mirror of https://gitee.com/openkylin/linux.git
106 lines
3.5 KiB
Plaintext
106 lines
3.5 KiB
Plaintext
Binding for Xilinx Zynq Pinctrl
|
|
|
|
Required properties:
|
|
- compatible: "xlnx,zynq-pinctrl"
|
|
- syscon: phandle to SLCR
|
|
- reg: Offset and length of pinctrl space in SLCR
|
|
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the
|
|
common pinctrl bindings used by client devices, including the meaning of the
|
|
phrase "pin configuration node".
|
|
|
|
Zynq's pin configuration nodes act as a container for an arbitrary number of
|
|
subnodes. Each of these subnodes represents some desired configuration for a
|
|
pin, a group, or a list of pins or groups. This configuration can include the
|
|
mux function to select on those pin(s)/group(s), and various pin configuration
|
|
parameters, such as pull-up, slew rate, etc.
|
|
|
|
Each configuration node can consist of multiple nodes describing the pinmux and
|
|
pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
|
|
|
|
The name of each subnode is not important; all subnodes should be enumerated
|
|
and processed purely based on their content.
|
|
|
|
Required properties for pinmux nodes are:
|
|
- groups: A list of pinmux groups.
|
|
- function: The name of a pinmux function to activate for the specified set
|
|
of groups.
|
|
|
|
Required properties for configuration nodes:
|
|
One of:
|
|
- pins: a list of pin names
|
|
- groups: A list of pinmux groups.
|
|
|
|
The following generic properties as defined in pinctrl-bindings.txt are valid
|
|
to specify in a pinmux subnode:
|
|
groups, function
|
|
|
|
The following generic properties as defined in pinctrl-bindings.txt are valid
|
|
to specify in a pinconf subnode:
|
|
groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate,
|
|
low-power-disable, low-power-enable
|
|
|
|
Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast
|
|
respectively.
|
|
|
|
Valid values for groups are:
|
|
ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp,
|
|
qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp - spi0_2_grp,
|
|
spi0_X_ssY (X=0..2, Y=0..2), spi1_0_grp - spi1_3_grp,
|
|
spi1_X_ssY (X=0..3, Y=0..2), sdio0_0_grp - sdio0_2_grp,
|
|
sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
|
|
sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand,
|
|
can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp,
|
|
uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp,
|
|
ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp,
|
|
gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp
|
|
|
|
Valid values for pins are:
|
|
MIO0 - MIO53
|
|
|
|
Valid values for function are:
|
|
ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1,
|
|
spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, sdio0_cd, sdio0_wp,
|
|
sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
|
|
smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1,
|
|
i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1
|
|
|
|
The following driver-specific properties as defined here are valid to specify in
|
|
a pin configuration subnode:
|
|
- io-standard: Configure the pin to use the selected IO standard according to
|
|
this mapping:
|
|
1: LVCMOS18
|
|
2: LVCMOS25
|
|
3: LVCMOS33
|
|
4: HSTL
|
|
|
|
Example:
|
|
pinctrl0: pinctrl@700 {
|
|
compatible = "xlnx,pinctrl-zynq";
|
|
reg = <0x700 0x200>;
|
|
syscon = <&slcr>;
|
|
|
|
pinctrl_uart1_default: uart1-default {
|
|
mux {
|
|
groups = "uart1_10_grp";
|
|
function = "uart1";
|
|
};
|
|
|
|
conf {
|
|
groups = "uart1_10_grp";
|
|
slew-rate = <0>;
|
|
io-standard = <1>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO49";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO48";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|