mirror of https://gitee.com/openkylin/linux.git
309 lines
9.1 KiB
C
309 lines
9.1 KiB
C
/*
|
|
* xHCI host controller driver
|
|
*
|
|
* Copyright (C) 2008 Intel Corp.
|
|
*
|
|
* Author: Sarah Sharp
|
|
* Some code borrowed from the Linux EHCI driver.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "xhci.h"
|
|
|
|
static void xhci_hub_descriptor(struct xhci_hcd *xhci,
|
|
struct usb_hub_descriptor *desc)
|
|
{
|
|
int ports;
|
|
u16 temp;
|
|
|
|
ports = HCS_MAX_PORTS(xhci->hcs_params1);
|
|
|
|
/* USB 3.0 hubs have a different descriptor, but we fake this for now */
|
|
desc->bDescriptorType = 0x29;
|
|
desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */
|
|
desc->bHubContrCurrent = 0;
|
|
|
|
desc->bNbrPorts = ports;
|
|
temp = 1 + (ports / 8);
|
|
desc->bDescLength = 7 + 2 * temp;
|
|
|
|
/* Why does core/hcd.h define bitmap? It's just confusing. */
|
|
memset(&desc->DeviceRemovable[0], 0, temp);
|
|
memset(&desc->DeviceRemovable[temp], 0xff, temp);
|
|
|
|
/* Ugh, these should be #defines, FIXME */
|
|
/* Using table 11-13 in USB 2.0 spec. */
|
|
temp = 0;
|
|
/* Bits 1:0 - support port power switching, or power always on */
|
|
if (HCC_PPC(xhci->hcc_params))
|
|
temp |= 0x0001;
|
|
else
|
|
temp |= 0x0002;
|
|
/* Bit 2 - root hubs are not part of a compound device */
|
|
/* Bits 4:3 - individual port over current protection */
|
|
temp |= 0x0008;
|
|
/* Bits 6:5 - no TTs in root ports */
|
|
/* Bit 7 - no port indicators */
|
|
desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp);
|
|
}
|
|
|
|
static unsigned int xhci_port_speed(unsigned int port_status)
|
|
{
|
|
if (DEV_LOWSPEED(port_status))
|
|
return 1 << USB_PORT_FEAT_LOWSPEED;
|
|
if (DEV_HIGHSPEED(port_status))
|
|
return 1 << USB_PORT_FEAT_HIGHSPEED;
|
|
if (DEV_SUPERSPEED(port_status))
|
|
return 1 << USB_PORT_FEAT_SUPERSPEED;
|
|
/*
|
|
* FIXME: Yes, we should check for full speed, but the core uses that as
|
|
* a default in portspeed() in usb/core/hub.c (which is the only place
|
|
* USB_PORT_FEAT_*SPEED is used).
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* These bits are Read Only (RO) and should be saved and written to the
|
|
* registers: 0, 3, 10:13, 30
|
|
* connect status, over-current status, port speed, and device removable.
|
|
* connect status and port speed are also sticky - meaning they're in
|
|
* the AUX well and they aren't changed by a hot, warm, or cold reset.
|
|
*/
|
|
#define XHCI_PORT_RO ((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
|
|
/*
|
|
* These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
|
|
* bits 5:8, 9, 14:15, 25:27
|
|
* link state, port power, port indicator state, "wake on" enable state
|
|
*/
|
|
#define XHCI_PORT_RWS ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
|
|
/*
|
|
* These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
|
|
* bit 4 (port reset)
|
|
*/
|
|
#define XHCI_PORT_RW1S ((1<<4))
|
|
/*
|
|
* These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
|
|
* bits 1, 17, 18, 19, 20, 21, 22, 23
|
|
* port enable/disable, and
|
|
* change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
|
|
* over-current, reset, link state, and L1 change
|
|
*/
|
|
#define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17))
|
|
/*
|
|
* Bit 16 is RW, and writing a '1' to it causes the link state control to be
|
|
* latched in
|
|
*/
|
|
#define XHCI_PORT_RW ((1<<16))
|
|
/*
|
|
* These bits are Reserved Zero (RsvdZ) and zero should be written to them:
|
|
* bits 2, 24, 28:31
|
|
*/
|
|
#define XHCI_PORT_RZ ((1<<2) | (1<<24) | (0xf<<28))
|
|
|
|
/*
|
|
* Given a port state, this function returns a value that would result in the
|
|
* port being in the same state, if the value was written to the port status
|
|
* control register.
|
|
* Save Read Only (RO) bits and save read/write bits where
|
|
* writing a 0 clears the bit and writing a 1 sets the bit (RWS).
