mirror of https://gitee.com/openkylin/linux.git
996 lines
25 KiB
C
996 lines
25 KiB
C
/*
|
|
* Apple Onboard Audio driver for tas codec
|
|
*
|
|
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
|
|
*
|
|
* GPL v2, can be found in COPYING.
|
|
*
|
|
* Open questions:
|
|
* - How to distinguish between 3004 and versions?
|
|
*
|
|
* FIXMEs:
|
|
* - This codec driver doesn't honour the 'connected'
|
|
* property of the aoa_codec struct, hence if
|
|
* it is used in machines where not everything is
|
|
* connected it will display wrong mixer elements.
|
|
* - Driver assumes that the microphone is always
|
|
* monaureal and connected to the right channel of
|
|
* the input. This should also be a codec-dependent
|
|
* flag, maybe the codec should have 3 different
|
|
* bits for the three different possibilities how
|
|
* it can be hooked up...
|
|
* But as long as I don't see any hardware hooked
|
|
* up that way...
|
|
* - As Apple notes in their code, the tas3004 seems
|
|
* to delay the right channel by one sample. You can
|
|
* see this when for example recording stereo in
|
|
* audacity, or recording the tas output via cable
|
|
* on another machine (use a sinus generator or so).
|
|
* I tried programming the BiQuads but couldn't
|
|
* make the delay work, maybe someone can read the
|
|
* datasheet and fix it. The relevant Apple comment
|
|
* is in AppleTAS3004Audio.cpp lines 1637 ff. Note
|
|
* that their comment describing how they program
|
|
* the filters sucks...
|
|
*
|
|
* Other things:
|
|
* - this should actually register *two* aoa_codec
|
|
* structs since it has two inputs. Then it must
|
|
* use the prepare callback to forbid running the
|
|
* secondary output on a different clock.
|
|
* Also, whatever bus knows how to do this must
|
|
* provide two soundbus_dev devices and the fabric
|
|
* must be able to link them correctly.
|
|
*
|
|
* I don't even know if Apple ever uses the second
|
|
* port on the tas3004 though, I don't think their
|
|
* i2s controllers can even do it. OTOH, they all
|
|
* derive the clocks from common clocks, so it
|
|
* might just be possible. The framework allows the
|
|
* codec to refine the transfer_info items in the
|
|
* usable callback, so we can simply remove the
|
|
* rates the second instance is not using when it
|
|
* actually is in use.
|
|
* Maybe we'll need to make the sound busses have
|
|
* a 'clock group id' value so the codec can
|
|
* determine if the two outputs can be driven at
|
|
* the same time. But that is likely overkill, up
|
|
* to the fabric to not link them up incorrectly,
|
|
* and up to the hardware designer to not wire
|
|
* them up in some weird unusable way.
|
|
*/
|
|
#include <stddef.h>
|
|
#include <linux/i2c.h>
|
|
#include <asm/pmac_low_i2c.h>
|
|
#include <asm/prom.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
|
|
MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("tas codec driver for snd-aoa");
|
|
|
|
#include "snd-aoa-codec-tas.h"
|
|
#include "snd-aoa-codec-tas-gain-table.h"
|
|
#include "snd-aoa-codec-tas-basstreble.h"
|
|
#include "../aoa.h"
|
|
#include "../soundbus/soundbus.h"
|
|
|
|
#define PFX "snd-aoa-codec-tas: "
|
|
|
|
|
|
struct tas {
|
|
struct aoa_codec codec;
|
|
struct i2c_client i2c;
|
|
u32 mute_l:1, mute_r:1 ,
|
|
controls_created:1 ,
|
|
drc_enabled:1,
|
|
hw_enabled:1;
|
|
u8 cached_volume_l, cached_volume_r;
|
|
u8 mixer_l[3], mixer_r[3];
|
|
u8 bass, treble;
|
|
u8 acr;
|
|
int drc_range;
|
|
/* protects hardware access against concurrency from
|
|
* userspace when hitting controls and during
|
|
* codec init/suspend/resume */
|
|
struct mutex mtx;
|
|
};
|
|
|
|
static int tas_reset_init(struct tas *tas);
|
|
|
|
static struct tas *codec_to_tas(struct aoa_codec *codec)
|
|
{
|
|
return container_of(codec, struct tas, codec);
|
|
}
|
|
|
|
static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data)
|
|
{
|
|
if (len == 1)
|
|
return i2c_smbus_write_byte_data(&tas->i2c, reg, *data);
|
|
else
|
|
