mirror of https://gitee.com/openkylin/linux.git
131 lines
5.3 KiB
C
131 lines
5.3 KiB
C
#ifndef B43_PHY_HT_H_
|
|
#define B43_PHY_HT_H_
|
|
|
|
#include "phy_common.h"
|
|
|
|
|
|
#define B43_PHY_HT_BBCFG 0x001 /* BB config */
|
|
#define B43_PHY_HT_BBCFG_RSTCCA 0x4000 /* Reset CCA */
|
|
#define B43_PHY_HT_BBCFG_RSTRX 0x8000 /* Reset RX */
|
|
#define B43_PHY_HT_BANDCTL 0x009 /* Band control */
|
|
#define B43_PHY_HT_BANDCTL_5GHZ 0x0001 /* Use the 5GHz band */
|
|
#define B43_PHY_HT_TABLE_ADDR 0x072 /* Table address */
|
|
#define B43_PHY_HT_TABLE_DATALO 0x073 /* Table data low */
|
|
#define B43_PHY_HT_TABLE_DATAHI 0x074 /* Table data high */
|
|
#define B43_PHY_HT_CLASS_CTL 0x0B0 /* Classifier control */
|
|
#define B43_PHY_HT_CLASS_CTL_CCK_EN 0x0001 /* CCK enable */
|
|
#define B43_PHY_HT_CLASS_CTL_OFDM_EN 0x0002 /* OFDM enable */
|
|
#define B43_PHY_HT_CLASS_CTL_WAITED_EN 0x0004 /* Waited enable */
|
|
#define B43_PHY_HT_IQLOCAL_CMDGCTL 0x0C2 /* I/Q LO cal command G control */
|
|
#define B43_PHY_HT_SAMP_CMD 0x0C3 /* Sample command */
|
|
#define B43_PHY_HT_SAMP_CMD_STOP 0x0002 /* Stop */
|
|
#define B43_PHY_HT_SAMP_LOOP_CNT 0x0C4 /* Sample loop count */
|
|
#define B43_PHY_HT_SAMP_WAIT_CNT 0x0C5 /* Sample wait count */
|
|
#define B43_PHY_HT_SAMP_DEP_CNT 0x0C6 /* Sample depth count */
|
|
#define B43_PHY_HT_SAMP_STAT 0x0C7 /* Sample status */
|
|
#define B43_PHY_HT_TSSIMODE 0x122 /* TSSI mode */
|
|
#define B43_PHY_HT_TSSIMODE_EN 0x0001 /* TSSI enable */
|
|
#define B43_PHY_HT_TSSIMODE_PDEN 0x0002 /* Power det enable */
|
|
#define B43_PHY_HT_BW1 0x1CE
|
|
#define B43_PHY_HT_BW2 0x1CF
|
|
#define B43_PHY_HT_BW3 0x1D0
|
|
#define B43_PHY_HT_BW4 0x1D1
|
|
#define B43_PHY_HT_BW5 0x1D2
|
|
#define B43_PHY_HT_BW6 0x1D3
|
|
#define B43_PHY_HT_TXPCTL_CMD_C1 0x1E7 /* TX power control command */
|
|
#define B43_PHY_HT_TXPCTL_CMD_C1_INIT 0x007F /* Init */
|
|
#define B43_PHY_HT_TXPCTL_CMD_C1_COEFF 0x2000 /* Power control coefficients */
|
|
#define B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN 0x4000 /* Hardware TX power control enable */
|
|
#define B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN 0x8000 /* TX power control enable */
|
|
#define B43_PHY_HT_TXPCTL_N 0x1E8 /* TX power control N num */
|
|
#define B43_PHY_HT_TXPCTL_N_TSSID 0x00FF /* N TSSI delay */
|
|
#define B43_PHY_HT_TXPCTL_N_TSSID_SHIFT 0
|
|
#define B43_PHY_HT_TXPCTL_N_NPTIL2 0x0700 /* N PT integer log2 */
|
|
#define B43_PHY_HT_TXPCTL_N_NPTIL2_SHIFT 8
|
|
#define B43_PHY_HT_TXPCTL_IDLE_TSSI 0x1E9 /* TX power control idle TSSI */
|
|
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1 0x003F
|
|
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1_SHIFT 0
|
|
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2 0x3F00
|
|
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2_SHIFT 8
|
|
#define B43_PHY_HT_TXPCTL_IDLE_TSSI_BINF 0x8000 /* Raw TSSI offset bin format */
|
|
#define B43_PHY_HT_TXPCTL_TARG_PWR 0x1EA /* TX power control target power */
|
|
#define B43_PHY_HT_TXPCTL_TARG_PWR_C1 0x00FF /* Power 0 */
