mirror of https://gitee.com/openkylin/linux.git
1660 lines
42 KiB
C
1660 lines
42 KiB
C
/*
|
|
* PXA168 ethernet driver.
|
|
* Most of the code is derived from mv643xx ethernet driver.
|
|
*
|
|
* Copyright (C) 2010 Marvell International Ltd.
|
|
* Sachin Sanap <ssanap@marvell.com>
|
|
* Zhangfei Gao <zgao6@marvell.com>
|
|
* Philip Rakity <prakity@marvell.com>
|
|
* Mark Brown <markb@marvell.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/udp.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/io.h>
|
|
#include <linux/types.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/system.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <linux/pxa168_eth.h>
|
|
|
|
#define DRIVER_NAME "pxa168-eth"
|
|
#define DRIVER_VERSION "0.3"
|
|
|
|
/*
|
|
* Registers
|
|
*/
|
|
|
|
#define PHY_ADDRESS 0x0000
|
|
#define SMI 0x0010
|
|
#define PORT_CONFIG 0x0400
|
|
#define PORT_CONFIG_EXT 0x0408
|
|
#define PORT_COMMAND 0x0410
|
|
#define PORT_STATUS 0x0418
|
|
#define HTPR 0x0428
|
|
#define SDMA_CONFIG 0x0440
|
|
#define SDMA_CMD 0x0448
|
|
#define INT_CAUSE 0x0450
|
|
#define INT_W_CLEAR 0x0454
|
|
#define INT_MASK 0x0458
|
|
#define ETH_F_RX_DESC_0 0x0480
|
|
#define ETH_C_RX_DESC_0 0x04A0
|
|
#define ETH_C_TX_DESC_1 0x04E4
|
|
|
|
/* smi register */
|
|
#define SMI_BUSY (1 << 28) /* 0 - Write, 1 - Read */
|
|
#define SMI_R_VALID (1 << 27) /* 0 - Write, 1 - Read */
|
|
#define SMI_OP_W (0 << 26) /* Write operation */
|
|
#define SMI_OP_R (1 << 26) /* Read operation */
|
|
|
|
#define PHY_WAIT_ITERATIONS 10
|
|
|
|
#define PXA168_ETH_PHY_ADDR_DEFAULT 0
|
|
/* RX & TX descriptor command */
|
|
#define BUF_OWNED_BY_DMA (1 << 31)
|
|
|
|
/* RX descriptor status */
|
|
#define RX_EN_INT (1 << 23)
|
|
#define RX_FIRST_DESC (1 << 17)
|
|
#define RX_LAST_DESC (1 << 16)
|
|
#define RX_ERROR (1 << 15)
|
|
|
|
/* TX descriptor command */
|
|
#define TX_EN_INT (1 << 23)
|
|
#define TX_GEN_CRC (1 << 22)
|
|
#define TX_ZERO_PADDING (1 << 18)
|
|
#define TX_FIRST_DESC (1 << 17)
|
|
#define TX_LAST_DESC (1 << 16)
|
|
#define TX_ERROR (1 << 15)
|
|
|
|
/* SDMA_CMD */
|
|
#define SDMA_CMD_AT (1 << 31)
|
|
#define SDMA_CMD_TXDL (1 << 24)
|
|
#define SDMA_CMD_TXDH (1 << 23)
|
|
#define SDMA_CMD_AR (1 << 15)
|
|
#define SDMA_CMD_ERD (1 << 7)
|
|
|
|
/* Bit definitions of the Port Config Reg */
|
|
#define PCR_HS (1 << 12)
|
|
#define PCR_EN (1 << 7)
|
|
#define PCR_PM (1 << 0)
|
|
|
|
/* Bit definitions of the Port Config Extend Reg */
|
|
#define PCXR_2BSM (1 << 28)
|
|
#define PCXR_DSCP_EN (1 << 21)
|
|
#define PCXR_MFL_1518 (0 << 14)
|
|
#define PCXR_MFL_1536 (1 << 14)
|
|
#define PCXR_MFL_2048 (2 << 14)
|
|
#define PCXR_MFL_64K (3 << 14)
|
|
#define PCXR_FLP (1 << 11)
|
|
#define PCXR_PRIO_TX_OFF 3
|
|
#define PCXR_TX_HIGH_PRI (7 << PCXR_PRIO_TX_OFF)
|
|
|
|
/* Bit definitions of the SDMA Config Reg */
|
|
#define SDCR_BSZ_OFF 12
|
|
#define SDCR_BSZ8 (3 << SDCR_BSZ_OFF)
|
|
#define SDCR_BSZ4 (2 << SDCR_BSZ_OFF)
|
|
#define SDCR_BSZ2 (1 << SDCR_BSZ_OFF)
|
|
#define SDCR_BSZ1 (0 << SDCR_BSZ_OFF)
|
|
#define SDCR_BLMR (1 << 6)
|
|
#define SDCR_BLMT (1 << 7)
|
|
#define SDCR_RIFB (1 << 9)
|
|
#define SDCR_RC_OFF 2
|
|
#define SDCR_RC_MAX_RETRANS (0xf << SDCR_RC_OFF)
|
|
|
|
/*
|
|
* Bit definitions of the Interrupt Cause Reg
|
|
* and Interrupt MASK Reg is the same
|
|
*/
|
|
#define ICR_RXBUF (1 << 0)
|
|
#define ICR_TXBUF_H (1 << 2)
|
|
#define ICR_TXBUF_L (1 << 3)
|
|
#define ICR_TXEND_H (1 << 6)
|
|
#define ICR_TXEND_L (1 << 7)
|
|
#define ICR_RXERR (1 << 8)
|
|
#define ICR_TXERR_H (1 << 10)
|
|
#define ICR_TXERR_L (1 << 11)
|
|
#define ICR_TX_UDR (1 << 13)
|
|
#define ICR_MII_CH (1 << 28)
|
|
|
|
#define ALL_INTS (ICR_TXBUF_H | ICR_TXBUF_L | ICR_TX_UDR |\
|
|
ICR_TXERR_H | ICR_TXERR_L |\
|
|
ICR_TXEND_H | ICR_TXEND_L |\
|
|
ICR_RXBUF | ICR_RXERR | ICR_MII_CH)
|
|
|
|
#define ETH_HW_IP_ALIGN 2 /* hw aligns IP header */
|
|
|
|
#define NUM_RX_DESCS 64
|
|
#define NUM_TX_DESCS 64
|
|
|
|
#define HASH_ADD 0
|
|
#define HASH_DELETE 1
|
|
#define HASH_ADDR_TABLE_SIZE 0x4000 /* 16K (1/2K address - PCR_HS == 1) */
|
|
#define HOP_NUMBER 12
|
|
|
|
/* Bit definitions for Port status */
|
|
#define PORT_SPEED_100 (1 << 0)
|
|
#define FULL_DUPLEX (1 << 1)
|
|
#define FLOW_CONTROL_ENABLED (1 << 2)
|
|
#define LINK_UP (1 << 3)
|
|
|
|
/* Bit definitions for work to be done */
|
|
#define WORK_LINK (1 << 0)
|
|
#define WORK_TX_DONE (1 << 1)
|
|
|
|
/*
|
|
* Misc definitions.
