mirror of https://gitee.com/openkylin/linux.git
364 lines
9.0 KiB
ArmAsm
364 lines
9.0 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mach-omap1/sleep.S
|
|
*
|
|
* Low-level OMAP730/1510/1610 sleep/wakeUp support
|
|
*
|
|
* Initial SA1110 code:
|
|
* Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
|
|
*
|
|
* Adapted for PXA by Nicolas Pitre:
|
|
* Copyright (c) 2002 Monta Vista Software, Inc.
|
|
*
|
|
* Support for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/arch/io.h>
|
|
#include <asm/arch/pm.h>
|
|
|
|
.text
|
|
|
|
|
|
/*
|
|
* Forces OMAP into deep sleep state
|
|
*
|
|
* omapXXXX_cpu_suspend()
|
|
*
|
|
* The values of the registers ARM_IDLECT1 and ARM_IDLECT2 are passed
|
|
* as arg0 and arg1 from caller. arg0 is stored in register r0 and arg1
|
|
* in register r1.
|
|
*
|
|
* Note: This code get's copied to internal SRAM at boot. When the OMAP
|
|
* wakes up it continues execution at the point it went to sleep.
|
|
*
|
|
* Note: Because of errata work arounds we have processor specific functions
|
|
* here. They are mostly the same, but slightly different.
|
|
*
|
|
*/
|
|
|
|
#if defined(CONFIG_ARCH_OMAP730)
|
|
ENTRY(omap730_cpu_suspend)
|
|
|
|
@ save registers on stack
|
|
stmfd sp!, {r0 - r12, lr}
|
|
|
|
@ Drain write cache
|
|
mov r4, #0
|
|
mcr p15, 0, r0, c7, c10, 4
|
|
nop
|
|
|
|
@ load base address of Traffic Controller
|
|
mov r6, #TCMIF_ASM_BASE & 0xff000000
|
|
orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
|
|
orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
|
|
|
|
@ prepare to put SDRAM into self-refresh manually
|
|
ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
|
|
orr r9, r7, #SELF_REFRESH_MODE & 0xff000000
|
|
orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff
|
|
str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ prepare to put EMIFS to Sleep
|
|
ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff
|
|
str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ load base address of ARM_IDLECT1 and ARM_IDLECT2
|
|
mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
|
|
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
|
|
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
|
|
|
|
@ turn off clock domains
|
|
@ do not disable PERCK (0x04)
|
|
mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
|
|
orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
|
|
strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
|
|
|
|
@ request ARM idle
|
|
mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
|
|
orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
|
|
strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
|
|
|
|
@ disable instruction cache
|
|
mrc p15, 0, r9, c1, c0, 0
|
|
bic r2, r9, #0x1000
|
|
mcr p15, 0, r2, c1, c0, 0
|
|
nop
|
|
|
|
/*
|
|
* Let's wait for the next wake up event to wake us up. r0 can't be
|
|
* used here because r0 holds ARM_IDLECT1
|
|
*/
|
|
mov r2, #0
|
|
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
|
|
/*
|
|
* omap730_cpu_suspend()'s resume point.
|
|
*
|
|
* It will just start executing here, so we'll restore stuff from the
|
|
* stack.
|
|
*/
|
|
@ re-enable Icache
|
|
mcr p15, 0, r9, c1, c0, 0
|
|
|
|
@ reset the ARM_IDLECT1 and ARM_IDLECT2.
