mirror of https://gitee.com/openkylin/linux.git
854 lines
27 KiB
C
854 lines
27 KiB
C
/*
|
|
* Auvitek AU8522 QAM/8VSB demodulator driver and video decoder
|
|
*
|
|
* Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org>
|
|
* Copyright (C) 2005-2008 Auvitek International, Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* As published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
|
|
/* Developer notes:
|
|
*
|
|
* VBI support is not yet working
|
|
* Enough is implemented here for CVBS and S-Video inputs, but the actual
|
|
* analog demodulator code isn't implemented (not needed for xc5000 since it
|
|
* has its own demodulator and outputs CVBS)
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
#include <media/v4l2-device.h>
|
|
#include "au8522.h"
|
|
#include "au8522_priv.h"
|
|
|
|
MODULE_AUTHOR("Devin Heitmueller");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int au8522_analog_debug;
|
|
|
|
|
|
module_param_named(analog_debug, au8522_analog_debug, int, 0644);
|
|
|
|
MODULE_PARM_DESC(analog_debug,
|
|
"Analog debugging messages [0=Off (default) 1=On]");
|
|
|
|
struct au8522_register_config {
|
|
u16 reg_name;
|
|
u8 reg_val[8];
|
|
};
|
|
|
|
|
|
/* Video Decoder Filter Coefficients
|
|
The values are as follows from left to right
|
|
0="ATV RF" 1="ATV RF13" 2="CVBS" 3="S-Video" 4="PAL" 5=CVBS13" 6="SVideo13"
|
|
*/
|
|
static const struct au8522_register_config filter_coef[] = {
|
|
{AU8522_FILTER_COEF_R410, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R411, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R412, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R413, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R414, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R415, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R416, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R417, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R418, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00} },
|
|
{AU8522_FILTER_COEF_R419, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40} },
|
|
{AU8522_FILTER_COEF_R41A, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09} },
|
|
{AU8522_FILTER_COEF_R41B, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38} },
|
|
{AU8522_FILTER_COEF_R41C, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff} },
|
|
{AU8522_FILTER_COEF_R41D, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7} },
|
|
{AU8522_FILTER_COEF_R41E, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf} },
|
|
{AU8522_FILTER_COEF_R41F, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06} },
|
|
{AU8522_FILTER_COEF_R420, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30} },
|
|
{AU8522_FILTER_COEF_R421, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01} },
|
|
{AU8522_FILTER_COEF_R422, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd} },
|
|
{AU8522_FILTER_COEF_R423, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf} },
|
|
{AU8522_FILTER_COEF_R424, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7} },
|
|
{AU8522_FILTER_COEF_R425, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb} },
|
|
{AU8522_FILTER_COEF_R426, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0} },
|
|
{AU8522_FILTER_COEF_R427, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f} },
|
|
{AU8522_FILTER_COEF_R428, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8} },
|
|
{AU8522_FILTER_COEF_R429, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb} },
|
|
{AU8522_FILTER_COEF_R42A, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5} },
|
|
{AU8522_FILTER_COEF_R42B, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e} },
|
|
{AU8522_FILTER_COEF_R42C, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15} },
|
|
{AU8522_FILTER_COEF_R42D, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34} },
|
|
|
|
};
|
|
#define NUM_FILTER_COEF (sizeof(filter_coef)\
|
|
/ sizeof(struct au8522_register_config))
|
|
|
|
|
|
/* Registers 0x060b through 0x0652 are the LP Filter coefficients
|
|
The values are as follows from left to right
|
|
0="SIF" 1="ATVRF/ATVRF13"
|
|
Note: the "ATVRF/ATVRF13" mode has never been tested
|
|
*/
|
|
static const struct au8522_register_config lpfilter_coef[] = {
|
|
{0x060b, {0x21, 0x0b} },
|
|
{0x060c, {0xad, 0xad} },
|
|
{0x060d, {0x70, 0xf0} },
|
|
{0x060e, {0xea, 0xe9} },
|
|
{0x060f, {0xdd, 0xdd} },
|
|