return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data);
|
|
}
|
|
|
|
static void tas3004_set_drc(struct tas *tas)
|
|
{
|
|
unsigned char val[6];
|
|
|
|
if (tas->drc_enabled)
|
|
val[0] = 0x50; /* 3:1 above threshold */
|
|
else
|
|
val[0] = 0x51; /* disabled */
|
|
val[1] = 0x02; /* 1:1 below threshold */
|
|
if (tas->drc_range > 0xef)
|
|
val[2] = 0xef;
|
|
else if (tas->drc_range < 0)
|
|
val[2] = 0x00;
|
|
else
|
|
val[2] = tas->drc_range;
|
|
val[3] = 0xb0;
|
|
val[4] = 0x60;
|
|
val[5] = 0xa0;
|
|
|
|
tas_write_reg(tas, TAS_REG_DRC, 6, val);
|
|
}
|
|
|
|
static void tas_set_treble(struct tas *tas)
|
|
{
|
|
u8 tmp;
|
|
|
|
tmp = tas3004_treble(tas->treble);
|
|
tas_write_reg(tas, TAS_REG_TREBLE, 1, &tmp);
|
|
}
|
|
|
|
static void tas_set_bass(struct tas *tas)
|
|
{
|
|
u8 tmp;
|
|
|
|
tmp = tas3004_bass(tas->bass);
|
|
tas_write_reg(tas, TAS_REG_BASS, 1, &tmp);
|
|
}
|
|
|
|
static void tas_set_volume(struct tas *tas)
|
|
{
|
|
u8 block[6];
|
|
int tmp;
|
|
u8 left, right;
|
|
|
|
left = tas->cached_volume_l;
|
|
right = tas->cached_volume_r;
|
|
|
|
if (left > 177) left = 177;
|
|
if (right > 177) right = 177;
|
|
|
|
if (tas->mute_l) left = 0;
|
|
if (tas->mute_r) right = 0;
|
|
|
|
/* analysing the volume and mixer tables shows
|
|
* that they are similar enough when we shift
|
|
* the mixer table down by 4 bits. The error
|
|
* is miniscule, in just one item the error
|
|
* is 1, at a value of 0x07f17b (mixer table
|
|
* value is 0x07f17a) */
|
|
tmp = tas_gaintable[left];
|
|
block[0] = tmp>>20;
|
|
block[1] = tmp>>12;
|
|
block[2] = tmp>>4;
|
|
tmp = tas_gaintable[right];
|
|
block[3] = tmp>>20;
|
|
block[4] = tmp>>12;
|
|
block[5] = tmp>>4;
|
|
tas_write_reg(tas, TAS_REG_VOL, 6, block);
|
|
}
|
|
|
|
static void tas_set_mixer(struct tas *tas)
|
|
{
|
|
u8 block[9];
|
|
int tmp, i;
|
|
u8 val;
|
|
|
|
for (i=0;i<3;i++) {
|
|
val = tas->mixer_l[i];
|
|
if (val > 177) val = 177;
|
|
tmp = tas_gaintable[val];
|
|
block[3*i+0] = tmp>>16;
|
|
block[3*i+1] = tmp>>8;
|
|
block[3*i+2] = tmp;
|
|
}
|
|
tas_write_reg(tas, TAS_REG_LMIX, 9, block);
|
|
|
|
for (i=0;i<3;i++) {
|
|
val = tas->mixer_r[i];
|
|
if (val > 177) val = 177;
|
|
tmp = tas_gaintable[val];
|
|
block[3*i+0] = tmp>>16;
|
|
block[3*i+1] = tmp>>8;
|
|
block[3*i+2] = tmp;
|
|
}
|
|
tas_write_reg(tas, TAS_REG_RMIX, 9, block);
|
|
}
|
|
|
|
/* alsa stuff */
|
|
|
|
static int tas_dev_register(struct snd_device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_device_ops ops = {
|
|
.dev_register = tas_dev_register,
|
|
};
|
|
|
|
static int tas_snd_vol_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 2;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 177;
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_vol_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
ucontrol->value.integer.value[0] = tas->cached_volume_l;
|
|
ucontrol->value.integer.value[1] = tas->cached_volume_r;
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_vol_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
if (tas->cached_volume_l == ucontrol->value.integer.value[0]
|
|
&& tas->cached_volume_r == ucontrol->value.integer.value[1]) {
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
tas->cached_volume_l = ucontrol->value.integer.value[0];
|
|
tas->cached_volume_r = ucontrol->value.integer.value[1];
|
|
if (tas->hw_enabled)
|
|
tas_set_volume(tas);
|
|
mutex_unlock(&tas->mtx);
|
|
return 1;
|
|
}
|
|
|
|
static struct snd_kcontrol_new volume_control = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "Master Playback Volume",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
|
|
.info = tas_snd_vol_info,
|
|
.get = tas_snd_vol_get,
|
|
.put = tas_snd_vol_put,
|
|
};
|
|
|
|
#define tas_snd_mute_info snd_ctl_boolean_stereo_info
|
|
|
|
static int tas_snd_mute_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
ucontrol->value.integer.value[0] = !tas->mute_l;
|
|
ucontrol->value.integer.value[1] = !tas->mute_r;
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_mute_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
