mirror of https://gitee.com/openkylin/linux.git
69 lines
2.1 KiB
Plaintext
69 lines
2.1 KiB
Plaintext
Rockchip specific extensions to the Synopsys Designware MIPI DSI
|
|
================================
|
|
|
|
Required properties:
|
|
- #address-cells: Should be <1>.
|
|
- #size-cells: Should be <0>.
|
|
- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
|
|
"rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi".
|
|
- reg: Represent the physical address range of the controller.
|
|
- interrupts: Represent the controller's interrupt to the CPU(s).
|
|
- clocks, clock-names: Phandles to the controller's pll reference
|
|
clock(ref) and APB clock(pclk). For RK3399, a phy config clock
|
|
(phy_cfg) and a grf clock(grf) are required. As described in [1].
|
|
- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
|
|
- ports: contain a port node with endpoint definitions as defined in [2].
|
|
For vopb,set the reg = <0> and set the reg = <1> for vopl.
|
|
|
|
Optional properties:
|
|
- power-domains: a phandle to mipi dsi power domain node.
|
|
- resets: list of phandle + reset specifier pairs, as described in [3].
|
|
- reset-names: string reset name, must be "apb".
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
[2] Documentation/devicetree/bindings/media/video-interfaces.txt
|
|
[3] Documentation/devicetree/bindings/reset/reset.txt
|
|
|
|
Example:
|
|
mipi_dsi: mipi@ff960000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
|
|
reg = <0xff960000 0x4000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
|
|
clock-names = "ref", "pclk";
|
|
resets = <&cru SRST_MIPIDSI0>;
|
|
reset-names = "apb";
|
|
rockchip,grf = <&grf>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
mipi_in: port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
mipi_in_vopb: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&vopb_out_mipi>;
|
|
};
|
|
mipi_in_vopl: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&vopl_out_mipi>;
|
|
};
|
|
};
|
|
};
|
|
|
|
panel {
|
|
compatible ="boe,tv080wum-nl0";
|
|
reg = <0>;
|
|
|
|
enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_en>;
|
|
backlight = <&backlight>;
|
|
};
|
|
};
|