{0x0610, {0x08, 0x64} },
|
|
{0x0611, {0x60, 0x60} },
|
|
{0x0612, {0xf8, 0xb2} },
|
|
{0x0613, {0x01, 0x02} },
|
|
{0x0614, {0xe4, 0xb4} },
|
|
{0x0615, {0x19, 0x02} },
|
|
{0x0616, {0xae, 0x2e} },
|
|
{0x0617, {0xee, 0xc5} },
|
|
{0x0618, {0x56, 0x56} },
|
|
{0x0619, {0x30, 0x58} },
|
|
{0x061a, {0xf9, 0xf8} },
|
|
{0x061b, {0x24, 0x64} },
|
|
{0x061c, {0x07, 0x07} },
|
|
{0x061d, {0x30, 0x30} },
|
|
{0x061e, {0xa9, 0xed} },
|
|
{0x061f, {0x09, 0x0b} },
|
|
{0x0620, {0x42, 0xc2} },
|
|
{0x0621, {0x1d, 0x2a} },
|
|
{0x0622, {0xd6, 0x56} },
|
|
{0x0623, {0x95, 0x8b} },
|
|
{0x0624, {0x2b, 0x2b} },
|
|
{0x0625, {0x30, 0x24} },
|
|
{0x0626, {0x3e, 0x3e} },
|
|
{0x0627, {0x62, 0xe2} },
|
|
{0x0628, {0xe9, 0xf5} },
|
|
{0x0629, {0x99, 0x19} },
|
|
{0x062a, {0xd4, 0x11} },
|
|
{0x062b, {0x03, 0x04} },
|
|
{0x062c, {0xb5, 0x85} },
|
|
{0x062d, {0x1e, 0x20} },
|
|
{0x062e, {0x2a, 0xea} },
|
|
{0x062f, {0xd7, 0xd2} },
|
|
{0x0630, {0x15, 0x15} },
|
|
{0x0631, {0xa3, 0xa9} },
|
|
{0x0632, {0x1f, 0x1f} },
|
|
{0x0633, {0xf9, 0xd1} },
|
|
{0x0634, {0xc0, 0xc3} },
|
|
{0x0635, {0x4d, 0x8d} },
|
|
{0x0636, {0x21, 0x31} },
|
|
{0x0637, {0x83, 0x83} },
|
|
{0x0638, {0x08, 0x8c} },
|
|
{0x0639, {0x19, 0x19} },
|
|
{0x063a, {0x45, 0xa5} },
|
|
{0x063b, {0xef, 0xec} },
|
|
{0x063c, {0x8a, 0x8a} },
|
|
{0x063d, {0xf4, 0xf6} },
|
|
{0x063e, {0x8f, 0x8f} },
|
|
{0x063f, {0x44, 0x0c} },
|
|
{0x0640, {0xef, 0xf0} },
|
|
{0x0641, {0x66, 0x66} },
|
|
{0x0642, {0xcc, 0xd2} },
|
|
{0x0643, {0x41, 0x41} },
|
|
{0x0644, {0x63, 0x93} },
|
|
{0x0645, {0x8e, 0x8e} },
|
|
{0x0646, {0xa2, 0x42} },
|
|
{0x0647, {0x7b, 0x7b} },
|
|
{0x0648, {0x04, 0x04} },
|
|
{0x0649, {0x00, 0x00} },
|
|
{0x064a, {0x40, 0x40} },
|
|
{0x064b, {0x8c, 0x98} },
|
|
{0x064c, {0x00, 0x00} },
|
|
{0x064d, {0x63, 0xc3} },
|
|
{0x064e, {0x04, 0x04} },
|
|
{0x064f, {0x20, 0x20} },
|
|
{0x0650, {0x00, 0x00} },
|
|
{0x0651, {0x40, 0x40} },
|
|
{0x0652, {0x01, 0x01} },
|
|
};
|
|
#define NUM_LPFILTER_COEF (sizeof(lpfilter_coef)\
|
|
/ sizeof(struct au8522_register_config))
|
|
|
|
static inline struct au8522_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct au8522_state, sd);
|
|
}
|
|
|
|
static void setup_vbi(struct au8522_state *state, int aud_input)
|
|
{
|
|
int i;
|
|
|
|
/* These are set to zero regardless of what mode we're in */
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_L_REG018H, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_TOTAL_BITS_REG019H, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_H_REG01AH, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_L_REG01BH, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_THRESH1_REG01CH, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT2_REG01EH, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT1_REG01FH, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT0_REG020H, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK2_REG021H,
|
|
0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK1_REG022H,
|
|
0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK0_REG023H,
|
|
0x00);
|
|
|
|
/* Setup the VBI registers */
|
|
for (i = 0x30; i < 0x60; i++)
|
|
au8522_writereg(state, i, 0x40);
|
|
|
|
/* For some reason, every register is 0x40 except register 0x44
|
|
(confirmed via the HVR-950q USB capture) */
|
|
au8522_writereg(state, 0x44, 0x60);
|
|
|
|
/* Enable VBI (we always do this regardless of whether the user is
|
|
viewing closed caption info) */
|
|
au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H,
|
|
AU8522_TVDEC_VBI_CTRL_H_REG017H_CCON);
|
|
|
|
}
|
|
|
|
static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode)
|
|
{
|
|
int i;
|
|
int filter_coef_type;
|
|
|
|
/* Provide reasonable defaults for picture tuning values */
|
|
au8522_writereg(state, AU8522_TVDEC_SHARPNESSREG009H, 0x07);
|
|
au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, 0xed);
|
|
state->brightness = 0xed - 128;
|
|
au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, 0x79);
|
|
state->contrast = 0x79;
|
|
au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80);
|
|
au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80);
|
|
state->saturation = 0x80;
|
|
au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00);
|
|
au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00);
|
|
state->hue = 0x00;
|
|
|
|
/* Other decoder registers */
|
|
au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00);
