mirror of https://gitee.com/openkylin/linux.git
468 lines
13 KiB
C
468 lines
13 KiB
C
/*
|
|
* Board support file for OMAP4430 based PandaBoard.
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments
|
|
*
|
|
* Author: David Anders <x0132446@ti.com>
|
|
*
|
|
* Based on mach-omap2/board-4430sdp.c
|
|
*
|
|
* Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* Based on mach-omap2/board-3430sdp.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/mfd/twl6040.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/ti_wilink_st.h>
|
|
#include <linux/usb/musb.h>
|
|
#include <linux/wl12xx.h>
|
|
#include <linux/platform_data/omap-abe-twl6040.h>
|
|
|
|
#include <asm/hardware/gic.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "common.h"
|
|
#include "soc.h"
|
|
#include "mmc.h"
|
|
#include "hsmmc.h"
|
|
#include "control.h"
|
|
#include "mux.h"
|
|
#include "common-board-devices.h"
|
|
#include "dss-common.h"
|
|
|
|
#define GPIO_HUB_POWER 1
|
|
#define GPIO_HUB_NRESET 62
|
|
#define GPIO_WIFI_PMENA 43
|
|
#define GPIO_WIFI_IRQ 53
|
|
|
|
/* wl127x BT, FM, GPS connectivity chip */
|
|
static struct ti_st_plat_data wilink_platform_data = {
|
|
.nshutdown_gpio = 46,
|
|
.dev_name = "/dev/ttyO1",
|
|
.flow_cntrl = 1,
|
|
.baud_rate = 3000000,
|
|
.chip_enable = NULL,
|
|
.suspend = NULL,
|
|
.resume = NULL,
|
|
};
|
|
|
|
static struct platform_device wl1271_device = {
|
|
.name = "kim",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &wilink_platform_data,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led gpio_leds[] = {
|
|
{
|
|
.name = "pandaboard::status1",
|
|
.default_trigger = "heartbeat",
|
|
.gpio = 7,
|
|
},
|
|
{
|
|
.name = "pandaboard::status2",
|
|
.default_trigger = "mmc0",
|
|
.gpio = 8,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data gpio_led_info = {
|
|
.leds = gpio_leds,
|
|
.num_leds = ARRAY_SIZE(gpio_leds),
|
|
};
|
|
|
|
static struct platform_device leds_gpio = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &gpio_led_info,
|
|
},
|
|
};
|
|
|
|
static struct omap_abe_twl6040_data panda_abe_audio_data = {
|
|
/* Audio out */
|
|
.has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
|
|
/* HandsFree through expansion connector */
|
|
.has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
|
|
/* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
|
|
.has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
|
|
/* PandaBoard: FM RX, PandaBoardES: audio in */
|
|
.has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
|
|
/* No jack detection. */
|
|
.jack_detection = 0,
|
|
/* MCLK input is 38.4MHz */
|
|
.mclk_freq = 38400000,
|
|
|
|
};
|
|
|
|
static struct platform_device panda_abe_audio = {
|
|
.name = "omap-abe-twl6040",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &panda_abe_audio_data,
|
|
},
|
|
};
|
|
|
|
static struct platform_device panda_hdmi_audio_codec = {
|
|
.name = "hdmi-audio-codec",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device btwilink_device = {
|
|
.name = "btwilink",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device *panda_devices[] __initdata = {
|
|
&leds_gpio,
|
|
&wl1271_device,
|
|
&panda_abe_audio,
|
|
&panda_hdmi_audio_codec,
|
|
&btwilink_device,
|
|
};
|
|
|
|
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
|
|
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
|
|
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
|
|
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
|
|
.phy_reset = false,
|
|
.reset_gpio_port[0] = -EINVAL,
|
|
.reset_gpio_port[1] = -EINVAL,
|
|
.reset_gpio_port[2] = -EINVAL
|
|
};
|
|
|
|
static struct gpio panda_ehci_gpios[] __initdata = {
|
|
{ GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
|
|
{ GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
|
|
};
|
|
|
|
static void __init omap4_ehci_init(void)
|
|
{
|
|
int ret;
|
|
struct clk *phy_ref_clk;
|
|
|
|
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
|
|
phy_ref_clk = clk_get(NULL, "auxclk3_ck");
|
|
if (IS_ERR(phy_ref_clk)) {
|
|
pr_err("Cannot request auxclk3\n");
|
|
return;
|
|
}
|
|
clk_set_rate(phy_ref_clk, 19200000);
|
|
clk_prepare_enable(phy_ref_clk);
|
|
|
|
/* disable the power to the usb hub prior to init and reset phy+hub */
|
|
ret = gpio_request_array(panda_ehci_gpios,
|
|
