mirror of https://gitee.com/openkylin/linux.git
67 lines
2.7 KiB
Plaintext
67 lines
2.7 KiB
Plaintext
PM Quality Of Service Interface.
|
|
|
|
This interface provides a kernel and user mode interface for registering
|
|
performance expectations by drivers, subsystems and user space applications on
|
|
one of the parameters.
|
|
|
|
Currently we have {cpu_dma_latency, network_latency, network_throughput} as the
|
|
initial set of pm_qos parameters.
|
|
|
|
Each parameters have defined units:
|
|
* latency: usec
|
|
* timeout: usec
|
|
* throughput: kbs (kilo bit / sec)
|
|
|
|
The infrastructure exposes multiple misc device nodes one per implemented
|
|
parameter. The set of parameters implement is defined by pm_qos_power_init()
|
|
and pm_qos_params.h. This is done because having the available parameters
|
|
being runtime configurable or changeable from a driver was seen as too easy to
|
|
abuse.
|
|
|
|
For each parameter a list of performance requests is maintained along with
|
|
an aggregated target value. The aggregated target value is updated with
|
|
changes to the request list or elements of the list. Typically the
|
|
aggregated target value is simply the max or min of the request values held
|
|
in the parameter list elements.
|
|
|
|
From kernel mode the use of this interface is simple:
|
|
|
|
handle = pm_qos_add_request(param_class, target_value):
|
|
Will insert an element into the list for that identified PM_QOS class with the
|
|
target value. Upon change to this list the new target is recomputed and any
|
|
registered notifiers are called only if the target value is now different.
|
|
Clients of pm_qos need to save the returned handle.
|
|
|
|
void pm_qos_update_request(handle, new_target_value):
|
|
Will update the list element pointed to by the handle with the new target value
|
|
and recompute the new aggregated target, calling the notification tree if the
|
|
target is changed.
|
|
|
|
void pm_qos_remove_request(handle):
|
|
Will remove the element. After removal it will update the aggregate target and
|
|
call the notification tree if the target was changed as a result of removing
|
|
the request.
|
|
|
|
|
|
From user mode:
|
|
Only processes can register a pm_qos request. To provide for automatic
|
|
cleanup of a process, the interface requires the process to register its
|
|
parameter requests in the following way:
|
|
|
|
To register the default pm_qos target for the specific parameter, the process
|
|
must open one of /dev/[cpu_dma_latency, network_latency, network_throughput]
|
|
|
|
As long as the device node is held open that process has a registered
|
|
request on the parameter.
|
|
|
|
To change the requested target value the process needs to write an s32 value to
|
|
the open device node. Alternatively the user mode program could write a hex
|
|
string for the value using 10 char long format e.g. "0x12345678". This
|
|
translates to a pm_qos_update_request call.
|
|
|
|
To remove the user mode request for a target value simply close the device
|
|
node.
|
|
|
|
|
|
|