openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/include/asm-ia64/mca_asm.h

313 lines
9.1 KiB
C
Raw Blame History

/*
* File: mca_asm.h
*
* Copyright (C) 1999 Silicon Graphics, Inc.
* Copyright (C) Vijay Chander (vijay@engr.sgi.com)
* Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
* Copyright (C) 2000 Hewlett-Packard Co.
* Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 2002 Intel Corp.
* Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
*/
#ifndef _ASM_IA64_MCA_ASM_H
#define _ASM_IA64_MCA_ASM_H
#define PSR_IC 13
#define PSR_I 14
#define PSR_DT 17
#define PSR_RT 27
#define PSR_MC 35
#define PSR_IT 36
#define PSR_BN 44
/*
* This macro converts a instruction virtual address to a physical address
* Right now for simulation purposes the virtual addresses are
* direct mapped to physical addresses.
* 1. Lop off bits 61 thru 63 in the virtual address
*/
#define INST_VA_TO_PA(addr) \
dep addr = 0, addr, 61, 3
/*
* This macro converts a data virtual address to a physical address
* Right now for simulation purposes the virtual addresses are
* direct mapped to physical addresses.
* 1. Lop off bits 61 thru 63 in the virtual address
*/
#define DATA_VA_TO_PA(addr) \
tpa addr = addr
/*
* This macro converts a data physical address to a virtual address
* Right now for simulation purposes the virtual addresses are
* direct mapped to physical addresses.
* 1. Put 0x7 in bits 61 thru 63.
*/
#define DATA_PA_TO_VA(addr,temp) \
mov temp = 0x7 ;; \
dep addr = temp, addr, 61, 3
#define GET_THIS_PADDR(reg, var) \
mov reg = IA64_KR(PER_CPU_DATA);; \
addl reg = THIS_CPU(var), reg
/*
* This macro jumps to the instruction at the given virtual address
* and starts execution in physical mode with all the address
* translations turned off.
* 1. Save the current psr
* 2. Make sure that all the upper 32 bits are off
*
* 3. Clear the interrupt enable and interrupt state collection bits
* in the psr before updating the ipsr and iip.
*
* 4. Turn off the instruction, data and rse translation bits of the psr
* and store the new value into ipsr
* Also make sure that the interrupts are disabled.
* Ensure that we are in little endian mode.
* [psr.{rt, it, dt, i, be} = 0]
*
* 5. Get the physical address corresponding to the virtual address
* of the next instruction bundle and put it in iip.
* (Using magic numbers 24 and 40 in the deposint instruction since
* the IA64_SDK code directly maps to lower 24bits as physical address
* from a virtual address).
*
* 6. Do an rfi to move the values from ipsr to psr and iip to ip.
*/
#define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
mov old_psr = psr; \
;; \
dep old_psr = 0, old_psr, 32, 32; \
\
mov ar.rsc = 0 ; \
;; \
srlz.d; \
mov temp2 = ar.bspstore; \
;; \
DATA_VA_TO_PA(temp2); \
;; \
mov temp1 = ar.rnat; \
;; \
mov ar.bspstore = temp2; \
;; \
mov ar.rnat = temp1; \
mov temp1 = psr; \
mov temp2 = psr; \
;; \
\
dep temp2 = 0, temp2, PSR_IC, 2; \
;; \
mov psr.l = temp2; \
;; \
srlz.d; \
dep temp1 = 0, temp1, 32, 32; \
;; \
dep temp1 = 0, temp1, PSR_IT, 1; \
;; \
dep temp1 = 0, temp1, PSR_DT, 1; \
;; \
dep temp1 = 0, temp1, PSR_RT, 1; \
;; \
dep temp1 = 0, temp1, PSR_I, 1; \
;; \
dep temp1 = 0, temp1, PSR_IC, 1; \
;; \
dep temp1 = -1, temp1, PSR_MC, 1; \
;; \
mov cr.ipsr = temp1; \
;; \
LOAD_PHYSICAL(p0, temp2, start_addr); \
;; \
mov cr.iip = temp2; \
mov cr.ifs = r0; \
DATA_VA_TO_PA(sp); \
DATA_VA_TO_PA(gp); \
;; \
srlz.i; \
;; \
nop 1; \
nop 2; \
nop 1; \
nop 2; \
rfi; \
;;
/*
* This macro jumps to the instruction at the given virtual address
* and starts execution in virtual mode with all the address
* translations turned on.
* 1. Get the old saved psr
*
* 2. Clear the interrupt state collection bit in the current psr.
*
* 3. Set the instruction translation bit back in the old psr
* Note we have to do this since we are right now saving only the
* lower 32-bits of old psr.(Also the old psr has the data and
* rse translation bits on)
*
* 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1.
*
* 5. Reset the current thread pointer (r13).
*
* 6. Set iip to the virtual address of the next instruction bundle.
*
* 7. Do an rfi to move ipsr to psr and iip to ip.