ARRAY_SIZE(panda_ehci_gpios));
|
|
if (ret) {
|
|
pr_err("Unable to initialize EHCI power/reset\n");
|
|
return;
|
|
}
|
|
|
|
gpio_export(GPIO_HUB_POWER, 0);
|
|
gpio_export(GPIO_HUB_NRESET, 0);
|
|
gpio_set_value(GPIO_HUB_NRESET, 1);
|
|
|
|
usbhs_init(&usbhs_bdata);
|
|
|
|
/* enable power to hub */
|
|
gpio_set_value(GPIO_HUB_POWER, 1);
|
|
}
|
|
|
|
static struct omap_musb_board_data musb_board_data = {
|
|
.interface_type = MUSB_INTERFACE_UTMI,
|
|
.mode = MUSB_OTG,
|
|
.power = 100,
|
|
};
|
|
|
|
static struct omap2_hsmmc_info mmc[] = {
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
|
.gpio_wp = -EINVAL,
|
|
.gpio_cd = -EINVAL,
|
|
},
|
|
{
|
|
.name = "wl1271",
|
|
.mmc = 5,
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
|
|
.gpio_wp = -EINVAL,
|
|
.gpio_cd = -EINVAL,
|
|
.ocr_mask = MMC_VDD_165_195,
|
|
.nonremovable = true,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
|
|
};
|
|
|
|
static struct regulator_init_data panda_vmmc5 = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
|
|
.consumer_supplies = omap4_panda_vmmc5_supply,
|
|
};
|
|
|
|
static struct fixed_voltage_config panda_vwlan = {
|
|
.supply_name = "vwl1271",
|
|
.microvolts = 1800000, /* 1.8V */
|
|
.gpio = GPIO_WIFI_PMENA,
|
|
.startup_delay = 70000, /* 70msec */
|
|
.enable_high = 1,
|
|
.enabled_at_boot = 0,
|
|
.init_data = &panda_vmmc5,
|
|
};
|
|
|
|
static struct platform_device omap_vwlan_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &panda_vwlan,
|
|
},
|
|
};
|
|
|
|
static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
|
|
.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
|
|
};
|
|
|
|
static struct twl6040_codec_data twl6040_codec = {
|
|
/* single-step ramp for headset and handsfree */
|
|
.hs_left_step = 0x0f,
|
|
.hs_right_step = 0x0f,
|
|
.hf_left_step = 0x1d,
|
|
.hf_right_step = 0x1d,
|
|
};
|
|
|
|
static struct twl6040_platform_data twl6040_data = {
|
|
.codec = &twl6040_codec,
|
|
.audpwron_gpio = 127,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata panda_i2c_1_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("twl6040", 0x4b),
|
|
.irq = 119 + OMAP44XX_IRQ_GIC_START,
|
|
.platform_data = &twl6040_data,
|
|
},
|
|
};
|
|
|
|
/* Panda board uses the common PMIC configuration */
|
|
static struct twl4030_platform_data omap4_panda_twldata;
|
|
|
|
/*
|
|
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
|
|
* is connected as I2C slave device, and can be accessed at address 0x50
|
|
*/
|
|
static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
|
|
{
|
|
I2C_BOARD_INFO("eeprom", 0x50),
|
|
},
|
|
};
|
|
|
|
static int __init omap4_panda_i2c_init(void)
|
|
{
|
|
omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
|
|
TWL_COMMON_REGULATOR_VDAC |
|
|
TWL_COMMON_REGULATOR_VAUX2 |
|
|
TWL_COMMON_REGULATOR_VAUX3 |
|
|
TWL_COMMON_REGULATOR_VMMC |
|
|
TWL_COMMON_REGULATOR_VPP |
|
|
TWL_COMMON_REGULATOR_VANA |
|
|
TWL_COMMON_REGULATOR_VCXIO |
|
|
TWL_COMMON_REGULATOR_VUSB |
|
|
TWL_COMMON_REGULATOR_CLK32KG |
|
|
TWL_COMMON_REGULATOR_V1V8 |
|
|
TWL_COMMON_REGULATOR_V2V1);
|
|
omap4_pmic_init("twl6030", &omap4_panda_twldata, panda_i2c_1_boardinfo,
|
|
ARRAY_SIZE(panda_i2c_1_boardinfo));
|
|
omap_register_i2c_bus(2, 400, NULL, 0);
|
|
/*
|
|
* Bus 3 is attached to the DVI port where devices like the pico DLP
|
|
* projector don't work reliably with 400kHz
|
|
*/
|
|
omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
|
|
ARRAY_SIZE(panda_i2c_eeprom));
|
|
omap_register_i2c_bus(4, 400, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
/* WLAN IRQ - GPIO 53 */
|
|
OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
|
|
/* WLAN POWER ENABLE - GPIO 43 */
|
|
OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
|
|
/* WLAN SDIO: MMC5 CMD */
|
|
OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
/* WLAN SDIO: MMC5 CLK */
|
|
OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
/* WLAN SDIO: MMC5 DAT[0-3] */
|
|
OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
/* gpio 0 - TFP410 PD */
|
|
OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
|
|
/* dispc2_data23 */
|
|
OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data22 */
|
|
OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data21 */
|
|
OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data20 */
