mirror of https://gitee.com/openkylin/linux.git
493 lines
13 KiB
C
493 lines
13 KiB
C
/*
|
|
* STMicroelectronics gyroscopes driver
|
|
*
|
|
* Copyright 2012-2013 STMicroelectronics Inc.
|
|
*
|
|
* Denis Ciocca <denis.ciocca@st.com>
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/buffer.h>
|
|
|
|
#include <linux/iio/common/st_sensors.h>
|
|
#include "st_gyro.h"
|
|
|
|
#define ST_GYRO_NUMBER_DATA_CHANNELS 3
|
|
|
|
/* DEFAULT VALUE FOR SENSORS */
|
|
#define ST_GYRO_DEFAULT_OUT_X_L_ADDR 0x28
|
|
#define ST_GYRO_DEFAULT_OUT_Y_L_ADDR 0x2a
|
|
#define ST_GYRO_DEFAULT_OUT_Z_L_ADDR 0x2c
|
|
|
|
/* FULLSCALE */
|
|
#define ST_GYRO_FS_AVL_250DPS 250
|
|
#define ST_GYRO_FS_AVL_500DPS 500
|
|
#define ST_GYRO_FS_AVL_2000DPS 2000
|
|
|
|
/* CUSTOM VALUES FOR SENSOR 1 */
|
|
#define ST_GYRO_1_WAI_EXP 0xd3
|
|
#define ST_GYRO_1_ODR_ADDR 0x20
|
|
#define ST_GYRO_1_ODR_MASK 0xc0
|
|
#define ST_GYRO_1_ODR_AVL_100HZ_VAL 0x00
|
|
#define ST_GYRO_1_ODR_AVL_200HZ_VAL 0x01
|
|
#define ST_GYRO_1_ODR_AVL_400HZ_VAL 0x02
|
|
#define ST_GYRO_1_ODR_AVL_800HZ_VAL 0x03
|
|
#define ST_GYRO_1_PW_ADDR 0x20
|
|
#define ST_GYRO_1_PW_MASK 0x08
|
|
#define ST_GYRO_1_FS_ADDR 0x23
|
|
#define ST_GYRO_1_FS_MASK 0x30
|
|
#define ST_GYRO_1_FS_AVL_250_VAL 0x00
|
|
#define ST_GYRO_1_FS_AVL_500_VAL 0x01
|
|
#define ST_GYRO_1_FS_AVL_2000_VAL 0x02
|
|
#define ST_GYRO_1_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
|
|
#define ST_GYRO_1_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
|
|
#define ST_GYRO_1_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
|
|
#define ST_GYRO_1_BDU_ADDR 0x23
|
|
#define ST_GYRO_1_BDU_MASK 0x80
|
|
#define ST_GYRO_1_DRDY_IRQ_ADDR 0x22
|
|
#define ST_GYRO_1_DRDY_IRQ_INT2_MASK 0x08
|
|
#define ST_GYRO_1_MULTIREAD_BIT true
|
|
|
|
/* CUSTOM VALUES FOR SENSOR 2 */
|
|
#define ST_GYRO_2_WAI_EXP 0xd4
|
|
#define ST_GYRO_2_ODR_ADDR 0x20
|
|
#define ST_GYRO_2_ODR_MASK 0xc0
|
|
#define ST_GYRO_2_ODR_AVL_95HZ_VAL 0x00
|
|
#define ST_GYRO_2_ODR_AVL_190HZ_VAL 0x01
|
|
#define ST_GYRO_2_ODR_AVL_380HZ_VAL 0x02
|
|
#define ST_GYRO_2_ODR_AVL_760HZ_VAL 0x03
|
|
#define ST_GYRO_2_PW_ADDR 0x20
|
|
#define ST_GYRO_2_PW_MASK 0x08
|
|
#define ST_GYRO_2_FS_ADDR 0x23
|
|
#define ST_GYRO_2_FS_MASK 0x30
|
|
#define ST_GYRO_2_FS_AVL_250_VAL 0x00
|
|
#define ST_GYRO_2_FS_AVL_500_VAL 0x01
|
|
#define ST_GYRO_2_FS_AVL_2000_VAL 0x02
|
|
#define ST_GYRO_2_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
|
|
#define ST_GYRO_2_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
|
|
#define ST_GYRO_2_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
|
|
#define ST_GYRO_2_BDU_ADDR 0x23
|
|
#define ST_GYRO_2_BDU_MASK 0x80
|
|
#define ST_GYRO_2_DRDY_IRQ_ADDR 0x22
|
|
#define ST_GYRO_2_DRDY_IRQ_INT2_MASK 0x08
|
|
#define ST_GYRO_2_MULTIREAD_BIT true
|
|
|
|
/* CUSTOM VALUES FOR SENSOR 3 */
|
|
#define ST_GYRO_3_WAI_EXP 0xd7
|
|
