mirror of https://gitee.com/openkylin/linux.git
302 lines
8.4 KiB
C
302 lines
8.4 KiB
C
/*
|
|
* Cypress APA trackpad with I2C interface
|
|
*
|
|
* Author: Dudley Du <dudl@cypress.com>
|
|
*
|
|
* Copyright (C) 2014 Cypress Semiconductor, Inc.
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
* more details.
|
|
*/
|
|
|
|
#ifndef _CYAPA_H
|
|
#define _CYAPA_H
|
|
|
|
#include <linux/firmware.h>
|
|
|
|
/* APA trackpad firmware generation number. */
|
|
#define CYAPA_GEN_UNKNOWN 0x00 /* unknown protocol. */
|
|
#define CYAPA_GEN3 0x03 /* support MT-protocol B with tracking ID. */
|
|
#define CYAPA_GEN5 0x05 /* support TrueTouch GEN5 trackpad device. */
|
|
|
|
#define CYAPA_NAME "Cypress APA Trackpad (cyapa)"
|
|
|
|
/*
|
|
* Macros for SMBus communication
|
|
*/
|
|
#define SMBUS_READ 0x01
|
|
#define SMBUS_WRITE 0x00
|
|
#define SMBUS_ENCODE_IDX(cmd, idx) ((cmd) | (((idx) & 0x03) << 1))
|
|
#define SMBUS_ENCODE_RW(cmd, rw) ((cmd) | ((rw) & 0x01))
|
|
#define SMBUS_BYTE_BLOCK_CMD_MASK 0x80
|
|
#define SMBUS_GROUP_BLOCK_CMD_MASK 0x40
|
|
|
|
/* Commands for read/write registers of Cypress trackpad */
|
|
#define CYAPA_CMD_SOFT_RESET 0x00
|
|
#define CYAPA_CMD_POWER_MODE 0x01
|
|
#define CYAPA_CMD_DEV_STATUS 0x02
|
|
#define CYAPA_CMD_GROUP_DATA 0x03
|
|
#define CYAPA_CMD_GROUP_CMD 0x04
|
|
#define CYAPA_CMD_GROUP_QUERY 0x05
|
|
#define CYAPA_CMD_BL_STATUS 0x06
|
|
#define CYAPA_CMD_BL_HEAD 0x07
|
|
#define CYAPA_CMD_BL_CMD 0x08
|
|
#define CYAPA_CMD_BL_DATA 0x09
|
|
#define CYAPA_CMD_BL_ALL 0x0a
|
|
#define CYAPA_CMD_BLK_PRODUCT_ID 0x0b
|
|
#define CYAPA_CMD_BLK_HEAD 0x0c
|
|
#define CYAPA_CMD_MAX_BASELINE 0x0d
|
|
#define CYAPA_CMD_MIN_BASELINE 0x0e
|
|
|
|
#define BL_HEAD_OFFSET 0x00
|
|
#define BL_DATA_OFFSET 0x10
|
|
|
|
#define BL_STATUS_SIZE 3 /* Length of gen3 bootloader status registers */
|
|
#define CYAPA_REG_MAP_SIZE 256
|
|
|
|
/*
|
|
* Gen3 Operational Device Status Register
|
|
*
|
|
* bit 7: Valid interrupt source
|
|
* bit 6 - 4: Reserved
|
|
* bit 3 - 2: Power status
|
|
* bit 1 - 0: Device status
|
|
*/
|
|
#define REG_OP_STATUS 0x00
|
|
#define OP_STATUS_SRC 0x80
|
|
#define OP_STATUS_POWER 0x0c
|
|
#define OP_STATUS_DEV 0x03
|
|
#define OP_STATUS_MASK (OP_STATUS_SRC | OP_STATUS_POWER | OP_STATUS_DEV)
|
|
|
|
/*
|
|
* Operational Finger Count/Button Flags Register
|
|
*
|
|
* bit 7 - 4: Number of touched finger
|
|
* bit 3: Valid data
|
|
* bit 2: Middle Physical Button
|
|
* bit 1: Right Physical Button
|
|
* bit 0: Left physical Button
|
|
*/
|
|
#define REG_OP_DATA1 0x01
|
|
#define OP_DATA_VALID 0x08
|
|
#define OP_DATA_MIDDLE_BTN 0x04
|
|
#define OP_DATA_RIGHT_BTN 0x02
|
|
#define OP_DATA_LEFT_BTN 0x01
|
|
#define OP_DATA_BTN_MASK (OP_DATA_MIDDLE_BTN | OP_DATA_RIGHT_BTN | \
|
|
OP_DATA_LEFT_BTN)
|
|
|
|
/*
|
|
* Write-only command file register used to issue commands and
|
|
* parameters to the bootloader.
|
|
* The default value read from it is always 0x00.
