linux/drivers/input/misc/twl6040-vibra.c

402 lines
10 KiB
C

/*
* twl6040-vibra.c - TWL6040 Vibrator driver
*
* Author: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
* Author: Misael Lopez Cruz <misael.lopez@ti.com>
*
* Copyright: (C) 2011 Texas Instruments, Inc.
*
* Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
* Felipe Balbi <felipe.balbi@nokia.com>
* Jari Vanhala <ext-javi.vanhala@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/workqueue.h>
#include <linux/input.h>
#include <linux/mfd/twl6040.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
#define EFFECT_DIR_180_DEG 0x8000
/* Recommended modulation index 85% */
#define TWL6040_VIBRA_MOD 85
#define TWL6040_NUM_SUPPLIES 2
struct vibra_info {
struct device *dev;
struct input_dev *input_dev;
struct workqueue_struct *workqueue;
struct work_struct play_work;
struct mutex mutex;
int irq;
bool enabled;
int weak_speed;
int strong_speed;
int direction;
unsigned int vibldrv_res;
unsigned int vibrdrv_res;
unsigned int viblmotor_res;
unsigned int vibrmotor_res;
struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];
struct twl6040 *twl6040;
};
static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
{
struct vibra_info *info = data;
struct twl6040 *twl6040 = info->twl6040;
u8 status;
status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
if (status & TWL6040_VIBLOCDET) {
dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
TWL6040_VIBENA);
}
if (status & TWL6040_VIBROCDET) {
dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
TWL6040_VIBENA);
}
return IRQ_HANDLED;
}
static void twl6040_vibra_enable(struct vibra_info *info)
{
struct twl6040 *twl6040 = info->twl6040;
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
if (ret) {
dev_err(info->dev, "failed to enable regulators %d\n", ret);
return;
}
twl6040_power(info->twl6040, 1);
if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
/*
* ERRATA: Disable overcurrent protection for at least
* 3ms when enabling vibrator drivers to avoid false
* overcurrent detection
*/
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
TWL6040_VIBENA | TWL6040_VIBCTRL);
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
TWL6040_VIBENA | TWL6040_VIBCTRL);
usleep_range(3000, 3500);
}
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
TWL6040_VIBENA);
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
TWL6040_VIBENA);
info->enabled = true;
}
static void twl6040_vibra_disable(struct vibra_info *info)
{
struct twl6040 *twl6040 = info->twl6040;
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
twl6040_power(info->twl6040, 0);
regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);
info->enabled = false;
}
static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
int speed, int direction)
{
int vpk, max_code;
u8 vibdat;
/* output swing */
vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
(100 * (vibdrv_res + motor_res));
/* 50mV per VIBDAT code step */
max_code = vpk / 50;
if (max_code > TWL6040_VIBDAT_MAX)
max_code = TWL6040_VIBDAT_MAX;
/* scale speed to max allowed code */
vibdat = (u8)((speed * max_code) / USHRT_MAX);
/* 2's complement for direction > 180 degrees */
vibdat *= direction;
return vibdat;
}
static void twl6040_vibra_set_effect(struct vibra_info *info)
{
struct twl6040 *twl6040 = info->twl6040;
u8 vibdatl, vibdatr;
int volt;
/* weak motor */
volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
info->viblmotor_res,
info->weak_speed, info->direction);
/* strong motor */
volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
info->vibrmotor_res,
info->strong_speed, info->direction);
twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
}
static void vibra_play_work(struct work_struct *work)
{
struct vibra_info *info = container_of(work,
struct vibra_info, play_work);
mutex_lock(&info->mutex);
if (info->weak_speed || info->strong_speed) {
if (!info->enabled)
twl6040_vibra_enable(info);
twl6040_vibra_set_effect(info);
} else if (info->enabled)
twl6040_vibra_disable(info);
mutex_unlock(&info->mutex);
}
static int vibra_play(struct input_dev *input, void *data,
struct ff_effect *effect)
{
struct vibra_info *info = input_get_drvdata(input);
int ret;
/* Do not allow effect, while the routing is set to use audio */
ret = twl6040_get_vibralr_status(info->twl6040);
if (ret & TWL6040_VIBSEL) {
dev_info(&input->dev, "Vibra is configured for audio\n");