|
|
|
|
if (input_mode == 0x23) {
|
|
/* S-Video input mapping */
|
|
au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x04);
|
|
} else {
|
|
/* All other modes (CVBS/ATVRF etc.) */
|
|
au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x00);
|
|
}
|
|
|
|
au8522_writereg(state, AU8522_TVDEC_PGA_REG012H,
|
|
AU8522_TVDEC_PGA_REG012H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_MODE_REG015H,
|
|
AU8522_TVDEC_COMB_MODE_REG015H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDED_DBG_MODE_REG060H,
|
|
AU8522_TVDED_DBG_MODE_REG060H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H,
|
|
AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS13);
|
|
au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H,
|
|
AU8522_TVDEC_FORMAT_CTRL2_REG062H_CVBS13);
|
|
au8522_writereg(state, AU8522_TVDEC_VCR_DET_LLIM_REG063H,
|
|
AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_VCR_DET_HLIM_REG064H,
|
|
AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR1_REG065H,
|
|
AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR2_REG066H,
|
|
AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR3_REG067H,
|
|
AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_NOTCH_THR_REG068H,
|
|
AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR1_REG069H,
|
|
AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR2_REG06AH,
|
|
AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH,
|
|
AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS);
|
|
if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
|
|
input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO);
|
|
} else {
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS);
|
|
}
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH,
|
|
AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_UV_SEP_THR_REG06FH,
|
|
AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H,
|
|
AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS);
|
|
au8522_writereg(state, AU8522_REG071H, AU8522_REG071H_CVBS);
|
|
au8522_writereg(state, AU8522_REG072H, AU8522_REG072H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H,
|
|
AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS);
|
|
au8522_writereg(state, AU8522_REG074H, AU8522_REG074H_CVBS);
|
|
au8522_writereg(state, AU8522_REG075H, AU8522_REG075H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_DCAGC_CTRL_REG077H,
|
|
AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_PIC_START_ADJ_REG078H,
|
|
AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H,
|
|
AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH,
|
|
AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_INTRP_CTRL_REG07BH,
|
|
AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS);
|
|
au8522_writereg(state, AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H,
|
|
AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS);
|
|
au8522_writereg(state, AU8522_TOREGAAGC_REG0E5H,
|
|
AU8522_TOREGAAGC_REG0E5H_CVBS);
|
|
au8522_writereg(state, AU8522_REG016H, AU8522_REG016H_CVBS);
|
|
|
|
setup_vbi(state, 0);
|
|
|
|
if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
|
|
input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
|
|
/* Despite what the table says, for the HVR-950q we still need
|
|
to be in CVBS mode for the S-Video input (reason unknown). */
|
|
/* filter_coef_type = 3; */
|
|
filter_coef_type = 5;
|
|
} else {
|
|
filter_coef_type = 5;
|
|
}
|
|
|
|
/* Load the Video Decoder Filter Coefficients */
|
|
for (i = 0; i < NUM_FILTER_COEF; i++) {
|
|
au8522_writereg(state, filter_coef[i].reg_name,
|
|
filter_coef[i].reg_val[filter_coef_type]);
|
|
}
|
|
|
|
/* It's not clear what these registers are for, but they are always
|
|
set to the same value regardless of what mode we're in */
|
|
au8522_writereg(state, AU8522_REG42EH, 0x87);
|
|
au8522_writereg(state, AU8522_REG42FH, 0xa2);
|
|
au8522_writereg(state, AU8522_REG430H, 0xbf);
|
|
au8522_writereg(state, AU8522_REG431H, 0xcb);
|
|
au8522_writereg(state, AU8522_REG432H, 0xa1);
|
|
au8522_writereg(state, AU8522_REG433H, 0x41);
|
|
au8522_writereg(state, AU8522_REG434H, 0x88);
|
|
au8522_writereg(state, AU8522_REG435H, 0xc2);
|
|
au8522_writereg(state, AU8522_REG436H, 0x3c);
|
|
}
|
|
|
|
static void au8522_setup_cvbs_mode(struct au8522_state *state)
|
|
{
|
|
/* here we're going to try the pre-programmed route */
|
|
au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
