mirror of https://gitee.com/openkylin/linux.git
41 lines
1.6 KiB
Plaintext
41 lines
1.6 KiB
Plaintext
* Freescale i.MX6 SLL IOMUX Controller
|
|
|
|
Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
|
|
and usage.
|
|
|
|
Required properties:
|
|
- compatible: "fsl,imx6sll-iomuxc"
|
|
- fsl,pins: each entry consists of 6 integers and represents the mux and config
|
|
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
|
|
input_val> are specified using a PIN_FUNC_ID macro, which can be found in
|
|
imx6sll-pinfunc.h under device tree source folder. The last integer CONFIG is
|
|
the pad setting value like pull-up on this pin. Please refer to i.MX6SLL
|
|
Reference Manual for detailed CONFIG settings.
|
|
|
|
CONFIG bits definition:
|
|
PAD_CTL_LVE (1 << 22)
|
|
PAD_CTL_HYS (1 << 16)
|
|
PAD_CTL_PUS_100K_DOWN (0 << 14)
|
|
PAD_CTL_PUS_47K_UP (1 << 14)
|
|
PAD_CTL_PUS_100K_UP (2 << 14)
|
|
PAD_CTL_PUS_22K_UP (3 << 14)
|
|
PAD_CTL_PUE (1 << 13)
|
|
PAD_CTL_PKE (1 << 12)
|
|
PAD_CTL_ODE (1 << 11)
|
|
PAD_CTL_SPEED_LOW (0 << 6)
|
|
PAD_CTL_SPEED_MED (1 << 6)
|
|
PAD_CTL_SPEED_HIGH (3 << 6)
|
|
PAD_CTL_DSE_DISABLE (0 << 3)
|
|
PAD_CTL_DSE_260ohm (1 << 3)
|
|
PAD_CTL_DSE_130ohm (2 << 3)
|
|
PAD_CTL_DSE_87ohm (3 << 3)
|
|
PAD_CTL_DSE_65ohm (4 << 3)
|
|
PAD_CTL_DSE_52ohm (5 << 3)
|
|
PAD_CTL_DSE_43ohm (6 << 3)
|
|
PAD_CTL_DSE_37ohm (7 << 3)
|
|
PAD_CTL_SRE_FAST (1 << 0)
|
|
PAD_CTL_SRE_SLOW (0 << 0)
|
|
|
|
Refer to imx6sll-pinfunc.h in device tree source folder for all available
|
|
imx6sll PIN_FUNC_ID.
|