linux/arch/arm/mach-omap2
Sukumar Ghorai 317379a975 omap3: nand: configurable fifo threshold to gain the throughput
Configure the FIFO THREASHOLD value different for read and write to keep busy
both filling and to drain out of FIFO at reading and writing.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17 15:32:54 -08:00
..
include/mach TI816X: Add low level debug support 2011-02-16 08:31:53 -08:00
Kconfig Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
Makefile omap: add hwspinlock device 2011-02-17 09:52:43 -08:00
Makefile.boot
board-2430sdp.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-3430sdp.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-3630sdp.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-4430sdp.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-am3517crane.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-am3517evm.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-apollon.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-cm-t35.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-cm-t3517.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-devkit8000.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-flash.c omap3: nand: prefetch in irq mode support 2011-02-17 15:32:53 -08:00
board-flash.h omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-generic.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-h4.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-igep0020.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-igep0030.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-ldp.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-n8x0.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3beagle.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3evm.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3logic.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3pandora.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3stalker.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3touchbook.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap4panda.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-overo.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-rm680.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-rx51-peripherals.c omap: rx51: Add vdda_dac supply for tvout 2010-12-22 11:06:24 -08:00
board-rx51-video.c omap: rx51: Remove tvout code that plays with gpio 40 2010-12-22 11:06:24 -08:00
board-rx51.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-ti8168evm.c TI816X: Update to use init_early 2011-02-16 08:45:46 -08:00
board-zoom-debugboard.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom-display.c OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 2011-01-10 10:54:20 +02:00
board-zoom-peripherals.c Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-14 13:13:07 -08:00
board-zoom.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
clkt2xxx_apll.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_dpllcore.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_sys.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
clock.h OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 2010-12-21 21:31:43 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
clock3xxx.c OMAP3: clock: fix incorrect rate display when switching MPU rate at boot 2010-12-21 21:08:14 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3xxx_data.c TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
clock34xx.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
clock2420_data.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
clock2430.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock2430_data.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
clock3517.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clockdomain.c OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4 2011-01-18 12:36:53 -07:00
clockdomain.h omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask 2011-01-07 13:33:08 -08:00
clockdomains2xxx_3xxx_data.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
clockdomains44xx_data.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
cm-regbits-24xx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm-regbits-34xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm1_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
cm44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cminst44xx.c OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cminst44xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
common.c Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
control.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
control.h TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
cpuidle34xx.c Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 2011-01-13 20:15:18 -08:00
devices.c OMAP: devices: Modify McSPI device to adapt to hwmod framework 2011-02-17 09:53:31 -08:00
dma.c arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR 2011-01-27 16:25:35 -08:00
dpll3xxx.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
dsp.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpio.c OMAP2+: GPIO: device registration 2010-12-07 16:26:57 -08:00
gpmc-nand.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
gpmc-onenand.c OMAP2/3: OneNAND: add 104MHz support 2010-12-21 12:05:34 -08:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c omap3: nand: configurable fifo threshold to gain the throughput 2011-02-17 15:32:54 -08:00
hsmmc.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
hsmmc.h Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25 13:46:56 -07:00
hwspinlock.c omap: add hwspinlock device 2011-02-17 09:52:43 -08:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
