mirror of https://gitee.com/openkylin/linux.git
309 lines
8.3 KiB
C
309 lines
8.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
|
// http://www.samsung.com
|
|
//
|
|
// Based on arch/arm/mach-vexpress/dcscb.c
|
|
|
|
#include <linux/arm-cci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/syscore_ops.h>
|
|
#include <linux/soc/samsung/exynos-regs-pmu.h>
|
|
|
|
#include <asm/cputype.h>
|
|
#include <asm/cp15.h>
|
|
#include <asm/mcpm.h>
|
|
#include <asm/smp_plat.h>
|
|
|
|
#include "common.h"
|
|
|
|
#define EXYNOS5420_CPUS_PER_CLUSTER 4
|
|
#define EXYNOS5420_NR_CLUSTERS 2
|
|
|
|
#define EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN BIT(9)
|
|
#define EXYNOS5420_USE_ARM_CORE_DOWN_STATE BIT(29)
|
|
#define EXYNOS5420_USE_L2_COMMON_UP_STATE BIT(30)
|
|
|
|
static void __iomem *ns_sram_base_addr __ro_after_init;
|
|
|
|
/*
|
|
* The common v7_exit_coherency_flush API could not be used because of the
|
|
* Erratum 799270 workaround. This macro is the same as the common one (in
|
|
* arch/arm/include/asm/cacheflush.h) except for the erratum handling.
|
|
*/
|
|
#define exynos_v7_exit_coherency_flush(level) \
|
|
asm volatile( \
|
|
"stmfd sp!, {fp, ip}\n\t"\
|
|
"mrc p15, 0, r0, c1, c0, 0 @ get SCTLR\n\t" \
|
|
"bic r0, r0, #"__stringify(CR_C)"\n\t" \
|
|
"mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \
|
|
"isb\n\t"\
|
|
"bl v7_flush_dcache_"__stringify(level)"\n\t" \
|
|
"mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \
|
|
"bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \
|
|
/* Dummy Load of a device register to avoid Erratum 799270 */ \
|
|
"ldr r4, [%0]\n\t" \
|
|
"and r4, r4, #0\n\t" \
|
|
"orr r0, r0, r4\n\t" \
|
|
"mcr p15, 0, r0, c1, c0, 1 @ set ACTLR\n\t" \
|
|
"isb\n\t" \
|
|
"dsb\n\t" \
|
|
"ldmfd sp!, {fp, ip}" \
|
|
: \
|
|
: "Ir" (pmu_base_addr + S5P_INFORM0) \
|
|
: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
|
|
"r9", "r10", "lr", "memory")
|
|
|
|
static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
|
|
{
|
|
unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
|
|
|
|
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
|
|
if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
|
|
cluster >= EXYNOS5420_NR_CLUSTERS)
|
|
return -EINVAL;
|
|
|
|
if (!exynos_cpu_power_state(cpunr)) {
|
|
exynos_cpu_power_up(cpunr);
|
|
|
|
/*
|
|
* This assumes the cluster number of the big cores(Cortex A15)
|
|
* is 0 and the Little cores(Cortex A7) is 1.
|
|
* When the system was booted from the Little core,
|
|
* they should be reset during power up cpu.
|
|
*/
|
|
if (cluster &&
|
|
cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
|
|
unsigned int timeout = 16;
|
|
|
|
/*
|
|
* Before we reset the Little cores, we should wait
|
|
* the SPARE2 register is set to 1 because the init
|
|
* codes of the iROM will set the register after
|
|
* initialization.
|
|
*/
|
|
while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) {
|
|
timeout--;
|
|
udelay(10);
|
|
}
|
|
|
|
if (timeout == 0) {
|
|
pr_err("cpu %u cluster %u powerup failed\n",
|
|
cpu, cluster);
|
|
exynos_cpu_power_down(cpunr);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
|
|
EXYNOS_SWRESET);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_cluster_powerup(unsigned int cluster)
|
|
{
|
|
pr_debug("%s: cluster %u\n", __func__, cluster);
|
|
if (cluster >= EXYNOS5420_NR_CLUSTERS)
|
|
return -EINVAL;
|
|
|
|
exynos_cluster_power_up(cluster);
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
|
|
{
|
|
unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
|
|
|
|
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
|
|
BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
|
|
cluster >= EXYNOS5420_NR_CLUSTERS);
|
|
exynos_cpu_power_down(cpunr);
|
|
}
|
|
|
|
static void exynos_cluster_powerdown_prepare(unsigned int cluster)
|
|
{
|
|
pr_debug("%s: cluster %u\n", __func__, cluster);
|
|
BUG_ON(cluster >= EXYNOS5420_NR_CLUSTERS);
|
|
exynos_cluster_power_down(cluster);
|
|
}
|
|
|
|
static void exynos_cpu_cache_disable(void)
|
|
{
|
|
/* Disable and flush the local CPU cache. */
|
|
exynos_v7_exit_coherency_flush(louis);
|
|
}
|
|
|
|
static void exynos_cluster_cache_disable(void)
|
|
{
|
|
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
|
|
/*
|
|
* On the Cortex-A15 we need to disable
|
|
* L2 prefetching before flushing the cache.