if (tas->mute_l == !ucontrol->value.integer.value[0]
|
|
&& tas->mute_r == !ucontrol->value.integer.value[1]) {
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
tas->mute_l = !ucontrol->value.integer.value[0];
|
|
tas->mute_r = !ucontrol->value.integer.value[1];
|
|
if (tas->hw_enabled)
|
|
tas_set_volume(tas);
|
|
mutex_unlock(&tas->mtx);
|
|
return 1;
|
|
}
|
|
|
|
static struct snd_kcontrol_new mute_control = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "Master Playback Switch",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
|
|
.info = tas_snd_mute_info,
|
|
.get = tas_snd_mute_get,
|
|
.put = tas_snd_mute_put,
|
|
};
|
|
|
|
static int tas_snd_mixer_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 2;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 177;
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_mixer_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
int idx = kcontrol->private_value;
|
|
|
|
mutex_lock(&tas->mtx);
|
|
ucontrol->value.integer.value[0] = tas->mixer_l[idx];
|
|
ucontrol->value.integer.value[1] = tas->mixer_r[idx];
|
|
mutex_unlock(&tas->mtx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_mixer_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
int idx = kcontrol->private_value;
|
|
|
|
mutex_lock(&tas->mtx);
|
|
if (tas->mixer_l[idx] == ucontrol->value.integer.value[0]
|
|
&& tas->mixer_r[idx] == ucontrol->value.integer.value[1]) {
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
tas->mixer_l[idx] = ucontrol->value.integer.value[0];
|
|
tas->mixer_r[idx] = ucontrol->value.integer.value[1];
|
|
|
|
if (tas->hw_enabled)
|
|
tas_set_mixer(tas);
|
|
mutex_unlock(&tas->mtx);
|
|
return 1;
|
|
}
|
|
|
|
#define MIXER_CONTROL(n,descr,idx) \
|
|
static struct snd_kcontrol_new n##_control = { \
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
|
|
.name = descr " Playback Volume", \
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
|
|
.info = tas_snd_mixer_info, \
|
|
.get = tas_snd_mixer_get, \
|
|
.put = tas_snd_mixer_put, \
|
|
.private_value = idx, \
|
|
}
|
|
|
|
MIXER_CONTROL(pcm1, "PCM", 0);
|
|
MIXER_CONTROL(monitor, "Monitor", 2);
|
|
|
|
static int tas_snd_drc_range_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = TAS3004_DRC_MAX;
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_drc_range_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
ucontrol->value.integer.value[0] = tas->drc_range;
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_drc_range_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
if (tas->drc_range == ucontrol->value.integer.value[0]) {
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
tas->drc_range = ucontrol->value.integer.value[0];
|
|
if (tas->hw_enabled)
|
|
tas3004_set_drc(tas);
|
|
mutex_unlock(&tas->mtx);
|
|
return 1;
|
|
}
|
|
|
|
static struct snd_kcontrol_new drc_range_control = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "DRC Range",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
|
|
.info = tas_snd_drc_range_info,
|
|
.get = tas_snd_drc_range_get,
|
|
.put = tas_snd_drc_range_put,
|
|
};
|
|
|
|
#define tas_snd_drc_switch_info snd_ctl_boolean_mono_info
|
|
|
|
static int tas_snd_drc_switch_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
ucontrol->value.integer.value[0] = tas->drc_enabled;
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_drc_switch_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
if (tas->drc_enabled == ucontrol->value.integer.value[0]) {
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
tas->drc_enabled = ucontrol->value.integer.value[0];
|
|
if (tas->hw_enabled)
|
|
tas3004_set_drc(tas);
|
|
mutex_unlock(&tas->mtx);
|
|
return 1;
|
|
}
|
|
|
|
static struct snd_kcontrol_new drc_switch_control = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "DRC Range Switch",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
|
|
.info = tas_snd_drc_switch_info,
|
|
.get = tas_snd_drc_switch_get,
|
|