|
|
AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
|
|
|
|
/* PGA in automatic mode */
|
|
au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
|
|
|
|
/* Enable clamping control */
|
|
au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
|
|
|
|
au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
|
|
AU8522_INPUT_CONTROL_REG081H_CVBS_CH1);
|
|
|
|
setup_decoder_defaults(state, AU8522_INPUT_CONTROL_REG081H_CVBS_CH1);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
|
|
}
|
|
|
|
static void au8522_setup_cvbs_tuner_mode(struct au8522_state *state)
|
|
{
|
|
/* here we're going to try the pre-programmed route */
|
|
au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
|
|
AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
|
|
|
|
/* It's not clear why we have to have the PGA in automatic mode while
|
|
enabling clamp control, but it's what Windows does */
|
|
au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
|
|
|
|
/* Enable clamping control */
|
|
au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e);
|
|
|
|
/* Disable automatic PGA (since the CVBS is coming from the tuner) */
|
|
au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10);
|
|
|
|
/* Set input mode to CVBS on channel 4 with SIF audio input enabled */
|
|
au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
|
|
AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF);
|
|
|
|
setup_decoder_defaults(state,
|
|
AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
|
|
}
|
|
|
|
static void au8522_setup_svideo_mode(struct au8522_state *state)
|
|
{
|
|
au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
|
|
AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO);
|
|
|
|
/* Set input to Y on Channe1, C on Channel 3 */
|
|
au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
|
|
AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13);
|
|
|
|
/* PGA in automatic mode */
|
|
au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
|
|
|
|
/* Enable clamping control */
|
|
au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
|
|
|
|
setup_decoder_defaults(state,
|
|
AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static void disable_audio_input(struct au8522_state *state)
|
|
{
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x04);
|
|
au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0x02);
|
|
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO);
|
|
}
|
|
|
|
/* 0=disable, 1=SIF */
|
|
static void set_audio_input(struct au8522_state *state, int aud_input)
|
|
{
|
|
int i;
|
|
|
|
/* Note that this function needs to be used in conjunction with setting
|
|
the input routing via register 0x81 */
|
|
|
|
if (aud_input == AU8522_AUDIO_NONE) {
|
|
disable_audio_input(state);
|
|
return;
|
|
}
|
|
|
|
if (aud_input != AU8522_AUDIO_SIF) {
|
|
/* The caller asked for a mode we don't currently support */
|
|
printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n",
|
|
aud_input);
|
|
return;
|
|
}
|
|
|
|
/* Load the Audio Decoder Filter Coefficients */
|
|
for (i = 0; i < NUM_LPFILTER_COEF; i++) {
|
|
au8522_writereg(state, lpfilter_coef[i].reg_name,
|
|
lpfilter_coef[i].reg_val[0]);
|
|
}
|
|
|
|
/* Setup audio */
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00);
|
|
au8522_writereg(state, AU8522_I2C_CONTROL_REG1_REG091H, 0x80);
|
|
au8522_writereg(state, AU8522_I2C_CONTROL_REG0_REG090H, 0x84);
|
|
msleep(150);
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x00);
|
|
msleep(1);
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x9d);
|
|
msleep(50);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0xff);
|
|
msleep(80);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F);
|
|
au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F);
|
|
au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO);
|
|
au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x82);
|
|
msleep(70);
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09);
|
|
au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03);
|
|
au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0xc2);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static int au8522_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
state->brightness = ctrl->value;
|
|
au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH,
|
|
ctrl->value - 128);
|
|
break;
|
|
case V4L2_CID_CONTRAST:
|
|
