header + body)
|
|
* @len: length of the frame data
|
|
* @ack: Whether frame was acknowledged
|
|
* @gfp: context flags
|
|
*
|
|
* This function is called whenever an Action frame was requested to be
|
|
* transmitted with cfg80211_ops::action() to report the TX status of the
|
|
* transmission attempt.
|
|
*/
|
|
void cfg80211_action_tx_status(struct net_device *dev, u64 cookie,
|
|
const u8 *buf, size_t len, bool ack, gfp_t gfp);
|
|
|
|
|
|
/**
|
|
* cfg80211_cqm_rssi_notify - connection quality monitoring rssi event
|
|
* @dev: network device
|
|
* @rssi_event: the triggered RSSI event
|
|
* @gfp: context flags
|
|
*
|
|
* This function is called when a configured connection quality monitoring
|
|
* rssi threshold reached event occurs.
|
|
*/
|
|
void cfg80211_cqm_rssi_notify(struct net_device *dev,
|
|
enum nl80211_cqm_rssi_threshold_event rssi_event,
|
|
gfp_t gfp);
|
|
|
|
#endif /* __NET_CFG80211_H */
|