|
|
*/
|
|
#define SKB_DMA_REALIGN ((PAGE_SIZE - NET_SKB_PAD) % SMP_CACHE_BYTES)
|
|
|
|
struct rx_desc {
|
|
u32 cmd_sts; /* Descriptor command status */
|
|
u16 byte_cnt; /* Descriptor buffer byte count */
|
|
u16 buf_size; /* Buffer size */
|
|
u32 buf_ptr; /* Descriptor buffer pointer */
|
|
u32 next_desc_ptr; /* Next descriptor pointer */
|
|
};
|
|
|
|
struct tx_desc {
|
|
u32 cmd_sts; /* Command/status field */
|
|
u16 reserved;
|
|
u16 byte_cnt; /* buffer byte count */
|
|
u32 buf_ptr; /* pointer to buffer for this descriptor */
|
|
u32 next_desc_ptr; /* Pointer to next descriptor */
|
|
};
|
|
|
|
struct pxa168_eth_private {
|
|
int port_num; /* User Ethernet port number */
|
|
|
|
int rx_resource_err; /* Rx ring resource error flag */
|
|
|
|
/* Next available and first returning Rx resource */
|
|
int rx_curr_desc_q, rx_used_desc_q;
|
|
|
|
/* Next available and first returning Tx resource */
|
|
int tx_curr_desc_q, tx_used_desc_q;
|
|
|
|
struct rx_desc *p_rx_desc_area;
|
|
dma_addr_t rx_desc_dma;
|
|
int rx_desc_area_size;
|
|
struct sk_buff **rx_skb;
|
|
|
|
struct tx_desc *p_tx_desc_area;
|
|
dma_addr_t tx_desc_dma;
|
|
int tx_desc_area_size;
|
|
struct sk_buff **tx_skb;
|
|
|
|
struct work_struct tx_timeout_task;
|
|
|
|
struct net_device *dev;
|
|
struct napi_struct napi;
|
|
u8 work_todo;
|
|
int skb_size;
|
|
|
|
struct net_device_stats stats;
|
|
/* Size of Tx Ring per queue */
|
|
int tx_ring_size;
|
|
/* Number of tx descriptors in use */
|
|
int tx_desc_count;
|
|
/* Size of Rx Ring per queue */
|
|
int rx_ring_size;
|
|
/* Number of rx descriptors in use */
|
|
int rx_desc_count;
|
|
|
|
/*
|
|
* Used in case RX Ring is empty, which can occur when
|
|
* system does not have resources (skb's)
|
|
*/
|
|
struct timer_list timeout;
|
|
struct mii_bus *smi_bus;
|
|
struct phy_device *phy;
|
|
|
|
/* clock */
|
|
struct clk *clk;
|
|
struct pxa168_eth_platform_data *pd;
|
|
/*
|
|
* Ethernet controller base address.
|
|
*/
|
|
void __iomem *base;
|
|
|
|
/* Pointer to the hardware address filter table */
|
|
void *htpr;
|
|
dma_addr_t htpr_dma;
|
|
};
|
|
|
|
struct addr_table_entry {
|
|
__le32 lo;
|
|
__le32 hi;
|
|
};
|
|
|
|
/* Bit fields of a Hash Table Entry */
|
|
enum hash_table_entry {
|
|
HASH_ENTRY_VALID = 1,
|
|
SKIP = 2,
|
|
HASH_ENTRY_RECEIVE_DISCARD = 4,
|
|
HASH_ENTRY_RECEIVE_DISCARD_BIT = 2
|
|
};
|
|
|
|
static int pxa168_get_settings(struct net_device *dev, struct ethtool_cmd *cmd);
|
|
static int pxa168_set_settings(struct net_device *dev, struct ethtool_cmd *cmd);
|
|
static int pxa168_init_hw(struct pxa168_eth_private *pep);
|
|
static void eth_port_reset(struct net_device *dev);
|
|
static void eth_port_start(struct net_device *dev);
|
|
static int pxa168_eth_open(struct net_device *dev);
|
|
static int pxa168_eth_stop(struct net_device *dev);
|
|
static int ethernet_phy_setup(struct net_device *dev);
|
|
|
|
static inline u32 rdl(struct pxa168_eth_private *pep, int offset)
|
|
{
|
|
return readl(pep->base + offset);
|
|
}
|
|
|
|
static inline void wrl(struct pxa168_eth_private *pep, int offset, u32 data)
|
|
{
|
|
writel(data, pep->base + offset);
|
|
}
|
|
|
|
static void abort_dma(struct pxa168_eth_private *pep)
|
|
{
|
|
int delay;
|
|
int max_retries = 40;
|
|
|
|
do {
|
|
wrl(pep, SDMA_CMD, SDMA_CMD_AR | SDMA_CMD_AT);
|
|
udelay(100);
|
|
|
|
delay = 10;
|
|
while ((rdl(pep, SDMA_CMD) & (SDMA_CMD_AR | SDMA_CMD_AT))
|
|
&& delay-- > 0) {
|
|
udelay(10);
|
|
}
|
|
} while (max_retries-- > 0 && delay <= 0);
|
|
|
|
if (max_retries <= 0)
|
|
printk(KERN_ERR "%s : DMA Stuck\n", __func__);
|
|
}
|
|
|
|
static int ethernet_phy_get(struct pxa168_eth_private *pep)
|
|
{
|
|
unsigned int reg_data;
|
|
|
|
reg_data = rdl(pep, PHY_ADDRESS);
|
|
|
|
return (reg_data >> (5 * pep->port_num)) & 0x1f;
|
|
}
|
|
|
|
static void ethernet_phy_set_addr(struct pxa168_eth_private *pep, int phy_addr)
|
|
{
|
|
u32 reg_data;
|
|
int addr_shift = 5 * pep->port_num;
|
|
|
|
reg_data = rdl(pep, PHY_ADDRESS);
|
|
reg_data &= ~(0x1f << addr_shift);
|
|
reg_data |= (phy_addr & 0x1f) << addr_shift;
|
|
wrl(pep, PHY_ADDRESS, reg_data);
|
|
}
|
|
|
|
static void ethernet_phy_reset(struct pxa168_eth_private *pep)
|
|
{
|
|
int data;
|
|
|
|
data = phy_read(pep->phy, MII_BMCR);
|
|
if (data < 0)
|
|
return;
|
|
|
|
data |= BMCR_RESET;
|
|
if (phy_write(pep->phy, MII_BMCR, data) < 0)
|
|
return;
|
|
|
|
do {
|
|
data = phy_read(pep->phy, MII_BMCR);
|
|
} while (data >= 0 && data & BMCR_RESET);
|
|
}
|
|
|
|
static void rxq_refill(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
struct sk_buff *skb;
|
|
struct rx_desc *p_used_rx_desc;
|
|
int used_rx_desc;
|
|
|
|
while (pep->rx_desc_count < pep->rx_ring_size) {
|
|
int size;
|
|
|
|
skb = dev_alloc_skb(pep->skb_size);
|
|
if (!skb)
|
|
break;
|
|
if (SKB_DMA_REALIGN)
|
|
skb_reserve(skb, SKB_DMA_REALIGN);
|
|
pep->rx_desc_count++;
|
|
/* Get 'used' Rx descriptor */
|
|
used_rx_desc = pep->rx_used_desc_q;
|
|
p_used_rx_desc = &pep->p_rx_desc_area[used_rx_desc];
|
|
size = skb->end - skb->data;
|
|
p_used_rx_desc->buf_ptr = dma_map_single(NULL,
|
|
skb->data,
|
|
size,
|
|
DMA_FROM_DEVICE);
|
|
p_used_rx_desc->buf_size = size;
|
|
pep->rx_skb[used_rx_desc] = skb;
|
|
|
|
/* Return the descriptor to DMA ownership */
|
|
wmb();
|
|
p_used_rx_desc->cmd_sts = BUF_OWNED_BY_DMA | RX_EN_INT;
|
|
wmb();
|
|
|
|
/* Move the used descriptor pointer to the next descriptor */
|
|
pep->rx_used_desc_q = (used_rx_desc + 1) % pep->rx_ring_size;
|
|
|
|
/* Any Rx return cancels the Rx resource error status */
|
|
pep->rx_resource_err = 0;
|
|
|
|
skb_reserve(skb, ETH_HW_IP_ALIGN);
|
|
}
|
|
|
|
/*
|
|
* If RX ring is empty of SKB, set a timer to try allocating
|
|
* again at a later time.
