mirror of https://gitee.com/openkylin/linux.git
639 lines
16 KiB
C
639 lines
16 KiB
C
/* $Id: ebus.c,v 1.64 2001/11/08 04:41:33 davem Exp $
|
|
* ebus.c: PCI to EBus bridge device.
|
|
*
|
|
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
|
|
* Copyright (C) 1999 David S. Miller (davem@redhat.com)
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/page.h>
|
|
#include <asm/pbm.h>
|
|
#include <asm/ebus.h>
|
|
#include <asm/oplib.h>
|
|
#include <asm/bpp.h>
|
|
#include <asm/irq.h>
|
|
|
|
/* EBUS dma library. */
|
|
|
|
#define EBDMA_CSR 0x00UL /* Control/Status */
|
|
#define EBDMA_ADDR 0x04UL /* DMA Address */
|
|
#define EBDMA_COUNT 0x08UL /* DMA Count */
|
|
|
|
#define EBDMA_CSR_INT_PEND 0x00000001
|
|
#define EBDMA_CSR_ERR_PEND 0x00000002
|
|
#define EBDMA_CSR_DRAIN 0x00000004
|
|
#define EBDMA_CSR_INT_EN 0x00000010
|
|
#define EBDMA_CSR_RESET 0x00000080
|
|
#define EBDMA_CSR_WRITE 0x00000100
|
|
#define EBDMA_CSR_EN_DMA 0x00000200
|
|
#define EBDMA_CSR_CYC_PEND 0x00000400
|
|
#define EBDMA_CSR_DIAG_RD_DONE 0x00000800
|
|
#define EBDMA_CSR_DIAG_WR_DONE 0x00001000
|
|
#define EBDMA_CSR_EN_CNT 0x00002000
|
|
#define EBDMA_CSR_TC 0x00004000
|
|
#define EBDMA_CSR_DIS_CSR_DRN 0x00010000
|
|
#define EBDMA_CSR_BURST_SZ_MASK 0x000c0000
|
|
#define EBDMA_CSR_BURST_SZ_1 0x00080000
|
|
#define EBDMA_CSR_BURST_SZ_4 0x00000000
|
|
#define EBDMA_CSR_BURST_SZ_8 0x00040000
|
|
#define EBDMA_CSR_BURST_SZ_16 0x000c0000
|
|
#define EBDMA_CSR_DIAG_EN 0x00100000
|
|
#define EBDMA_CSR_DIS_ERR_PEND 0x00400000
|
|
#define EBDMA_CSR_TCI_DIS 0x00800000
|
|
#define EBDMA_CSR_EN_NEXT 0x01000000
|
|
#define EBDMA_CSR_DMA_ON 0x02000000
|
|
#define EBDMA_CSR_A_LOADED 0x04000000
|
|
#define EBDMA_CSR_NA_LOADED 0x08000000
|
|
#define EBDMA_CSR_DEV_ID_MASK 0xf0000000
|
|
|
|
#define EBUS_DMA_RESET_TIMEOUT 10000
|
|
|
|
static void __ebus_dma_reset(struct ebus_dma_info *p, int no_drain)
|
|
{
|
|
int i;
|
|
u32 val = 0;
|
|
|
|
writel(EBDMA_CSR_RESET, p->regs + EBDMA_CSR);
|
|
udelay(1);
|
|
|
|
if (no_drain)
|
|
return;
|
|
|
|
for (i = EBUS_DMA_RESET_TIMEOUT; i > 0; i--) {
|
|
val = readl(p->regs + EBDMA_CSR);
|
|
|
|
if (!(val & (EBDMA_CSR_DRAIN | EBDMA_CSR_CYC_PEND)))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t ebus_dma_irq(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct ebus_dma_info *p = dev_id;
|
|
unsigned long flags;
|
|
u32 csr = 0;
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
csr = readl(p->regs + EBDMA_CSR);
|
|
writel(csr, p->regs + EBDMA_CSR);
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
|
|
if (csr & EBDMA_CSR_ERR_PEND) {
|
|
printk(KERN_CRIT "ebus_dma(%s): DMA error!\n", p->name);
|
|
p->callback(p, EBUS_DMA_EVENT_ERROR, p->client_cookie);
|
|
return IRQ_HANDLED;
|
|
} else if (csr & EBDMA_CSR_INT_PEND) {
|
|
p->callback(p,
|
|
(csr & EBDMA_CSR_TC) ?
