openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/wireless/iwlwifi/iwl-power.c

805 lines
26 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-commands.h"
#include "iwl-debug.h"
#include "iwl-power.h"
/*
* Setting power level allow the card to go to sleep when not busy.
*
* The power level is set to INDEX_1 (the least deep state) by
* default, and will, in the future, be the deepest state unless
* otherwise required by pm_qos network latency requirements.
*
* Using INDEX_1 without pm_qos is ok because mac80211 will disable
* PS when even checking every beacon for the TIM bit would exceed
* the required latency.
*/
#define IWL_POWER_RANGE_0_MAX (2)
#define IWL_POWER_RANGE_1_MAX (10)
#define NOSLP cpu_to_le16(0), 0, 0
#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
#define TU_TO_USEC 1024
#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
cpu_to_le32(X1), \
cpu_to_le32(X2), \
cpu_to_le32(X3), \
cpu_to_le32(X4)}
/* default power management (not Tx power) table values */
/* for DTIM period 0 through IWL_POWER_RANGE_0_MAX */
static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
};
/* for DTIM period IWL_POWER_RANGE_0_MAX + 1 through IWL_POWER_RANGE_1_MAX */
static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
};
/* for DTIM period > IWL_POWER_RANGE_1_MAX */
static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
{{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
};
/* default Thermal Throttling transaction table
* Current state | Throttling Down | Throttling Up
*=============================================================================
* Condition Nxt State Condition Nxt State Condition Nxt State
*-----------------------------------------------------------------------------
* IWL_TI_0 T >= 115 CT_KILL 115>T>=105 TI_1 N/A N/A
* IWL_TI_1 T >= 115 CT_KILL 115>T>=110 TI_2 T<=95 TI_0
* IWL_TI_2 T >= 115 CT_KILL T<=100 TI_1
* IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
*=============================================================================
*/
static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = {
{IWL_TI_0, IWL_ABSOLUTE_ZERO, 104},
{IWL_TI_1, 105, CT_KILL_THRESHOLD},
{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
};
static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = {
{IWL_TI_0, IWL_ABSOLUTE_ZERO, 95},
{IWL_TI_2, 110, CT_KILL_THRESHOLD},
{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
};
static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = {
{IWL_TI_1, IWL_ABSOLUTE_ZERO, 100},
{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
};
static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = {
{IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD},
{IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
{IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
};
/* Advance Thermal Throttling default restriction table */
static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = {
{IWL_TX_MULTI, true, IWL_RX_MULTI},
{IWL_TX_SINGLE, true, IWL_RX_MULTI},
{IWL_TX_SINGLE, false, IWL_RX_SINGLE},
{IWL_TX_NONE, false, IWL_RX_NONE}
};
/* set card power command */
static int iwl_set_power(struct iwl_priv *priv, void *cmd)
{
return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
sizeof(struct iwl_powertable_cmd), cmd);
}
/* initialize to default */
static void iwl_power_init_handle(struct iwl_priv *priv)
{
struct iwl_power_mgr *pow_data;
int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_NUM;
struct iwl_powertable_cmd *cmd;
int i;
u16 lctl;
IWL_DEBUG_POWER(priv, "Initialize power \n");
pow_data = &priv->power_data;
memset(pow_data, 0, sizeof(*pow_data));
memcpy(&pow_data->pwr_range_0[0], &range_0[0], size);
memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
memcpy(&pow_data->pwr_range_2[0], &range_2[0], size);
lctl = iwl_pcie_link_ctl(priv);
IWL_DEBUG_POWER(priv, "adjust power command flags\n");
for (i = 0; i < IWL_POWER_NUM; i++) {