return -EBUSY;
}
info->weak_speed = effect->u.rumble.weak_magnitude;
info->strong_speed = effect->u.rumble.strong_magnitude;
info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
ret = queue_work(info->workqueue, &info->play_work);
if (!ret) {
dev_info(&input->dev, "work is already on queue\n");
return ret;
}
return 0;
}
static void twl6040_vibra_close(struct input_dev *input)
{
struct vibra_info *info = input_get_drvdata(input);
cancel_work_sync(&info->play_work);
mutex_lock(&info->mutex);
if (info->enabled)
twl6040_vibra_disable(info);
mutex_unlock(&info->mutex);
}
#ifdef CONFIG_PM_SLEEP
static int twl6040_vibra_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct vibra_info *info = platform_get_drvdata(pdev);
mutex_lock(&info->mutex);
if (info->enabled)
twl6040_vibra_disable(info);
mutex_unlock(&info->mutex);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
static int twl6040_vibra_probe(struct platform_device *pdev)
{
struct device *twl6040_core_dev = pdev->dev.parent;
struct device_node *twl6040_core_node;
struct vibra_info *info;
int vddvibl_uV = 0;
int vddvibr_uV = 0;
int error;
twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
"vibra");
if (!twl6040_core_node) {
dev_err(&pdev->dev, "parent of node is missing?\n");
return -EINVAL;
}
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
of_node_put(twl6040_core_node);
dev_err(&pdev->dev, "couldn't allocate memory\n");
return -ENOMEM;
}
info->dev = &pdev->dev;
info->twl6040 = dev_get_drvdata(pdev->dev.parent);
of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
&info->vibldrv_res);
of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
&info->vibrdrv_res);
of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
&info->viblmotor_res);
of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
&info->vibrmotor_res);
of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
of_node_put(twl6040_core_node);
if ((!info->vibldrv_res && !info->viblmotor_res) ||
(!info->vibrdrv_res && !info->vibrmotor_res)) {
dev_err(info->dev, "invalid vibra driver/motor resistance\n");
return -EINVAL;
}
info->irq = platform_get_irq(pdev, 0);
if (info->irq < 0) {
dev_err(info->dev, "invalid irq\n");
return -EINVAL;
}
mutex_init(&info->mutex);
error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
twl6040_vib_irq_handler, 0,
"twl6040_irq_vib", info);
if (error) {
dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
return error;
}
info->supplies[0].supply = "vddvibl";
info->supplies[1].supply = "vddvibr";
/*
* When booted with Device tree the regulators are attached to the
* parent device (twl6040 MFD core)
*/
error = devm_regulator_bulk_get(twl6040_core_dev,
ARRAY_SIZE(info->supplies),
info->supplies);
if (error) {
dev_err(info->dev, "couldn't get regulators %d\n", error);
return error;
}
if (vddvibl_uV) {
error = regulator_set_voltage(info->supplies[0].consumer,
vddvibl_uV, vddvibl_uV);
if (error) {
dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
error);
return error;
}
}
if (vddvibr_uV) {
error = regulator_set_voltage(info->supplies[1].consumer,
vddvibr_uV, vddvibr_uV);
if (error) {
dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
error);
return error;
}
}
INIT_WORK(&info->play_work, vibra_play_work);
info->input_dev = devm_input_allocate_device(&pdev->dev);
if (!info->input_dev) {
dev_err(info->dev, "couldn't allocate input device\n");
return -ENOMEM;
}
input_set_drvdata(info->input_dev, info);
info->input_dev->name = "twl6040:vibrator";
info->input_dev->id.version = 1;
info->input_dev->dev.parent = pdev->dev.parent;
info->input_dev->close = twl6040_vibra_close;
__set_bit(FF_RUMBLE, info->input_dev->ffbit);
error = input_ff_create_memless(info->input_dev, NULL, vibra_play);
if (error) {
dev_err(info->dev, "couldn't register vibrator to FF\n");
return error;
}
error = input_register_device(info->input_dev);
if (error) {
dev_err(info->dev, "couldn't register input device\n");
return error;
}
platform_set_drvdata(pdev, info);
return 0;
}
static struct platform_driver twl6040_vibra_driver = {
.probe = twl6040_vibra_probe,
.driver = {
.name = "twl6040-vibra",
.owner = THIS_MODULE,
.pm = &twl6040_vibra_pm_ops,
},
};
module_platform_driver(twl6040_vibra_driver);
MODULE_ALIAS("platform:twl6040-vibra");
MODULE_DESCRIPTION("TWL6040 Vibra driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");