#define ST_GYRO_3_ODR_ADDR 0x20
|
|
#define ST_GYRO_3_ODR_MASK 0xc0
|
|
#define ST_GYRO_3_ODR_AVL_95HZ_VAL 0x00
|
|
#define ST_GYRO_3_ODR_AVL_190HZ_VAL 0x01
|
|
#define ST_GYRO_3_ODR_AVL_380HZ_VAL 0x02
|
|
#define ST_GYRO_3_ODR_AVL_760HZ_VAL 0x03
|
|
#define ST_GYRO_3_PW_ADDR 0x20
|
|
#define ST_GYRO_3_PW_MASK 0x08
|
|
#define ST_GYRO_3_FS_ADDR 0x23
|
|
#define ST_GYRO_3_FS_MASK 0x30
|
|
#define ST_GYRO_3_FS_AVL_250_VAL 0x00
|
|
#define ST_GYRO_3_FS_AVL_500_VAL 0x01
|
|
#define ST_GYRO_3_FS_AVL_2000_VAL 0x02
|
|
#define ST_GYRO_3_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
|
|
#define ST_GYRO_3_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
|
|
#define ST_GYRO_3_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
|
|
#define ST_GYRO_3_BDU_ADDR 0x23
|
|
#define ST_GYRO_3_BDU_MASK 0x80
|
|
#define ST_GYRO_3_DRDY_IRQ_ADDR 0x22
|
|
#define ST_GYRO_3_DRDY_IRQ_INT2_MASK 0x08
|
|
#define ST_GYRO_3_MULTIREAD_BIT true
|
|
|
|
|
|
static const struct iio_chan_spec st_gyro_16bit_channels[] = {
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
|
|
ST_GYRO_DEFAULT_OUT_X_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
|
|
ST_GYRO_DEFAULT_OUT_Y_L_ADDR),
|
|
ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
|
|
ST_GYRO_DEFAULT_OUT_Z_L_ADDR),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3)
|
|
};
|
|
|
|
static const struct st_sensor_settings st_gyro_sensors_settings[] = {
|
|
{
|
|
.wai = ST_GYRO_1_WAI_EXP,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = L3G4200D_GYRO_DEV_NAME,
|
|
[1] = LSM330DL_GYRO_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
|
|
.odr = {
|
|
.addr = ST_GYRO_1_ODR_ADDR,
|
|
.mask = ST_GYRO_1_ODR_MASK,
|
|
.odr_avl = {
|
|
{ 100, ST_GYRO_1_ODR_AVL_100HZ_VAL, },
|
|
{ 200, ST_GYRO_1_ODR_AVL_200HZ_VAL, },
|
|
{ 400, ST_GYRO_1_ODR_AVL_400HZ_VAL, },
|
|
{ 800, ST_GYRO_1_ODR_AVL_800HZ_VAL, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = ST_GYRO_1_PW_ADDR,
|
|
.mask = ST_GYRO_1_PW_MASK,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = ST_GYRO_1_FS_ADDR,
|
|
.mask = ST_GYRO_1_FS_MASK,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_GYRO_FS_AVL_250DPS,
|
|
.value = ST_GYRO_1_FS_AVL_250_VAL,
|
|
.gain = ST_GYRO_1_FS_AVL_250_GAIN,
|
|
},
|
|
[1] = {
|
|
.num = ST_GYRO_FS_AVL_500DPS,
|
|
.value = ST_GYRO_1_FS_AVL_500_VAL,
|
|
.gain = ST_GYRO_1_FS_AVL_500_GAIN,
|
|
},
|
|
[2] = {
|
|
.num = ST_GYRO_FS_AVL_2000DPS,
|
|
.value = ST_GYRO_1_FS_AVL_2000_VAL,
|
|
.gain = ST_GYRO_1_FS_AVL_2000_GAIN,
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = ST_GYRO_1_BDU_ADDR,
|
|
.mask = ST_GYRO_1_BDU_MASK,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = ST_GYRO_1_DRDY_IRQ_ADDR,
|
|
.mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK,
|
|
/*
|
|
* The sensor has IHL (active low) and open
|
|
* drain settings, but only for INT1 and not
|
|
* for the DRDY line on INT2.