cmd = &pow_data->pwr_range_0[i].cmd;
if (lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN)
cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
else
cmd->flags |= IWL_POWER_PCI_PM_MSK;
}
}
/* adjust power command according to DTIM period and power level*/
static int iwl_update_power_cmd(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd, u16 mode)
{
struct iwl_power_vec_entry *range;
struct iwl_power_mgr *pow_data;
int i;
u32 max_sleep = 0;
u8 period;
bool skip;
if (mode > IWL_POWER_INDEX_5) {
IWL_DEBUG_POWER(priv, "Error invalid power mode \n");
return -EINVAL;
}
pow_data = &priv->power_data;
if (pow_data->dtim_period <= IWL_POWER_RANGE_0_MAX)
range = &pow_data->pwr_range_0[0];
else if (pow_data->dtim_period <= IWL_POWER_RANGE_1_MAX)
range = &pow_data->pwr_range_1[0];
else
range = &pow_data->pwr_range_2[0];
period = pow_data->dtim_period;
memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd));
if (period == 0) {
period = 1;
skip = false;
} else {
skip = !!range[mode].no_dtim;
}
if (skip) {
__le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
max_sleep = le32_to_cpu(slp_itrvl);
if (max_sleep == 0xFF)
max_sleep = period * (skip + 1);
else if (max_sleep > period)
max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
} else {
max_sleep = period;
cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
}
for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
le32_to_cpu(cmd->sleep_interval[0]),
le32_to_cpu(cmd->sleep_interval[1]),
le32_to_cpu(cmd->sleep_interval[2]),
le32_to_cpu(cmd->sleep_interval[3]),
le32_to_cpu(cmd->sleep_interval[4]));
return 0;
}
/*
* compute the final power mode index
*/
int iwl_power_update_mode(struct iwl_priv *priv, bool force)
{
struct iwl_power_mgr *setting = &(priv->power_data);
int ret = 0;
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
u16 uninitialized_var(final_mode);
bool update_chains;
/* Don't update the RX chain when chain noise calibration is running */
update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
final_mode = priv->power_data.user_power_setting;
if (setting->power_disabled)
final_mode = IWL_POWER_MODE_CAM;
if (tt->state >= IWL_TI_1) {
/* TT power setting overwrite user & system power setting */
final_mode = tt->tt_power_mode;
}
if (iwl_is_ready_rf(priv) &&
((setting->power_mode != final_mode) || force)) {
struct iwl_powertable_cmd cmd;
if (final_mode != IWL_POWER_MODE_CAM)
set_bit(STATUS_POWER_PMI, &priv->status);
iwl_update_power_cmd(priv, &cmd, final_mode);
cmd.keep_alive_beacons = 0;
if (final_mode == IWL_POWER_INDEX_5)
cmd.flags |= IWL_POWER_FAST_PD;
ret = iwl_set_power(priv, &cmd);
if (final_mode == IWL_POWER_MODE_CAM)
clear_bit(STATUS_POWER_PMI, &priv->status);
if (priv->cfg->ops->lib->update_chain_flags && update_chains)
priv->cfg->ops->lib->update_chain_flags(priv);
else
IWL_DEBUG_POWER(priv, "Cannot update the power, chain noise "
"calibration running: %d\n",
priv->chain_noise_data.state);
if (!ret)
setting->power_mode = final_mode;
}
return ret;
}
EXPORT_SYMBOL(iwl_power_update_mode);
/* set user_power_setting */
int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode)
{
if (mode >= IWL_POWER_NUM)
return -EINVAL;
priv->power_data.user_power_setting = mode;
return iwl_power_update_mode(priv, 0);
}
EXPORT_SYMBOL(iwl_power_set_user_mode);
bool iwl_ht_enabled(struct iwl_priv *priv)
{
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
struct iwl_tt_restriction *restriction;
if (!priv->power_data.adv_tt)
return true;
restriction = tt->restriction + tt->state;
return restriction->is_ht;
}
EXPORT_SYMBOL(iwl_ht_enabled);
u8 iwl_tx_ant_restriction(struct iwl_priv *priv)
{
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
struct iwl_tt_restriction *restriction;
if (!priv->power_data.adv_tt)
return IWL_TX_MULTI;
restriction = tt->restriction + tt->state;
return restriction->tx_stream;
}
EXPORT_SYMBOL(iwl_tx_ant_restriction);
u8 iwl_rx_ant_restriction(struct iwl_priv *priv)