|
|
*/
|
|
asm volatile(
|
|
"mcr p15, 1, %0, c15, c0, 3\n\t"
|
|
"isb\n\t"
|
|
"dsb"
|
|
: : "r" (0x400));
|
|
}
|
|
|
|
/* Flush all cache levels for this cluster. */
|
|
exynos_v7_exit_coherency_flush(all);
|
|
|
|
/*
|
|
* Disable cluster-level coherency by masking
|
|
* incoming snoops and DVM messages:
|
|
*/
|
|
cci_disable_port_by_cpu(read_cpuid_mpidr());
|
|
}
|
|
|
|
static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
|
|
{
|
|
unsigned int tries = 100;
|
|
unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
|
|
|
|
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
|
|
BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
|
|
cluster >= EXYNOS5420_NR_CLUSTERS);
|
|
|
|
/* Wait for the core state to be OFF */
|
|
while (tries--) {
|
|
if ((exynos_cpu_power_state(cpunr) == 0))
|
|
return 0; /* success: the CPU is halted */
|
|
|
|
/* Otherwise, wait and retry: */
|
|
msleep(1);
|
|
}
|
|
|
|
return -ETIMEDOUT; /* timeout */
|
|
}
|
|
|
|
static void exynos_cpu_is_up(unsigned int cpu, unsigned int cluster)
|
|
{
|
|
/* especially when resuming: make sure power control is set */
|
|
exynos_cpu_powerup(cpu, cluster);
|
|
}
|
|
|
|
static const struct mcpm_platform_ops exynos_power_ops = {
|
|
.cpu_powerup = exynos_cpu_powerup,
|
|
.cluster_powerup = exynos_cluster_powerup,
|
|
.cpu_powerdown_prepare = exynos_cpu_powerdown_prepare,
|
|
.cluster_powerdown_prepare = exynos_cluster_powerdown_prepare,
|
|
.cpu_cache_disable = exynos_cpu_cache_disable,
|
|
.cluster_cache_disable = exynos_cluster_cache_disable,
|
|
.wait_for_powerdown = exynos_wait_for_powerdown,
|
|
.cpu_is_up = exynos_cpu_is_up,
|
|
};
|
|
|
|
/*
|
|
* Enable cluster-level coherency, in preparation for turning on the MMU.
|
|
*/
|
|
static void __naked exynos_pm_power_up_setup(unsigned int affinity_level)
|
|
{
|
|
asm volatile ("\n"
|
|
"cmp r0, #1\n"
|
|
"bxne lr\n"
|
|
"b cci_enable_port_for_self");
|
|
}
|
|
|
|
static const struct of_device_id exynos_dt_mcpm_match[] = {
|
|
{ .compatible = "samsung,exynos5420" },
|
|
{ .compatible = "samsung,exynos5800" },
|
|
{},
|
|
};
|
|
|
|
static void exynos_mcpm_setup_entry_point(void)
|
|
{
|
|
/*
|
|
* U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
|
|
* as part of secondary_cpu_start(). Let's redirect it to the
|
|
* mcpm_entry_point(). This is done during both secondary boot-up as
|
|
* well as system resume.
|
|
*/
|
|
__raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */
|
|
__raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */
|
|
__raw_writel(__pa_symbol(mcpm_entry_point), ns_sram_base_addr + 8);
|
|
}
|
|
|
|
static struct syscore_ops exynos_mcpm_syscore_ops = {
|
|
.resume = exynos_mcpm_setup_entry_point,
|
|
};
|
|
|
|
static int __init exynos_mcpm_init(void)
|
|
{
|
|
struct device_node *node;
|
|
unsigned int value, i;
|
|
int ret;
|
|
|
|
node = of_find_matching_node(NULL, exynos_dt_mcpm_match);
|
|
if (!node)
|
|
return -ENODEV;
|
|
of_node_put(node);
|
|
|
|
if (!cci_probed())
|
|
return -ENODEV;
|
|
|
|
node = of_find_compatible_node(NULL, NULL,
|
|
"samsung,exynos4210-sysram-ns");
|
|
if (!node)
|
|
return -ENODEV;
|
|
|
|
ns_sram_base_addr = of_iomap(node, 0);
|
|
of_node_put(node);
|
|
if (!ns_sram_base_addr) {
|
|
pr_err("failed to map non-secure iRAM base address\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* To increase the stability of KFC reset we need to program
|
|
* the PMU SPARE3 register
|
|
*/
|
|
pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
|
|
|
|
ret = mcpm_platform_register(&exynos_power_ops);
|
|
if (!ret)
|
|
ret = mcpm_sync_init(exynos_pm_power_up_setup);
|
|
if (!ret)
|
|
ret = mcpm_loopback(exynos_cluster_cache_disable); /* turn on the CCI */
|
|
if (ret) {
|
|
iounmap(ns_sram_base_addr);
|
|
return ret;
|
|
}
|
|
|
|
mcpm_smp_set_ops();
|
|
|
|
pr_info("Exynos MCPM support installed\n");
|
|
|
|
/*
|
|
* On Exynos5420/5800 for the A15 and A7 clusters:
|
|
*
|
|
* EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN ensures that all the cores
|
|
* in a cluster are turned off before turning off the cluster L2.
|
|
*
|
|
* EXYNOS5420_USE_ARM_CORE_DOWN_STATE ensures that a cores is powered
|
|
* off before waking it up.
|
|
*
|
|
* EXYNOS5420_USE_L2_COMMON_UP_STATE ensures that cluster L2 will be
|
|
* turned on before the first man is powered up.
|
|
*/
|
|
for (i = 0; i < EXYNOS5420_NR_CLUSTERS; i++) {
|
|
value = pmu_raw_readl(EXYNOS_COMMON_OPTION(i));
|
|
value |= EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN |
|
|
EXYNOS5420_USE_ARM_CORE_DOWN_STATE |
|
|
EXYNOS5420_USE_L2_COMMON_UP_STATE;
|
|
pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i));
|
|
}
|
|
|
|
exynos_mcpm_setup_entry_point();
|
|
|
|
register_syscore_ops(&exynos_mcpm_syscore_ops);
|
|
|
|
return ret;
|
|
}
|
|
|
|
early_initcall(exynos_mcpm_init);
|