|
|
EBUS_DMA_EVENT_DMA : EBUS_DMA_EVENT_DEVICE,
|
|
p->client_cookie);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
int ebus_dma_register(struct ebus_dma_info *p)
|
|
{
|
|
u32 csr;
|
|
|
|
if (!p->regs)
|
|
return -EINVAL;
|
|
if (p->flags & ~(EBUS_DMA_FLAG_USE_EBDMA_HANDLER |
|
|
EBUS_DMA_FLAG_TCI_DISABLE))
|
|
return -EINVAL;
|
|
if ((p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) && !p->callback)
|
|
return -EINVAL;
|
|
if (!strlen(p->name))
|
|
return -EINVAL;
|
|
|
|
__ebus_dma_reset(p, 1);
|
|
|
|
csr = EBDMA_CSR_BURST_SZ_16 | EBDMA_CSR_EN_CNT;
|
|
|
|
if (p->flags & EBUS_DMA_FLAG_TCI_DISABLE)
|
|
csr |= EBDMA_CSR_TCI_DIS;
|
|
|
|
writel(csr, p->regs + EBDMA_CSR);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ebus_dma_register);
|
|
|
|
int ebus_dma_irq_enable(struct ebus_dma_info *p, int on)
|
|
{
|
|
unsigned long flags;
|
|
u32 csr;
|
|
|
|
if (on) {
|
|
if (p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) {
|
|
if (request_irq(p->irq, ebus_dma_irq, SA_SHIRQ, p->name, p))
|
|
return -EBUSY;
|
|
}
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
csr = readl(p->regs + EBDMA_CSR);
|
|
csr |= EBDMA_CSR_INT_EN;
|
|
writel(csr, p->regs + EBDMA_CSR);
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
} else {
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
csr = readl(p->regs + EBDMA_CSR);
|
|
csr &= ~EBDMA_CSR_INT_EN;
|
|
writel(csr, p->regs + EBDMA_CSR);
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
|
|
if (p->flags & EBUS_DMA_FLAG_USE_EBDMA_HANDLER) {
|
|
free_irq(p->irq, p);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ebus_dma_irq_enable);
|
|
|
|
void ebus_dma_unregister(struct ebus_dma_info *p)
|
|
{
|
|
unsigned long flags;
|
|
u32 csr;
|
|
int irq_on = 0;
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
csr = readl(p->regs + EBDMA_CSR);
|
|
if (csr & EBDMA_CSR_INT_EN) {
|
|
csr &= ~EBDMA_CSR_INT_EN;
|
|
writel(csr, p->regs + EBDMA_CSR);
|
|
irq_on = 1;
|
|
}
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
|
|
if (irq_on)
|
|
free_irq(p->irq, p);
|
|
}
|
|
EXPORT_SYMBOL(ebus_dma_unregister);
|
|
|
|
int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr, size_t len)
|
|
{
|
|
unsigned long flags;
|
|
u32 csr;
|
|
int err;
|
|
|
|
if (len >= (1 << 24))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
csr = readl(p->regs + EBDMA_CSR);
|
|
err = -EINVAL;
|
|
if (!(csr & EBDMA_CSR_EN_DMA))
|
|
goto out;
|
|
err = -EBUSY;
|
|
if (csr & EBDMA_CSR_NA_LOADED)
|
|
goto out;
|
|
|
|
writel(len, p->regs + EBDMA_COUNT);
|
|
writel(bus_addr, p->regs + EBDMA_ADDR);
|
|
err = 0;
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(ebus_dma_request);
|
|
|
|
void ebus_dma_prepare(struct ebus_dma_info *p, int write)
|
|
{
|
|
unsigned long flags;
|
|
u32 csr;