|
|
strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
|
|
strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
|
|
|
|
@ Restore EMIFF controls
|
|
str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
|
|
str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ restore regs and return
|
|
ldmfd sp!, {r0 - r12, pc}
|
|
|
|
ENTRY(omap730_cpu_suspend_sz)
|
|
.word . - omap730_cpu_suspend
|
|
#endif /* CONFIG_ARCH_OMAP730 */
|
|
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
ENTRY(omap1510_cpu_suspend)
|
|
|
|
@ save registers on stack
|
|
stmfd sp!, {r0 - r12, lr}
|
|
|
|
@ load base address of Traffic Controller
|
|
mov r4, #TCMIF_ASM_BASE & 0xff000000
|
|
orr r4, r4, #TCMIF_ASM_BASE & 0x00ff0000
|
|
orr r4, r4, #TCMIF_ASM_BASE & 0x0000ff00
|
|
|
|
@ work around errata of OMAP1510 PDE bit for TC shut down
|
|
@ clear PDE bit
|
|
ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
bic r5, r5, #PDE_BIT & 0xff
|
|
str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ set PWD_EN bit
|
|
and r5, r5, #PWD_EN_BIT & 0xff
|
|
str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ prepare to put SDRAM into self-refresh manually
|
|
ldr r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
|
|
orr r5, r5, #SELF_REFRESH_MODE & 0xff000000
|
|
orr r5, r5, #SELF_REFRESH_MODE & 0x000000ff
|
|
str r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ prepare to put EMIFS to Sleep
|
|
ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
orr r5, r5, #IDLE_EMIFS_REQUEST & 0xff
|
|
str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ load base address of ARM_IDLECT1 and ARM_IDLECT2
|
|
mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
|
|
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
|
|
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
|
|
|
|
@ turn off clock domains
|
|
mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
|
|
orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
|
|
strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
|
|
|
|
@ request ARM idle
|
|
mov r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff
|
|
orr r3, r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff00
|
|
strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
|
|
|
|
mov r5, #IDLE_WAIT_CYCLES & 0xff
|
|
orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00
|
|
l_1510_2:
|
|
subs r5, r5, #1
|
|
bne l_1510_2
|
|
/*
|
|
* Let's wait for the next wake up event to wake us up. r0 can't be
|
|
* used here because r0 holds ARM_IDLECT1
|
|
*/
|
|
mov r2, #0
|
|
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
|
|
/*
|
|
* omap1510_cpu_suspend()'s resume point.
|
|
*
|
|
* It will just start executing here, so we'll restore stuff from the
|
|
* stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
|
|
*/
|
|
strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
|
|
strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
|
|
|
|
@ restore regs and return
|
|
ldmfd sp!, {r0 - r12, pc}
|
|
|
|
ENTRY(omap1510_cpu_suspend_sz)
|
|
.word . - omap1510_cpu_suspend
|
|
#endif /* CONFIG_ARCH_OMAP15XX */
|
|
|
|
#if defined(CONFIG_ARCH_OMAP16XX)
|
|
ENTRY(omap1610_cpu_suspend)
|
|
|
|
@ save registers on stack
|
|
stmfd sp!, {r0 - r12, lr}
|
|
|
|
@ Drain write cache
|
|
mov r4, #0
|
|
mcr p15, 0, r0, c7, c10, 4
|
|
nop
|
|
|
|
@ Load base address of Traffic Controller
|
|
mov r6, #TCMIF_ASM_BASE & 0xff000000
|
|
orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
|
|
orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
|
|
|
|
@ Prepare to put SDRAM into self-refresh manually
|
|
ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
|
|
orr r9, r7, #SELF_REFRESH_MODE & 0xff000000
|
|
orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff
|
|
str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ Prepare to put EMIFS to Sleep
|
|
ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff
|
|
str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ Load base address of ARM_IDLECT1 and ARM_IDLECT2
|
|
mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
|
|
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
|
|
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
|
|
|
|
@ Turn off clock domains
|
|
@ Do not disable PERCK (0x04)
|
|
mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
|
|
orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
|
|
strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
|
|
|
|
@ Request ARM idle
|
|
mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff
|
|
orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00
|
|
strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
|
|
|
|
/*
|
|
* Let's wait for the next wake up event to wake us up. r0 can't be
|
|
* used here because r0 holds ARM_IDLECT1
|
|
*/
|
|
mov r2, #0
|
|
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
|
|
|
|
@ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions
|
|
@ according to this formula:
|
|
@ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV
|
|
@ Max DPLL_MULT = 18
|
|
@ DPLL_DIV = 1
|
|
@ ARMDIV = 1
|
|
@ => 74 nop-instructions
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop @10
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop @20
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop @30
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop @40
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop @50
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop @60
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop @70
|
|
nop
|
|
nop
|
|
nop
|
|
nop @74
|
|
/*
|
|
* omap1610_cpu_suspend()'s resume point.
|
|
*
|
|
* It will just start executing here, so we'll restore stuff from the
|
|
* stack.
|
|
*/
|
|
@ Restore the ARM_IDLECT1 and ARM_IDLECT2.
|
|
strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
|
|
strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
|
|
|
|
@ Restore EMIFF controls
|
|
str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
|
|
str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
|
|
|
|
@ Restore regs and return
|
|
ldmfd sp!, {r0 - r12, pc}
|
|
|
|
ENTRY(omap1610_cpu_suspend_sz)
|
|
.word . - omap1610_cpu_suspend
|
|
#endif /* CONFIG_ARCH_OMAP16XX */
|