|
|
* For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
|
|
*/
|
|
static u32 xhci_port_state_to_neutral(u32 state)
|
|
{
|
|
/* Save read-only status and port state */
|
|
return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
|
|
}
|
|
|
|
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
|
|
u16 wIndex, char *buf, u16 wLength)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
int ports;
|
|
unsigned long flags;
|
|
u32 temp, status;
|
|
int retval = 0;
|
|
u32 __iomem *addr;
|
|
char *port_change_bit;
|
|
|
|
ports = HCS_MAX_PORTS(xhci->hcs_params1);
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
switch (typeReq) {
|
|
case GetHubStatus:
|
|
/* No power source, over-current reported per port */
|
|
memset(buf, 0, 4);
|
|
break;
|
|
case GetHubDescriptor:
|
|
xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf);
|
|
break;
|
|
case GetPortStatus:
|
|
if (!wIndex || wIndex > ports)
|
|
goto error;
|
|
wIndex--;
|
|
status = 0;
|
|
addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
|
|
temp = xhci_readl(xhci, addr);
|
|
xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp);
|
|
|
|
/* wPortChange bits */
|
|
if (temp & PORT_CSC)
|
|
status |= 1 << USB_PORT_FEAT_C_CONNECTION;
|
|
if (temp & PORT_PEC)
|
|
status |= 1 << USB_PORT_FEAT_C_ENABLE;
|
|
if ((temp & PORT_OCC))
|
|
status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
|
|
/*
|
|
* FIXME ignoring suspend, reset, and USB 2.1/3.0 specific
|
|
* changes
|
|
*/
|
|
if (temp & PORT_CONNECT) {
|
|
status |= 1 << USB_PORT_FEAT_CONNECTION;
|
|
status |= xhci_port_speed(temp);
|
|
}
|
|
if (temp & PORT_PE)
|
|
status |= 1 << USB_PORT_FEAT_ENABLE;
|
|
if (temp & PORT_OC)
|
|
status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
|
|
if (temp & PORT_RESET)
|
|
status |= 1 << USB_PORT_FEAT_RESET;
|
|
if (temp & PORT_POWER)
|
|
status |= 1 << USB_PORT_FEAT_POWER;
|
|
xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
|
|
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
|
|
break;
|
|
case SetPortFeature:
|
|
wIndex &= 0xff;
|
|
if (!wIndex || wIndex > ports)
|
|
goto error;
|
|
wIndex--;
|
|
addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff);
|
|
temp = xhci_readl(xhci, addr);
|
|
temp = xhci_port_state_to_neutral(temp);
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_POWER:
|
|
/*
|
|
* Turn on ports, even if there isn't per-port switching.
|
|
* HC will report connect events even before this is set.
|
|
* However, khubd will ignore the roothub events until
|
|
* the roothub is registered.
|
|
*/
|
|
xhci_writel(xhci, temp | PORT_POWER, addr);
|
|
|
|
temp = xhci_readl(xhci, addr);
|
|
xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
|
|
break;
|
|
case USB_PORT_FEAT_RESET:
|
|
temp = (temp | PORT_RESET);
|
|
xhci_writel(xhci, temp, addr);
|
|
|
|
temp = xhci_readl(xhci, addr);
|
|
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
|
|
break;
|
|
default:
|
|
goto error;
|
|
}
|
|
temp = xhci_readl(xhci, addr); /* unblock any posted writes */
|
|
break;
|
|
case ClearPortFeature:
|
|
if (!wIndex || wIndex > ports)
|
|
goto error;
|
|
wIndex--;
|
|
addr = &xhci->op_regs->port_status_base +
|
|
NUM_PORT_REGS*(wIndex & 0xff);
|
|
temp = xhci_readl(xhci, addr);
|
|
temp = xhci_port_state_to_neutral(temp);
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_C_RESET:
|
|
status = PORT_RC;
|
|
port_change_bit = "reset";
|
|
break;
|
|
case USB_PORT_FEAT_C_CONNECTION:
|
|
status = PORT_CSC;
|
|
port_change_bit = "connect";
|
|
break;
|
|
case USB_PORT_FEAT_C_OVER_CURRENT:
|
|
status = PORT_OCC;
|
|
port_change_bit = "over-current";
|
|
break;
|
|
default:
|
|
goto error;
|
|
}
|
|
/* Change bits are all write 1 to clear */
|
|
xhci_writel(xhci, temp | status, addr);
|
|
temp = xhci_readl(xhci, addr);
|
|
xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n",
|
|
port_change_bit, wIndex, temp);
|
|
temp = xhci_readl(xhci, addr); /* unblock any posted writes */
|
|
break;
|
|
default:
|
|
error:
|
|
/* "stall" on error */
|
|
retval = -EPIPE;
|
|
}
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Returns 0 if the status hasn't changed, or the number of bytes in buf.
|
|
* Ports are 0-indexed from the HCD point of view,
|
|
* and 1-indexed from the USB core pointer of view.
|
|
* xHCI instances can have up to 127 ports, so FIXME if you see more than 15.
|
|
*
|
|
* Note that the status change bits will be cleared as soon as a port status
|
|
* change event is generated, so we use the saved status from that event.
|
|
*/
|
|
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
|
|
{
|
|
unsigned long flags;
|
|
u32 temp, status;
|
|
int i, retval;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
int ports;
|
|
u32 __iomem *addr;
|
|
|
|
ports = HCS_MAX_PORTS(xhci->hcs_params1);
|
|
|
|
/* Initial status is no changes */
|
|
buf[0] = 0;
|
|
status = 0;
|
|
if (ports > 7) {
|
|
buf[1] = 0;
|
|
retval = 2;
|
|
} else {
|
|
retval = 1;
|
|
}
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
/* For each port, did anything change? If so, set that bit in buf. */
|
|
for (i = 0; i < ports; i++) {
|
|
addr = &xhci->op_regs->port_status_base +
|
|
NUM_PORT_REGS*i;
|
|
temp = xhci_readl(xhci, addr);
|
|
if (temp & (PORT_CSC | PORT_PEC | PORT_OCC)) {
|
|
if (i < 7)
|
|
buf[0] |= 1 << (i + 1);
|
|
else
|
|
buf[1] |= 1 << (i - 7);
|
|
status = 1;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return status ? retval : 0;
|
|
}
|