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
__ebus_dma_reset(p, 0);
|
|
|
|
csr = (EBDMA_CSR_INT_EN |
|
|
EBDMA_CSR_EN_CNT |
|
|
EBDMA_CSR_BURST_SZ_16 |
|
|
EBDMA_CSR_EN_NEXT);
|
|
|
|
if (write)
|
|
csr |= EBDMA_CSR_WRITE;
|
|
if (p->flags & EBUS_DMA_FLAG_TCI_DISABLE)
|
|
csr |= EBDMA_CSR_TCI_DIS;
|
|
|
|
writel(csr, p->regs + EBDMA_CSR);
|
|
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(ebus_dma_prepare);
|
|
|
|
unsigned int ebus_dma_residue(struct ebus_dma_info *p)
|
|
{
|
|
return readl(p->regs + EBDMA_COUNT);
|
|
}
|
|
EXPORT_SYMBOL(ebus_dma_residue);
|
|
|
|
unsigned int ebus_dma_addr(struct ebus_dma_info *p)
|
|
{
|
|
return readl(p->regs + EBDMA_ADDR);
|
|
}
|
|
EXPORT_SYMBOL(ebus_dma_addr);
|
|
|
|
void ebus_dma_enable(struct ebus_dma_info *p, int on)
|
|
{
|
|
unsigned long flags;
|
|
u32 orig_csr, csr;
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
orig_csr = csr = readl(p->regs + EBDMA_CSR);
|
|
if (on)
|
|
csr |= EBDMA_CSR_EN_DMA;
|
|
else
|
|
csr &= ~EBDMA_CSR_EN_DMA;
|
|
if ((orig_csr & EBDMA_CSR_EN_DMA) !=
|
|
(csr & EBDMA_CSR_EN_DMA))
|
|
writel(csr, p->regs + EBDMA_CSR);
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(ebus_dma_enable);
|
|
|
|
struct linux_ebus *ebus_chain = NULL;
|
|
|
|
#ifdef CONFIG_SUN_AUXIO
|
|
extern void auxio_probe(void);
|
|
#endif
|
|
|
|
static inline void *ebus_alloc(size_t size)
|
|
{
|
|
void *mem;
|
|
|
|
mem = kzalloc(size, GFP_ATOMIC);
|
|
if (!mem)
|
|
panic("ebus_alloc: out of memory");
|
|
return mem;
|
|
}
|
|
|
|
static void __init ebus_ranges_init(struct linux_ebus *ebus)
|
|
{
|
|
int success;
|
|
|
|
ebus->num_ebus_ranges = 0;
|
|
success = prom_getproperty(ebus->prom_node, "ranges",
|
|
(char *)ebus->ebus_ranges,
|
|
sizeof(ebus->ebus_ranges));
|
|
if (success != -1)
|
|
ebus->num_ebus_ranges = (success/sizeof(struct linux_prom_ebus_ranges));
|
|
}
|
|
|
|
static void __init ebus_intmap_init(struct linux_ebus *ebus)
|
|
{
|
|
int success;
|
|
|
|
ebus->num_ebus_intmap = 0;
|
|
success = prom_getproperty(ebus->prom_node, "interrupt-map",
|
|
(char *)ebus->ebus_intmap,
|
|
sizeof(ebus->ebus_intmap));
|
|
if (success == -1)
|
|
return;
|
|
|
|
ebus->num_ebus_intmap = (success/sizeof(struct linux_prom_ebus_intmap));
|
|
|
|
success = prom_getproperty(ebus->prom_node, "interrupt-map-mask",
|
|
(char *)&ebus->ebus_intmask,
|
|
sizeof(ebus->ebus_intmask));
|
|
if (success == -1) {
|
|
prom_printf("%s: can't get interrupt-map-mask\n", __FUNCTION__);
|
|
prom_halt();
|
|
}
|
|
}
|
|
|
|
int __init ebus_intmap_match(struct linux_ebus *ebus,
|
|
struct linux_prom_registers *reg,
|
|
int *interrupt)
|
|
{
|
|
unsigned int hi, lo, irq;
|
|
int i;
|
|
|
|
if (!ebus->num_ebus_intmap)
|
|
return 0;
|
|
|
|
hi = reg->which_io & ebus->ebus_intmask.phys_hi;
|
|
lo = reg->phys_addr & ebus->ebus_intmask.phys_lo;