{
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
struct iwl_tt_restriction *restriction;
if (!priv->power_data.adv_tt)
return IWL_RX_MULTI;
restriction = tt->restriction + tt->state;
return restriction->rx_stream;
}
EXPORT_SYMBOL(iwl_rx_ant_restriction);
#define CT_KILL_EXIT_DURATION (5) /* 5 seconds duration */
/*
* toggle the bit to wake up uCode and check the temperature
* if the temperature is below CT, uCode will stay awake and send card
* state notification with CT_KILL bit clear to inform Thermal Throttling
* Management to change state. Otherwise, uCode will go back to sleep
* without doing anything, driver should continue the 5 seconds timer
* to wake up uCode for temperature check until temperature drop below CT
*/
static void iwl_tt_check_exit_ct_kill(unsigned long data)
{
struct iwl_priv *priv = (struct iwl_priv *)data;
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
unsigned long flags;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (tt->state == IWL_TI_CT_KILL) {
if (priv->power_data.ct_kill_toggle) {
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
priv->power_data.ct_kill_toggle = false;
} else {
iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
priv->power_data.ct_kill_toggle = true;
}
iwl_read32(priv, CSR_UCODE_DRV_GP1);
spin_lock_irqsave(&priv->reg_lock, flags);
if (!iwl_grab_nic_access(priv))
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->reg_lock, flags);
/* Reschedule the ct_kill timer to occur in
* CT_KILL_EXIT_DURATION seconds to ensure we get a
* thermal update */
mod_timer(&priv->power_data.ct_kill_exit_tm, jiffies +
CT_KILL_EXIT_DURATION * HZ);
}
}
static void iwl_perform_ct_kill_task(struct iwl_priv *priv,
bool stop)
{
if (stop) {
IWL_DEBUG_POWER(priv, "Stop all queues\n");
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
IWL_DEBUG_POWER(priv,
"Schedule 5 seconds CT_KILL Timer\n");
mod_timer(&priv->power_data.ct_kill_exit_tm, jiffies +
CT_KILL_EXIT_DURATION * HZ);
} else {
IWL_DEBUG_POWER(priv, "Wake all queues\n");
if (priv->mac80211_registered)
ieee80211_wake_queues(priv->hw);
}
}
#define IWL_MINIMAL_POWER_THRESHOLD (CT_KILL_THRESHOLD_LEGACY)
#define IWL_REDUCED_PERFORMANCE_THRESHOLD_2 (100)
#define IWL_REDUCED_PERFORMANCE_THRESHOLD_1 (90)
/*
* Legacy thermal throttling
* 1) Avoid NIC destruction due to high temperatures
* Chip will identify dangerously high temperatures that can
* harm the device and will power down
* 2) Avoid the NIC power down due to high temperature
* Throttle early enough to lower the power consumption before
* drastic steps are needed
*/
static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp)
{
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
enum iwl_tt_state new_state;
struct iwl_power_mgr *setting = &priv->power_data;
#ifdef CONFIG_IWLWIFI_DEBUG
if ((tt->tt_previous_temp) &&
(temp > tt->tt_previous_temp) &&
((temp - tt->tt_previous_temp) >
IWL_TT_INCREASE_MARGIN)) {
IWL_DEBUG_POWER(priv,
"Temperature increase %d degree Celsius\n",
(temp - tt->tt_previous_temp));
}
#endif
/* in Celsius */
if (temp >= IWL_MINIMAL_POWER_THRESHOLD)
new_state = IWL_TI_CT_KILL;
else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2)
new_state = IWL_TI_2;
else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1)
new_state = IWL_TI_1;
else
new_state = IWL_TI_0;
#ifdef CONFIG_IWLWIFI_DEBUG
tt->tt_previous_temp = temp;
#endif
if (tt->state != new_state) {
if (tt->state == IWL_TI_0) {
tt->sys_power_mode = setting->power_mode;
IWL_DEBUG_POWER(priv, "current power mode: %u\n",
setting->power_mode);
}
switch (new_state) {
case IWL_TI_0:
/* when system ready to go back to IWL_TI_0 state
* using system power mode instead of TT power mode
* revert back to the orginal power mode which was saved
* before enter Thermal Throttling state
* update priv->power_data.user_power_setting to the
* required power mode to make sure
* iwl_power_update_mode() will update power correctly.