|
|
*/
|
|
if (pep->rx_desc_count == 0) {
|
|
pep->timeout.expires = jiffies + (HZ / 10);
|
|
add_timer(&pep->timeout);
|
|
}
|
|
}
|
|
|
|
static inline void rxq_refill_timer_wrapper(unsigned long data)
|
|
{
|
|
struct pxa168_eth_private *pep = (void *)data;
|
|
napi_schedule(&pep->napi);
|
|
}
|
|
|
|
static inline u8 flip_8_bits(u8 x)
|
|
{
|
|
return (((x) & 0x01) << 3) | (((x) & 0x02) << 1)
|
|
| (((x) & 0x04) >> 1) | (((x) & 0x08) >> 3)
|
|
| (((x) & 0x10) << 3) | (((x) & 0x20) << 1)
|
|
| (((x) & 0x40) >> 1) | (((x) & 0x80) >> 3);
|
|
}
|
|
|
|
static void nibble_swap_every_byte(unsigned char *mac_addr)
|
|
{
|
|
int i;
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
mac_addr[i] = ((mac_addr[i] & 0x0f) << 4) |
|
|
((mac_addr[i] & 0xf0) >> 4);
|
|
}
|
|
}
|
|
|
|
static void inverse_every_nibble(unsigned char *mac_addr)
|
|
{
|
|
int i;
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
mac_addr[i] = flip_8_bits(mac_addr[i]);
|
|
}
|
|
|
|
/*
|
|
* ----------------------------------------------------------------------------
|
|
* This function will calculate the hash function of the address.
|
|
* Inputs
|
|
* mac_addr_orig - MAC address.
|
|
* Outputs
|
|
* return the calculated entry.
|
|
*/
|
|
static u32 hash_function(unsigned char *mac_addr_orig)
|
|
{
|
|
u32 hash_result;
|
|
u32 addr0;
|
|
u32 addr1;
|
|
u32 addr2;
|
|
u32 addr3;
|
|
unsigned char mac_addr[ETH_ALEN];
|
|
|
|
/* Make a copy of MAC address since we are going to performe bit
|
|
* operations on it
|
|
*/
|
|
memcpy(mac_addr, mac_addr_orig, ETH_ALEN);
|
|
|
|
nibble_swap_every_byte(mac_addr);
|
|
inverse_every_nibble(mac_addr);
|
|
|
|
addr0 = (mac_addr[5] >> 2) & 0x3f;
|
|
addr1 = (mac_addr[5] & 0x03) | (((mac_addr[4] & 0x7f)) << 2);
|
|
addr2 = ((mac_addr[4] & 0x80) >> 7) | mac_addr[3] << 1;
|
|
addr3 = (mac_addr[2] & 0xff) | ((mac_addr[1] & 1) << 8);
|
|
|
|
hash_result = (addr0 << 9) | (addr1 ^ addr2 ^ addr3);
|
|
hash_result = hash_result & 0x07ff;
|
|
return hash_result;
|
|
}
|
|
|
|
/*
|
|
* ----------------------------------------------------------------------------
|
|
* This function will add/del an entry to the address table.
|
|
* Inputs
|
|
* pep - ETHERNET .
|
|
* mac_addr - MAC address.
|
|
* skip - if 1, skip this address.Used in case of deleting an entry which is a
|
|
* part of chain in the hash table.We can't just delete the entry since
|
|
* that will break the chain.We need to defragment the tables time to
|
|
* time.
|
|
* rd - 0 Discard packet upon match.
|
|
* - 1 Receive packet upon match.
|
|
* Outputs
|
|
* address table entry is added/deleted.
|
|
* 0 if success.
|
|
* -ENOSPC if table full
|
|
*/
|
|
static int add_del_hash_entry(struct pxa168_eth_private *pep,
|
|
unsigned char *mac_addr,
|
|
u32 rd, u32 skip, int del)
|
|
{
|
|
struct addr_table_entry *entry, *start;
|
|
u32 new_high;
|
|
u32 new_low;
|
|
u32 i;
|
|
|
|
new_low = (((mac_addr[1] >> 4) & 0xf) << 15)
|
|
| (((mac_addr[1] >> 0) & 0xf) << 11)
|
|
| (((mac_addr[0] >> 4) & 0xf) << 7)
|
|
| (((mac_addr[0] >> 0) & 0xf) << 3)
|
|
| (((mac_addr[3] >> 4) & 0x1) << 31)
|
|
| (((mac_addr[3] >> 0) & 0xf) << 27)
|
|
| (((mac_addr[2] >> 4) & 0xf) << 23)
|
|
| (((mac_addr[2] >> 0) & 0xf) << 19)
|
|
| (skip << SKIP) | (rd << HASH_ENTRY_RECEIVE_DISCARD_BIT)
|
|
| HASH_ENTRY_VALID;
|
|
|
|
new_high = (((mac_addr[5] >> 4) & 0xf) << 15)
|
|
| (((mac_addr[5] >> 0) & 0xf) << 11)
|
|
| (((mac_addr[4] >> 4) & 0xf) << 7)
|
|
| (((mac_addr[4] >> 0) & 0xf) << 3)
|
|
| (((mac_addr[3] >> 5) & 0x7) << 0);
|
|
|
|
/*
|
|
* Pick the appropriate table, start scanning for free/reusable
|
|
* entries at the index obtained by hashing the specified MAC address
|
|
*/
|
|
start = (struct addr_table_entry *)(pep->htpr);
|
|
entry = start + hash_function(mac_addr);
|
|
for (i = 0; i < HOP_NUMBER; i++) {
|
|
if (!(le32_to_cpu(entry->lo) & HASH_ENTRY_VALID)) {
|
|
break;
|
|
} else {
|
|
/* if same address put in same position */
|
|
if (((le32_to_cpu(entry->lo) & 0xfffffff8) ==
|
|
(new_low & 0xfffffff8)) &&
|
|
(le32_to_cpu(entry->hi) == new_high)) {
|
|
break;
|
|
}
|
|
}
|
|
if (entry == start + 0x7ff)
|
|
entry = start;
|
|
else
|
|
entry++;
|
|
}
|
|
|
|
if (((le32_to_cpu(entry->lo) & 0xfffffff8) != (new_low & 0xfffffff8)) &&
|
|
(le32_to_cpu(entry->hi) != new_high) && del)
|
|
return 0;
|
|
|
|
if (i == HOP_NUMBER) {
|
|
if (!del) {
|
|
printk(KERN_INFO "%s: table section is full, need to "
|
|
"move to 16kB implementation?\n",
|
|
__FILE__);
|
|
return -ENOSPC;
|
|
} else
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Update the selected entry
|
|
*/
|
|
if (del) {
|
|
entry->hi = 0;
|
|
entry->lo = 0;
|
|
} else {
|
|
entry->hi = cpu_to_le32(new_high);
|
|
entry->lo = cpu_to_le32(new_low);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ----------------------------------------------------------------------------
|
|
* Create an addressTable entry from MAC address info
|
|
* found in the specifed net_device struct
|
|
*
|
|
* Input : pointer to ethernet interface network device structure
|
|
* Output : N/A
|
|
*/
|
|
static void update_hash_table_mac_address(struct pxa168_eth_private *pep,
|
|
unsigned char *oaddr,
|
|
unsigned char *addr)
|
|
{
|
|
/* Delete old entry */
|
|
if (oaddr)
|
|
add_del_hash_entry(pep, oaddr, 1, 0, HASH_DELETE);
|
|
/* Add new entry */
|
|
add_del_hash_entry(pep, addr, 1, 0, HASH_ADD);
|
|
}
|
|
|
|
static int init_hash_table(struct pxa168_eth_private *pep)
|
|
{
|
|
/*
|
|
* Hardware expects CPU to build a hash table based on a predefined
|
|
* hash function and populate it based on hardware address. The
|
|
* location of the hash table is identified by 32-bit pointer stored
|
|
* in HTPR internal register. Two possible sizes exists for the hash
|
|
* table 8kB (256kB of DRAM required (4 x 64 kB banks)) and 1/2kB
|
|
* (16kB of DRAM required (4 x 4 kB banks)).We currently only support
|
|
* 1/2kB.
|
|
*/
|
|
/* TODO: Add support for 8kB hash table and alternative hash
|
|
* function.Driver can dynamically switch to them if the 1/2kB hash
|
|
* table is full.