.put = tas_snd_drc_switch_put,
|
|
};
|
|
|
|
static int tas_snd_capture_source_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
static char *texts[] = { "Line-In", "Microphone" };
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
|
|
uinfo->count = 1;
|
|
uinfo->value.enumerated.items = 2;
|
|
if (uinfo->value.enumerated.item > 1)
|
|
uinfo->value.enumerated.item = 1;
|
|
strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_capture_source_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
ucontrol->value.enumerated.item[0] = !!(tas->acr & TAS_ACR_INPUT_B);
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_capture_source_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
int oldacr;
|
|
|
|
mutex_lock(&tas->mtx);
|
|
oldacr = tas->acr;
|
|
|
|
/*
|
|
* Despite what the data sheet says in one place, the
|
|
* TAS_ACR_B_MONAUREAL bit forces mono output even when
|
|
* input A (line in) is selected.
|
|
*/
|
|
tas->acr &= ~(TAS_ACR_INPUT_B | TAS_ACR_B_MONAUREAL);
|
|
if (ucontrol->value.enumerated.item[0])
|
|
tas->acr |= TAS_ACR_INPUT_B | TAS_ACR_B_MONAUREAL |
|
|
TAS_ACR_B_MON_SEL_RIGHT;
|
|
if (oldacr == tas->acr) {
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
if (tas->hw_enabled)
|
|
tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr);
|
|
mutex_unlock(&tas->mtx);
|
|
return 1;
|
|
}
|
|
|
|
static struct snd_kcontrol_new capture_source_control = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
/* If we name this 'Input Source', it properly shows up in
|
|
* alsamixer as a selection, * but it's shown under the
|
|
* 'Playback' category.
|
|
* If I name it 'Capture Source', it shows up in strange
|
|
* ways (two bools of which one can be selected at a
|
|
* time) but at least it's shown in the 'Capture'
|
|
* category.
|
|
* I was told that this was due to backward compatibility,
|
|
* but I don't understand then why the mangling is *not*
|
|
* done when I name it "Input Source".....
|
|
*/
|
|
.name = "Capture Source",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
|
|
.info = tas_snd_capture_source_info,
|
|
.get = tas_snd_capture_source_get,
|
|
.put = tas_snd_capture_source_put,
|
|
};
|
|
|
|
static int tas_snd_treble_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = TAS3004_TREBLE_MIN;
|
|
uinfo->value.integer.max = TAS3004_TREBLE_MAX;
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_treble_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
ucontrol->value.integer.value[0] = tas->treble;
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_treble_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
if (tas->treble == ucontrol->value.integer.value[0]) {
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
tas->treble = ucontrol->value.integer.value[0];
|
|
if (tas->hw_enabled)
|
|
tas_set_treble(tas);
|
|
mutex_unlock(&tas->mtx);
|
|
return 1;
|
|
}
|
|
|
|
static struct snd_kcontrol_new treble_control = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "Treble",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
|
|
.info = tas_snd_treble_info,
|
|
.get = tas_snd_treble_get,
|
|
.put = tas_snd_treble_put,
|
|
};
|
|
|
|
static int tas_snd_bass_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = TAS3004_BASS_MIN;
|
|
uinfo->value.integer.max = TAS3004_BASS_MAX;
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_bass_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
ucontrol->value.integer.value[0] = tas->bass;
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
static int tas_snd_bass_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct tas *tas = snd_kcontrol_chip(kcontrol);
|
|
|
|
mutex_lock(&tas->mtx);
|
|
if (tas->bass == ucontrol->value.integer.value[0]) {
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
tas->bass = ucontrol->value.integer.value[0];
|
|
if (tas->hw_enabled)
|
|
tas_set_bass(tas);
|
|
mutex_unlock(&tas->mtx);
|
|
return 1;
|
|
}
|
|
|
|
static struct snd_kcontrol_new bass_control = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "Bass",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