|
|
*/
|
|
},
|
|
.multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = ST_GYRO_2_WAI_EXP,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = L3GD20_GYRO_DEV_NAME,
|
|
[1] = LSM330D_GYRO_DEV_NAME,
|
|
[2] = LSM330DLC_GYRO_DEV_NAME,
|
|
[3] = L3G4IS_GYRO_DEV_NAME,
|
|
[4] = LSM330_GYRO_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
|
|
.odr = {
|
|
.addr = ST_GYRO_2_ODR_ADDR,
|
|
.mask = ST_GYRO_2_ODR_MASK,
|
|
.odr_avl = {
|
|
{ 95, ST_GYRO_2_ODR_AVL_95HZ_VAL, },
|
|
{ 190, ST_GYRO_2_ODR_AVL_190HZ_VAL, },
|
|
{ 380, ST_GYRO_2_ODR_AVL_380HZ_VAL, },
|
|
{ 760, ST_GYRO_2_ODR_AVL_760HZ_VAL, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = ST_GYRO_2_PW_ADDR,
|
|
.mask = ST_GYRO_2_PW_MASK,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = ST_GYRO_2_FS_ADDR,
|
|
.mask = ST_GYRO_2_FS_MASK,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_GYRO_FS_AVL_250DPS,
|
|
.value = ST_GYRO_2_FS_AVL_250_VAL,
|
|
.gain = ST_GYRO_2_FS_AVL_250_GAIN,
|
|
},
|
|
[1] = {
|
|
.num = ST_GYRO_FS_AVL_500DPS,
|
|
.value = ST_GYRO_2_FS_AVL_500_VAL,
|
|
.gain = ST_GYRO_2_FS_AVL_500_GAIN,
|
|
},
|
|
[2] = {
|
|
.num = ST_GYRO_FS_AVL_2000DPS,
|
|
.value = ST_GYRO_2_FS_AVL_2000_VAL,
|
|
.gain = ST_GYRO_2_FS_AVL_2000_GAIN,
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = ST_GYRO_2_BDU_ADDR,
|
|
.mask = ST_GYRO_2_BDU_MASK,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = ST_GYRO_2_DRDY_IRQ_ADDR,
|
|
.mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK,
|
|
/*
|
|
* The sensor has IHL (active low) and open
|
|
* drain settings, but only for INT1 and not
|
|
* for the DRDY line on INT2.
|
|
*/
|
|
},
|
|
.multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
|
|
.bootime = 2,
|
|
},
|
|
{
|
|
.wai = ST_GYRO_3_WAI_EXP,
|
|
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
|
.sensors_supported = {
|
|
[0] = L3GD20_GYRO_DEV_NAME,
|
|
},
|
|
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
|
|
.odr = {
|
|
.addr = ST_GYRO_3_ODR_ADDR,
|
|
.mask = ST_GYRO_3_ODR_MASK,
|
|
.odr_avl = {
|
|
{ 95, ST_GYRO_3_ODR_AVL_95HZ_VAL, },
|
|
{ 190, ST_GYRO_3_ODR_AVL_190HZ_VAL, },
|
|
{ 380, ST_GYRO_3_ODR_AVL_380HZ_VAL, },
|
|
{ 760, ST_GYRO_3_ODR_AVL_760HZ_VAL, },
|
|
},
|
|
},
|
|
.pw = {
|
|
.addr = ST_GYRO_3_PW_ADDR,
|
|
.mask = ST_GYRO_3_PW_MASK,
|
|
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
|
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
|
},
|
|
.enable_axis = {
|
|
.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
|
|
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
|
|
},
|
|
.fs = {
|
|
.addr = ST_GYRO_3_FS_ADDR,
|
|
.mask = ST_GYRO_3_FS_MASK,
|
|
.fs_avl = {
|
|
[0] = {
|
|
.num = ST_GYRO_FS_AVL_250DPS,
|
|
.value = ST_GYRO_3_FS_AVL_250_VAL,
|
|
.gain = ST_GYRO_3_FS_AVL_250_GAIN,
|
|
},
|
|
[1] = {
|
|
.num = ST_GYRO_FS_AVL_500DPS,
|
|
.value = ST_GYRO_3_FS_AVL_500_VAL,
|
|
.gain = ST_GYRO_3_FS_AVL_500_GAIN,
|
|
},
|
|
[2] = {
|
|
.num = ST_GYRO_FS_AVL_2000DPS,
|
|
.value = ST_GYRO_3_FS_AVL_2000_VAL,
|
|
.gain = ST_GYRO_3_FS_AVL_2000_GAIN,
|
|
},
|
|
},
|
|
},
|
|
.bdu = {
|
|
.addr = ST_GYRO_3_BDU_ADDR,
|
|
.mask = ST_GYRO_3_BDU_MASK,
|
|
},
|
|
.drdy_irq = {
|
|
.addr = ST_GYRO_3_DRDY_IRQ_ADDR,
|
|
.mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK,
|
|
/*
|
|
* The sensor has IHL (active low) and open
|
|
* drain settings, but only for INT1 and not
|
|
* for the DRDY line on INT2.