|
|
*/
|
|
if (pep->htpr == NULL) {
|
|
pep->htpr = dma_alloc_coherent(pep->dev->dev.parent,
|
|
HASH_ADDR_TABLE_SIZE,
|
|
&pep->htpr_dma, GFP_KERNEL);
|
|
if (pep->htpr == NULL)
|
|
return -ENOMEM;
|
|
}
|
|
memset(pep->htpr, 0, HASH_ADDR_TABLE_SIZE);
|
|
wrl(pep, HTPR, pep->htpr_dma);
|
|
return 0;
|
|
}
|
|
|
|
static void pxa168_eth_set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
struct netdev_hw_addr *ha;
|
|
u32 val;
|
|
|
|
val = rdl(pep, PORT_CONFIG);
|
|
if (dev->flags & IFF_PROMISC)
|
|
val |= PCR_PM;
|
|
else
|
|
val &= ~PCR_PM;
|
|
wrl(pep, PORT_CONFIG, val);
|
|
|
|
/*
|
|
* Remove the old list of MAC address and add dev->addr
|
|
* and multicast address.
|
|
*/
|
|
memset(pep->htpr, 0, HASH_ADDR_TABLE_SIZE);
|
|
update_hash_table_mac_address(pep, NULL, dev->dev_addr);
|
|
|
|
netdev_for_each_mc_addr(ha, dev)
|
|
update_hash_table_mac_address(pep, NULL, ha->addr);
|
|
}
|
|
|
|
static int pxa168_eth_set_mac_address(struct net_device *dev, void *addr)
|
|
{
|
|
struct sockaddr *sa = addr;
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
unsigned char oldMac[ETH_ALEN];
|
|
|
|
if (!is_valid_ether_addr(sa->sa_data))
|
|
return -EINVAL;
|
|
memcpy(oldMac, dev->dev_addr, ETH_ALEN);
|
|
memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
|
|
netif_addr_lock_bh(dev);
|
|
update_hash_table_mac_address(pep, oldMac, dev->dev_addr);
|
|
netif_addr_unlock_bh(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void eth_port_start(struct net_device *dev)
|
|
{
|
|
unsigned int val = 0;
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
int tx_curr_desc, rx_curr_desc;
|
|
|
|
/* Perform PHY reset, if there is a PHY. */
|
|
if (pep->phy != NULL) {
|
|
struct ethtool_cmd cmd;
|
|
|
|
pxa168_get_settings(pep->dev, &cmd);
|
|
ethernet_phy_reset(pep);
|
|
pxa168_set_settings(pep->dev, &cmd);
|
|
}
|
|
|
|
/* Assignment of Tx CTRP of given queue */
|
|
tx_curr_desc = pep->tx_curr_desc_q;
|
|
wrl(pep, ETH_C_TX_DESC_1,
|
|
(u32) (pep->tx_desc_dma + tx_curr_desc * sizeof(struct tx_desc)));
|
|
|
|
/* Assignment of Rx CRDP of given queue */
|
|
rx_curr_desc = pep->rx_curr_desc_q;
|
|
wrl(pep, ETH_C_RX_DESC_0,
|
|
(u32) (pep->rx_desc_dma + rx_curr_desc * sizeof(struct rx_desc)));
|
|
|
|
wrl(pep, ETH_F_RX_DESC_0,
|
|
(u32) (pep->rx_desc_dma + rx_curr_desc * sizeof(struct rx_desc)));
|
|
|
|
/* Clear all interrupts */
|
|
wrl(pep, INT_CAUSE, 0);
|
|
|
|
/* Enable all interrupts for receive, transmit and error. */
|
|
wrl(pep, INT_MASK, ALL_INTS);
|
|
|
|
val = rdl(pep, PORT_CONFIG);
|
|
val |= PCR_EN;
|
|
wrl(pep, PORT_CONFIG, val);
|
|
|
|
/* Start RX DMA engine */
|
|
val = rdl(pep, SDMA_CMD);
|
|
val |= SDMA_CMD_ERD;
|
|
wrl(pep, SDMA_CMD, val);
|
|
}
|
|
|
|
static void eth_port_reset(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
unsigned int val = 0;
|
|
|
|
/* Stop all interrupts for receive, transmit and error. */
|
|
wrl(pep, INT_MASK, 0);
|
|
|
|
/* Clear all interrupts */
|
|
wrl(pep, INT_CAUSE, 0);
|
|
|
|
/* Stop RX DMA */
|
|
val = rdl(pep, SDMA_CMD);
|
|
val &= ~SDMA_CMD_ERD; /* abort dma command */
|
|
|
|
/* Abort any transmit and receive operations and put DMA
|
|
* in idle state.
|
|
*/
|
|
abort_dma(pep);
|
|
|
|
/* Disable port */
|
|
val = rdl(pep, PORT_CONFIG);
|
|
val &= ~PCR_EN;
|
|
wrl(pep, PORT_CONFIG, val);
|
|
}
|
|
|
|
/*
|
|
* txq_reclaim - Free the tx desc data for completed descriptors
|
|
* If force is non-zero, frees uncompleted descriptors as well
|
|
*/
|
|
static int txq_reclaim(struct net_device *dev, int force)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
struct tx_desc *desc;
|
|
u32 cmd_sts;
|
|
struct sk_buff *skb;
|
|
int tx_index;
|
|
dma_addr_t addr;
|
|
int count;
|
|
int released = 0;
|
|
|
|
netif_tx_lock(dev);
|
|
|
|
pep->work_todo &= ~WORK_TX_DONE;
|
|
while (pep->tx_desc_count > 0) {
|
|
tx_index = pep->tx_used_desc_q;
|
|
desc = &pep->p_tx_desc_area[tx_index];
|
|
cmd_sts = desc->cmd_sts;
|
|
if (!force && (cmd_sts & BUF_OWNED_BY_DMA)) {
|
|
if (released > 0) {
|
|
goto txq_reclaim_end;
|
|
} else {
|
|
released = -1;
|
|
goto txq_reclaim_end;
|
|
}
|
|
}
|
|
pep->tx_used_desc_q = (tx_index + 1) % pep->tx_ring_size;
|
|
pep->tx_desc_count--;
|
|
addr = desc->buf_ptr;
|
|
count = desc->byte_cnt;
|
|
skb = pep->tx_skb[tx_index];
|
|
if (skb)
|
|
pep->tx_skb[tx_index] = NULL;
|
|
|
|
if (cmd_sts & TX_ERROR) {
|
|
if (net_ratelimit())
|
|
printk(KERN_ERR "%s: Error in TX\n", dev->name);
|
|
dev->stats.tx_errors++;
|
|
}
|
|
dma_unmap_single(NULL, addr, count, DMA_TO_DEVICE);
|
|
if (skb)
|
|
dev_kfree_skb_irq(skb);
|
|
released++;
|
|
}
|
|
txq_reclaim_end:
|
|
netif_tx_unlock(dev);
|
|
return released;
|
|
}
|
|
|
|
static void pxa168_eth_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
|
|
printk(KERN_INFO "%s: TX timeout desc_count %d\n",
|
|
dev->name, pep->tx_desc_count);
|
|
|
|
schedule_work(&pep->tx_timeout_task);
|
|
}
|
|
|
|
static void pxa168_eth_tx_timeout_task(struct work_struct *work)
|
|
{
|
|
struct pxa168_eth_private *pep = container_of(work,
|
|
struct pxa168_eth_private,
|
|
tx_timeout_task);
|
|
struct net_device *dev = pep->dev;
|
|
pxa168_eth_stop(dev);
|
|
pxa168_eth_open(dev);
|
|
}
|
|
|
|
static int rxq_process(struct net_device *dev, int budget)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
struct net_device_stats *stats = &dev->stats;
|
|
unsigned int received_packets = 0;
|
|
struct sk_buff *skb;
|
|
|
|
while (budget-- > 0) {
|
|
int rx_next_curr_desc, rx_curr_desc, rx_used_desc;
|
|
struct rx_desc *rx_desc;
|
|
unsigned int cmd_sts;
|
|
|
|
/* Do not process Rx ring in case of Rx ring resource error */
|
|
if (pep->rx_resource_err)
|
|
break;
|
|
rx_curr_desc = pep->rx_curr_desc_q;
|
|
rx_used_desc = pep->rx_used_desc_q;
|
|
rx_desc = &pep->p_rx_desc_area[rx_curr_desc];
|
|
cmd_sts = rx_desc->cmd_sts;
|
|
rmb();
|
|
if (cmd_sts & (BUF_OWNED_BY_DMA))
|
|
break;
|
|
skb = pep->rx_skb[rx_curr_desc];
|
|
pep->rx_skb[rx_curr_desc] = NULL;
|
|
|
|
rx_next_curr_desc = (rx_curr_desc + 1) % pep->rx_ring_size;
|
|
pep->rx_curr_desc_q = rx_next_curr_desc;
|
|
|
|
/* Rx descriptors exhausted. */
|
|
/* Set the Rx ring resource error flag */
|
|
if (rx_next_curr_desc == rx_used_desc)
|
|
pep->rx_resource_err = 1;
|
|
pep->rx_desc_count--;
|
|
dma_unmap_single(NULL, rx_desc->buf_ptr,
|
|
rx_desc->buf_size,
|
|
DMA_FROM_DEVICE);
|
|
received_packets++;
|
|
/*
|
|
* Update statistics.