|
|
.info = tas_snd_bass_info,
|
|
.get = tas_snd_bass_get,
|
|
.put = tas_snd_bass_put,
|
|
};
|
|
|
|
static struct transfer_info tas_transfers[] = {
|
|
{
|
|
/* input */
|
|
.formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_BE |
|
|
SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE,
|
|
.rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
|
|
.transfer_in = 1,
|
|
},
|
|
{
|
|
/* output */
|
|
.formats = SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S16_BE |
|
|
SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S24_BE,
|
|
.rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
|
|
.transfer_in = 0,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static int tas_usable(struct codec_info_item *cii,
|
|
struct transfer_info *ti,
|
|
struct transfer_info *out)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static int tas_reset_init(struct tas *tas)
|
|
{
|
|
u8 tmp;
|
|
|
|
tas->codec.gpio->methods->all_amps_off(tas->codec.gpio);
|
|
msleep(5);
|
|
tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 0);
|
|
msleep(5);
|
|
tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 1);
|
|
msleep(20);
|
|
tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 0);
|
|
msleep(10);
|
|
tas->codec.gpio->methods->all_amps_restore(tas->codec.gpio);
|
|
|
|
tmp = TAS_MCS_SCLK64 | TAS_MCS_SPORT_MODE_I2S | TAS_MCS_SPORT_WL_24BIT;
|
|
if (tas_write_reg(tas, TAS_REG_MCS, 1, &tmp))
|
|
goto outerr;
|
|
|
|
tas->acr |= TAS_ACR_ANALOG_PDOWN;
|
|
if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr))
|
|
goto outerr;
|
|
|
|
tmp = 0;
|
|
if (tas_write_reg(tas, TAS_REG_MCS2, 1, &tmp))
|
|
goto outerr;
|
|
|
|
tas3004_set_drc(tas);
|
|
|
|
/* Set treble & bass to 0dB */
|
|
tas->treble = TAS3004_TREBLE_ZERO;
|
|
tas->bass = TAS3004_BASS_ZERO;
|
|
tas_set_treble(tas);
|
|
tas_set_bass(tas);
|
|
|
|
tas->acr &= ~TAS_ACR_ANALOG_PDOWN;
|
|
if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr))
|
|
goto outerr;
|
|
|
|
return 0;
|
|
outerr:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int tas_switch_clock(struct codec_info_item *cii, enum clock_switch clock)
|
|
{
|
|
struct tas *tas = cii->codec_data;
|
|
|
|
switch(clock) {
|
|
case CLOCK_SWITCH_PREPARE_SLAVE:
|
|
/* Clocks are going away, mute mute mute */
|
|
tas->codec.gpio->methods->all_amps_off(tas->codec.gpio);
|
|
tas->hw_enabled = 0;
|
|
break;
|
|
case CLOCK_SWITCH_SLAVE:
|
|
/* Clocks are back, re-init the codec */
|
|
mutex_lock(&tas->mtx);
|
|
tas_reset_init(tas);
|
|
tas_set_volume(tas);
|
|
tas_set_mixer(tas);
|
|
tas->hw_enabled = 1;
|
|
tas->codec.gpio->methods->all_amps_restore(tas->codec.gpio);
|
|
mutex_unlock(&tas->mtx);
|
|
break;
|
|
default:
|
|
/* doesn't happen as of now */
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/* we are controlled via i2c and assume that is always up
|
|
* If that wasn't the case, we'd have to suspend once
|
|
* our i2c device is suspended, and then take note of that! */
|
|
static int tas_suspend(struct tas *tas)
|
|
{
|
|
mutex_lock(&tas->mtx);
|
|
tas->hw_enabled = 0;
|
|
tas->acr |= TAS_ACR_ANALOG_PDOWN;
|
|
tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr);
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
static int tas_resume(struct tas *tas)
|
|
{
|
|
/* reset codec */
|
|
mutex_lock(&tas->mtx);
|
|
tas_reset_init(tas);
|
|
tas_set_volume(tas);
|
|
tas_set_mixer(tas);
|
|
tas->hw_enabled = 1;
|
|
mutex_unlock(&tas->mtx);
|
|
return 0;
|
|
}
|
|
|
|
static int _tas_suspend(struct codec_info_item *cii, pm_message_t state)
|
|
{
|
|
return tas_suspend(cii->codec_data);
|
|
}
|
|
|
|
static int _tas_resume(struct codec_info_item *cii)
|
|
{
|
|
return tas_resume(cii->codec_data);
|
|
}
|
|
#else /* CONFIG_PM */
|
|
#define _tas_suspend NULL
|
|
#define _tas_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct codec_info tas_codec_info = {
|
|
.transfers = tas_transfers,
|
|
/* in theory, we can drive it at 512 too...