io.c omap: gpmc: enable irq mode in gpmc 2011-02-17 15:32:53 -08:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c omap iommu: move iommu_disable at fault to the above layer 2010-06-29 07:55:07 +03:00
irq.c Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
mailbox.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
mcbsp.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
mux.c arm: mach-omap2: mux: free allocated memory on error exit 2011-02-01 15:51:36 -08:00
mux.h omap2+: Add struct omap_board_data and use it for platform level serial init 2010-12-22 18:42:35 -08:00
mux34xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux44xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux44xx.h OMAP4: mux: Add CBS package data for OMAP4430 ES2 2010-11-17 12:01:52 +01:00
mux2420.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
omap-headsmp.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap-hotplug.c ARM: CPU hotplug: remove bug checks in platform_cpu_die() 2010-12-20 15:09:10 +00:00
omap-iommu.c OMAP: iommu: make iva2 iommu selectable 2010-12-15 11:33:31 -06:00
omap-smp.c Merge branch 'misc' into devel 2011-01-06 22:32:52 +00:00
omap4-common.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
omap44xx-smc.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap_hwmod.c omap: hwmod: Populate _mpu_rt_va later on in omap_hwmod_late_init 2011-02-14 15:43:03 -08:00
omap_hwmod_3xxx_data.c OMAP3: hwmod data: Add McSPI 2011-02-17 09:53:10 -08:00
omap_hwmod_44xx_data.c OMAP4: hwmod data: Add USBOTG 2011-02-17 18:43:30 +01:00
omap_hwmod_2420_data.c OMAP2420: hwmod data: Add McSPI 2011-02-17 09:53:09 -08:00
omap_hwmod_2430_data.c OMAP2430: hwmod data: Add McSPI 2011-02-17 09:53:10 -08:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_opp_data.h omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
omap_phy_internal.c usb: otg: Adding twl6030-usb transceiver driver for OMAP4430 2010-12-10 14:43:51 +02:00
omap_twl.c OMAP2+: TWL: include pm header for init protos 2011-01-07 13:33:07 -08:00
opp.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
opp3xxx_data.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp4xxx_data.c omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm-debug.c OMAP: PM noop: implement context loss count for non-omap_devices 2010-12-21 21:31:55 -07:00
pm.c OMAP4: PM: Program correct init voltages for scalable VDDs 2010-12-22 14:31:48 -08:00
pm.h OMAP4: Register voltage PMIC parameters with the voltage layer 2010-12-22 14:31:45 -08:00
pm24xx.c console: rename acquire/release_console_sem() to console_lock/unlock() 2011-01-26 10:50:06 +10:00
pm34xx.c Merge branch 'for_2.6.38/pm-fixes' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-fixes 2011-01-31 13:20:26 -08:00
pm44xx.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2011-01-13 10:05:56 -08:00
pm_bus.c omap2+: pm_bus: make functions used as pointers as static 2011-01-07 13:33:08 -08:00
powerdomain-common.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.c OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomain.h OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomain2xxx_3xxx.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
powerdomain44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
powerdomains3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains44xx_data.c OMAP4: powerdomain: Remove L3INIT_PD OFF state 2010-12-21 22:37:28 -07:00
prcm-common.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prcm.c ARM: OMAP: Allow platforms to hook reset cleanly 2011-01-27 16:39:48 -08:00
prcm44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm2xxx_3xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.h omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg' 2011-01-07 13:33:10 -08:00
prm44xx.c OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file 2010-12-21 21:05:14 -07:00
prm44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prminst44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prminst44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
scrm44xx.h OMAP4: PRCM: Add SCRM header file 2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-nokia.c arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data 2010-12-17 15:13:46 -08:00
sdram-nokia.h arm: omap: add sdram-nokia.h 2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sdrc.h OMAP2+: use global values for the SRAM PA addresses 2010-12-21 14:45:56 -08:00
sdrc2xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
serial.c TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
smartreflex-class3.c OMAP3: PM: Adding smartreflex class3 driver 2010-12-22 14:31:40 -08:00
smartreflex.c OMAP: PM: SmartReflex: Fix possible null pointer read access 2011-01-31 12:59:15 -08:00
sr_device.c OMAP3+: sr_device: include pm header 2011-01-07 13:33:06 -08:00
sram34xx.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram242x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram243x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
timer-gp.c OMAP: counter_32k: init clocksource as part of machine timer init 2011-01-18 12:04:12 -07:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c arm: omap4: usb: add platform init code for EHCI 2010-12-01 02:42:13 +05:30
usb-fs.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
usb-musb.c musb: am35x: fix compile error due to control apis 2010-12-10 10:21:35 +02:00
usb-tusb6010.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
voltage.c arm: mach-omap2: voltage: debugfs: fix memory leak 2011-01-31 12:59:14 -08:00
wd_timer.c omap2+: wdt: trivial sparse fixes 2011-01-06 19:58:28 -08:00
wd_timer.h OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c 2010-12-21 19:56:17 -07:00