|
|
#define B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT 0
|
|
#define B43_PHY_HT_TXPCTL_TARG_PWR_C2 0xFF00 /* Power 1 */
|
|
#define B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT 8
|
|
#define B43_PHY_HT_TXPCTL_CMD_C2 0x222
|
|
#define B43_PHY_HT_TXPCTL_CMD_C2_INIT 0x007F
|
|
#define B43_PHY_HT_RSSI_C1 0x219
|
|
#define B43_PHY_HT_RSSI_C2 0x21A
|
|
#define B43_PHY_HT_RSSI_C3 0x21B
|
|
|
|
#define B43_PHY_HT_C1_CLIP1THRES B43_PHY_OFDM(0x00E)
|
|
#define B43_PHY_HT_C2_CLIP1THRES B43_PHY_OFDM(0x04E)
|
|
#define B43_PHY_HT_C3_CLIP1THRES B43_PHY_OFDM(0x08E)
|
|
|
|
#define B43_PHY_HT_RF_SEQ_MODE B43_PHY_EXTG(0x000)
|
|
#define B43_PHY_HT_RF_SEQ_MODE_CA_OVER 0x0001 /* Core active override */
|
|
#define B43_PHY_HT_RF_SEQ_MODE_TR_OVER 0x0002 /* Trigger override */
|
|
#define B43_PHY_HT_RF_SEQ_TRIG B43_PHY_EXTG(0x003)
|
|
#define B43_PHY_HT_RF_SEQ_TRIG_RX2TX 0x0001 /* RX2TX */
|
|
#define B43_PHY_HT_RF_SEQ_TRIG_TX2RX 0x0002 /* TX2RX */
|
|
#define B43_PHY_HT_RF_SEQ_TRIG_UPGH 0x0004 /* Update gain H */
|
|
#define B43_PHY_HT_RF_SEQ_TRIG_UPGL 0x0008 /* Update gain L */
|
|
#define B43_PHY_HT_RF_SEQ_TRIG_UPGU 0x0010 /* Update gain U */
|
|
#define B43_PHY_HT_RF_SEQ_TRIG_RST2RX 0x0020 /* Reset to RX */
|
|
#define B43_PHY_HT_RF_SEQ_STATUS B43_PHY_EXTG(0x004)
|
|
/* Values for the status are the same as for the trigger */
|
|
|
|
#define B43_PHY_HT_RF_CTL1 B43_PHY_EXTG(0x010)
|
|
|
|
#define B43_PHY_HT_RF_CTL_INT_C1 B43_PHY_EXTG(0x04c)
|
|
#define B43_PHY_HT_RF_CTL_INT_C2 B43_PHY_EXTG(0x06c)
|
|
#define B43_PHY_HT_RF_CTL_INT_C3 B43_PHY_EXTG(0x08c)
|
|
|
|
#define B43_PHY_HT_AFE_C1_OVER B43_PHY_EXTG(0x110)
|
|
#define B43_PHY_HT_AFE_C1 B43_PHY_EXTG(0x111)
|
|
#define B43_PHY_HT_AFE_C2_OVER B43_PHY_EXTG(0x114)
|
|
#define B43_PHY_HT_AFE_C2 B43_PHY_EXTG(0x115)
|
|
#define B43_PHY_HT_AFE_C3_OVER B43_PHY_EXTG(0x118)
|
|
#define B43_PHY_HT_AFE_C3 B43_PHY_EXTG(0x119)
|
|
|
|
#define B43_PHY_HT_TXPCTL_CMD_C3 B43_PHY_EXTG(0x164)
|
|
#define B43_PHY_HT_TXPCTL_CMD_C3_INIT 0x007F
|
|
#define B43_PHY_HT_TXPCTL_IDLE_TSSI2 B43_PHY_EXTG(0x165) /* TX power control idle TSSI */
|
|
#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3 0x003F
|
|
#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3_SHIFT 0
|
|
#define B43_PHY_HT_TXPCTL_TARG_PWR2 B43_PHY_EXTG(0x166) /* TX power control target power */
|
|
#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3 0x00FF
|
|
#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT 0
|
|
|
|
#define B43_PHY_HT_TEST B43_PHY_N_BMODE(0x00A)
|
|
|
|
|
|
/* Values for PHY registers used on channel switching */
|
|
struct b43_phy_ht_channeltab_e_phy {
|
|
u16 bw1;
|
|
u16 bw2;
|
|
u16 bw3;
|
|
u16 bw4;
|
|
u16 bw5;
|
|
u16 bw6;
|
|
};
|
|
|
|
|
|
struct b43_phy_ht {
|
|
u16 rf_ctl_int_save[3];
|
|
|
|
bool tx_pwr_ctl;
|
|
u8 tx_pwr_idx[3];
|
|
|
|
s32 bb_mult_save[3];
|
|
|
|
u8 idle_tssi[3];
|
|
};
|
|
|
|
|
|
struct b43_phy_operations;
|
|
extern const struct b43_phy_operations b43_phyops_ht;
|
|
|
|
#endif /* B43_PHY_HT_H_ */
|