|
|
* Note byte count includes 4 byte CRC count
|
|
*/
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += rx_desc->byte_cnt;
|
|
/*
|
|
* In case received a packet without first / last bits on OR
|
|
* the error summary bit is on, the packets needs to be droped.
|
|
*/
|
|
if (((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) !=
|
|
(RX_FIRST_DESC | RX_LAST_DESC))
|
|
|| (cmd_sts & RX_ERROR)) {
|
|
|
|
stats->rx_dropped++;
|
|
if ((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) !=
|
|
(RX_FIRST_DESC | RX_LAST_DESC)) {
|
|
if (net_ratelimit())
|
|
printk(KERN_ERR
|
|
"%s: Rx pkt on multiple desc\n",
|
|
dev->name);
|
|
}
|
|
if (cmd_sts & RX_ERROR)
|
|
stats->rx_errors++;
|
|
dev_kfree_skb_irq(skb);
|
|
} else {
|
|
/*
|
|
* The -4 is for the CRC in the trailer of the
|
|
* received packet
|
|
*/
|
|
skb_put(skb, rx_desc->byte_cnt - 4);
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_receive_skb(skb);
|
|
}
|
|
}
|
|
/* Fill RX ring with skb's */
|
|
rxq_refill(dev);
|
|
return received_packets;
|
|
}
|
|
|
|
static int pxa168_eth_collect_events(struct pxa168_eth_private *pep,
|
|
struct net_device *dev)
|
|
{
|
|
u32 icr;
|
|
int ret = 0;
|
|
|
|
icr = rdl(pep, INT_CAUSE);
|
|
if (icr == 0)
|
|
return IRQ_NONE;
|
|
|
|
wrl(pep, INT_CAUSE, ~icr);
|
|
if (icr & (ICR_TXBUF_H | ICR_TXBUF_L)) {
|
|
pep->work_todo |= WORK_TX_DONE;
|
|
ret = 1;
|
|
}
|
|
if (icr & ICR_RXBUF)
|
|
ret = 1;
|
|
if (icr & ICR_MII_CH) {
|
|
pep->work_todo |= WORK_LINK;
|
|
ret = 1;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void handle_link_event(struct pxa168_eth_private *pep)
|
|
{
|
|
struct net_device *dev = pep->dev;
|
|
u32 port_status;
|
|
int speed;
|
|
int duplex;
|
|
int fc;
|
|
|
|
port_status = rdl(pep, PORT_STATUS);
|
|
if (!(port_status & LINK_UP)) {
|
|
if (netif_carrier_ok(dev)) {
|
|
printk(KERN_INFO "%s: link down\n", dev->name);
|
|
netif_carrier_off(dev);
|
|
txq_reclaim(dev, 1);
|
|
}
|
|
return;
|
|
}
|
|
if (port_status & PORT_SPEED_100)
|
|
speed = 100;
|
|
else
|
|
speed = 10;
|
|
|
|
duplex = (port_status & FULL_DUPLEX) ? 1 : 0;
|
|
fc = (port_status & FLOW_CONTROL_ENABLED) ? 1 : 0;
|
|
printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
|
|
"flow control %sabled\n", dev->name,
|
|
speed, duplex ? "full" : "half", fc ? "en" : "dis");
|
|
if (!netif_carrier_ok(dev))
|
|
netif_carrier_on(dev);
|
|
}
|
|
|
|
static irqreturn_t pxa168_eth_int_handler(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_id;
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
|
|
if (unlikely(!pxa168_eth_collect_events(pep, dev)))
|
|
return IRQ_NONE;
|
|
/* Disable interrupts */
|
|
wrl(pep, INT_MASK, 0);
|
|
napi_schedule(&pep->napi);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void pxa168_eth_recalc_skb_size(struct pxa168_eth_private *pep)
|
|
{
|
|
int skb_size;
|
|
|
|
/*
|
|
* Reserve 2+14 bytes for an ethernet header (the hardware
|
|
* automatically prepends 2 bytes of dummy data to each
|
|
* received packet), 16 bytes for up to four VLAN tags, and
|
|
* 4 bytes for the trailing FCS -- 36 bytes total.
|
|
*/
|
|
skb_size = pep->dev->mtu + 36;
|
|
|
|
/*
|
|
* Make sure that the skb size is a multiple of 8 bytes, as
|
|
* the lower three bits of the receive descriptor's buffer
|
|
* size field are ignored by the hardware.
|
|
*/
|
|
pep->skb_size = (skb_size + 7) & ~7;
|
|
|
|
/*
|
|
* If NET_SKB_PAD is smaller than a cache line,
|
|
* netdev_alloc_skb() will cause skb->data to be misaligned
|
|
* to a cache line boundary. If this is the case, include
|
|
* some extra space to allow re-aligning the data area.
|
|
*/
|
|
pep->skb_size += SKB_DMA_REALIGN;
|
|
|
|
}
|
|
|
|
static int set_port_config_ext(struct pxa168_eth_private *pep)
|
|
{
|
|
int skb_size;
|
|
|
|
pxa168_eth_recalc_skb_size(pep);
|
|
if (pep->skb_size <= 1518)
|
|
skb_size = PCXR_MFL_1518;
|
|
else if (pep->skb_size <= 1536)
|
|
skb_size = PCXR_MFL_1536;
|
|
else if (pep->skb_size <= 2048)
|
|
skb_size = PCXR_MFL_2048;
|
|
else
|
|
skb_size = PCXR_MFL_64K;
|
|
|
|
/* Extended Port Configuration */
|
|
wrl(pep,
|
|
PORT_CONFIG_EXT, PCXR_2BSM | /* Two byte prefix aligns IP hdr */
|
|
PCXR_DSCP_EN | /* Enable DSCP in IP */
|
|
skb_size | PCXR_FLP | /* do not force link pass */
|
|
PCXR_TX_HIGH_PRI); /* Transmit - high priority queue */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa168_init_hw(struct pxa168_eth_private *pep)
|
|
{
|
|
int err = 0;
|
|
|
|
/* Disable interrupts */
|
|
wrl(pep, INT_MASK, 0);
|
|
wrl(pep, INT_CAUSE, 0);
|
|
/* Write to ICR to clear interrupts. */
|
|
wrl(pep, INT_W_CLEAR, 0);
|
|
/* Abort any transmit and receive operations and put DMA
|
|
* in idle state.