|
|
irq = *interrupt & ebus->ebus_intmask.interrupt;
|
|
for (i = 0; i < ebus->num_ebus_intmap; i++) {
|
|
if ((ebus->ebus_intmap[i].phys_hi == hi) &&
|
|
(ebus->ebus_intmap[i].phys_lo == lo) &&
|
|
(ebus->ebus_intmap[i].interrupt == irq)) {
|
|
*interrupt = ebus->ebus_intmap[i].cinterrupt;
|
|
return 0;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
void __init fill_ebus_child(int node, struct linux_prom_registers *preg,
|
|
struct linux_ebus_child *dev, int non_standard_regs)
|
|
{
|
|
int regs[PROMREG_MAX];
|
|
int irqs[PROMREG_MAX];
|
|
int i, len;
|
|
|
|
dev->prom_node = node;
|
|
prom_getstring(node, "name", dev->prom_name, sizeof(dev->prom_name));
|
|
printk(" (%s)", dev->prom_name);
|
|
|
|
len = prom_getproperty(node, "reg", (void *)regs, sizeof(regs));
|
|
dev->num_addrs = len / sizeof(regs[0]);
|
|
|
|
if (non_standard_regs) {
|
|
/* This is to handle reg properties which are not
|
|
* in the parent relative format. One example are
|
|
* children of the i2c device on CompactPCI systems.
|
|
*
|
|
* So, for such devices we just record the property
|
|
* raw in the child resources.
|
|
*/
|
|
for (i = 0; i < dev->num_addrs; i++)
|
|
dev->resource[i].start = regs[i];
|
|
} else {
|
|
for (i = 0; i < dev->num_addrs; i++) {
|
|
int rnum = regs[i];
|
|
if (rnum >= dev->parent->num_addrs) {
|
|
prom_printf("UGH: property for %s was %d, need < %d\n",
|
|
dev->prom_name, len, dev->parent->num_addrs);
|
|
panic(__FUNCTION__);
|
|
}
|
|
dev->resource[i].start = dev->parent->resource[i].start;
|
|
dev->resource[i].end = dev->parent->resource[i].end;
|
|
dev->resource[i].flags = IORESOURCE_MEM;
|
|
dev->resource[i].name = dev->prom_name;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < PROMINTR_MAX; i++)
|
|
dev->irqs[i] = PCI_IRQ_NONE;
|
|
|
|
len = prom_getproperty(node, "interrupts", (char *)&irqs, sizeof(irqs));
|
|
if ((len == -1) || (len == 0)) {
|
|
dev->num_irqs = 0;
|
|
/*
|
|
* Oh, well, some PROMs don't export interrupts
|
|
* property to children of EBus devices...
|
|
*
|
|
* Be smart about PS/2 keyboard and mouse.
|
|
*/
|
|
if (!strcmp(dev->parent->prom_name, "8042")) {
|
|
if (!strcmp(dev->prom_name, "kb_ps2")) {
|
|
dev->num_irqs = 1;
|
|
dev->irqs[0] = dev->parent->irqs[0];
|
|
} else {
|
|
dev->num_irqs = 1;
|
|
dev->irqs[0] = dev->parent->irqs[1];
|
|
}
|
|
}
|
|
} else {
|
|
dev->num_irqs = len / sizeof(irqs[0]);
|
|
for (i = 0; i < dev->num_irqs; i++) {
|
|
struct pci_pbm_info *pbm = dev->bus->parent;
|
|
struct pci_controller_info *p = pbm->parent;
|
|
|
|
if (ebus_intmap_match(dev->bus, preg, &irqs[i]) != -1) {
|
|
dev->irqs[i] = p->irq_build(pbm,
|
|
dev->bus->self,
|
|
irqs[i]);
|
|
} else {
|
|
/* If we get a bogus interrupt property, just
|
|
* record the raw value instead of punting.
