mirror of https://gitee.com/openkylin/linux.git
321 lines
8.1 KiB
C
321 lines
8.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Cristian Birsan <cristian.birsan@microchip.com>
|
|
* Joshua Henderson <joshua.henderson@microchip.com>
|
|
* Copyright (C) 2016 Microchip Technology Inc. All rights reserved.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/traps.h>
|
|
#include <asm/mach-pic32/pic32.h>
|
|
|
|
#define REG_INTCON 0x0000
|
|
#define REG_INTSTAT 0x0020
|
|
#define REG_IFS_OFFSET 0x0040
|
|
#define REG_IEC_OFFSET 0x00C0
|
|
#define REG_IPC_OFFSET 0x0140
|
|
#define REG_OFF_OFFSET 0x0540
|
|
|
|
#define MAJPRI_MASK 0x07
|
|
#define SUBPRI_MASK 0x03
|
|
#define PRIORITY_MASK 0x1F
|
|
|
|
#define PIC32_INT_PRI(pri, subpri) \
|
|
((((pri) & MAJPRI_MASK) << 2) | ((subpri) & SUBPRI_MASK))
|
|
|
|
struct evic_chip_data {
|
|
u32 irq_types[NR_IRQS];
|
|
u32 ext_irqs[8];
|
|
};
|
|
|
|
static struct irq_domain *evic_irq_domain;
|
|
static void __iomem *evic_base;
|
|
|
|
asmlinkage void __weak plat_irq_dispatch(void)
|
|
{
|
|
unsigned int irq, hwirq;
|
|
|
|
hwirq = readl(evic_base + REG_INTSTAT) & 0xFF;
|
|
irq = irq_linear_revmap(evic_irq_domain, hwirq);
|
|
do_IRQ(irq);
|
|
}
|
|
|
|
static struct evic_chip_data *irqd_to_priv(struct irq_data *data)
|
|
{
|
|
return (struct evic_chip_data *)data->domain->host_data;
|
|
}
|
|
|
|
static int pic32_set_ext_polarity(int bit, u32 type)
|
|
{
|
|
/*
|
|
* External interrupts can be either edge rising or edge falling,
|
|
* but not both.
|
|
*/
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
writel(BIT(bit), evic_base + PIC32_SET(REG_INTCON));
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
writel(BIT(bit), evic_base + PIC32_CLR(REG_INTCON));
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pic32_set_type_edge(struct irq_data *data,
|
|
unsigned int flow_type)
|
|
{
|
|
struct evic_chip_data *priv = irqd_to_priv(data);
|
|
int ret;
|
|
int i;
|
|
|
|
if (!(flow_type & IRQ_TYPE_EDGE_BOTH))
|
|
return -EBADR;
|
|
|
|
/* set polarity for external interrupts only */
|
|
for (i = 0; i < ARRAY_SIZE(priv->ext_irqs); i++) {
|
|
if (priv->ext_irqs[i] == data->hwirq) {
|
|
ret = pic32_set_ext_polarity(i, flow_type);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
irqd_set_trigger_type(data, flow_type);
|
|
|
|
return IRQ_SET_MASK_OK;
|
|
}
|
|
|
|
static void pic32_bind_evic_interrupt(int irq, int set)
|
|
{
|
|
writel(set, evic_base + REG_OFF_OFFSET + irq * 4);
|
|
}
|
|
|
|
static void pic32_set_irq_priority(int irq, int priority)
|
|
{
|
|
u32 reg, shift;
|
|
|
|
reg = irq / 4;
|
|
shift = (irq % 4) * 8;
|
|
|
|
writel(PRIORITY_MASK << shift,
|
|
evic_base + PIC32_CLR(REG_IPC_OFFSET + reg * 0x10));
|
|
writel(priority << shift,
|
|
evic_base + PIC32_SET(REG_IPC_OFFSET + reg * 0x10));
|
|
}
|
|
|
|
#define IRQ_REG_MASK(_hwirq, _reg, _mask) \
|
|
do { \
|
|
_reg = _hwirq / 32; \
|
|
_mask = 1 << (_hwirq % 32); \
|
|
} while (0)
|
|
|
|
static int pic32_irq_domain_map(struct irq_domain *d, unsigned int virq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
struct evic_chip_data *priv = d->host_data;
|
|
struct irq_data *data;
|
|
int ret;
|
|
u32 iecclr, ifsclr;
|
|
u32 reg, mask;
|
|
|
|
ret = irq_map_generic_chip(d, virq, hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Piggyback on xlate function to move to an alternate chip as necessary
|
|
* at time of mapping instead of allowing the flow handler/chip to be
|
|
* changed later. This requires all interrupts to be configured through
|
|
* DT.