|
|
*/
|
|
abort_dma(pep);
|
|
/* Initialize address hash table */
|
|
err = init_hash_table(pep);
|
|
if (err)
|
|
return err;
|
|
/* SDMA configuration */
|
|
wrl(pep, SDMA_CONFIG, SDCR_BSZ8 | /* Burst size = 32 bytes */
|
|
SDCR_RIFB | /* Rx interrupt on frame */
|
|
SDCR_BLMT | /* Little endian transmit */
|
|
SDCR_BLMR | /* Little endian receive */
|
|
SDCR_RC_MAX_RETRANS); /* Max retransmit count */
|
|
/* Port Configuration */
|
|
wrl(pep, PORT_CONFIG, PCR_HS); /* Hash size is 1/2kb */
|
|
set_port_config_ext(pep);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rxq_init(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
struct rx_desc *p_rx_desc;
|
|
int size = 0, i = 0;
|
|
int rx_desc_num = pep->rx_ring_size;
|
|
|
|
/* Allocate RX skb rings */
|
|
pep->rx_skb = kmalloc(sizeof(*pep->rx_skb) * pep->rx_ring_size,
|
|
GFP_KERNEL);
|
|
if (!pep->rx_skb) {
|
|
printk(KERN_ERR "%s: Cannot alloc RX skb ring\n", dev->name);
|
|
return -ENOMEM;
|
|
}
|
|
/* Allocate RX ring */
|
|
pep->rx_desc_count = 0;
|
|
size = pep->rx_ring_size * sizeof(struct rx_desc);
|
|
pep->rx_desc_area_size = size;
|
|
pep->p_rx_desc_area = dma_alloc_coherent(pep->dev->dev.parent, size,
|
|
&pep->rx_desc_dma, GFP_KERNEL);
|
|
if (!pep->p_rx_desc_area) {
|
|
printk(KERN_ERR "%s: Cannot alloc RX ring (size %d bytes)\n",
|
|
dev->name, size);
|
|
goto out;
|
|
}
|
|
memset((void *)pep->p_rx_desc_area, 0, size);
|
|
/* initialize the next_desc_ptr links in the Rx descriptors ring */
|
|
p_rx_desc = (struct rx_desc *)pep->p_rx_desc_area;
|
|
for (i = 0; i < rx_desc_num; i++) {
|
|
p_rx_desc[i].next_desc_ptr = pep->rx_desc_dma +
|
|
((i + 1) % rx_desc_num) * sizeof(struct rx_desc);
|
|
}
|
|
/* Save Rx desc pointer to driver struct. */
|
|
pep->rx_curr_desc_q = 0;
|
|
pep->rx_used_desc_q = 0;
|
|
pep->rx_desc_area_size = rx_desc_num * sizeof(struct rx_desc);
|
|
return 0;
|
|
out:
|
|
kfree(pep->rx_skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void rxq_deinit(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
int curr;
|
|
|
|
/* Free preallocated skb's on RX rings */
|
|
for (curr = 0; pep->rx_desc_count && curr < pep->rx_ring_size; curr++) {
|
|
if (pep->rx_skb[curr]) {
|
|
dev_kfree_skb(pep->rx_skb[curr]);
|
|
pep->rx_desc_count--;
|
|
}
|
|
}
|
|
if (pep->rx_desc_count)
|
|
printk(KERN_ERR
|
|
"Error in freeing Rx Ring. %d skb's still\n",
|
|
pep->rx_desc_count);
|
|
/* Free RX ring */
|
|
if (pep->p_rx_desc_area)
|
|
dma_free_coherent(pep->dev->dev.parent, pep->rx_desc_area_size,
|
|
pep->p_rx_desc_area, pep->rx_desc_dma);
|
|
kfree(pep->rx_skb);
|
|
}
|
|
|
|
static int txq_init(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
struct tx_desc *p_tx_desc;
|
|
int size = 0, i = 0;
|
|
int tx_desc_num = pep->tx_ring_size;
|
|
|
|
pep->tx_skb = kmalloc(sizeof(*pep->tx_skb) * pep->tx_ring_size,
|
|
GFP_KERNEL);
|
|
if (!pep->tx_skb) {
|
|
printk(KERN_ERR "%s: Cannot alloc TX skb ring\n", dev->name);
|
|
return -ENOMEM;
|
|
}
|
|
/* Allocate TX ring */
|
|
pep->tx_desc_count = 0;
|
|
size = pep->tx_ring_size * sizeof(struct tx_desc);
|
|
pep->tx_desc_area_size = size;
|
|
pep->p_tx_desc_area = dma_alloc_coherent(pep->dev->dev.parent, size,
|
|
&pep->tx_desc_dma, GFP_KERNEL);
|
|
if (!pep->p_tx_desc_area) {
|
|
printk(KERN_ERR "%s: Cannot allocate Tx Ring (size %d bytes)\n",
|
|
dev->name, size);
|
|
goto out;
|
|
}
|
|
memset((void *)pep->p_tx_desc_area, 0, pep->tx_desc_area_size);
|
|
/* Initialize the next_desc_ptr links in the Tx descriptors ring */
|
|
p_tx_desc = (struct tx_desc *)pep->p_tx_desc_area;
|
|
for (i = 0; i < tx_desc_num; i++) {
|
|
p_tx_desc[i].next_desc_ptr = pep->tx_desc_dma +
|
|
((i + 1) % tx_desc_num) * sizeof(struct tx_desc);
|
|
}
|
|
pep->tx_curr_desc_q = 0;
|
|
pep->tx_used_desc_q = 0;
|
|
pep->tx_desc_area_size = tx_desc_num * sizeof(struct tx_desc);
|
|
return 0;
|
|
out:
|
|
kfree(pep->tx_skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void txq_deinit(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
|
|
/* Free outstanding skb's on TX ring */
|
|
txq_reclaim(dev, 1);
|
|
BUG_ON(pep->tx_used_desc_q != pep->tx_curr_desc_q);
|
|
/* Free TX ring */
|
|
if (pep->p_tx_desc_area)
|
|
dma_free_coherent(pep->dev->dev.parent, pep->tx_desc_area_size,
|
|
pep->p_tx_desc_area, pep->tx_desc_dma);
|
|
kfree(pep->tx_skb);
|
|
}
|
|
|
|
static int pxa168_eth_open(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
int err;
|
|
|
|
err = request_irq(dev->irq, pxa168_eth_int_handler,
|
|
IRQF_DISABLED, dev->name, dev);
|
|
if (err) {
|
|
dev_printk(KERN_ERR, &dev->dev, "can't assign irq\n");
|
|
return -EAGAIN;
|
|
}
|
|
pep->rx_resource_err = 0;
|
|
err = rxq_init(dev);
|
|
if (err != 0)
|
|
goto out_free_irq;
|
|
err = txq_init(dev);
|
|
if (err != 0)
|
|
goto out_free_rx_skb;
|
|
pep->rx_used_desc_q = 0;
|
|
pep->rx_curr_desc_q = 0;
|
|
|
|
/* Fill RX ring with skb's */
|
|
rxq_refill(dev);
|
|
pep->rx_used_desc_q = 0;
|
|
pep->rx_curr_desc_q = 0;
|
|
netif_carrier_off(dev);
|
|
eth_port_start(dev);
|
|
napi_enable(&pep->napi);
|
|
return 0;
|
|
out_free_rx_skb:
|
|
rxq_deinit(dev);
|
|
out_free_irq:
|
|
free_irq(dev->irq, dev);
|
|
return err;
|
|
}
|
|
|
|
static int pxa168_eth_stop(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
eth_port_reset(dev);
|
|
|
|
/* Disable interrupts */
|
|
wrl(pep, INT_MASK, 0);
|
|
wrl(pep, INT_CAUSE, 0);
|
|
/* Write to ICR to clear interrupts. */
|
|
wrl(pep, INT_W_CLEAR, 0);
|
|
napi_disable(&pep->napi);
|
|
del_timer_sync(&pep->timeout);
|
|
netif_carrier_off(dev);
|
|
free_irq(dev->irq, dev);
|
|
rxq_deinit(dev);
|
|
txq_deinit(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa168_eth_change_mtu(struct net_device *dev, int mtu)
|
|
{
|
|
int retval;
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
|
|
if ((mtu > 9500) || (mtu < 68))
|
|
return -EINVAL;
|
|
|
|
dev->mtu = mtu;
|
|
retval = set_port_config_ext(pep);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
/*
|
|
* Stop and then re-open the interface. This will allocate RX
|
|
* skbs of the new MTU.