*/
priv->power_data.user_power_setting =
tt->sys_power_mode;
tt->tt_power_mode = tt->sys_power_mode;
break;
case IWL_TI_1:
tt->tt_power_mode = IWL_POWER_INDEX_3;
break;
case IWL_TI_2:
tt->tt_power_mode = IWL_POWER_INDEX_4;
break;
default:
tt->tt_power_mode = IWL_POWER_INDEX_5;
break;
}
if (iwl_power_update_mode(priv, true)) {
/* TT state not updated
* try again during next temperature read
*/
IWL_ERR(priv, "Cannot update power mode, "
"TT state not updated\n");
} else {
if (new_state == IWL_TI_CT_KILL)
iwl_perform_ct_kill_task(priv, true);
else if (tt->state == IWL_TI_CT_KILL &&
new_state != IWL_TI_CT_KILL)
iwl_perform_ct_kill_task(priv, false);
tt->state = new_state;
IWL_DEBUG_POWER(priv, "Temperature state changed %u\n",
tt->state);
IWL_DEBUG_POWER(priv, "Power Index change to %u\n",
tt->tt_power_mode);
}
}
}
/*
* Advance thermal throttling
* 1) Avoid NIC destruction due to high temperatures
* Chip will identify dangerously high temperatures that can
* harm the device and will power down
* 2) Avoid the NIC power down due to high temperature
* Throttle early enough to lower the power consumption before
* drastic steps are needed
* Actions include relaxing the power down sleep thresholds and
* decreasing the number of TX streams
* 3) Avoid throughput performance impact as much as possible
*
*=============================================================================
* Condition Nxt State Condition Nxt State Condition Nxt State
*-----------------------------------------------------------------------------
* IWL_TI_0 T >= 115 CT_KILL 115>T>=105 TI_1 N/A N/A
* IWL_TI_1 T >= 115 CT_KILL 115>T>=110 TI_2 T<=95 TI_0
* IWL_TI_2 T >= 115 CT_KILL T<=100 TI_1
* IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
*=============================================================================
*/
static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp)
{
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
int i;
bool changed = false;
enum iwl_tt_state old_state;
struct iwl_tt_trans *transaction;
old_state = tt->state;
for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) {
/* based on the current TT state,
* find the curresponding transaction table
* each table has (IWL_TI_STATE_MAX - 1) entries
* tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1))
* will advance to the correct table.