*/
#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
mov temp2 = psr; \
;; \
mov old_psr = temp2; \
;; \
dep temp2 = 0, temp2, PSR_IC, 2; \
;; \
mov psr.l = temp2; \
mov ar.rsc = 0; \
;; \
srlz.d; \
mov r13 = ar.k6; \
mov temp2 = ar.bspstore; \
;; \
DATA_PA_TO_VA(temp2,temp1); \
;; \
mov temp1 = ar.rnat; \
;; \
mov ar.bspstore = temp2; \
;; \
mov ar.rnat = temp1; \
;; \
mov temp1 = old_psr; \
;; \
mov temp2 = 1; \
;; \
dep temp1 = temp2, temp1, PSR_IC, 1; \
;; \
dep temp1 = temp2, temp1, PSR_IT, 1; \
;; \
dep temp1 = temp2, temp1, PSR_DT, 1; \
;; \
dep temp1 = temp2, temp1, PSR_RT, 1; \
;; \
dep temp1 = temp2, temp1, PSR_BN, 1; \
;; \
\
mov cr.ipsr = temp1; \
movl temp2 = start_addr; \
;; \
mov cr.iip = temp2; \
;; \
DATA_PA_TO_VA(sp, temp1); \
DATA_PA_TO_VA(gp, temp2); \
srlz.i; \
;; \
nop 1; \
nop 2; \
nop 1; \
rfi \
;;
/*
* The following offsets capture the order in which the
* RSE related registers from the old context are
* saved onto the new stack frame.
*
* +-----------------------+
* |NDIRTY [BSP - BSPSTORE]|
* +-----------------------+
* | RNAT |
* +-----------------------+
* | BSPSTORE |
* +-----------------------+
* | IFS |
* +-----------------------+
* | PFS |
* +-----------------------+
* | RSC |
* +-----------------------+ <-------- Bottom of new stack frame
*/
#define rse_rsc_offset 0
#define rse_pfs_offset (rse_rsc_offset+0x08)
#define rse_ifs_offset (rse_pfs_offset+0x08)
#define rse_bspstore_offset (rse_ifs_offset+0x08)
#define rse_rnat_offset (rse_bspstore_offset+0x08)
#define rse_ndirty_offset (rse_rnat_offset+0x08)
/*
* rse_switch_context
*
* 1. Save old RSC onto the new stack frame
* 2. Save PFS onto new stack frame
* 3. Cover the old frame and start a new frame.
* 4. Save IFS onto new stack frame
* 5. Save the old BSPSTORE on the new stack frame
* 6. Save the old RNAT on the new stack frame
* 7. Write BSPSTORE with the new backing store pointer
* 8. Read and save the new BSP to calculate the #dirty registers
* NOTE: Look at pages 11-10, 11-11 in PRM Vol 2
*/
#define rse_switch_context(temp,p_stackframe,p_bspstore) \
;; \
mov temp=ar.rsc;; \
st8 [p_stackframe]=temp,8;; \
mov temp=ar.pfs;; \
st8 [p_stackframe]=temp,8; \
cover ;; \
mov temp=cr.ifs;; \
st8 [p_stackframe]=temp,8;; \
mov temp=ar.bspstore;; \
st8 [p_stackframe]=temp,8;; \
mov temp=ar.rnat;; \
st8 [p_stackframe]=temp,8; \
mov ar.bspstore=p_bspstore;; \
mov temp=ar.bsp;; \
sub temp=temp,p_bspstore;; \
st8 [p_stackframe]=temp,8;;
/*
* rse_return_context
* 1. Allocate a zero-sized frame
* 2. Store the number of dirty registers RSC.loadrs field
* 3. Issue a loadrs to insure that any registers from the interrupted
* context which were saved on the new stack frame have been loaded
* back into the stacked registers
* 4. Restore BSPSTORE
* 5. Restore RNAT
* 6. Restore PFS
* 7. Restore IFS
* 8. Restore RSC
* 9. Issue an RFI
*/
#define rse_return_context(psr_mask_reg,temp,p_stackframe) \
;; \
alloc temp=ar.pfs,0,0,0,0; \
add p_stackframe=rse_ndirty_offset,p_stackframe;; \
ld8 temp=[p_stackframe];; \
shl temp=temp,16;; \
mov ar.rsc=temp;; \
loadrs;; \
add p_stackframe=-rse_ndirty_offset+rse_bspstore_offset,p_stackframe;;\
ld8 temp=[p_stackframe];; \
mov ar.bspstore=temp;; \
add p_stackframe=-rse_bspstore_offset+rse_rnat_offset,p_stackframe;;\
ld8 temp=[p_stackframe];; \
mov ar.rnat=temp;; \
add p_stackframe=-rse_rnat_offset+rse_pfs_offset,p_stackframe;; \
ld8 temp=[p_stackframe];; \
mov ar.pfs=temp;; \
add p_stackframe=-rse_pfs_offset+rse_ifs_offset,p_stackframe;; \
ld8 temp=[p_stackframe];; \
mov cr.ifs=temp;; \
add p_stackframe=-rse_ifs_offset+rse_rsc_offset,p_stackframe;; \
ld8 temp=[p_stackframe];; \
mov ar.rsc=temp ; \
mov temp=psr;; \
or temp=temp,psr_mask_reg;; \
mov cr.ipsr=temp;; \
mov temp=ip;; \
add temp=0x30,temp;; \
mov cr.iip=temp;; \
srlz.i;; \
rfi;;
#endif /* _ASM_IA64_MCA_ASM_H */
Reference in New Issue View Git Blame Copy Permalink