state->contrast = ctrl->value;
|
|
au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH,
|
|
ctrl->value);
|
|
break;
|
|
case V4L2_CID_SATURATION:
|
|
state->saturation = ctrl->value;
|
|
au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH,
|
|
ctrl->value);
|
|
au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH,
|
|
ctrl->value);
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
state->hue = ctrl->value;
|
|
au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH,
|
|
ctrl->value >> 8);
|
|
au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH,
|
|
ctrl->value & 0xFF);
|
|
break;
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
case V4L2_CID_AUDIO_BASS:
|
|
case V4L2_CID_AUDIO_TREBLE:
|
|
case V4L2_CID_AUDIO_BALANCE:
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
/* Not yet implemented */
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
/* Note that we are using values cached in the state structure instead
|
|
of reading the registers due to issues with i2c reads not working
|
|
properly/consistently yet on the HVR-950q */
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
ctrl->value = state->brightness;
|
|
break;
|
|
case V4L2_CID_CONTRAST:
|
|
ctrl->value = state->contrast;
|
|
break;
|
|
case V4L2_CID_SATURATION:
|
|
ctrl->value = state->saturation;
|
|
break;
|
|
case V4L2_CID_HUE:
|
|
ctrl->value = state->hue;
|
|
break;
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
case V4L2_CID_AUDIO_BASS:
|
|
case V4L2_CID_AUDIO_TREBLE:
|
|
case V4L2_CID_AUDIO_BALANCE:
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
/* Not yet supported */
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int au8522_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
if (!v4l2_chip_match_i2c_client(client, ®->match))
|
|
return -EINVAL;
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
reg->val = au8522_readreg(state, reg->reg & 0xffff);
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_s_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
if (!v4l2_chip_match_i2c_client(client, ®->match))
|
|
return -EINVAL;
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
au8522_writereg(state, reg->reg, reg->val & 0xff);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int au8522_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
if (enable) {
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
0x01);
|
|
msleep(1);
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
|
|
} else {
|
|
/* This does not completely power down the device
|
|
(it only reduces it from around 140ma to 80ma) */
|
|
au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
|
|
1 << 5);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
|
|
{
|
|
switch (qc->id) {
|
|
case V4L2_CID_CONTRAST:
|
|
return v4l2_ctrl_query_fill(qc, 0, 255, 1,
|
|
AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
|
|
case V4L2_CID_BRIGHTNESS:
|
|
return v4l2_ctrl_query_fill(qc, 0, 255, 1, 109);
|
|
case V4L2_CID_SATURATION:
|
|
return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
|
|
case V4L2_CID_HUE:
|
|
return v4l2_ctrl_query_fill(qc, -32768, 32768, 1, 0);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
qc->type = 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int au8522_reset(struct v4l2_subdev *sd, u32 val)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
state->operational_mode = AU8522_ANALOG_MODE;
|
|
|
|
/* Clear out any state associated with the digital side of the
|
|
chip, so that when it gets powered back up it won't think
|
|
that it is already tuned */
|
|
state->current_frequency = 0;
|
|
|
|
au8522_writereg(state, 0xa4, 1 << 5);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_s_video_routing(struct v4l2_subdev *sd,
|
|
u32 input, u32 output, u32 config)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
|
|
au8522_reset(sd, 0);
|
|
|
|
/* Jam open the i2c gate to the tuner. We do this here to handle the
|
|
case where the user went into digital mode (causing the gate to be
|
|
closed), and then came back to analog mode */
|
|
au8522_writereg(state, 0x106, 1);
|
|
|
|
if (input == AU8522_COMPOSITE_CH1) {
|
|
au8522_setup_cvbs_mode(state);
|
|
} else if (input == AU8522_SVIDEO_CH13) {
|
|
au8522_setup_svideo_mode(state);
|
|
} else if (input == AU8522_COMPOSITE_CH4_SIF) {
|
|
au8522_setup_cvbs_tuner_mode(state);
|
|
} else {
|
|