|
|
* There is a possible danger that the open will not succeed,
|
|
* due to memory being full.
|
|
*/
|
|
pxa168_eth_stop(dev);
|
|
if (pxa168_eth_open(dev)) {
|
|
dev_printk(KERN_ERR, &dev->dev,
|
|
"fatal error on re-opening device after "
|
|
"MTU change\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int eth_alloc_tx_desc_index(struct pxa168_eth_private *pep)
|
|
{
|
|
int tx_desc_curr;
|
|
|
|
tx_desc_curr = pep->tx_curr_desc_q;
|
|
pep->tx_curr_desc_q = (tx_desc_curr + 1) % pep->tx_ring_size;
|
|
BUG_ON(pep->tx_curr_desc_q == pep->tx_used_desc_q);
|
|
pep->tx_desc_count++;
|
|
|
|
return tx_desc_curr;
|
|
}
|
|
|
|
static int pxa168_rx_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct pxa168_eth_private *pep =
|
|
container_of(napi, struct pxa168_eth_private, napi);
|
|
struct net_device *dev = pep->dev;
|
|
int work_done = 0;
|
|
|
|
if (unlikely(pep->work_todo & WORK_LINK)) {
|
|
pep->work_todo &= ~(WORK_LINK);
|
|
handle_link_event(pep);
|
|
}
|
|
/*
|
|
* We call txq_reclaim every time since in NAPI interupts are disabled
|
|
* and due to this we miss the TX_DONE interrupt,which is not updated in
|
|
* interrupt status register.
|
|
*/
|
|
txq_reclaim(dev, 0);
|
|
if (netif_queue_stopped(dev)
|
|
&& pep->tx_ring_size - pep->tx_desc_count > 1) {
|
|
netif_wake_queue(dev);
|
|
}
|
|
work_done = rxq_process(dev, budget);
|
|
if (work_done < budget) {
|
|
napi_complete(napi);
|
|
wrl(pep, INT_MASK, ALL_INTS);
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static int pxa168_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct tx_desc *desc;
|
|
int tx_index;
|
|
int length;
|
|
|
|
tx_index = eth_alloc_tx_desc_index(pep);
|
|
desc = &pep->p_tx_desc_area[tx_index];
|
|
length = skb->len;
|
|
pep->tx_skb[tx_index] = skb;
|
|
desc->byte_cnt = length;
|
|
desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
|
|
wmb();
|
|
desc->cmd_sts = BUF_OWNED_BY_DMA | TX_GEN_CRC | TX_FIRST_DESC |
|
|
TX_ZERO_PADDING | TX_LAST_DESC | TX_EN_INT;
|
|
wmb();
|
|
wrl(pep, SDMA_CMD, SDMA_CMD_TXDH | SDMA_CMD_ERD);
|
|
|
|
stats->tx_bytes += length;
|
|
stats->tx_packets++;
|
|
dev->trans_start = jiffies;
|
|
if (pep->tx_ring_size - pep->tx_desc_count <= 1) {
|
|
/* We handled the current skb, but now we are out of space.*/
|
|
netif_stop_queue(dev);
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int smi_wait_ready(struct pxa168_eth_private *pep)
|
|
{
|
|
int i = 0;
|
|
|
|
/* wait for the SMI register to become available */
|
|
for (i = 0; rdl(pep, SMI) & SMI_BUSY; i++) {
|
|
if (i == PHY_WAIT_ITERATIONS)
|
|
return -ETIMEDOUT;
|
|
msleep(10);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa168_smi_read(struct mii_bus *bus, int phy_addr, int regnum)
|
|
{
|
|
struct pxa168_eth_private *pep = bus->priv;
|
|
int i = 0;
|
|
int val;
|
|
|
|
if (smi_wait_ready(pep)) {
|
|
printk(KERN_WARNING "pxa168_eth: SMI bus busy timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
wrl(pep, SMI, (phy_addr << 16) | (regnum << 21) | SMI_OP_R);
|
|
/* now wait for the data to be valid */
|
|
for (i = 0; !((val = rdl(pep, SMI)) & SMI_R_VALID); i++) {
|
|
if (i == PHY_WAIT_ITERATIONS) {
|
|
printk(KERN_WARNING
|
|
"pxa168_eth: SMI bus read not valid\n");
|
|
return -ENODEV;
|
|
}
|
|
msleep(10);
|
|
}
|
|
|
|
return val & 0xffff;
|
|
}
|
|
|
|
static int pxa168_smi_write(struct mii_bus *bus, int phy_addr, int regnum,
|
|
u16 value)
|
|
{
|
|
struct pxa168_eth_private *pep = bus->priv;
|
|
|
|
if (smi_wait_ready(pep)) {
|
|
printk(KERN_WARNING "pxa168_eth: SMI bus busy timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
wrl(pep, SMI, (phy_addr << 16) | (regnum << 21) |
|
|
SMI_OP_W | (value & 0xffff));
|
|
|
|
if (smi_wait_ready(pep)) {
|
|
printk(KERN_ERR "pxa168_eth: SMI bus busy timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa168_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr,
|
|
int cmd)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
if (pep->phy != NULL)
|
|
return phy_mii_ioctl(pep->phy, ifr, cmd);
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static struct phy_device *phy_scan(struct pxa168_eth_private *pep, int phy_addr)
|
|
{
|
|
struct mii_bus *bus = pep->smi_bus;
|
|
struct phy_device *phydev;
|
|
int start;
|
|
int num;
|
|
int i;
|
|
|
|
if (phy_addr == PXA168_ETH_PHY_ADDR_DEFAULT) {
|
|
/* Scan entire range */
|
|
start = ethernet_phy_get(pep);
|
|
num = 32;
|
|
} else {
|
|
/* Use phy addr specific to platform */
|
|
start = phy_addr & 0x1f;
|
|
num = 1;
|
|
}
|
|
phydev = NULL;
|
|
for (i = 0; i < num; i++) {
|
|
int addr = (start + i) & 0x1f;
|
|
if (bus->phy_map[addr] == NULL)
|
|
mdiobus_scan(bus, addr);
|
|
|
|
if (phydev == NULL) {
|
|
phydev = bus->phy_map[addr];
|
|
if (phydev != NULL)
|
|
ethernet_phy_set_addr(pep, addr);
|
|
}
|
|
}
|
|
|
|
return phydev;
|
|
}
|
|
|
|
static void phy_init(struct pxa168_eth_private *pep, int speed, int duplex)
|
|
{
|
|
struct phy_device *phy = pep->phy;
|
|
ethernet_phy_reset(pep);
|
|
|
|
phy_attach(pep->dev, dev_name(&phy->dev), 0, PHY_INTERFACE_MODE_MII);
|
|
|
|
if (speed == 0) {
|
|
phy->autoneg = AUTONEG_ENABLE;
|
|
phy->speed = 0;
|
|
phy->duplex = 0;
|
|
phy->supported &= PHY_BASIC_FEATURES;
|
|
phy->advertising = phy->supported | ADVERTISED_Autoneg;
|
|
} else {
|
|
phy->autoneg = AUTONEG_DISABLE;
|
|
phy->advertising = 0;
|
|
phy->speed = speed;
|
|
phy->duplex = duplex;
|
|
}
|
|
phy_start_aneg(phy);
|
|
}
|
|
|
|
static int ethernet_phy_setup(struct net_device *dev)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
|
|
if (pep->pd->init)
|
|
pep->pd->init();
|
|
pep->phy = phy_scan(pep, pep->pd->phy_addr & 0x1f);
|
|
if (pep->phy != NULL)
|
|
phy_init(pep, pep->pd->speed, pep->pd->duplex);
|
|
update_hash_table_mac_address(pep, NULL, dev->dev_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa168_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
int err;
|
|
|
|
err = phy_read_status(pep->phy);
|
|
if (err == 0)
|
|