|
|
*/
|
|
#define REG_BL_FILE 0x00
|
|
#define BL_FILE 0x00
|
|
|
|
/*
|
|
* Bootloader Status Register
|
|
*
|
|
* bit 7: Busy
|
|
* bit 6 - 5: Reserved
|
|
* bit 4: Bootloader running
|
|
* bit 3 - 2: Reserved
|
|
* bit 1: Watchdog Reset
|
|
* bit 0: Checksum valid
|
|
*/
|
|
#define REG_BL_STATUS 0x01
|
|
#define BL_STATUS_REV_6_5 0x60
|
|
#define BL_STATUS_BUSY 0x80
|
|
#define BL_STATUS_RUNNING 0x10
|
|
#define BL_STATUS_REV_3_2 0x0c
|
|
#define BL_STATUS_WATCHDOG 0x02
|
|
#define BL_STATUS_CSUM_VALID 0x01
|
|
#define BL_STATUS_REV_MASK (BL_STATUS_WATCHDOG | BL_STATUS_REV_3_2 | \
|
|
BL_STATUS_REV_6_5)
|
|
|
|
/*
|
|
* Bootloader Error Register
|
|
*
|
|
* bit 7: Invalid
|
|
* bit 6: Invalid security key
|
|
* bit 5: Bootloading
|
|
* bit 4: Command checksum
|
|
* bit 3: Flash protection error
|
|
* bit 2: Flash checksum error
|
|
* bit 1 - 0: Reserved
|
|
*/
|
|
#define REG_BL_ERROR 0x02
|
|
#define BL_ERROR_INVALID 0x80
|
|
#define BL_ERROR_INVALID_KEY 0x40
|
|
#define BL_ERROR_BOOTLOADING 0x20
|
|
#define BL_ERROR_CMD_CSUM 0x10
|
|
#define BL_ERROR_FLASH_PROT 0x08
|
|
#define BL_ERROR_FLASH_CSUM 0x04
|
|
#define BL_ERROR_RESERVED 0x03
|
|
#define BL_ERROR_NO_ERR_IDLE 0x00
|
|
#define BL_ERROR_NO_ERR_ACTIVE (BL_ERROR_BOOTLOADING)
|
|
|
|
#define CAPABILITY_BTN_SHIFT 3
|
|
#define CAPABILITY_LEFT_BTN_MASK (0x01 << 3)
|
|
#define CAPABILITY_RIGHT_BTN_MASK (0x01 << 4)
|
|
#define CAPABILITY_MIDDLE_BTN_MASK (0x01 << 5)
|
|
#define CAPABILITY_BTN_MASK (CAPABILITY_LEFT_BTN_MASK | \
|
|
CAPABILITY_RIGHT_BTN_MASK | \
|
|
CAPABILITY_MIDDLE_BTN_MASK)
|
|
|
|
#define PWR_MODE_MASK 0xfc
|
|
#define PWR_MODE_FULL_ACTIVE (0x3f << 2)
|
|
#define PWR_MODE_IDLE (0x03 << 2) /* Default rt suspend scanrate: 30ms */
|
|
#define PWR_MODE_SLEEP (0x05 << 2) /* Default suspend scanrate: 50ms */
|
|
#define PWR_MODE_BTN_ONLY (0x01 << 2)
|
|
#define PWR_MODE_OFF (0x00 << 2)
|
|
|
|
#define PWR_STATUS_MASK 0x0c
|
|
#define PWR_STATUS_ACTIVE (0x03 << 2)
|
|
#define PWR_STATUS_IDLE (0x02 << 2)
|
|
#define PWR_STATUS_BTN_ONLY (0x01 << 2)
|
|
#define PWR_STATUS_OFF (0x00 << 2)
|
|
|
|
#define AUTOSUSPEND_DELAY 2000 /* unit : ms */
|
|
|
|
#define UNINIT_SLEEP_TIME 0xFFFF
|
|
#define UNINIT_PWR_MODE 0xFF
|
|
|
|
#define BTN_ONLY_MODE_NAME "buttononly"
|
|
#define OFF_MODE_NAME "off"
|
|
|
|
/* The touch.id is used as the MT slot id, thus max MT slot is 15 */
|
|
#define CYAPA_MAX_MT_SLOTS 15
|
|
|
|
struct cyapa;
|
|
|
|
typedef bool (*cb_sort)(struct cyapa *, u8 *, int);
|
|
|
|
struct cyapa_dev_ops {
|
|
int (*check_fw)(struct cyapa *, const struct firmware *);
|
|
int (*bl_enter)(struct cyapa *);
|
|
int (*bl_activate)(struct cyapa *);
|
|
int (*bl_initiate)(struct cyapa *, const struct firmware *);
|
|
int (*update_fw)(struct cyapa *, const struct firmware *);
|
|
int (*bl_deactivate)(struct cyapa *);
|
|
|
|
ssize_t (*show_baseline)(struct device *,
|
|
struct device_attribute *, char *);
|
|
ssize_t (*calibrate_store)(struct device *,
|
|
struct device_attribute *, const char *, size_t);
|
|
|
|
int (*initialize)(struct cyapa *cyapa);
|
|
|
|
int (*state_parse)(struct cyapa *cyapa, u8 *reg_status, int len);
|
|