printk(KERN_ERR "au8522 mode not currently supported\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_s_audio_routing(struct v4l2_subdev *sd,
|
|
u32 input, u32 output, u32 config)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
set_audio_input(state, input);
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
|
|
{
|
|
int val = 0;
|
|
struct au8522_state *state = to_state(sd);
|
|
u8 lock_status;
|
|
|
|
/* Interrogate the decoder to see if we are getting a real signal */
|
|
lock_status = au8522_readreg(state, 0x00);
|
|
if (lock_status == 0xa2)
|
|
vt->signal = 0x01;
|
|
else
|
|
vt->signal = 0x00;
|
|
|
|
vt->capability |=
|
|
V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
|
|
V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
|
|
|
|
val = V4L2_TUNER_SUB_MONO;
|
|
vt->rxsubchans = val;
|
|
vt->audmode = V4L2_TUNER_MODE_STEREO;
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_g_chip_ident(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_chip_ident *chip)
|
|
{
|
|
struct au8522_state *state = to_state(sd);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev);
|
|
}
|
|
|
|
static int au8522_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
/* FIXME: Add some status info here */
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_subdev_core_ops au8522_core_ops = {
|
|
.log_status = au8522_log_status,
|
|
.g_chip_ident = au8522_g_chip_ident,
|
|
.g_ctrl = au8522_g_ctrl,
|
|
.s_ctrl = au8522_s_ctrl,
|
|
.queryctrl = au8522_queryctrl,
|
|
.reset = au8522_reset,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = au8522_g_register,
|
|
.s_register = au8522_s_register,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_tuner_ops au8522_tuner_ops = {
|
|
.g_tuner = au8522_g_tuner,
|
|
};
|
|
|
|
static const struct v4l2_subdev_audio_ops au8522_audio_ops = {
|
|
.s_routing = au8522_s_audio_routing,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops au8522_video_ops = {
|
|
.s_routing = au8522_s_video_routing,
|
|
.s_stream = au8522_s_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops au8522_ops = {
|
|
.core = &au8522_core_ops,
|
|
.tuner = &au8522_tuner_ops,
|
|
.audio = &au8522_audio_ops,
|
|
.video = &au8522_video_ops,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static int au8522_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *did)
|
|
{
|
|
struct au8522_state *state;
|
|
struct v4l2_subdev *sd;
|
|
int instance;
|
|
struct au8522_config *demod_config;
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA)) {
|
|
return -EIO;
|
|
}
|
|
|
|
/* allocate memory for the internal state */
|
|
instance = au8522_get_state(&state, client->adapter, client->addr);
|
|
switch (instance) {
|
|
case 0:
|
|
printk(KERN_ERR "au8522_decoder allocation failed\n");
|
|
return -EIO;
|
|
case 1:
|
|
/* new demod instance */
|
|
printk(KERN_INFO "au8522_decoder creating new instance...\n");
|
|
break;
|
|
default:
|
|
/* existing demod instance */
|
|
printk(KERN_INFO "au8522_decoder attach existing instance.\n");
|
|
break;
|
|
}
|
|
|
|
demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL);
|
|
if (demod_config == NULL) {
|
|
if (instance == 1)
|
|
kfree(state);
|
|
return -ENOMEM;
|
|
}
|
|
demod_config->demod_address = 0x8e >> 1;
|
|
|
|
state->config = demod_config;
|
|
state->i2c = client->adapter;
|
|
|
|
sd = &state->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &au8522_ops);
|
|
|
|
state->c = client;
|
|
state->vid_input = AU8522_COMPOSITE_CH1;
|
|
state->aud_input = AU8522_AUDIO_NONE;
|
|
state->id = 8522;
|
|
state->rev = 0;
|
|
|
|
/* Jam open the i2c gate to the tuner */
|
|
au8522_writereg(state, 0x106, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int au8522_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
v4l2_device_unregister_subdev(sd);
|
|
au8522_release_state(to_state(sd));
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id au8522_id[] = {
|
|
{"au8522", 0},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, au8522_id);
|
|
|
|
static struct i2c_driver au8522_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "au8522",
|
|
},
|
|
.probe = au8522_probe,
|
|
.remove = au8522_remove,
|
|
.id_table = au8522_id,
|
|
};
|
|
|
|
static __init int init_au8522(void)
|
|
{
|
|
return i2c_add_driver(&au8522_driver);
|
|
}
|
|
|
|
static __exit void exit_au8522(void)
|
|
{
|
|
i2c_del_driver(&au8522_driver);
|
|
}
|
|
|
|
module_init(init_au8522);
|
|
module_exit(exit_au8522);
|