|
|
*/
|
|
if (priv->irq_types[hw] & IRQ_TYPE_SENSE_MASK) {
|
|
data = irq_domain_get_irq_data(d, virq);
|
|
irqd_set_trigger_type(data, priv->irq_types[hw]);
|
|
irq_setup_alt_chip(data, priv->irq_types[hw]);
|
|
}
|
|
|
|
IRQ_REG_MASK(hw, reg, mask);
|
|
|
|
iecclr = PIC32_CLR(REG_IEC_OFFSET + reg * 0x10);
|
|
ifsclr = PIC32_CLR(REG_IFS_OFFSET + reg * 0x10);
|
|
|
|
/* mask and clear flag */
|
|
writel(mask, evic_base + iecclr);
|
|
writel(mask, evic_base + ifsclr);
|
|
|
|
/* default priority is required */
|
|
pic32_set_irq_priority(hw, PIC32_INT_PRI(2, 0));
|
|
|
|
return ret;
|
|
}
|
|
|
|
int pic32_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
|
|
const u32 *intspec, unsigned int intsize,
|
|
irq_hw_number_t *out_hwirq, unsigned int *out_type)
|
|
{
|
|
struct evic_chip_data *priv = d->host_data;
|
|
|
|
if (WARN_ON(intsize < 2))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(intspec[0] >= NR_IRQS))
|
|
return -EINVAL;
|
|
|
|
*out_hwirq = intspec[0];
|
|
*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
|
|
|
|
priv->irq_types[intspec[0]] = intspec[1] & IRQ_TYPE_SENSE_MASK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops pic32_irq_domain_ops = {
|
|
.map = pic32_irq_domain_map,
|
|
.xlate = pic32_irq_domain_xlate,
|
|
};
|
|
|
|
static void __init pic32_ext_irq_of_init(struct irq_domain *domain)
|
|
{
|
|
struct device_node *node = irq_domain_get_of_node(domain);
|
|
struct evic_chip_data *priv = domain->host_data;
|
|
struct property *prop;
|
|
const __le32 *p;
|
|
u32 hwirq;
|
|
int i = 0;
|
|
const char *pname = "microchip,external-irqs";
|
|
|
|
of_property_for_each_u32(node, pname, prop, p, hwirq) {
|
|
if (i >= ARRAY_SIZE(priv->ext_irqs)) {
|
|
pr_warn("More than %d external irq, skip rest\n",
|
|
ARRAY_SIZE(priv->ext_irqs));
|
|
break;
|
|
}
|
|
|
|
priv->ext_irqs[i] = hwirq;
|
|
i++;
|
|
}
|
|
}
|
|
|
|
static int __init pic32_of_init(struct device_node *node,
|
|
struct device_node *parent)
|
|
{
|
|
struct irq_chip_generic *gc;
|
|
struct evic_chip_data *priv;
|
|
unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
|
|
int nchips, ret;
|
|
int i;
|
|
|
|
nchips = DIV_ROUND_UP(NR_IRQS, 32);
|
|
|
|
evic_base = of_iomap(node, 0);
|
|
if (!evic_base)
|
|
return -ENOMEM;
|
|
|
|
priv = kcalloc(nchips, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv) {
|
|
ret = -ENOMEM;
|
|
goto err_iounmap;
|
|
}
|
|
|
|
evic_irq_domain = irq_domain_add_linear(node, nchips * 32,
|
|
&pic32_irq_domain_ops,
|
|
priv);
|
|
if (!evic_irq_domain) {
|
|
ret = -ENOMEM;
|
|
goto err_free_priv;
|
|
}
|
|
|
|
/*
|
|
* The PIC32 EVIC has a linear list of irqs and the type of each
|
|
* irq is determined by the hardware peripheral the EVIC is arbitrating.