int (*operational_check)(struct cyapa *cyapa);
|
|
|
|
int (*irq_handler)(struct cyapa *);
|
|
bool (*irq_cmd_handler)(struct cyapa *);
|
|
int (*sort_empty_output_data)(struct cyapa *,
|
|
u8 *, int *, cb_sort);
|
|
|
|
int (*set_power_mode)(struct cyapa *, u8, u16);
|
|
};
|
|
|
|
struct cyapa_gen5_cmd_states {
|
|
struct mutex cmd_lock;
|
|
struct completion cmd_ready;
|
|
atomic_t cmd_issued;
|
|
u8 in_progress_cmd;
|
|
bool is_irq_mode;
|
|
|
|
cb_sort resp_sort_func;
|
|
u8 *resp_data;
|
|
int *resp_len;
|
|
|
|
u8 irq_cmd_buf[CYAPA_REG_MAP_SIZE];
|
|
u8 empty_buf[CYAPA_REG_MAP_SIZE];
|
|
};
|
|
|
|
union cyapa_cmd_states {
|
|
struct cyapa_gen5_cmd_states gen5;
|
|
};
|
|
|
|
enum cyapa_state {
|
|
CYAPA_STATE_NO_DEVICE,
|
|
CYAPA_STATE_BL_BUSY,
|
|
CYAPA_STATE_BL_IDLE,
|
|
CYAPA_STATE_BL_ACTIVE,
|
|
CYAPA_STATE_OP,
|
|
CYAPA_STATE_GEN5_BL,
|
|
CYAPA_STATE_GEN5_APP,
|
|
};
|
|
|
|
/* The main device structure */
|
|
struct cyapa {
|
|
enum cyapa_state state;
|
|
u8 status[BL_STATUS_SIZE];
|
|
bool operational; /* true: ready for data reporting; false: not. */
|
|
|
|
struct i2c_client *client;
|
|
struct input_dev *input;
|
|
char phys[32]; /* Device physical location */
|
|
bool irq_wake; /* Irq wake is enabled */
|
|
bool smbus;
|
|
|
|
/* power mode settings */
|
|
u8 suspend_power_mode;
|
|
u16 suspend_sleep_time;
|
|
u8 runtime_suspend_power_mode;
|
|
u16 runtime_suspend_sleep_time;
|
|
u8 dev_pwr_mode;
|
|
u16 dev_sleep_time;
|
|
|
|
/* Read from query data region. */
|
|
char product_id[16];
|
|
u8 fw_maj_ver; /* Firmware major version. */
|
|
u8 fw_min_ver; /* Firmware minor version. */
|
|
u8 btn_capability;
|
|
u8 gen;
|
|
int max_abs_x;
|
|
int max_abs_y;
|
|
int physical_size_x;
|
|
int physical_size_y;
|
|
|
|
/* Used in ttsp and truetouch based trackpad devices. */
|
|
u8 x_origin; /* X Axis Origin: 0 = left side; 1 = rigth side. */
|
|
u8 y_origin; /* Y Axis Origin: 0 = top; 1 = bottom. */
|
|
int electrodes_x; /* Number of electrodes on the X Axis*/
|
|
int electrodes_y; /* Number of electrodes on the Y Axis*/
|
|
int electrodes_rx; /* Number of Rx electrodes */
|
|
int aligned_electrodes_rx; /* 4 aligned */
|
|
int max_z;
|
|
|
|
/*
|
|
* Used to synchronize the access or update the device state.
|
|
* And since update firmware and read firmware image process will take
|
|
* quite long time, maybe more than 10 seconds, so use mutex_lock
|
|
* to sync and wait other interface and detecting are done or ready.
|
|
*/
|
|
struct mutex state_sync_lock;
|
|
|
|
const struct cyapa_dev_ops *ops;
|
|
|
|
union cyapa_cmd_states cmd_states;
|
|
};
|
|
|
|
|
|
ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len,
|
|
u8 *values);
|
|
ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len,
|
|
u8 *values);
|
|
|
|
ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values);
|
|
|
|
int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout);
|
|
|
|
u8 cyapa_sleep_time_to_pwr_cmd(u16 sleep_time);
|
|
u16 cyapa_pwr_cmd_to_sleep_time(u8 pwr_mode);
|
|
|
|
|
|
extern const char product_id[];
|
|
extern const struct cyapa_dev_ops cyapa_gen3_ops;
|
|
extern const struct cyapa_dev_ops cyapa_gen5_ops;
|
|
|
|
#endif
|