|
|
* but so far the framework doesn't allow
|
|
* for that and I don't see much point in it. */
|
|
.sysclock_factor = 256,
|
|
/* same here, could be 32 for just one 16 bit format */
|
|
.bus_factor = 64,
|
|
.owner = THIS_MODULE,
|
|
.usable = tas_usable,
|
|
.switch_clock = tas_switch_clock,
|
|
.suspend = _tas_suspend,
|
|
.resume = _tas_resume,
|
|
};
|
|
|
|
static int tas_init_codec(struct aoa_codec *codec)
|
|
{
|
|
struct tas *tas = codec_to_tas(codec);
|
|
int err;
|
|
|
|
if (!tas->codec.gpio || !tas->codec.gpio->methods) {
|
|
printk(KERN_ERR PFX "gpios not assigned!!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&tas->mtx);
|
|
if (tas_reset_init(tas)) {
|
|
printk(KERN_ERR PFX "tas failed to initialise\n");
|
|
mutex_unlock(&tas->mtx);
|
|
return -ENXIO;
|
|
}
|
|
tas->hw_enabled = 1;
|
|
mutex_unlock(&tas->mtx);
|
|
|
|
if (tas->codec.soundbus_dev->attach_codec(tas->codec.soundbus_dev,
|
|
aoa_get_card(),
|
|
&tas_codec_info, tas)) {
|
|
printk(KERN_ERR PFX "error attaching tas to soundbus\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (aoa_snd_device_new(SNDRV_DEV_LOWLEVEL, tas, &ops)) {
|
|
printk(KERN_ERR PFX "failed to create tas snd device!\n");
|
|
return -ENODEV;
|
|
}
|
|
err = aoa_snd_ctl_add(snd_ctl_new1(&volume_control, tas));
|
|
if (err)
|
|
goto error;
|
|
|
|
err = aoa_snd_ctl_add(snd_ctl_new1(&mute_control, tas));
|
|
if (err)
|
|
goto error;
|
|
|
|
err = aoa_snd_ctl_add(snd_ctl_new1(&pcm1_control, tas));
|
|
if (err)
|
|
goto error;
|
|
|
|
err = aoa_snd_ctl_add(snd_ctl_new1(&monitor_control, tas));
|
|
if (err)
|
|
goto error;
|
|
|
|
err = aoa_snd_ctl_add(snd_ctl_new1(&capture_source_control, tas));
|
|
if (err)
|
|
goto error;
|
|
|
|
err = aoa_snd_ctl_add(snd_ctl_new1(&drc_range_control, tas));
|
|
if (err)
|
|
goto error;
|
|
|
|
err = aoa_snd_ctl_add(snd_ctl_new1(&drc_switch_control, tas));
|
|
if (err)
|
|
goto error;
|
|
|
|
err = aoa_snd_ctl_add(snd_ctl_new1(&treble_control, tas));
|
|
if (err)
|
|
goto error;
|
|
|
|
err = aoa_snd_ctl_add(snd_ctl_new1(&bass_control, tas));
|
|
if (err)
|
|
goto error;
|
|
|
|
return 0;
|
|
error:
|
|
tas->codec.soundbus_dev->detach_codec(tas->codec.soundbus_dev, tas);
|
|
snd_device_free(aoa_get_card(), tas);
|
|
return err;
|
|
}
|
|
|
|
static void tas_exit_codec(struct aoa_codec *codec)
|
|
{
|
|
struct tas *tas = codec_to_tas(codec);
|
|
|
|
if (!tas->codec.soundbus_dev)
|
|
return;
|
|
tas->codec.soundbus_dev->detach_codec(tas->codec.soundbus_dev, tas);
|
|
}
|
|
|
|
|
|
static struct i2c_driver tas_driver;
|
|
|
|
static int tas_create(struct i2c_adapter *adapter,
|
|
struct device_node *node,
|
|
int addr)
|
|
{
|
|
struct tas *tas;
|
|
|
|
tas = kzalloc(sizeof(struct tas), GFP_KERNEL);
|
|
|
|
if (!tas)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&tas->mtx);
|
|
tas->i2c.driver = &tas_driver;
|
|
tas->i2c.adapter = adapter;
|
|
tas->i2c.addr = addr;
|
|
/* seems that half is a saner default */
|
|
tas->drc_range = TAS3004_DRC_MAX / 2;