|
|
* These irq types are defined in the datasheet as "persistent" and
|
|
* "non-persistent" which are mapped here to level and edge
|
|
* respectively. To manage the different flow handler requirements of
|
|
* each irq type, different chip_types are used.
|
|
*/
|
|
ret = irq_alloc_domain_generic_chips(evic_irq_domain, 32, 2,
|
|
"evic-level", handle_level_irq,
|
|
clr, 0, 0);
|
|
if (ret)
|
|
goto err_domain_remove;
|
|
|
|
board_bind_eic_interrupt = &pic32_bind_evic_interrupt;
|
|
|
|
for (i = 0; i < nchips; i++) {
|
|
u32 ifsclr = PIC32_CLR(REG_IFS_OFFSET + (i * 0x10));
|
|
u32 iec = REG_IEC_OFFSET + (i * 0x10);
|
|
|
|
gc = irq_get_domain_generic_chip(evic_irq_domain, i * 32);
|
|
|
|
gc->reg_base = evic_base;
|
|
gc->unused = 0;
|
|
|
|
/*
|
|
* Level/persistent interrupts have a special requirement that
|
|
* the condition generating the interrupt be cleared before the
|
|
* interrupt flag (ifs) can be cleared. chip.irq_eoi is used to
|
|
* complete the interrupt with an ack.
|
|
*/
|
|
gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
|
|
gc->chip_types[0].handler = handle_fasteoi_irq;
|
|
gc->chip_types[0].regs.ack = ifsclr;
|
|
gc->chip_types[0].regs.mask = iec;
|
|
gc->chip_types[0].chip.name = "evic-level";
|
|
gc->chip_types[0].chip.irq_eoi = irq_gc_ack_set_bit;
|
|
gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
|
|
gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
|
|
gc->chip_types[0].chip.flags = IRQCHIP_SKIP_SET_WAKE;
|
|
|
|
/* Edge interrupts */
|
|
gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
|
|
gc->chip_types[1].handler = handle_edge_irq;
|
|
gc->chip_types[1].regs.ack = ifsclr;
|
|
gc->chip_types[1].regs.mask = iec;
|
|
gc->chip_types[1].chip.name = "evic-edge";
|
|
gc->chip_types[1].chip.irq_ack = irq_gc_ack_set_bit;
|
|
gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit;
|
|
gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit;
|
|
gc->chip_types[1].chip.irq_set_type = pic32_set_type_edge;
|
|
gc->chip_types[1].chip.flags = IRQCHIP_SKIP_SET_WAKE;
|
|
|
|
gc->private = &priv[i];
|
|
}
|
|
|
|
irq_set_default_host(evic_irq_domain);
|
|
|
|
/*
|
|
* External interrupts have software configurable edge polarity. These
|
|
* interrupts are defined in DT allowing polarity to be configured only
|
|
* for these interrupts when requested.
|
|
*/
|
|
pic32_ext_irq_of_init(evic_irq_domain);
|
|
|
|
return 0;
|
|
|
|
err_domain_remove:
|
|
irq_domain_remove(evic_irq_domain);
|
|
|
|
err_free_priv:
|
|
kfree(priv);
|
|
|
|
err_iounmap:
|
|
iounmap(evic_base);
|
|
|
|
return ret;
|
|
}
|
|
|
|
IRQCHIP_DECLARE(pic32_evic, "microchip,pic32mzda-evic", pic32_of_init);
|