err = phy_ethtool_gset(pep->phy, cmd);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int pxa168_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
|
|
return phy_ethtool_sset(pep->phy, cmd);
|
|
}
|
|
|
|
static void pxa168_get_drvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
strncpy(info->driver, DRIVER_NAME, 32);
|
|
strncpy(info->version, DRIVER_VERSION, 32);
|
|
strncpy(info->fw_version, "N/A", 32);
|
|
strncpy(info->bus_info, "N/A", 32);
|
|
}
|
|
|
|
static const struct ethtool_ops pxa168_ethtool_ops = {
|
|
.get_settings = pxa168_get_settings,
|
|
.set_settings = pxa168_set_settings,
|
|
.get_drvinfo = pxa168_get_drvinfo,
|
|
.get_link = ethtool_op_get_link,
|
|
};
|
|
|
|
static const struct net_device_ops pxa168_eth_netdev_ops = {
|
|
.ndo_open = pxa168_eth_open,
|
|
.ndo_stop = pxa168_eth_stop,
|
|
.ndo_start_xmit = pxa168_eth_start_xmit,
|
|
.ndo_set_rx_mode = pxa168_eth_set_rx_mode,
|
|
.ndo_set_mac_address = pxa168_eth_set_mac_address,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = pxa168_eth_do_ioctl,
|
|
.ndo_change_mtu = pxa168_eth_change_mtu,
|
|
.ndo_tx_timeout = pxa168_eth_tx_timeout,
|
|
};
|
|
|
|
static int pxa168_eth_probe(struct platform_device *pdev)
|
|
{
|
|
struct pxa168_eth_private *pep = NULL;
|
|
struct net_device *dev = NULL;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
int err;
|
|
|
|
printk(KERN_NOTICE "PXA168 10/100 Ethernet Driver\n");
|
|
|
|
clk = clk_get(&pdev->dev, "MFUCLK");
|
|
if (IS_ERR(clk)) {
|
|
printk(KERN_ERR "%s: Fast Ethernet failed to get clock\n",
|
|
DRIVER_NAME);
|
|
return -ENODEV;
|
|
}
|
|
clk_enable(clk);
|
|
|
|
dev = alloc_etherdev(sizeof(struct pxa168_eth_private));
|
|
if (!dev) {
|
|
err = -ENOMEM;
|
|
goto err_clk;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, dev);
|
|
pep = netdev_priv(dev);
|
|
pep->dev = dev;
|
|
pep->clk = clk;
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
err = -ENODEV;
|
|
goto err_netdev;
|
|
}
|
|
pep->base = ioremap(res->start, res->end - res->start + 1);
|
|
if (pep->base == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_netdev;
|
|
}
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
BUG_ON(!res);
|
|
dev->irq = res->start;
|
|
dev->netdev_ops = &pxa168_eth_netdev_ops;
|
|
dev->watchdog_timeo = 2 * HZ;
|
|
dev->base_addr = 0;
|
|
SET_ETHTOOL_OPS(dev, &pxa168_ethtool_ops);
|
|
|
|
INIT_WORK(&pep->tx_timeout_task, pxa168_eth_tx_timeout_task);
|
|
|
|
printk(KERN_INFO "%s:Using random mac address\n", DRIVER_NAME);
|
|
random_ether_addr(dev->dev_addr);
|
|
|
|
pep->pd = pdev->dev.platform_data;
|
|
pep->rx_ring_size = NUM_RX_DESCS;
|
|
if (pep->pd->rx_queue_size)
|
|
pep->rx_ring_size = pep->pd->rx_queue_size;
|
|
|
|
pep->tx_ring_size = NUM_TX_DESCS;
|
|
if (pep->pd->tx_queue_size)
|
|
pep->tx_ring_size = pep->pd->tx_queue_size;
|
|
|
|
pep->port_num = pep->pd->port_number;
|
|
/* Hardware supports only 3 ports */
|
|
BUG_ON(pep->port_num > 2);
|
|
netif_napi_add(dev, &pep->napi, pxa168_rx_poll, pep->rx_ring_size);
|
|
|
|
memset(&pep->timeout, 0, sizeof(struct timer_list));
|
|
init_timer(&pep->timeout);
|
|
pep->timeout.function = rxq_refill_timer_wrapper;
|
|
pep->timeout.data = (unsigned long)pep;
|
|
|
|
pep->smi_bus = mdiobus_alloc();
|
|
if (pep->smi_bus == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_base;
|
|
}
|
|
pep->smi_bus->priv = pep;
|
|
pep->smi_bus->name = "pxa168_eth smi";
|
|
pep->smi_bus->read = pxa168_smi_read;
|
|
pep->smi_bus->write = pxa168_smi_write;
|
|
snprintf(pep->smi_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
|
|
pep->smi_bus->parent = &pdev->dev;
|
|
pep->smi_bus->phy_mask = 0xffffffff;
|
|
err = mdiobus_register(pep->smi_bus);
|
|
if (err)
|
|
goto err_free_mdio;
|
|
|
|
pxa168_init_hw(pep);
|
|
err = ethernet_phy_setup(dev);
|
|
if (err)
|
|
goto err_mdiobus;
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto err_mdiobus;
|
|
return 0;
|
|
|
|
err_mdiobus:
|
|
mdiobus_unregister(pep->smi_bus);
|
|
err_free_mdio:
|
|
mdiobus_free(pep->smi_bus);
|
|
err_base:
|
|
iounmap(pep->base);
|
|
err_netdev:
|
|
free_netdev(dev);
|
|
err_clk:
|
|
clk_disable(clk);
|
|
clk_put(clk);
|
|
return err;
|
|
}
|
|
|
|
static int pxa168_eth_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct pxa168_eth_private *pep = netdev_priv(dev);
|
|
|
|
if (pep->htpr) {
|
|
dma_free_coherent(pep->dev->dev.parent, HASH_ADDR_TABLE_SIZE,
|
|
pep->htpr, pep->htpr_dma);
|
|
pep->htpr = NULL;
|
|
}
|
|
if (pep->clk) {
|
|
clk_disable(pep->clk);
|
|
clk_put(pep->clk);
|
|
pep->clk = NULL;
|
|
}
|
|
if (pep->phy != NULL)
|
|
phy_detach(pep->phy);
|
|
|
|
iounmap(pep->base);
|
|
pep->base = NULL;
|
|
mdiobus_unregister(pep->smi_bus);
|
|
mdiobus_free(pep->smi_bus);
|
|
unregister_netdev(dev);
|
|
cancel_work_sync(&pep->tx_timeout_task);
|
|
free_netdev(dev);
|
|
platform_set_drvdata(pdev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static void pxa168_eth_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
eth_port_reset(dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int pxa168_eth_resume(struct platform_device *pdev)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static int pxa168_eth_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
#else
|
|
#define pxa168_eth_resume NULL
|
|
#define pxa168_eth_suspend NULL
|
|
#endif
|
|
|
|
static struct platform_driver pxa168_eth_driver = {
|
|
.probe = pxa168_eth_probe,
|
|
.remove = pxa168_eth_remove,
|
|
.shutdown = pxa168_eth_shutdown,
|
|
.resume = pxa168_eth_resume,
|
|
.suspend = pxa168_eth_suspend,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
},
|
|
};
|
|
|
|
static int __init pxa168_init_module(void)
|
|
{
|
|
return platform_driver_register(&pxa168_eth_driver);
|
|
}
|
|
|
|
static void __exit pxa168_cleanup_module(void)
|
|
{
|
|
platform_driver_unregister(&pxa168_eth_driver);
|
|
}
|
|
|
|
module_init(pxa168_init_module);
|
|
module_exit(pxa168_cleanup_module);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Ethernet driver for Marvell PXA168");
|
|
MODULE_ALIAS("platform:pxa168_eth");
|