linux/arch/arm/boot/dts/omap3-lilly-a83x.dtsi

459 lines
12 KiB
Plaintext

/*
* Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "omap36xx.dtsi"
/ {
model = "INCOstartec LILLY-A83X module (DM3730)";
compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
chosen {
bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
};
memory {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
leds {
compatible = "gpio-leds";
led1 {
label = "lilly-a83x::led1";
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "lilly-a83x";
ti,mcbsp = <&mcbsp2>;
};
reg_vcc3: vcc3 {
compatible = "regulator-fixed";
regulator-name = "VCC3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_vcc3>;
};
};
&omap3_pmx_wkup {
pinctrl-names = "default";
lan9221_pins: pinmux_lan9221_pins {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
>;
};
tsc2048_pins: pinmux_tsc2048_pins {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */
>;
};
mmc1cd_pins: pinmux_mmc1cd_pins {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */
>;
};
};
&omap3_pmx_core {
pinctrl-names = "default";
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */
OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
>;
};
hsusb1_pins: pinmux_hsusb1_pins {
pinctrl-single,pins = <
/* GPIO 182 controls USB-Hub reset. But USB-Phy its
* reset can't be controlled. So we clamp this GPIO to
* high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
*/
OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
>;
};
hsusb_otg_pins: pinmux_hsusb_otg_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
spi2_pins: pinmux_spi2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */
OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */
>;
};
};
&omap3_pmx_core2 {
pinctrl-names = "default";
hsusb1_2_pins: pinmux_hsusb1_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
>;
};
gpio1_pins: pinmux_gpio1_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */
>;
};
};
&gpio1 {
pinctrl-names = "default";
pinctrl-0 = <&gpio1_pins>;
};
&gpio6 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_pins>;
};
&i2c1 {
clock-frequency = <2600000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
};
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&twl {
vmmc1: regulator-vmmc1 {
regulator-always-on;
};
vdd1: regulator-vdd1 {
regulator-always-on;
};
vdd2: regulator-vdd2 {
regulator-always-on;
};
};
&i2c2 {
clock-frequency = <2600000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
};
&i2c3 {
clock-frequency = <2600000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
gpiom1: gpio@20 {
compatible = "mcp,mcp23017";
gpio-controller;
#gpio-cells = <2>;
reg = <0x20>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&uart4 {
status = "disabled";
};
&mmc1 {
cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
cd-inverted;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
cap-sdio-irq;
cap-sd-highspeed;
cap-mmc-highspeed;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&mcspi2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins>;
tsc2046@0 {
reg = <0>; /* CS0 */
compatible = "ti,tsc2046";
interrupt-parent = <&gpio1>;
interrupts = <8 0>; /* boot6 / gpio_8 */
spi-max-frequency = <1000000>;
pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
vcc-supply = <&reg_vcc3>;
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
ti,x-min = /bits/ 16 <300>;
ti,x-max = /bits/ 16 <3000>;
ti,y-min = /bits/ 16 <600>;
ti,y-max = /bits/ 16 <3600>;
ti,x-plate-ohms = /bits/ 16 <80>;
ti,pressure-max = /bits/ 16 <255>;
ti,swap-xy;
wakeup-source;
};
};
&usbhsehci {
phys = <&hsusb1_phy>;
};
&usbhshost {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_2_pins>;
num-ports = <2>;
port1-mode = "ehci-phy";
};
&usb_otg_hs {
pinctrl-names = "default";
pinctrl-0 = <&hsusb_otg_pins>;
interface-type = <0>;
usb-phy = <&usb2_phy>;
phys = <&usb2_phy>;
phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
&mcbsp2 {
status = "okay";
};
&gpmc {
ranges = <0 0 0x30000000 0x1000000>,
<7 0 0x15000000 0x01000000>;
nand@0,0 {
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
/* no elm on omap3 */
gpmc,mux-add-data = <0>;
gpmc,device-width = <2>;
gpmc,wait-pin = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,burst-length= <4>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <100>;
gpmc,cs-wr-off-ns = <100>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <100>;
gpmc,adv-wr-off-ns = <100>;
gpmc,oe-on-ns = <5>;
gpmc,oe-off-ns = <75>;
gpmc,we-on-ns = <5>;
gpmc,we-off-ns = <75>;
gpmc,rd-cycle-ns = <100>;
gpmc,wr-cycle-ns = <100>;
gpmc,access-ns = <60>;
gpmc,page-burst-access-ns = <5>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-delay-ns = <50>;
gpmc,wr-data-mux-bus-ns = <75>;
gpmc,wr-access-ns = <155>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "MLO";
reg = <0 0x80000>;
};
partition@0x80000 {
label = "u-boot";
reg = <0x80000 0x1e0000>;
};
partition@0x260000 {
label = "u-boot-environment";
reg = <0x260000 0x20000>;
};
partition@0x280000 {
label = "kernel";
reg = <0x280000 0x500000>;
};
partition@0x780000 {
label = "filesystem";
reg = <0x780000 0xf880000>;
};
};
ethernet@7,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
bank-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <10>;
gpmc,cs-rd-off-ns = <60>;
gpmc,cs-wr-off-ns = <60>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <10>;
gpmc,adv-wr-off-ns = <10>;
gpmc,oe-on-ns = <10>;
gpmc,oe-off-ns = <60>;
gpmc,we-on-ns = <10>;
gpmc,we-off-ns = <60>;
gpmc,rd-cycle-ns = <100>;
gpmc,wr-cycle-ns = <100>;
gpmc,access-ns = <50>;
gpmc,page-burst-access-ns = <5>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <75>;
gpmc,wr-data-mux-bus-ns = <15>;
gpmc,wr-access-ns = <75>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&reg_vcc3>;
vdd33a-supply = <&reg_vcc3>;
reg-io-width = <4>;
interrupt-parent = <&gpio5>;
interrupts = <1 0x2>;
reg = <7 0 0xff>;
pinctrl-names = "default";
pinctrl-0 = <&lan9221_pins>;
phy-mode = "mii";
};
};