* then based on the current temperature
* find the next state need to transaction to
* go through all the possible (IWL_TI_STATE_MAX - 1) entries
* in the current table to see if transaction is needed
*/
transaction = tt->transaction +
((old_state * (IWL_TI_STATE_MAX - 1)) + i);
if (temp >= transaction->tt_low &&
temp <= transaction->tt_high) {
#ifdef CONFIG_IWLWIFI_DEBUG
if ((tt->tt_previous_temp) &&
(temp > tt->tt_previous_temp) &&
((temp - tt->tt_previous_temp) >
IWL_TT_INCREASE_MARGIN)) {
IWL_DEBUG_POWER(priv,
"Temperature increase %d "
"degree Celsius\n",
(temp - tt->tt_previous_temp));
}
tt->tt_previous_temp = temp;
#endif
if (old_state !=
transaction->next_state) {
changed = true;
tt->state =
transaction->next_state;
}
break;
}
}
if (changed) {
struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
struct iwl_power_mgr *setting = &priv->power_data;
if (tt->state >= IWL_TI_1) {
/* if switching from IWL_TI_0 to other TT state
* save previous power setting in tt->sys_power_mode */
if (old_state == IWL_TI_0)
tt->sys_power_mode = setting->power_mode;
/* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */
tt->tt_power_mode = IWL_POWER_INDEX_5;
if (!iwl_ht_enabled(priv))
/* disable HT */
rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
RXON_FLG_HT40_PROT_MSK |
RXON_FLG_HT_PROT_MSK);
else {
/* check HT capability and set
* according to the system HT capability
* in case get disabled before */
iwl_set_rxon_ht(priv, &priv->current_ht_config);
}
} else {
/* restore system power setting */
/* the previous power mode was saved in
* tt->sys_power_mode when system move into
* Thermal Throttling state
* set power_data.user_power_setting to the previous
* system power mode to make sure power will get
* updated correctly
*/
priv->power_data.user_power_setting =
tt->sys_power_mode;
tt->tt_power_mode = tt->sys_power_mode;
/* check HT capability and set
* according to the system HT capability
* in case get disabled before */
iwl_set_rxon_ht(priv, &priv->current_ht_config);
}
if (iwl_power_update_mode(priv, true)) {
/* TT state not updated
* try again during next temperature read
*/
IWL_ERR(priv, "Cannot update power mode, "
"TT state not updated\n");
tt->state = old_state;
} else {
IWL_DEBUG_POWER(priv,
"Thermal Throttling to new state: %u\n",
tt->state);
if (old_state != IWL_TI_CT_KILL &&
tt->state == IWL_TI_CT_KILL) {
IWL_DEBUG_POWER(priv, "Enter IWL_TI_CT_KILL\n");
iwl_perform_ct_kill_task(priv, true);
} else if (old_state == IWL_TI_CT_KILL &&
tt->state != IWL_TI_CT_KILL) {
IWL_DEBUG_POWER(priv, "Exit IWL_TI_CT_KILL\n");
iwl_perform_ct_kill_task(priv, false);
}
}
}
}
/* Card State Notification indicated reach critical temperature
* if PSP not enable, no Thermal Throttling function will be performed
* just set the GP1 bit to acknowledge the event
* otherwise, go into IWL_TI_CT_KILL state
* since Card State Notification will not provide any temperature reading
* for Legacy mode
* so just pass the CT_KILL temperature to iwl_legacy_tt_handler()
* for advance mode
* pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state
*/
void iwl_tt_enter_ct_kill(struct iwl_priv *priv)
{
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (tt->state != IWL_TI_CT_KILL) {
IWL_ERR(priv, "Device reached critical temperature "
"- ucode going to sleep!\n");
if (!priv->power_data.adv_tt)
iwl_legacy_tt_handler(priv,
IWL_MINIMAL_POWER_THRESHOLD);
else
iwl_advance_tt_handler(priv,
CT_KILL_THRESHOLD + 1);
}
}
EXPORT_SYMBOL(iwl_tt_enter_ct_kill);
/* Card State Notification indicated out of critical temperature
* since Card State Notification will not provide any temperature reading
* so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature
* to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state
*/
void iwl_tt_exit_ct_kill(struct iwl_priv *priv)