|
|
strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE);
|
|
|
|
if (i2c_attach_client(&tas->i2c)) {
|
|
printk(KERN_ERR PFX "failed to attach to i2c\n");
|
|
goto fail;
|
|
}
|
|
|
|
strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN);
|
|
tas->codec.owner = THIS_MODULE;
|
|
tas->codec.init = tas_init_codec;
|
|
tas->codec.exit = tas_exit_codec;
|
|
tas->codec.node = of_node_get(node);
|
|
|
|
if (aoa_codec_register(&tas->codec)) {
|
|
goto detach;
|
|
}
|
|
printk(KERN_DEBUG
|
|
"snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n",
|
|
addr, node->full_name);
|
|
return 0;
|
|
detach:
|
|
i2c_detach_client(&tas->i2c);
|
|
fail:
|
|
mutex_destroy(&tas->mtx);
|
|
kfree(tas);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int tas_i2c_attach(struct i2c_adapter *adapter)
|
|
{
|
|
struct device_node *busnode, *dev = NULL;
|
|
struct pmac_i2c_bus *bus;
|
|
|
|
bus = pmac_i2c_adapter_to_bus(adapter);
|
|
if (bus == NULL)
|
|
return -ENODEV;
|
|
busnode = pmac_i2c_get_bus_node(bus);
|
|
|
|
while ((dev = of_get_next_child(busnode, dev)) != NULL) {
|
|
if (of_device_is_compatible(dev, "tas3004")) {
|
|
const u32 *addr;
|
|
printk(KERN_DEBUG PFX "found tas3004\n");
|
|
addr = of_get_property(dev, "reg", NULL);
|
|
if (!addr)
|
|
continue;
|
|
return tas_create(adapter, dev, ((*addr) >> 1) & 0x7f);
|
|
}
|
|
/* older machines have no 'codec' node with a 'compatible'
|
|
* property that says 'tas3004', they just have a 'deq'
|
|
* node without any such property... */
|
|
if (strcmp(dev->name, "deq") == 0) {
|
|
const u32 *_addr;
|
|
u32 addr;
|
|
printk(KERN_DEBUG PFX "found 'deq' node\n");
|
|
_addr = of_get_property(dev, "i2c-address", NULL);
|
|
if (!_addr)
|
|
continue;
|
|
addr = ((*_addr) >> 1) & 0x7f;
|
|
/* now, if the address doesn't match any of the two
|
|
* that a tas3004 can have, we cannot handle this.
|
|
* I doubt it ever happens but hey. */
|
|
if (addr != 0x34 && addr != 0x35)
|
|
continue;
|
|
return tas_create(adapter, dev, addr);
|
|
}
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int tas_i2c_detach(struct i2c_client *client)
|
|
{
|
|
struct tas *tas = container_of(client, struct tas, i2c);
|
|
int err;
|
|
u8 tmp = TAS_ACR_ANALOG_PDOWN;
|
|
|
|
if ((err = i2c_detach_client(client)))
|
|
return err;
|
|
aoa_codec_unregister(&tas->codec);
|
|
of_node_put(tas->codec.node);
|
|
|
|
/* power down codec chip */
|
|
tas_write_reg(tas, TAS_REG_ACR, 1, &tmp);
|
|
|
|
mutex_destroy(&tas->mtx);
|
|
kfree(tas);
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_driver tas_driver = {
|
|
.driver = {
|
|
.name = "aoa_codec_tas",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.attach_adapter = tas_i2c_attach,
|
|
.detach_client = tas_i2c_detach,
|
|
};
|
|
|
|
static int __init tas_init(void)
|
|
{
|
|
return i2c_add_driver(&tas_driver);
|
|
}
|
|
|
|
static void __exit tas_exit(void)
|
|
{
|
|
i2c_del_driver(&tas_driver);
|
|
}
|
|
|
|
module_init(tas_init);
|
|
module_exit(tas_exit);
|