|
|
OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data19 */
|
|
OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data18 */
|
|
OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data15 */
|
|
OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data14 */
|
|
OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data13 */
|
|
OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data12 */
|
|
OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data11 */
|
|
OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data10 */
|
|
OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data9 */
|
|
OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data16 */
|
|
OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data17 */
|
|
OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_hsync */
|
|
OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_pclk */
|
|
OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_vsync */
|
|
OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_de */
|
|
OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data8 */
|
|
OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data7 */
|
|
OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data6 */
|
|
OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data5 */
|
|
OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data4 */
|
|
OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data3 */
|
|
OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data2 */
|
|
OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data1 */
|
|
OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* dispc2_data0 */
|
|
OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
|
|
/* NIRQ2 for twl6040 */
|
|
OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
|
|
OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
|
|
/* GPIO_127 for twl6040 */
|
|
OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
|
|
/* McPDM */
|
|
OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
|
|
OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
|
|
OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
|
|
OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
|
|
/* McBSP1 */
|
|
OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
|
|
OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
|
|
OMAP_PULL_ENA),
|
|
OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
|
|
/* UART2 - BT/FM/GPS shared transport */
|
|
OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
|
|
OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
|
|
OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
|
|
#else
|
|
#define board_mux NULL
|
|
#endif
|
|
|
|
|
|
static void omap4_panda_init_rev(void)
|
|
{
|
|
if (cpu_is_omap443x()) {
|
|
/* PandaBoard 4430 */
|
|
/* ASoC audio configuration */
|
|
panda_abe_audio_data.card_name = "PandaBoard";
|
|
panda_abe_audio_data.has_hsmic = 1;
|
|
} else {
|
|
/* PandaBoard ES */
|
|
/* ASoC audio configuration */
|
|
panda_abe_audio_data.card_name = "PandaBoardES";
|
|
}
|
|
}
|
|
|
|
static void __init omap4_panda_init(void)
|
|
{
|
|
int package = OMAP_PACKAGE_CBS;
|
|
int ret;
|
|
|
|
if (omap_rev() == OMAP4430_REV_ES1_0)
|
|
package = OMAP_PACKAGE_CBL;
|
|
omap4_mux_init(board_mux, NULL, package);
|
|
|
|
omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
|
|
ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
|
|
if (ret)
|
|
pr_err("error setting wl12xx data: %d\n", ret);
|
|
|
|
omap4_panda_init_rev();
|
|
omap4_panda_i2c_init();
|
|
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
|
|
platform_device_register(&omap_vwlan_device);
|
|
omap_serial_init();
|
|
omap_sdrc_init(NULL, NULL);
|
|
omap4_twl6030_hsmmc_init(mmc);
|
|
omap4_ehci_init();
|
|
usb_musb_init(&musb_board_data);
|
|
omap4_panda_display_init();
|
|
}
|
|
|
|
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
|
|
/* Maintainer: David Anders - Texas Instruments Inc */
|
|
.atag_offset = 0x100,
|
|
.smp = smp_ops(omap4_smp_ops),
|
|
.reserve = omap_reserve,
|
|
.map_io = omap4_map_io,
|
|
.init_early = omap4430_init_early,
|
|
.init_irq = gic_init_irq,
|
|
.handle_irq = gic_handle_irq,
|
|
.init_machine = omap4_panda_init,
|
|
.init_late = omap4430_init_late,
|
|
.timer = &omap4_timer,
|
|
.restart = omap44xx_restart,
|
|
MACHINE_END
|