{
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* stop ct_kill_exit_tm timer */
del_timer_sync(&priv->power_data.ct_kill_exit_tm);
if (tt->state == IWL_TI_CT_KILL) {
IWL_ERR(priv,
"Device temperature below critical"
"- ucode awake!\n");
if (!priv->power_data.adv_tt)
iwl_legacy_tt_handler(priv,
IWL_REDUCED_PERFORMANCE_THRESHOLD_2);
else
iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD);
}
}
EXPORT_SYMBOL(iwl_tt_exit_ct_kill);
void iwl_tt_handler(struct iwl_priv *priv)
{
s32 temp = priv->temperature; /* degrees CELSIUS except 4965 */
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
temp = KELVIN_TO_CELSIUS(priv->temperature);
if (!priv->power_data.adv_tt)
iwl_legacy_tt_handler(priv, temp);
else
iwl_advance_tt_handler(priv, temp);
}
EXPORT_SYMBOL(iwl_tt_handler);
/* Thermal throttling initialization
* For advance thermal throttling:
* Initialize Thermal Index and temperature threshold table
* Initialize thermal throttling restriction table
*/
void iwl_tt_initialize(struct iwl_priv *priv)
{
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
struct iwl_power_mgr *setting = &priv->power_data;
int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
struct iwl_tt_trans *transaction;
IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling \n");
memset(tt, 0, sizeof(struct iwl_tt_mgmt));
tt->state = IWL_TI_0;
tt->sys_power_mode = setting->power_mode;
tt->tt_power_mode = tt->sys_power_mode;
init_timer(&priv->power_data.ct_kill_exit_tm);
priv->power_data.ct_kill_exit_tm.data = (unsigned long)priv;
priv->power_data.ct_kill_exit_tm.function = iwl_tt_check_exit_ct_kill;
switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
case CSR_HW_REV_TYPE_6x00:
case CSR_HW_REV_TYPE_6x50:
IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n");
tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) *
IWL_TI_STATE_MAX, GFP_KERNEL);
tt->transaction = kzalloc(sizeof(struct iwl_tt_trans) *
IWL_TI_STATE_MAX * (IWL_TI_STATE_MAX - 1),
GFP_KERNEL);
if (!tt->restriction || !tt->transaction) {
IWL_ERR(priv, "Fallback to Legacy Throttling\n");
priv->power_data.adv_tt = false;
kfree(tt->restriction);
tt->restriction = NULL;
kfree(tt->transaction);
tt->transaction = NULL;
} else {
transaction = tt->transaction +
(IWL_TI_0 * (IWL_TI_STATE_MAX - 1));
memcpy(transaction, &tt_range_0[0], size);
transaction = tt->transaction +
(IWL_TI_1 * (IWL_TI_STATE_MAX - 1));
memcpy(transaction, &tt_range_1[0], size);
transaction = tt->transaction +
(IWL_TI_2 * (IWL_TI_STATE_MAX - 1));
memcpy(transaction, &tt_range_2[0], size);
transaction = tt->transaction +
(IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1));
memcpy(transaction, &tt_range_3[0], size);
size = sizeof(struct iwl_tt_restriction) *
IWL_TI_STATE_MAX;
memcpy(tt->restriction,
&restriction_range[0], size);
priv->power_data.adv_tt = true;
}
break;
default:
IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n");
priv->power_data.adv_tt = false;
break;
}
}
EXPORT_SYMBOL(iwl_tt_initialize);
/* cleanup thermal throttling management related memory and timer */
void iwl_tt_exit(struct iwl_priv *priv)
{
struct iwl_tt_mgmt *tt = &priv->power_data.tt;
/* stop ct_kill_exit_tm timer if activated */
del_timer_sync(&priv->power_data.ct_kill_exit_tm);
if (priv->power_data.adv_tt) {
/* free advance thermal throttling memory */
kfree(tt->restriction);
tt->restriction = NULL;
kfree(tt->transaction);
tt->transaction = NULL;
}
}
EXPORT_SYMBOL(iwl_tt_exit);
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
{
iwl_power_init_handle(priv);
priv->power_data.user_power_setting = IWL_POWER_INDEX_1;
/* default to disabled until mac80211 says otherwise */
priv->power_data.power_disabled = 1;
}
EXPORT_SYMBOL(iwl_power_initialize);
Reference in New Issue View Git Blame Copy Permalink