|
|
*/
|
|
},
|
|
.multi_read_bit = ST_GYRO_3_MULTIREAD_BIT,
|
|
.bootime = 2,
|
|
},
|
|
};
|
|
|
|
static int st_gyro_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *ch, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
int err;
|
|
struct st_sensor_data *gdata = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
err = st_sensors_read_info_raw(indio_dev, ch, val);
|
|
if (err < 0)
|
|
goto read_error;
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
*val2 = gdata->current_fullscale->gain;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = gdata->odr;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
read_error:
|
|
return err;
|
|
}
|
|
|
|
static int st_gyro_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val, int val2, long mask)
|
|
{
|
|
int err;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
|
|
break;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
if (val2)
|
|
return -EINVAL;
|
|
mutex_lock(&indio_dev->mlock);
|
|
err = st_sensors_set_odr(indio_dev, val);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return err;
|
|
default:
|
|
err = -EINVAL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
|
|
static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_anglvel_scale_available);
|
|
|
|
static struct attribute *st_gyro_attributes[] = {
|
|
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
|
&iio_dev_attr_in_anglvel_scale_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group st_gyro_attribute_group = {
|
|
.attrs = st_gyro_attributes,
|
|
};
|
|
|
|
static const struct iio_info gyro_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.attrs = &st_gyro_attribute_group,
|
|
.read_raw = &st_gyro_read_raw,
|
|
.write_raw = &st_gyro_write_raw,
|
|
.debugfs_reg_access = &st_sensors_debugfs_reg_access,
|
|
};
|
|
|
|
#ifdef CONFIG_IIO_TRIGGER
|
|
static const struct iio_trigger_ops st_gyro_trigger_ops = {
|
|
.owner = THIS_MODULE,
|
|
.set_trigger_state = ST_GYRO_TRIGGER_SET_STATE,
|
|
};
|
|
#define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops)
|
|
#else
|
|
#define ST_GYRO_TRIGGER_OPS NULL
|
|
#endif
|
|
|
|
int st_gyro_common_probe(struct iio_dev *indio_dev)
|
|
{
|
|
struct st_sensor_data *gdata = iio_priv(indio_dev);
|
|
int irq = gdata->get_irq_data_ready(indio_dev);
|
|
int err;
|
|
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &gyro_info;
|
|
mutex_init(&gdata->tb.buf_lock);
|
|
|
|
st_sensors_power_enable(indio_dev);
|
|
|
|
err = st_sensors_check_device_support(indio_dev,
|
|
ARRAY_SIZE(st_gyro_sensors_settings),
|
|
st_gyro_sensors_settings);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
|
|
gdata->multiread_bit = gdata->sensor_settings->multi_read_bit;
|
|
indio_dev->channels = gdata->sensor_settings->ch;
|
|
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
|
|
|
|
gdata->current_fullscale = (struct st_sensor_fullscale_avl *)
|
|
&gdata->sensor_settings->fs.fs_avl[0];
|
|
gdata->odr = gdata->sensor_settings->odr.odr_avl[0].hz;
|
|
|
|
err = st_sensors_init_sensor(indio_dev,
|
|
(struct st_sensors_platform_data *)&gyro_pdata);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = st_gyro_allocate_ring(indio_dev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (irq > 0) {
|
|
err = st_sensors_allocate_trigger(indio_dev,
|
|
ST_GYRO_TRIGGER_OPS);
|
|
if (err < 0)
|
|
goto st_gyro_probe_trigger_error;
|
|
}
|
|
|
|
err = iio_device_register(indio_dev);
|
|
if (err)
|
|
goto st_gyro_device_register_error;
|
|
|
|
dev_info(&indio_dev->dev, "registered gyroscope %s\n",
|
|
indio_dev->name);
|
|
|
|
return 0;
|
|
|
|
st_gyro_device_register_error:
|
|
if (irq > 0)
|
|
st_sensors_deallocate_trigger(indio_dev);
|
|
st_gyro_probe_trigger_error:
|
|
st_gyro_deallocate_ring(indio_dev);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(st_gyro_common_probe);
|
|
|
|
void st_gyro_common_remove(struct iio_dev *indio_dev)
|
|
{
|
|
struct st_sensor_data *gdata = iio_priv(indio_dev);
|
|
|
|
st_sensors_power_disable(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
if (gdata->get_irq_data_ready(indio_dev) > 0)
|
|
st_sensors_deallocate_trigger(indio_dev);
|
|
|
|
st_gyro_deallocate_ring(indio_dev);
|
|
}
|
|
EXPORT_SYMBOL(st_gyro_common_remove);
|
|
|
|
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics gyroscopes driver");
|
|
MODULE_LICENSE("GPL v2");
|