|
|
*/
|
|
dev->irqs[i] = irqs[i];
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int __init child_regs_nonstandard(struct linux_ebus_device *dev)
|
|
{
|
|
if (!strcmp(dev->prom_name, "i2c") ||
|
|
!strcmp(dev->prom_name, "SUNW,lombus"))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
void __init fill_ebus_device(int node, struct linux_ebus_device *dev)
|
|
{
|
|
struct linux_prom_registers regs[PROMREG_MAX];
|
|
struct linux_ebus_child *child;
|
|
int irqs[PROMINTR_MAX];
|
|
int i, n, len;
|
|
|
|
dev->prom_node = node;
|
|
prom_getstring(node, "name", dev->prom_name, sizeof(dev->prom_name));
|
|
printk(" [%s", dev->prom_name);
|
|
|
|
len = prom_getproperty(node, "reg", (void *)regs, sizeof(regs));
|
|
if (len == -1) {
|
|
dev->num_addrs = 0;
|
|
goto probe_interrupts;
|
|
}
|
|
|
|
if (len % sizeof(struct linux_prom_registers)) {
|
|
prom_printf("UGH: proplen for %s was %d, need multiple of %d\n",
|
|
dev->prom_name, len,
|
|
(int)sizeof(struct linux_prom_registers));
|
|
prom_halt();
|
|
}
|
|
dev->num_addrs = len / sizeof(struct linux_prom_registers);
|
|
|
|
for (i = 0; i < dev->num_addrs; i++) {
|
|
/* XXX Learn how to interpret ebus ranges... -DaveM */
|
|
if (regs[i].which_io >= 0x10)
|
|
n = (regs[i].which_io - 0x10) >> 2;
|
|
else
|
|
n = regs[i].which_io;
|
|
|
|
dev->resource[i].start = dev->bus->self->resource[n].start;
|
|
dev->resource[i].start += (unsigned long)regs[i].phys_addr;
|
|
dev->resource[i].end =
|
|
(dev->resource[i].start + (unsigned long)regs[i].reg_size - 1UL);
|
|
dev->resource[i].flags = IORESOURCE_MEM;
|
|
dev->resource[i].name = dev->prom_name;
|
|
request_resource(&dev->bus->self->resource[n],
|
|
&dev->resource[i]);
|
|
}
|
|
|
|
probe_interrupts:
|
|
for (i = 0; i < PROMINTR_MAX; i++)
|
|
dev->irqs[i] = PCI_IRQ_NONE;
|
|
|
|
len = prom_getproperty(node, "interrupts", (char *)&irqs, sizeof(irqs));
|
|
if ((len == -1) || (len == 0)) {
|
|
dev->num_irqs = 0;
|
|
} else {
|
|
dev->num_irqs = len / sizeof(irqs[0]);
|
|
for (i = 0; i < dev->num_irqs; i++) {
|
|
struct pci_pbm_info *pbm = dev->bus->parent;
|
|
struct pci_controller_info *p = pbm->parent;
|
|
|
|
if (ebus_intmap_match(dev->bus, ®s[0], &irqs[i]) != -1) {
|
|
dev->irqs[i] = p->irq_build(pbm,
|
|
dev->bus->self,
|
|
irqs[i]);
|
|
} else {
|
|
/* If we get a bogus interrupt property, just
|
|
* record the raw value instead of punting.
