mirror of https://gitee.com/openkylin/linux.git
159 lines
4.6 KiB
C
159 lines
4.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* Montage Technology M88DS3103/M88RS6000 demodulator driver
|
|
*
|
|
* Copyright (C) 2013 Antti Palosaari <crope@iki.fi>
|
|
*/
|
|
|
|
#ifndef M88DS3103_H
|
|
#define M88DS3103_H
|
|
|
|
#include <linux/dvb/frontend.h>
|
|
|
|
/*
|
|
* I2C address
|
|
* 0x68,
|
|
*/
|
|
|
|
/**
|
|
* enum m88ds3103_ts_mode - TS connection mode
|
|
* @M88DS3103_TS_SERIAL: TS output pin D0, normal
|
|
* @M88DS3103_TS_SERIAL_D7: TS output pin D7
|
|
* @M88DS3103_TS_PARALLEL: TS Parallel mode
|
|
* @M88DS3103_TS_CI: TS CI Mode
|
|
*/
|
|
enum m88ds3103_ts_mode {
|
|
M88DS3103_TS_SERIAL,
|
|
M88DS3103_TS_SERIAL_D7,
|
|
M88DS3103_TS_PARALLEL,
|
|
M88DS3103_TS_CI
|
|
};
|
|
|
|
/**
|
|
* enum m88ds3103_clock_out
|
|
* @M88DS3103_CLOCK_OUT_DISABLED: Clock output is disabled
|
|
* @M88DS3103_CLOCK_OUT_ENABLED: Clock output is enabled with crystal
|
|
* clock.
|
|
* @M88DS3103_CLOCK_OUT_ENABLED_DIV2: Clock output is enabled with half
|
|
* crystal clock.
|
|
*/
|
|
enum m88ds3103_clock_out {
|
|
M88DS3103_CLOCK_OUT_DISABLED,
|
|
M88DS3103_CLOCK_OUT_ENABLED,
|
|
M88DS3103_CLOCK_OUT_ENABLED_DIV2
|
|
};
|
|
|
|
/**
|
|
* struct m88ds3103_platform_data - Platform data for the m88ds3103 driver
|
|
* @clk: Clock frequency.
|
|
* @i2c_wr_max: Max bytes I2C adapter can write at once.
|
|
* @ts_mode: TS mode.
|
|
* @ts_clk: TS clock (KHz).
|
|
* @ts_clk_pol: TS clk polarity. 1-active at falling edge; 0-active at rising
|
|
* edge.
|
|
* @spec_inv: Input spectrum inversion.
|
|
* @agc: AGC configuration.
|
|
* @agc_inv: AGC polarity.
|
|
* @clk_out: Clock output.
|
|
* @envelope_mode: DiSEqC envelope mode.
|
|
* @lnb_hv_pol: LNB H/V pin polarity. 0: pin high set to VOLTAGE_18, pin low to
|
|
* set VOLTAGE_13. 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18.
|
|
* @lnb_en_pol: LNB enable pin polarity. 0: pin high to disable, pin low to
|
|
* enable. 1: pin high to enable, pin low to disable.
|
|
* @get_dvb_frontend: Get DVB frontend.
|
|
* @get_i2c_adapter: Get I2C adapter.
|
|
*/
|
|
struct m88ds3103_platform_data {
|
|
u32 clk;
|
|
u16 i2c_wr_max;
|
|
enum m88ds3103_ts_mode ts_mode;
|
|
u32 ts_clk;
|
|
enum m88ds3103_clock_out clk_out;
|
|
u8 ts_clk_pol:1;
|
|
u8 spec_inv:1;
|
|
u8 agc;
|
|
u8 agc_inv:1;
|
|
u8 envelope_mode:1;
|
|
u8 lnb_hv_pol:1;
|
|
u8 lnb_en_pol:1;
|
|
|
|
struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
|
|
struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *);
|
|
|
|
/* private: For legacy media attach wrapper. Do not set value. */
|
|
u8 attach_in_use:1;
|
|
};
|
|
|
|
/**
|
|
* struct m88ds3103_config - m88ds3102 configuration
|
|
*
|
|
* @i2c_addr: I2C address. Default: none, must set. Example: 0x68, ...
|
|
* @clock: Device's clock. Default: none, must set. Example: 27000000
|
|
* @i2c_wr_max: Max bytes I2C provider is asked to write at once.
|
|
* Default: none, must set. Example: 33, 65, ...
|
|
* @ts_mode: TS output mode, as defined by &enum m88ds3103_ts_mode.
|
|
* Default: M88DS3103_TS_SERIAL.
|
|
* @ts_clk: TS clk in KHz. Default: 0.
|
|
* @ts_clk_pol: TS clk polarity.Default: 0.
|
|
* 1-active at falling edge; 0-active at rising edge.
|
|
* @spec_inv: Spectrum inversion. Default: 0.
|
|
* @agc_inv: AGC polarity. Default: 0.
|
|
* @clock_out: Clock output, as defined by &enum m88ds3103_clock_out.
|
|
* Default: M88DS3103_CLOCK_OUT_DISABLED.
|
|
* @envelope_mode: DiSEqC envelope mode. Default: 0.
|
|
* @agc: AGC configuration. Default: none, must set.
|
|
* @lnb_hv_pol: LNB H/V pin polarity. Default: 0. Values:
|
|
* 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18;
|
|
* 0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13.
|
|
* @lnb_en_pol: LNB enable pin polarity. Default: 0. Values:
|
|
* 1: pin high to enable, pin low to disable;
|
|
* 0: pin high to disable, pin low to enable.
|
|
*/
|
|
struct m88ds3103_config {
|
|
u8 i2c_addr;
|
|
u32 clock;
|
|
u16 i2c_wr_max;
|
|
u8 ts_mode;
|
|
u32 ts_clk;
|
|
u8 ts_clk_pol:1;
|
|
u8 spec_inv:1;
|
|
u8 agc_inv:1;
|
|
u8 clock_out;
|
|
u8 envelope_mode:1;
|
|
u8 agc;
|
|
u8 lnb_hv_pol:1;
|
|
u8 lnb_en_pol:1;
|
|
};
|
|
|
|
#if defined(CONFIG_DVB_M88DS3103) || \
|
|
(defined(CONFIG_DVB_M88DS3103_MODULE) && defined(MODULE))
|
|
/**
|
|
* Attach a m88ds3103 demod
|
|
*
|
|
* @config: pointer to &struct m88ds3103_config with demod configuration.
|
|
* @i2c: i2c adapter to use.
|
|
* @tuner_i2c: on success, returns the I2C adapter associated with
|
|
* m88ds3103 tuner.
|
|
*
|
|
* return: FE pointer on success, NULL on failure.
|
|
* Note: Do not add new m88ds3103_attach() users! Use I2C bindings instead.
|
|
*/
|
|
extern struct dvb_frontend *m88ds3103_attach(
|
|
const struct m88ds3103_config *config,
|
|
struct i2c_adapter *i2c,
|
|
struct i2c_adapter **tuner_i2c);
|
|
extern int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm);
|
|
#else
|
|
static inline struct dvb_frontend *m88ds3103_attach(
|
|
const struct m88ds3103_config *config,
|
|
struct i2c_adapter *i2c,
|
|
struct i2c_adapter **tuner_i2c)
|
|
{
|
|
pr_warn("%s: driver disabled by Kconfig\n", __func__);
|
|
return NULL;
|
|
}
|
|
#define m88ds3103_get_agc_pwm NULL
|
|
#endif
|
|
|
|
#endif
|