linux/drivers/bluetooth
João Paulo Rechi Vita df2445bf77 Bluetooth: Add a new 13d3:3496 QCA_ROME device
Without this patch we can't establish a SCO connection with this
adapter.

This adapter is named "IMC Networks" under lsusb.

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3496 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18 06:37:52 +02:00
..
Kconfig Bluetooth: hci_qca: Add serdev support 2018-05-18 06:37:51 +02:00
Makefile Bluetooth: Remove unused btuart_cs driver 2018-04-01 14:25:32 +02:00
ath3k.c Bluetooth: ath3k: fix checkpatch warning 2018-02-07 09:46:09 +01:00
bcm203x.c Bluetooth: mark expected switch fall-throughs 2017-10-14 09:25:51 +02:00
bfusb.c networking: introduce and use skb_put_data() 2017-06-16 11:48:37 -04:00
bluecard_cs.c Bluetooth: Fix a possible sleep-in-atomic bug in bluecard_write_wakeup 2017-12-13 14:38:59 +01:00
bpa10x.c Bluetooth: bpa10x: Use separate h4_recv_buf helper 2018-04-01 14:25:32 +02:00
bt3c_cs.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
btbcm.c Bluetooth: btbcm: btbcm_initialize(): Initialize hw_name to "BCM" 2018-05-18 06:37:51 +02:00
btbcm.h Bluetooth: btbcm: Allow using btbcm_initialize() for reinit 2018-05-18 06:37:51 +02:00
btintel.c Bluetooth: btintel: Create common function for firmware download 2018-01-25 09:28:40 +01:00
btintel.h Bluetooth: btintel: Create common function for firmware download 2018-01-25 09:28:40 +01:00
btmrvl_debugfs.c Bluetooth: btmrvl add firmware dump support 2014-12-03 17:35:51 +01:00
btmrvl_drv.h Bluetooth: btmrvl: drop duplicate header slab.h 2016-12-08 07:44:56 +01:00
btmrvl_main.c Bluetooth: btmrvl_main: Replace GFP_ATOMIC with GFP_KERNEL in btmrvl_send_sync_cmd 2018-02-07 09:48:56 +01:00
btmrvl_sdio.c Bluetooth: btmrvl: Delete an unnecessary variable initialisation in btmrvl_sdio_card_to_host() 2018-04-01 14:25:31 +02:00
btmrvl_sdio.h btmrvl: add platform specific wakeup interrupt support 2016-05-02 19:26:15 +02:00
btqca.c Bluetooth: btqca: Add AR3002 rampatch support 2018-05-18 06:37:52 +02:00
btqca.h Bluetooth: btqca: Add AR3002 rampatch support 2018-05-18 06:37:52 +02:00
btqcomsmd.c Bluetooth: btqcomsmd: Fix rx/tx stats 2018-05-18 06:37:50 +02:00
btrsi.c Bluetooth: btrsi: remove unused including <linux/version.h> 2018-04-01 21:43:02 +03:00
btrtl.c Bluetooth: btrtl: Add RTL8723D and RTL8821C devices 2018-02-11 21:50:35 +01:00
btrtl.h Bluetooth: btrtl: Create separate module for Realtek BT driver 2015-05-14 12:04:12 +02:00
btsdio.c Bluetooth: btsdio: Do not bind to non-removable BCM43341 2017-12-13 00:28:41 +01:00
btusb.c Bluetooth: Add a new 13d3:3496 QCA_ROME device 2018-05-18 06:37:52 +02:00
btwilink.c Bluetooth: Style fix - align block comments 2017-07-22 08:39:39 +02:00
dtl1_cs.c networking: add and use skb_put_u8() 2017-06-16 11:48:40 -04:00
h4_recv.h Bluetooth: bpa10x: Use separate h4_recv_buf helper 2018-04-01 14:25:32 +02:00
hci_ag6xx.c Bluetooth: hci_uart: Add diag and address support for Intel/AG6xx 2016-02-29 19:25:22 +02:00
hci_ath.c Bluetooth: hci_ath: Replace mdelay with msleep in ath_wakeup_ar3k 2018-02-07 09:47:04 +01:00
hci_bcm.c Bluetooth: btbcm: Allow using btbcm_initialize() for reinit 2018-05-18 06:37:51 +02:00
hci_bcsp.c Bluetooth: Convert timers to use timer_setup() 2017-10-06 20:37:11 +02:00
hci_h4.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
hci_h5.c Bluetooth: Convert timers to use timer_setup() 2017-10-06 20:37:11 +02:00
hci_intel.c Bluetooth: btintel: Create common function for firmware download 2018-01-25 09:28:40 +01:00
hci_ldisc.c Bluetooth: hci_ldisc: Provide a 'default' switch case 2018-05-18 06:37:52 +02:00
hci_ll.c Bluetooth: hci_ll: Convert to use h4_recv_buf helper 2018-04-01 14:25:32 +02:00
hci_mrvl.c networking: introduce and use skb_put_data() 2017-06-16 11:48:37 -04:00
hci_nokia.c Bluetooth: hci_nokia: Use new hci_uart_unregister_device() function 2017-07-20 11:18:36 +02:00
hci_qca.c Bluetooth: hci_qca: Add serdev support 2018-05-18 06:37:51 +02:00
hci_serdev.c Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops 2017-12-13 00:28:41 +01:00
hci_uart.h Bluetooth: hci_ldisc: Allow sleeping while proto locks are held. 2017-10-29 14:03:28 +01:00
hci_vhci.c vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00