|
|
*/
|
|
dev->irqs[i] = irqs[i];
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((node = prom_getchild(node))) {
|
|
printk(" ->");
|
|
dev->children = ebus_alloc(sizeof(struct linux_ebus_child));
|
|
|
|
child = dev->children;
|
|
child->next = NULL;
|
|
child->parent = dev;
|
|
child->bus = dev->bus;
|
|
fill_ebus_child(node, ®s[0],
|
|
child, child_regs_nonstandard(dev));
|
|
|
|
while ((node = prom_getsibling(node)) != 0) {
|
|
child->next = ebus_alloc(sizeof(struct linux_ebus_child));
|
|
|
|
child = child->next;
|
|
child->next = NULL;
|
|
child->parent = dev;
|
|
child->bus = dev->bus;
|
|
fill_ebus_child(node, ®s[0],
|
|
child, child_regs_nonstandard(dev));
|
|
}
|
|
}
|
|
printk("]");
|
|
}
|
|
|
|
static struct pci_dev *find_next_ebus(struct pci_dev *start, int *is_rio_p)
|
|
{
|
|
struct pci_dev *pdev = start;
|
|
|
|
while ((pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_ANY_ID, pdev)))
|
|
if (pdev->device == PCI_DEVICE_ID_SUN_EBUS ||
|
|
pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS)
|
|
break;
|
|
|
|
*is_rio_p = !!(pdev && (pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS));
|
|
|
|
return pdev;
|
|
}
|
|
|
|
void __init ebus_init(void)
|
|
{
|
|
struct pci_pbm_info *pbm;
|
|
struct linux_ebus_device *dev;
|
|
struct linux_ebus *ebus;
|
|
struct pci_dev *pdev;
|
|
struct pcidev_cookie *cookie;
|
|
int nd, ebusnd, is_rio;
|
|
int num_ebus = 0;
|
|
|
|
pdev = find_next_ebus(NULL, &is_rio);
|
|
if (!pdev) {
|
|
printk("ebus: No EBus's found.\n");
|
|
return;
|
|
}
|
|
|
|
cookie = pdev->sysdata;
|
|
ebusnd = cookie->prom_node;
|
|
|
|
ebus_chain = ebus = ebus_alloc(sizeof(struct linux_ebus));
|
|
ebus->next = NULL;
|
|
ebus->is_rio = is_rio;
|
|
|
|
while (ebusnd) {
|
|
/* SUNW,pci-qfe uses four empty ebuses on it.
|
|
I think we should not consider them here,
|
|
as they have half of the properties this
|
|
code expects and once we do PCI hot-plug,
|
|
we'd have to tweak with the ebus_chain
|
|
in the runtime after initialization. -jj */
|
|
if (!prom_getchild (ebusnd)) {
|
|
pdev = find_next_ebus(pdev, &is_rio);
|
|
if (!pdev) {
|
|
if (ebus == ebus_chain) {
|
|
ebus_chain = NULL;
|
|
printk("ebus: No EBus's found.\n");
|
|
return;
|
|
}
|
|
break;
|
|
}
|
|
ebus->is_rio = is_rio;
|
|
cookie = pdev->sysdata;
|
|
ebusnd = cookie->prom_node;
|
|
continue;
|
|
}
|
|
printk("ebus%d:", num_ebus);
|
|
|
|
prom_getstring(ebusnd, "name", ebus->prom_name, sizeof(ebus->prom_name));
|
|
ebus->index = num_ebus;
|
|
ebus->prom_node = ebusnd;
|
|
ebus->self = pdev;
|
|
ebus->parent = pbm = cookie->pbm;
|
|
|
|
ebus_ranges_init(ebus);
|
|
ebus_intmap_init(ebus);
|
|
|
|
nd = prom_getchild(ebusnd);
|
|
if (!nd)
|
|
goto next_ebus;
|
|
|
|
ebus->devices = ebus_alloc(sizeof(struct linux_ebus_device));
|
|
|
|
dev = ebus->devices;
|
|
dev->next = NULL;
|
|
dev->children = NULL;
|
|
dev->bus = ebus;
|
|
fill_ebus_device(nd, dev);
|
|
|
|
while ((nd = prom_getsibling(nd)) != 0) {
|
|
dev->next = ebus_alloc(sizeof(struct linux_ebus_device));
|
|
|
|
dev = dev->next;
|
|
dev->next = NULL;
|
|
dev->children = NULL;
|
|
dev->bus = ebus;
|
|
fill_ebus_device(nd, dev);
|
|
}
|
|
|
|
next_ebus:
|
|
printk("\n");
|
|
|
|
pdev = find_next_ebus(pdev, &is_rio);
|
|
if (!pdev)
|
|
break;
|
|
|
|
cookie = pdev->sysdata;
|
|
ebusnd = cookie->prom_node;
|
|
|
|
ebus->next = ebus_alloc(sizeof(struct linux_ebus));
|
|
ebus = ebus->next;
|
|
ebus->next = NULL;
|
|
ebus->is_rio = is_rio;
|
|
++num_ebus;
|
|
}
|
|
pci_dev_put(pdev); /* XXX for the case, when ebusnd is 0, is it OK? */
|
|
|
|
#ifdef CONFIG_SUN_AUXIO
|
|
auxio_probe();
|
|
#endif
|
|
}
|